Features:
Superior Jitter Performance (less than 0.25 ps RMS,
12 kHz - 20 MHz)
Frequencies from 50 MHz to 1.4 GHz
Designed for a short 2 week cycle time
Applications:
Telecommunications such as SONET / SDH / DWDM / FEC /
SERDES / OC-3 thru OC-192
Wireless base stations / WLAN / Gigabit Ethernet
Avionic ight controls and military communications
MtronPTI
Corporate Headquarters
100 Douglas Avenue
PO Box 630
Yankton, SD 57078-0630
1-800-762-8800
www.mtronpti.com
Introduces
M210x Series
LVPECL/LVDS/CML Clock Oscillator
Featuring QiK ChipTM Technology
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specic requirements: MtronPTI 1-800-762-8800.
Applications Note:
The MtronPTI M210x series of clock oscillators, featuring QiK ChipTM technology, provides for extremely low jitter of 0.30 ps RMS.
For applications requiring low jitter, frequencies from 150 MHz to 1.4 GHz are available. LVPECL, LVDS, or CML compatible
outputs, as well as operating voltage of 1.8 V, 2.5 V, and 3.3 V are also options on the M210x.
The M210x is available at a stability of ± 20 ppm, all-inclusive, over the industrial operating temperature range of -40°C to +85°C.
By providing this specication, the M210x will perform at a much superior level than SAW based oscillator designs (Figure 1).
This level of performance is achieved by utilizing a precision AT-cut crystal. An enable/disable function is also an available option
on the M210x. The internal 0.01 µF by-pass capacitor also assures optimum noise suppression on the supply voltage pad.
The superior integrated jitter performance of 0.3 pS RMS makes the M210x suitable for 10 Gig-E, broadband networks, network
switches, SONET, SDH, SERDES, DWDM, FEC, WLAN, and OC-3 thru OC-192 systems. The M210x is available in a six-pad or
nine-pad, 5x7x1.9 mm, leadless, ceramic, surface mount package (see page 4) that is RoHS and 260°C reow compatible. (No
PCB traces should be located directly under the 5x7 product). The M210x oscillators offer a pin 1 tristate for backward compat-
ibility to many of the existing products in the industry from Vectron, Epson, and others.
For superior performance in a high frequency clock oscillator, the M210x is a logical choice for designers. The unique design
architecture allows the M210x fast turn around on engineering design samples, as well as production quantities in 2 weeks or
less.
Figure 1. Frequency/Temperature Curves, M210x vs. SAW Based Oscillator Devices
2
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specic requirements: MtronPTI 1-800-762-8800.
3
M210x Series LVPECL/LVDS/CML Clock Oscillator – 3.3/2.5/1.8 Volt – 5x7 mm
Product Features
Product Description
Product Applications
Product Ordering Information
 Featuring QiK ChipTM Technology
From order to ship in 2 weeks
 Superior Jitter Performance (less than 0.25 ps RMS, 12 kHz - 20 MHz)
SAW replacement - better performance
 Frequencies from 50 MHz to 1.4 GHz
M2100Sxxx, M2101Sxxx, M2102Sxxx & M2103Sxxx -
Contact factory for datasheets.
 Telecommunications such as SONET / SDH /
DWDM / FEC / SERDES / OC-3 thru OC-192
 1-2-4-10 Gigabit Fibre Channel
 Wireless Base Stations / WLAN / Gigabit Ethernet
 Avionic Flight Controls
 Military Communications
 Clock and Data Recovery
 SD/HD Video
 FPGA/ASIC Clock Generation
 Test and Measurement Equipment
The 210x series of oscillators are 5x7 mm oscillators designed with the QiK ChipTM technology. The QiK ChipTM
technology was specically designed for crystal based oscillators to provide low jitter performance (as low as
0.25 ps RMS) and a wide range of frequency support (150.00 MHz to 1.4 GHz) and provides a breakthrough in
lean manufacturing enabling product to be provided in less than 2 weeks. The M210x provides design engi-
neers with the stability needed in their advanced applications and supports the need for parts to be supplied
quickly so that the rest of their circuit design can be solidied.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specic requirements: MtronPTI 1-800-762-8800.
4
M210x Series LVPECL/LVDS/CML Clock Oscillator – 3.3/2.5/1.8 Volt – 5x7 mm
Performance Characteristics
PARAMETER Symbol Min. Typ. Max. Units Condition/Notes
Frequency Range F 50 1400 MHz See Note 1
Operating Temperature T
A
(See ordering information)
Storage Temperature T
S
-55 +125 °C
Frequency Stability ∆F/F (See ordering information) See Note 2
Aging
1st Year -3 +3 ppm
Thereafter (per year) -1 +1 ppm
Supply Voltage Vcc 1.71 1.8 1.89 V LVDS/CML
2.375 2.5 2.625 V
3.135 3.3 3.465 V
Input Current Icc 125 mA LVPECL/LVDS/CML
Load See Note 3
50 Ohms to (Vcc -2) Vdc LVPECL Waveform
100 Ohm differential load LVDS/CML Waveform
Symmetry (Duty Cycle) 45 55 % LVPECL – Vdd-1.3 V
LVDS – 1.25 V
Output Skew 20 ps LVPECL
15 ps CML
20 ps LVDS
Differential Voltage Vod 250 350 450 mV LVDS
Vod 0.7 .095 1.20 Vpp CML
Common Mode
Output Voltage Vcm 1.2 V LVDS
Logic “1” Level Voh Vcc -1.02 V LVPECL
Logic “0” Level Vol Vcc -1.63 V LVPECL
Rise/Fall Time Tr/Tf 0.23 0.50 ns @ 20/80% LVPECL, LVDS, CML
Enable Function 80% Vcc min or N/C: Output active Output Option B or G
0.5V max: Output disables to high-Z
0.5V max or N/C: Output active Output Option S or M
80% Vcc min: Output disables to high-Z
Start up Time 10 ms
Phase Jitter
@ 622.08 MHz φJ 0.25 ps RMS Integrated 12 kHz – 20 MHz
Phase Noise @ 622.08 MHz
10 Hz -60 dBc/Hz
100 Hz -97 dBc/Hz
1 KHz -107 dBc/Hz
10 KHz -116 dBc/Hz
100 KHz -121 dBc/Hz
1 MHz -134 dBc/Hz
10 MHz -146 dBc/Hz
Electrical Specifications
100 MHz -148 dBc/Hz
Mechanical Shock Per MIL-STD-202, Method 213, Condition C (100 g’s, 6 mS duration, ½ sinewave)
Vibration Per MIL-STD-202, Method 201 & 204 (10 g’s from 10-2000 Hz)
Hermeticity Per MIL-STD-202, Method 112, (1x10
-8
atm. cc/s of Helium)
Thermal Cycle Per MIL-STD-883, Method 1010, Condition B (-55°C to +125°C, 15 min. dwell, 10 cycles)
Solderability Per EIAJ-STD-002
Environmental
Max Soldering Conditions See solder profile, Figure 1
Note 1: Contact factory for standard frequency availability over 945 MHz
Note 2: Stability is inclusive of initial tolerance, deviation over temperature, shock, vibration, supply voltage, and aging for one
year at 50°C mean ambient temperature.
Note 3: See Load Circuit Diagram in this Datasheet. Consult factory with nonstandard output load requirements.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specic requirements: MtronPTI 1-800-762-8800.
5
M210x Series LVPECL/LVDS/CML Clock Oscillator – 3.3/2.5/1.8 Volt – 5x7 mm
Phase Noise Plot
Output Waveform
Output Waveform: LVDS/CML/PECL
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specic requirements: MtronPTI 1-800-762-8800.
6
M210x Series LVPECL/LVDS/CML Clock Oscillator – 3.3/2.5/1.8 Volt – 5x7 mm
Product Dimension & Pinout Information
6 Pad Standard Option
9 Pad Option
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specic requirements: MtronPTI 1-800-762-8800.
7
M210x Series LVPECL/LVDS/CML Clock Oscillator – 3.3/2.5/1.8 Volt – 5x7 mm
Handling Information
Quality Parameters
Part Marking Guide
Although protection circuitry has been designed into the M210x oscillator, proper precautions should be taken to
avoid exposure to electrostatic discharge (ESD) during handling and mounting. MtronPTI utilizes a human-body
model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation.
ESD voltage thresholds are dependent on the circuit parameters used to dene the mode. Although no industry-
wide standard has been adopted for the CDM, a standard HBM (resistance = 1500 Ω, capacitance = 100 pF) is
widely used and therefore can be used for comparison purposes. The HBM ESD threshold presented here was
obtained using these circuit parameters.
Line 1: Model Number
Line 2: Frequency
Line 3: Date Code
Line 4: Pin 1 Indicator / MtronPTI
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specic requirements: MtronPTI 1-800-762-8800.
8
M210x Series LVPECL/LVDS/CML Clock Oscillator – 3.3/2.5/1.8 Volt – 5x7 mm
Maximum Soldering Conditions
Tape & Reel Specications
(all measurements
are in mm) A B C D E F G H I J K L
M210x 6.51 9.29 1.5 7.5 2.8 4 8/12 16 180-330 13 21 60-100
Standard Tape and Reel: 1000 parts per reel
Solder Conditions
Note: Exceeding these limits may damage the device.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specic requirements: MtronPTI 1-800-762-8800.
9
M210x Series LVPECL/LVDS/CML Clock Oscillator – 3.3/2.5/1.8 Volt – 5x7 mm
For custom products or additional specications contact our sales team at
800.762.8800 (toll free) or 605.665.9321
For more information on this product visit the MtronPTI website at
www.mtronpti.com
Typical Test Circuit & Load Circuit Diagrams
Product Revision Table
Date Revision PCN Number Details of Revision
7/20/07 A 10118 IC Revision to improve phase noise and electrical performance
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specic requirements: MtronPTI 1-800-762-8800.
10
M210x Series LVPECL/LVDS/CML Clock Oscillator – 3.3/2.5/1.8 Volt – 5x7 mm
Orlando
2525 Shader Rd
Orlando, FL 32804 USA
Phone: 407-298-2000
Fax: 407-293-2979
Email: SalesORL@mtronpti.com
Yankton
PO Box 630
Yankton, SD 57078-0630 USA
Phone: 605-665-9321
Toll Free: 800-762-8800
Fax: 605-665-1709
Email: SalesYKT@mtronpti.com
Europe
The Netherlands
Phone: 31-40-368-6818
Fax: 011-31-40-368-3501
Email: SalesEU@mtronpti.com
Asia Pacic
1104 Shanghai Industrial
Investment Building
48-62 Hennessy Road
Wanchai, Hong Kong, China
Phone: 852-2866-8023
Fax: 852-2529-1822
Email: SalesHK@mtronpti.com
Connecticut
755 Main Street
Suite 2B, Building 2
Monroe, CT 06470 USA
Phone: 800.762.8800
Fax: 203.452.9435
Email: MilSales@mtronpti.com
Santa Clara
1495 Franklin Street
Santa Clara, CA 95050 USA
Phone: 408.395.0700
Fax: 408.395.8074
Email: SalesCA@mtronpti.com