Film Capacitors Metallized Polypropylene Film Capacitors (MFP) Series/Type: Date: B32632 ... B32634 August 2004 (c) EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Association), unless otherwise agreed. Metallized polypropylene film capacitors (MFP) High pulse (wound) Typical applications Smoothing High-frequency AC loads TV (flyback) Climatic Max. operating temperature: 110 C Climatic category (IEC 60068-1): 55/100/56 Construction Dielectric: polypropylene (PP) Film metallized on one side and metal foils internally connected in series Contact layer of sprayed metal Wound capacitor technology Epoxy resin coating (UL 94 V-0) Features Highest possible contact reliability Very high pulse strength Self-healing properties Terminals Crimped wire leads, lead-free tinned, lead length (6 1 mm) or min. 20 mm Double crimped wire leads, lead-free tinned Straight wire leads, lead-free tinned, lead length (17 3 mm) Different lead spacings (reduced and enlarged) available, lead length (6 1 mm) Marking Manufacturer's logo, style and type (P6xx), rated capacitance (coded), capacitance tolerance (code letter), rated DC voltage, date of manufacture (coded) Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For notes on taping, refer to chapter "Taping and packing". 2 B32632 ... B32634 B32632 ... B32634 High pulse (wound) Dimensional drawings Detail of double crimped version Dimensions in mm Lead spacing 0.8 Lead diameter Type d1 15.0 22.5 27.5 0.8 0.8 0.8 B32632 B32633 B32634 3 B32632 ... B32634 High pulse (wound) Overview of available types Lead spacing 15.0 mm 22.5 mm Type B32632 VR (VDC) 630 1250 1600 2000 3000 B32633 630 1250 1600 2000 2500 3000 Vrms (VAC) 300 450 450 500 800 300 450 450 500 750 800 CR (nF) 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 Lead configurations Series Standard Reduced Enlarged Straight Double crimped B32632 B32633 B32634 15 mm 22.5 mm 27.5 mm 7.5 / 10 / 12.5 mm 15 / 17.5 / 20 mm 25 mm 17.5 mm 25 mm 15 mm 22.5 mm 27.5 mm 15 mm 22.5 mm 27.5 mm 4 B32632 ... B32634 High pulse (wound) Overview of available types Lead spacing 27.5 mm Type B32634 VR (VDC) 630 1250 1600 2000 Vrms (VAC) 300 450 450 500 CR (nF) 10 15 22 33 47 68 100 150 220 330 Lead configurations Series Standard Reduced Enlarged Straight Double crimped B32632 B32633 B32634 15 mm 22.5 mm 27.5 mm 7.5 / 10 / 12.5 mm 15 / 17.5 / 20 mm 25 mm 17.5 mm 25 mm 15 mm 22.5 mm 27.5 mm 15 mm 22.5 mm 27.5 mm 5 B32632 High pulse (wound) Ordering codes and packing units (lead spacing 15 mm) VR Vrms CR f 1 kHz VDC VAC nF 2.2 630 300 3.3 4.7 6.8 10 15 22 33 47 1.0 1250 450 1.5 2.2 3.3 4.7 6.8 10 15 1.0 1600 450 1.5 2.2 3.3 4.7 6.8 10 Max. dimensions wxhxl mm 6.0 x 11.5 x 19.0 6.0 x 11.5 x 19.0 6.0 x 11.5 x 19.0 6.0 x 11.5 x 19.0 6.0 x 11.5 x 19.0 7.0 x 12.0 x 19.0 8.0 x 13.5 x 19.0 9.5 x 15.5 x 19.0 12.0 x 17.0 x 19.0 6.5 x 11.5 x 19.0 6.5 x 11.5 x 19.0 6.5 x 12.0 x 19.0 7.0 x 12.5 x 19.0 7.0 x 12.5 x 19.0 7.5 x 14.0 x 19.0 9.0 x 15.5 x 19.0 12.0 x 16.5 x 19.0 6.0 x 11.5 x 19.0 6.0 x 11.5 x 19.0 7.0 x 12.0 x 19.0 8.0 x 13.5 x 19.0 9.5 x 15.5 x 19.0 10.5 x 16.0 x 19.0 12.5 x 17.5 x 19.0 Ordering code (composition see below) B32632A6222+*** B32632A6332+*** B32632A6472+*** B32632A6682+*** B32632A6103+*** B32632A6153+*** B32632A6223+*** B32632A6333+*** B32632A6473+*** B32632A7102+*** B32632A7152+*** B32632A7222+*** B32632A7332+*** B32632A7472+*** B32632A7682+*** B32632A7103+*** B32632A7153+*** B32632A1102+*** B32632A1152+*** B32632A1222+*** B32632A1332+*** B32632A1472+*** B32632A1682+*** B32632A1103+*** Ammo Reel Untaped pack pcs./unit pcs./unit pcs./unit 900 900 900 900 900 800 700 600 450 850 850 850 800 800 750 600 450 900 900 800 700 600 500 450 1200 1200 1200 1200 1200 1000 900 800 600 1100 1100 1100 1000 1000 1000 800 600 1200 1200 1000 900 800 700 600 1000 1000 1000 1000 1000 1000 1000 500 500 1000 1000 1000 1000 1000 1000 500 500 1000 1000 1000 1000 1000 500 500 Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K= 10% J= 5% A= 3.5% on request = 2.5% *** = Packaging code: 289 = Ammo pack 189 = Reel 010 = Untaped crimped (lead length 6 1 mm) 011 = Untaped crimped (lead length min. 20 mm) 008 = Untaped (straight, lead length 173 mm) 020 = Double crimped (lead length 6 1 mm) Packaging codes for further lead configurations (untaped): Lead configuration (lead length 6 1 mm) Reduced Reduced Reduced Enlarged Lead spacing (mm) 7.5 mm 10 mm 12.5 mm 17.5 mm Packaging code 030 040 050 060 6 B32632 High pulse (wound) Ordering codes and packing units (lead spacing 15 mm) VR Vrms CR f 1 kHz VDC VAC nF 0.47 2000 500 0.47 0.68 0.68 1.0 1.5 2.2 3.3 4.7 6.8 0.47 3000 800 0.68 1.0 1.5 2.2 3.3 Max. dimensions wxhxl mm 6.5 x 11.5 x 19.0 6.5 x 11.5 x 19.0 6.5 x 12.5 x 19.0 6.5 x 12.5 x 19.0 6.5 x 12.5 x 19.0 6.5 x 12.5 x 19.0 7.0 x 13.5 x 19.0 8.5 x 15.0 x 19.0 10.5 x 16.0 x 19.0 12.5 x 17.5 x 19.0 5.5 x 11.0 x 19.0 6.0 x 12.0 x 19.0 7.5 x 13.0 x 19.0 8.5 x 14.5 x 19.0 10.5 x 16.0 x 19.0 12.5 x 18.0 x 19.0 Ordering code (composition see below) B32632A2471M*** B32632A2471K*** B32632A2681M*** B32632A2681K*** B32632A2102+*** B32632A2152+*** B32632A2222+*** B32632A2332+*** B32632A2472+*** B32632A2682+*** B32632S4471+*** B32632S4681+*** B32632S4102+*** B32632S4152+*** B32632S4222+*** B32632S4332+*** Ammo pack pcs./unit 850 850 850 850 850 850 800 650 500 450 1000 900 750 650 500 450 Reel Untaped pcs./unit 1100 1100 1100 1100 1100 1100 1000 850 700 600 1300 1200 1000 850 700 600 pcs./unit 1000 1000 1000 1000 1000 1000 500 500 500 500 1000 1000 500 500 500 500 Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K= 10% J= 5% A= 3.5% on request = 2.5% *** = Packaging code: 289 = Ammo pack 189 = Reel 010 = Untaped crimped (lead length 6 1 mm) 011 = Untaped crimped (lead length min. 20 mm) 008 = Untaped (straight, lead length 173 mm) 020 = Double crimped (lead length 6 1 mm) Packaging codes for further lead configurations (untaped): Lead configuration (lead length 6 1 mm) Reduced Reduced Reduced Enlarged Lead spacing (mm) 7.5 mm 10 mm 12.5 mm 17.5 mm Packaging code 030 040 050 060 7 B32633 High pulse (wound) Ordering codes and packing units (lead spacing 22.5 mm) VR Vrms CR f 1 kHz VDC VAC nF 630 300 1250 450 1600 450 2000 500 22 33 47 68 100 10 15 22 33 47 3.3 4.7 6.8 10 15 22 33 2.2 3.3 4.7 6.8 10 15 22 Max. dimensions wxhxl mm 6.5 x 12.5 x 27.5 7.0 x 15.0 x 27.5 8.0 x 17.0 x 27.5 9.5 x 17.5 x 27.5 11.5 x 19.5 x 27.5 7.0 x 15.0 x 27.5 8.0 x 16.0 x 27.5 10.0 x 17.5 x 27.5 12.0 x 19.5 x 27.5 14.0 x 21.0 x 27.5 7.0 x 13.0 x 27.5 7.0 x 13.0 x 27.5 7.0 x 16.0 x 27.5 8.0 x 17.0 x 27.5 9.5 x 17.5 x 27.5 11.5 x 19.5 x 27.5 15.5 x 22.5 x 27.5 7.0 x 14.0 x 27.5 7.0 x 14.0 x 27.5 7.0 x 15.5 x 27.5 9.0 x 16.5 x 27.5 10.5 x 17.5 x 27.5 13.0 x 20.5 x 27.5 15.5 x 22.5 x 27.5 Ordering code (composition see below) B32633A6223+*** B32633A6333+*** B32633A6473+*** B32633A6683+*** B32633A6104+*** B32633A7103+*** B32633A7153+*** B32633A7223+*** B32633A7333+*** B32633A7473+*** B32633A1332+*** B32633A1472+*** B32633A1682+*** B32633A1103+*** B32633A1153+*** B32633A1223+*** B32633A1333+*** B32633A2222+*** B32633A2332+*** B32633A2472+*** B32633A2682+*** B32633A2103+*** B32633A2153+*** B32633A2223+*** Ammo Reel Untaped pack pcs./unit pcs./unit pcs./unit 550 500 450 350 300 500 450 350 300 250 500 500 500 450 350 300 250 500 500 500 400 350 250 200 750 700 600 500 400 700 600 500 400 350 700 700 700 650 500 400 300 700 700 700 550 450 350 300 1000 500 500 500 250 500 500 500 250 250 1000 1000 500 500 250 250 250 1000 1000 500 500 250 250 250 Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K= 10% J= 5% A= 3.5% on request = 2.5% *** = Packaging code: 289 = Ammo pack 189 = Reel 010 = Untaped crimped (lead length 6 1 mm) 011 = Untaped crimped (lead length min. 20 mm) 008 = Untaped (straight, lead length 173 mm) 020 = Double crimped (lead length 6 1 mm) Packaging codes for further lead configurations (untaped): Lead configuration (lead length 6 1 mm) Reduced Reduced Reduced Enlarged Lead spacing (mm) 15 mm 17.5 mm 20 mm 25 mm Packaging code 055 060 070 080 8 B32633 High pulse (wound) Ordering codes and packing units (lead spacing 22.5 mm) VR Vrms CR f 1 kHz VDC VAC nF 1.0 2500 750 1.5 2.2 3.3 4.7 6.8 10 15 1.0 3000 800 1.5 2.2 3.3 4.7 6.8 Max. dimensions wxhxl mm 7.5 x 14.0 x 27.5 7.5 x 15.0 x 27.5 8.0 x 16.0 x 27.5 9.5 x 16.0 x 27.5 10.0 x 18.5 x 27.5 12.0 x 20.5 x 27.5 14.0 x 23.0 x 27.5 17.0 x 26.0 x 27.5 5.5 x 12.0 x 27.5 6.5 x 12.5 x 27.5 7.5 x 14.0 x 27.5 9.0 x 15.5 x 27.5 11.0 x 17.0 x 27.5 13.0 x 19.0 x 27.5 Ordering code (composition see below) B32633A3102+*** B32633A3152+*** B32633A3222+*** B32633A3332+*** B32633A3472+*** B32633A3682+*** B32633A3103+*** B32633A3153+*** B32633S4102+*** B32633S4152+*** B32633S4222+*** B32633S4332+*** B32633S4472+*** B32633S4682+*** Ammo pack pcs./unit 450 450 450 350 350 300 250 200 650 550 450 400 300 250 Reel Untaped pcs./unit pcs./unit 650 1000 650 1000 600 500 500 500 500 500 400 250 350 250 300 200 900 500 750 500 650 500 550 500 450 500 350 200 Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K= 10% J= 5% A= 3.5% on request = 2.5% *** = Packaging code: 289 = Ammo pack 189 = Reel 010 = Untaped crimped (lead length 6 1 mm) 011 = Untaped crimped (lead length min. 20 mm) 008 = Untaped (straight, lead length 173 mm) 020 = Double crimped (lead length 6 1 mm) Packaging codes for further lead configurations (untaped): Lead configuration (lead length 6 1 mm) Reduced Reduced Reduced Enlarged Lead spacing (mm) 15 mm 17.5 mm 20 mm 25 mm Packaging code 055 060 070 080 9 B32634 High pulse (wound) Ordering codes and packing units (lead spacing 27.5 mm) VR Vrms CR f 1 kHz VDC VAC nF 630 300 1250 450 1600 450 2000 500 100 150 220 330 33 47 68 100 15 22 33 47 68 10 15 22 33 Max. dimensions wxhxl mm 9.5 x 18.0 x 32.5 12.0 x 22.0 x 32.5 13.5 x 22.5 x 32.5 16.0 x 25.5 x 32.5 9.5 x 18.0 x 32.5 11.5 x 20.0 x 32.5 13.0 x 23.0 x 32.5 16.0 x 26.0 x 32.5 8.5 x 17.0 x 32.5 10.0 x 18.5 x 32.5 12.0 x 22.0 x 32.5 14.0 x 22.5 x 32.5 16.0 x 25.5 x 32.5 8.5 x 17.0 x 32.5 10.0 x 20.0 x 32.5 12.0 x 22.0 x 32.5 15.0 x 25.0 x 32.5 Ordering code (composition see below) B32634A6104+*** B32634A6154+*** B32634A6224+*** B32634A6334+*** B32634A7333+*** B32634A7473+*** B32634A7683+*** B32634A7104+*** B32634A1153+*** B32634A1223+*** B32634A1333+*** B32634A1473+*** B32634A1683+*** B32634A2103+*** B32634A2153+*** B32634A2223+*** B32634A2333+*** Untaped pcs./unit 250 200 200 150 250 250 200 150 500 250 250 200 150 500 250 250 200 Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K= 10% J= 5% A= 3.5% on request = 2.5% *** = Packaging code: 010 = Untaped crimped (lead length 6 1 mm) 011 = Untaped crimped (lead length min. 20 mm) 008 = Untaped (straight, lead length 173 mm) 020 = Double crimped (lead length 6 1 mm) Packaging codes for further lead configurations (untaped): Lead configuration (lead length 6 1 mm) Reduced Lead spacing (mm) 25 mm Packaging code 090 10 B32632 ... B32634 High pulse (wound) Technical data Operating temperature range Dissipation factor tan at 20 C (upper limit values) Insulation resistance Rins at 20 C, rel. humidity 65% (minimum as-delivered values) DC test voltage Category voltage VC (continuous operation with VDC or VAC at f 1 kHz) Operating voltage V op for short operating periods (VDC or VAC at f 1 kHz) Damp heat test Limit values after damp heat test Max. operating temperature Top,max Upper category temperature Tmax Lower category temperature Tmin Rated temperature TR 1.0 10-3 (at 10 kHz) 2.0 10-3 (at 100 kHz) 100 G 2.0 VR, 2 s TA (C) DC voltage derating TA 85 VC = VR 85<TA100 VC = VR (165TA)/80 TA (C) DC voltage (max. hours) TA 85 Vop = 1.25 VC (2000h) 85<TA100 Vop = 1.25 VC (1000h) 56 days/40 C/93% relative humidity Capacitance change C/C Dissipation factor change tan Insulation resistance Rins Reliability: Failure rate Service life tSL Failure criteria: Total failure Failure due to variation of parameters +110 C +100 C 55 C +85 C AC voltage derating VC,rms = Vrms VC,rms=Vrms (165TA)/80 AC voltage (max. hours) Vop = 1.0 VC,rms (2000h) Vop = 1.0 VC,rms (1000h) 2% 1.0 10-3 (at 10 kHz) 50% of minimum as-delivered values 2 fit ( 2 10-9/h) at 0.5 VR, 40 C 200 000 h at 1.0 VR, 40 C For conversion to other operating conditions and temperatures, refer to chapter "Quality assurance", page . Short circuit or open circuit Capacitance change C/C Dissipation factor tan Insulation resistance Rins 11 > 10% > 4 upper limit value < 1500 M B32632 ... B32634 High pulse (wound) Characteristic voltages VDC, VAC, Vpp VDC V 630 1250 1600 2000 2500 3000 VAC V 300 450 450 500 750 800 Vpp V 560 1000 1200 1400 1750 1800 12 B32632 ... B32634 High pulse (wound) Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/s. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V 2/s. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt values Lead spacing VR Vrms VDC VAC 630 1250 1600 2000 2500 3000 300 450 450 500 750 800 15 mm 22.5 mm 27.5 mm dV/dt in V/s 5 000 12 000 14 000 17 000 18 000 3 000 7 000 9 000 12 000 14 000 15 000 2 000 4 500 5 500 7 000 15 mm 22.5 mm 27.5 mm k0 values Lead spacing VR Vrms VDC VAC 630 1250 1600 2000 2500 3000 300 450 450 500 750 800 k0 in V2/s 6 300 000 30 000 000 45 000 000 68 000 000 108 000 000 3 800 000 17 500 000 29 000 000 48 000 000 59 000 000 90 000 000 13 2 500 000 11 000 000 17 500 000 28 000 000 B32632 ... B32634 High pulse (wound) Impedance Z versus frequency f (typical values) 14 B32632 High pulse (wound) Permissible AC voltage Vrms versus frequency f (for sinusoidal waveforms, TA 90 C) For T A >90 C, please refer to "General technical information", section 3.2.3. Lead spacing 15 mm 630 VDC/300 VAC 1250 VDC/450 VAC 1600 VDC/450 VAC 2000 VDC/500 VAC 15 B32632 High pulse (wound) Permissible AC voltage Vrms versus frequency f (for sinusoidal waveforms, TA 90 C) For T A >90 C, please refer to "General technical information", section 3.2.3. Lead spacing 15 mm 3000 VDC/800 VAC 16 B32633 High pulse (wound) Permissible AC voltage Vrms versus frequency f (for sinusoidal waveforms, TA 90 C) For T A >90 C, please refer to "General technical information", section 3.2.3. Lead spacing 22.5 mm 630 VDC/300 VAC 1250 VDC/450 VAC 1600 VDC/450 VAC 2000 VDC/500 VAC 17 B32633 High pulse (wound) Permissible AC voltage Vrms versus frequency f (for sinusoidal waveforms, TA 90 C) For T A >90 C, please refer to "General technical information", section 3.2.3. Lead spacing 22.5 mm 2500 VDC/750 VAC 3000 VDC/800 VAC 18 B32634 High pulse (wound) Permissible AC voltage Vrms versus frequency f (for sinusoidal waveforms, TA 90 C) For T A >90 C, please refer to "General technical information", section 3.2.3. Lead spacing 27.5 mm 630 VDC/300 VAC 1250 VDC/450 VAC 1600 VDC/450 VAC 2000 VDC/500 VAC 19 B32632 ... B32634 High pulse (wound) Flyback application Permissible voltage and current / waveform Permissible current I pp versus frequency for a duty cycle of 20% (t 0/t = 0.2): Approximation formular for duty cycle higher than 20%: 20 B32632 ... B32634 High pulse (wound) Flyback application Permissible current Ipp versus rated capacitance CR Frequency = 15.75 kHz Frequency = 31.5 kHz Frequency = 95 kHz 21