1N4001 thru 1N4007 Vishay General Semiconductor General Purpose Plastic Rectifier FEATURES * Low forward voltage drop * Low leakage current * High forward surge capability * Solder dip 260 C, 40 s DO-204AL (DO-41) * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in general purpose rectification of power supplies, inverters, converters and freewheeling diodes application. (Note: These devices are not Q101 qualified.) PRIMARY CHARACTERISTICS IF(AV) 1.0 A VRRM 50 V to 1000 V IFSM (8.3 ms sine-wave) 30 A IFSM (square wave tp = 1 ms) 45 A VF 1.1 V IR 5.0 A TJ max. 150 C MECHANICAL DATA Case: DO-204AL, molded epoxy body Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current 0.375" (9.5 mm) lead length at TA = 75 C IF(AV) 1.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 30 A Non-repetitive peak forward surge current square waveform TA = 25 C (Fig. 3) tp = 1 ms tp = 2 ms tp = 5 ms IFSM 45 35 30 A Maximum full load reverse current, full cycle average 0.375" (9.5 mm) lead length TL = 75 C IR(AV) 30 A I2 t 3.7 A2 s TJ, TSTG - 50 to + 150 C Rating for fusing (t < 8.3 ms) (1) Operating junction and storage temperature Note: (1) For device using on bridge rectifier application Document Number: 88503 Revision: 26-Mar-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 1N4001 thru 1N4007 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage 1.0 A Maximum DC reverse current at rated DC blocking voltage SYMBOL 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNIT TA = 25 C TA = 125 C Typical junction capacitance 4.0 V, 1 MHz VF 1.1 V IR 5.0 50 A CJ 15 pF THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNIT RJA RJL Typical thermal resistance (1) 50 25 C/W Note: (1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, P.C.B. mounted ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 1N4004-E3/54 0.33 54 5500 13" diameter paper tape and reel 1N4004-E3/73 0.33 73 3000 Ammo pack packaging RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 30 60 Hz Resistive or Inductive Load Peak Forward Surge Current (A) Average Forward Rectified Current (A) 1.0 0.8 0.2 x 0.2" (5.0 x 5.0 mm) Copper Pads 0.6 0.4 0.2 0.375" (9.5 mm) Lead Length 0 TA = 75 C 8.3 ms Single Half Sine-Wave 25 20 15 10 5 0 25 50 75 100 125 150 175 1 10 100 Junction Temperature (C) Number of Cycles at 60 Hz Figure 1. Forward Current Derating Curve Figure 2. Maximum Non-repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88503 Revision: 26-Mar-08 1N4001 thru 1N4007 Vishay General Semiconductor 100 40 tp = 2 ms 35 30 tp = 5 ms 25 tp 20 15 10 square waveform 10 25 50 75 1 0.1 125 100 1 10 100 Ambient Temperature (C) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 6. Typical Junction Capacitance 100 100 Transient Thermal Impedance (C/W) Instantaneous Forward Current (A) TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p tp = 1 ms 45 Junction Capacitance (pF) Peak Forward Surge Current (A) 50 TJ = 25 C Pulse Width = 300 s 1 % Duty Cycle 10 1 0.1 0.01 0.6 0.8 1.0 1.2 1.4 1.6 1.8 10 1 0.1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Figure 4. Typical Instantaneous Forward Characteristics Figure 7. Typical Transient Thermal Impedance Instantaneous Reverse Current (A) 1000 TJ = 150 C 100 10 TJ = 100 C 1 TJ = 25 C 0.1 0.01 0 20 40 60 80 100 Percentage of Peak Reverse Voltage (%) Figure 5. Typical Reverse Characteristics Document Number: 88503 Revision: 26-Mar-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 1N4001 thru 1N4007 Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-204AL (DO-41) 1.0 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) DIA. 0.205 (5.2) 0.160 (4.1) 1.0 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) DIA. Note: Lead diameter is www.vishay.com 4 0.026 (0.66) for suffix "E" part numbers 0.023 (0.58) For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88503 Revision: 26-Mar-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1