Philips Components Product specification Metallized PPS film capacitors MKPS 390/391/392/393/394 MKPS CHIP CAPACITORS SIZES 1206/1210/1812/2220/2824 handbook, 4 columns DR930430 Fig.1 Simplified outline. FEATURES * Self-encased chip capacitor for surface mounting QUICK REFERENCE DATA DESCRIPTION VALUE Capacitance range (E12 series); note 1 0.22 to 470 nF Capacitance tolerance 10%; 5% Rated voltage (DC) 25 V; 160 V Rated voltage (AC) 16 V; 100 V * Case sizes: 1206, 1210, 1812, 2220, 2824 Climatic category 55/125/56 Rated temperature 100 C * Taped versions for automatic placement. Maximum application temperature 125 C Tangent of loss angle at 100 kHz 25 x 10-4 Reference specification IEC: 40/782/FDIS and EN 132500 Performance grade grade 1 * Stacked metallized non-flammable film cell * Solder-coated terminations * Solvent resistant without damage APPLICATIONS * Blocking and coupling Note * Tuning in data processing and telecommunication equipment. 1. E24 series available on request. 1996 Oct 21 245 Philips Components Product specification Metallized PPS film capacitors MKPS 390/391/392/393/394 MKPS GENERAL DATA l handbook, full pagewidth b h DR08102 l1 h1 Fig.2 Outline. Specific reference data for the 25 V and 160 V DC capacitors VALUE DESCRIPTION at 1 kHz Tangent of loss angle Rated voltage pulse slope (dU/dt)R for case sizes: 1206 1210 1812 2220 2824 40 x 10-4 at 10 kHz at 100 kHz 10-4 100 x 10-4 50 x UR = 25 V: 200 V/s UR = 25 V: 200 V/s UR = 25 V: 60 V/s UR = 25 V: 30 V/s UR = 25 V: 15 V/s R between leads, for C 0.33 F RC between leads, for C > 0.33 F UR = 160 V: 1500 V/s UR = 160 V: 1500 V/s UR = 160 V: 300 V/s UR = 160 V: 180 V/s UR = 160 V: 70 V/s >3750 M >1250 s Mechanical data and packaging quantities for the 25 V and 160 V DC versions BLISTER TAPE ON REEL(1) CASE SIZE SPQ l (mm) b (mm) hmax (mm) l1 (mm) h1 (mm) 25 V 160 V 1206 3000 3000 3.2 0.2 1.6 0.2 0.7 0.3 0.10 0.05 1210 1812 2500 3500 3000 (C 100 nF) 2500 3500 3000 (C 10 nF) 3.2 0.2 4.5 0.2 5.7 0.4 2.5 0.2 3.2 0.2 5.0 0.3 0.7 0.3 0.7 0.3 0.7 0.3 0.10 0.05 0.10 0.05 0.10 0.05 2000 (C 150 nF) 3000 (C = 220 nF) 1500 (C 330 nF) 2000 (C 15 nF) 3000 (C = 22 nF) 1500 (C 33 nF) 5.7 0.4 7.2 0.4 7.2 0.4 5.0 0.3 6.1 0.3 6.1 0.3 - 1.0 0.3 - - 0.10 0.05 - 2220 2824 Notes 1. For dimensions, see Chapter "Packaging". 2. See Tables 1 and 2. 1996 Oct 21 246 note 2 Philips Components Product specification Metallized PPS film capacitors Table 1 MKPS 390/391/392/393/394 URdc = 25 V; URac = 16 V blister tape on reel CATALOGUE NUMBER 2222 ... ..... AND PACKAGING digits 8 to 12 of catalogue number(3) C(1)(2) (F) 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 Table 2 C-tol = 10% C-tol = 5% 28102 28152 28222 28332 28472 28682 28103 28153 28223 28333 28473 28683 28104 28154 28224 28334 28474 29102 29152 29222 29332 29472 29682 29103 29153 29223 29333 29473 29683 29104 29154 29224 29334 29474 digits 5 to 7 of catalogue number 390 391 392 393 394 2220 - - - - - - - - - - 2.1 2.1 2.4 3.2 4.0 - - 2824 - - - - - - - - - - - - - - 3.0 4.0 4.8 hmax at case size 1206 1.4 1.4 1.4 1.4 1.4 1.4 - - - - - - - - - - - 1210 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.9 - - - - - - - - - 1812 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.1 2.5 - - - - - - URdc = 160 V; URac = 100 V blister tape on reel CATALOGUE NUMBER 2222 ... ..... AND PACKAGING C(1)(2) (F) 0.00022 0.00033 0.00047 0.00068 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.033 0.047 digits 8 to 12 of catalogue number(3) C-tol = 10% C-tol = 5% 48221 48331 48471 48681 48102 48152 48222 48332 48472 48682 48103 48153 48223 48333 48473 49221 49331 49471 49681 49102 49152 49222 49332 49472 49682 49103 49153 49223 49333 49473 digits 5 to 7 of catalogue number 390 391 392 393 394 2220 - - - - - - - - 2.1 2.2 2.6 3.3 4.0 - - 2824 - - - - - - - - - - - - 3.0 4.0 4.8 hmax at case size 1206 1.4 1.4 1.4 - - - - - - - - - - - - 1210 - - 1.7 1.7 1.8 2.0 - - - - - - - - - 1812 - - - - - 2.0 2.0 2.2 2.5 - - - - - - Notes 1. The standard range of PPS capacitors is shown. Other combinations of capacitance, size and voltage rating are available on request. 2. E24 series available on request. 3. The shading indicates preferred types. 1996 Oct 21 247 Philips Components Product specification Metallized PPS film capacitors MKPS 390/391/392/393/394 CONSTRUCTION Description * Stacked cell of metallized polyphenylene sulphide (PPS) film olumns metallized polyphenylene sulphide film * The terminations are solder-coated. The capacitor can withstand solvents without damage. metal spray layer solder coated terminations DR930500 Fig.3 Construction. 1996 Oct 21 248 Philips Components Product specification Metallized PPS film capacitors MKPS 390/391/392/393/394 Mounting The capacitors can be mounted on printed-circuit boards or ceramic substrates by applying wave or reflow soldering. Do not allow abrupt cooling after heating. handbook, full pagewidth 300 I.R. REFLOW SOLDERING P.C.B. temp. DR930620 T C max. 230 C 200 PREHEATING max. 150 C COOLING 100 maximum 3 minutes 0 max. 10 sec. minimum 2 minutes time REFLOW SOLDERING Fig.4 PCB temperature as a function of time for reflow soldering; typical curve. handbook, full pagewidth 300 Solder temp. WAVE SOLDERING DR930630 max. 260 C T C 200 COOLING PREHEATING max. 150 C 100 0 maximum 3 minutes max 5 sec. minimum 2 minutes time WAVE SOLDERING Fig.5 PCB temperature as a function of time for wave soldering; typical curve. 1996 Oct 21 249 Philips Components Product specification Metallized PPS film capacitors handbook, full pagewidth 300 P.C.B. temp. MKPS 390/391/392/393/394 VAPOR PHASE REFLOW SOLDERING DR931460 T C max. 215 C 200 COOLING PREHEATING max. 150 C 100 maximum 3 minutes 0 max. 30 sec. minimum 2 minutes time VAPOUR PHASE REFLOW SOLDERING Fig.6 PCB temperature as a function of time for vapour phase reflow soldering; typical curve. yy y yy y y y For advised soldering profiles and footprint design, refer to Fig.7 and Tables 3 and 4. D E C B A F G preferred direction during wave soldering solder land / solder paste pattern Fig.7 Soldering profiles and footprint design. 1996 Oct 21 250 solder resist pattern occupied area tracks CCA045 Philips Components Product specification Metallized PPS film capacitors Table 3 MKPS 390/391/392/393/394 Reflow soldering data FOOTPRINT DIMENSIONS (mm) CASE SIZE A B C D E F G 1206 4.00 1.60 1.20 1.80 0.95 4.50 2.50 PROCESSING REMARKS PLACEMENT ACCURACY (mm) - 0.25 1210 4.00 1.60 1.20 2.70 0.95 4.50 3.40 - 0.25 1812 5.40 3.00 1.20 3.50 2.20 5.80 4.10 - 0.25 2220 6.60 4.20 1.20 5.30 3.40 7.00 5.90 - 0.25 2824 8.00 5.20 1.40 6.50 4.30 8.50 7.00 - 0.25 PROPOSED NUMBER AND DIMENSIONS OF DUMMY TRACKS (mm) PLACEMENT ACCURACY (mm) Table 4 Wave soldering data FOOTPRINT DIMENSIONS (mm) CASE SIZE A B C D E F G 1206 4.80 1.60 1.60 1.70 0.77 5.50 3.20 2 x (0.25 x 1.70) 0.25 1210 5.40 1.60 1.90 2.60 0.77 6.60 4.70 2 x (0.25 x 2.60) 0.25 1812 7.20 3.00 2.10 3.40 2.00 8.60 5.90 - 0.25 2220 9.60 4.20 2.70 5.20 3.20 11.60 8.50 - 0.25 2824 11.80 5.20 3.30 6.30 4.20 14.30 10.00 - 0.25 RATINGS AND CHARACTERISTICS Unless otherwise specified, all electrical values apply to an ambient free air temperature of 23 1 C an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 2%. For reference testing, a conditioning period shall be applied over 96 4 hours by heating the products in a circulating-air oven at the rated temperature and a relative humidity not exceeding 20%. 1996 Oct 21 251 Philips Components Product specification Metallized PPS film capacitors MKPS 390/391/392/393/394 Capacitance All capacitance values are specified at 1 kHz. DR930440 handbook, full pagewidth 2 C/C (%) 1 0 -1 -2 -3 10 2 10 3 10 4 10 5 f (Hz) Fig.8 Capacitance change as a function of frequency; typical curve. DR930450 handbook, full pagewidth 2 C/C (%) 1 0 -1 -2 -50 50 0 100 Tamb (C) Fig.9 Capacitance change as a function of ambient temperature; typical curve. 1996 Oct 21 252 Philips Components Product specification Metallized PPS film capacitors MKPS 390/391/392/393/394 Impedance DR931420 handbook, full pagewidth 3 10 MKPS CHIP 25 V Impedance () 10 2 10 1 10 0 1.0 nF 10-1 4.7 nF 47 nF 10-2 10 4 470 nF 10 5 10 6 10 7 f (Hz) 10 8 Fig.10 Impedance as a function of frequency; typical curves for 25 V version. DR931430 handbook, full pagewidth 3 10 MKPS CHIP 160 V Impedance () 10 2 10 1 10 0 10-1 4.7 nF 22 nF 10-2 10 4 10 5 10 6 10 7 f (Hz) Fig.11 Impedance as a function of frequency; typical curves for 160 V version. 1996 Oct 21 253 10 8 Philips Components Product specification Metallized PPS film capacitors MKPS 390/391/392/393/394 Temperature * Storage temperature: Tstg = -25 to +40 C with RH maximum 80% without condensation. Voltage * Category voltage: Uc = 0.8 x URdc * Test voltage between leads: 1.6 x URdc. Maximum RMS voltage (sinewave) as a function of frequency for Tamb 85 C (see Figs 12 and 13) DR930470 handbook, full pagewidth 2 10 AC voltage (V) 10 1 10 0 10 3 15 4. 47 22 47 0 0 nF 7 n nF nF nF F ( (s (s siz (siz (siz ize ize e e e 1 28 22 81 121 120 0) 24 20 2) 6) ) ) 10 4 10 5 10 6 The sum of the DC voltage and the peak value of the superimposed AC voltage must be URdc. The maximum dissipation must not be exceeded for waveforms other than sinusoidal. Fig.12 Maximum AC voltage as a function of frequency; URdc = 25 V. 1996 Oct 21 254 f (Hz) 10 7 Philips Components Product specification Metallized PPS film capacitors MKPS 390/391/392/393/394 DR930480 handbook, full pagewidth 3 10 AC voltage (V) 10 2 10 1 47 10 0 10 3 10 4 10 5 nF 22 4.7 0.4 1.5 n 7n n (si F (si F (s nF ( F( ze ze ize s siz 28 22 18 e 1 ize 1 24 20 12 20 21 ) ) ) 6) 0) 10 6 The sum of the DC voltage and the peak value of the superimposed AC voltage must be URdc. The maximum dissipation must not be exceeded for waveforms other than sinusoidal. Fig.13 Maximum AC voltage as a function of frequency: URdc = 160 V. 1996 Oct 21 255 f (Hz) 10 7 Philips Components Product specification Metallized PPS film capacitors MKPS 390/391/392/393/394 Tangent of loss angle TANGENT OF LOSS ANGLE at 1 kHz at 10 kHz at 100 kHz 40 x 10-4 50 x 10-4 100 x 10-4 DR08107 handbook, full pagewidth 2 10 dissipation factor (x 10-4 ) 10 1 10 0 10 2 10 3 10 4 f (Hz) 10 5 Fig.14 Tangent of loss angle as a function of frequency; typical curve. DR08108 handbook, full pagewidth 60 dissipation factor (x 10-4) 50 40 30 20 10 0 -50 -25 0 25 50 75 100 Fig.15 Tangent of loss angle as a function of ambient temperature; typical curve. 1996 Oct 21 256 Tamb (C) 125 Philips Components Product specification Metallized PPS film capacitors MKPS 390/391/392/393/394 Rated voltage pulse slope RATED VOLTAGE (V) MAXIMUM RATED PULSE LOAD (V/s)(1)(2) CASE SIZE 1206 CASE SIZE 1210 CASE SIZE 1812 CASE SIZE 2220 CASE SIZE 2824 25 200 200 60 30 15 160 1500 1500 300 180 70 Notes 1. The maximum pulse load values are valid for voltages equal to the rated voltage. For lower voltages, the given values may be multiplied by UR and divided by the applied voltage. 2. If the pulse load requirement is satisfied, a check must be made to ensure that the maximum dissipation is not exceeded. Insulation resistance The insulation resistance is measured after a voltage of 10 1 V has been applied for 1 minute 5 seconds: * R between leads, for C 0.33 F: >3750 M * RC time between leads, for C > 0.33 F: >1250 s. DR930490 handbook, full pagewidth 5 10 RC (s) 10 4 10 3 10 2 -60 0 60 120 Fig.16 RC product as a function of ambient free air temperature; typical curve. 1996 Oct 21 257 Tamb (C) Philips Components Product specification Metallized PPS film capacitors MKPS 390/391/392/393/394 Maximum dissipation Curve reference and dimensions olumns CURVE (see Fig.17) CASE SIZE 1 1206 2 1210 3 1812 4 2220 5 2824 DR961050 100 Pmax (mW) 5 80 4 60 3 40 2 1 20 0 0 25 50 75 100 125 Tamb(C) Fig.17 Maximum permissible power dissipation as a function of ambient temperature, at various capacitor dimensions. Application note To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc). 2. The peak-to-peak voltage (Up-p) shall not be greater than 2 x 2 times the rated AC voltage (URac) to avoid the ionisation inception level. 3. The peak current (Ip) shall not exceed the maximum peak current, defined as maximum voltage pulse slope (dU/dt) multiplied by the capacitance: dU I p max = C -------- max dt Or the voltage pulse slope shall not exceed the rated voltage pulse slope. If the pulse voltage is lower than the rated voltage, the values (see section "Rated voltage pulse slope" for more details) may be multiplied by URdc and divided by the applied voltage. 4. The dissipated power shall not be greater than the maximum permissible power dissipation stated in Fig.17. 5. The free air ambient temperature for the capacitor is not exceeding the category temperature. 6. Since all metallized polyphenylene sulphide capacitors have an intrinsically active flammability risk after a capacitor breakdown (short circuit), it is recommended that the power to the component is limited to 10 times the maximum allowed power dissipation (Pmax) during the short circuit failure mode of the capacitor. 1996 Oct 21 258 Philips Components Product specification Metallized PPS film capacitors MKPS 390/391/392/393/394 MARKING Product marking 1. Rated capacitance 2. Rated voltage 3. Year and month of manufacture 4. Manufacturer's name. Capacitance data, voltage and tolerance codes Letter codes for the E-series of capacitance values, cardinal numbers for multipliers, letter codes for voltage and tolerance CAPACITANCE SIGNIFICANT DIGITS (pF) CODE FOR CAPACITANCE 1.0 1.1 1.2 MULTIPLIER FOR CAPACITANCE CARDINAL NUMBER AS CODE A 1 0 25 G B 10 1 160 none C 102 2 - - 1.3 D 103 3 - - 1.5 E 104 4 - - F 105 5 - - 1.8 G 106 6 - - 2.0 H 107 7 - - 2.2 J 108 8 - - 2.4 K - - - - 2.7 L - - - - 3.0 M - - - - 3.3 N - - - - 3.6 P - - - - 3.9 Q - - - - 4.3 R - - - - 4.7 S - - - - 5.1 T - - - - 5.6 U - - - - 6.2 V - - - - 6.8 W - - - - 7.5 X - - - - 8.2 Y - - - - 9.1 Z - - - - 1.6 1996 Oct 21 259 VOLTAGE (V) CODE Philips Components Product specification Metallized PPS film capacitors MKPS 390/391/392/393/394 Letter codes for year and numbers for month of production (see note 1) YEAR LETTER CODE MONTH CODE 1990 A January 1 1991 B February 2 1992 C March 3 1993 D April 4 1994 E May 5 1995 F June 6 1996 H July 7 1997 J August 8 1998 K September 9 1999 L October O 2000 M November N 2001 N December D Note 1. Case sizes 1206 and 1210 are not marked. handbook, halfpage C value DC voltage PH A4 G E4 year & month PHILIPS DR931410 Example: 0.01 F; 25 V; April 1994. Fig.18 Marking example. 1996 Oct 21 260 Philips Components Product specification Metallized PPS film capacitors MKPS 390/391/392/393/394 Package marking The package containing the capacitors is marked as shown in Fig.19. Barcode label marking handbook, full pagewidth 1. 2. LINE MARKING EXPLANATION 3. 1 Manufacturer's name 4. 2 Country of origin 5. 3 Sub-family 4 Type description 5 Capacitance value, tolerance, voltage and climatic category ("IEC 68-1") 6 - 7 Preference origin code: A Country of origin in code: 170 (Belgium) Responsible production centre: HQ Work order: WO 8 Product type description 9 Quantity and production period, year and month code 10 Product code (12NC) 6. 7. 8. 9. 10. CCA340 Fig.19 Barcode label. 1996 Oct 21 261 Philips Components Product specification Metallized PPS film capacitors MKPS 390/391/392/393/394 QUICK REFERENCE TEST REQUIREMENTS (see note 1) PROCEDURE (quick reference) TEST REQUIREMENTS Robustness of component Resistance to soldering heat "IEC 68-2-20" 260 C; 5 s or 235 C; 60 s Component solvent resistance isopropyl alcohol; 23.5 C; 5 minutes no visible damage legible marking smooth and bright solder-coating, scattered imperfections permitted (10% of terminations surface) C/C 3% +20 pF (C 1 nF) C/C 3% (C > 1 nF) tan 20 x 10-4 Climatic sequence Dry heat: "IEC 68-2-2" 16 hours; 125 C C/C 3% +20 pF (C 1 nF) C/C 3% (C > 1 nF) tan 25 x 10-4 Damp heat cyclic, first cycle: "IEC 68-2-30" Cold: "IEC 68-2-1" Rins 50% of specified value 2 hours; -55 C Damp heat, remaining cycles: "IEC 68-2-30" Other applicable tests Damp heat steady state: "IEC 68-2-3" 56 days; 40 C; 90 to 95% RH C/C 5% +20 pF (C 1 nF) C/C 5% (C > 1 nF) tan 20 x 10-4 Rins 50% of specified value Endurance (DC): "IEC: 40 (secr)699" and "EN 132500 (DRAFT)" 2000 hours; 1.25 x URdc; 100 C 1.25 x UCdc; 125 C C/C 5% +20 pF (C 1 nF) C/C 5% (C > 1 nF) tan 25 x 10-4 Rins 50% of specified value Heat storage: "IEC: 40 (secr)699" and "EN 132500 (DRAFT)" 2000 hours; 125 C Passive flammability: "IEC 695-2-2" class C tan 25 x 10-4 no burning Note 1. For detailed information: see "Type specification" 1996 Oct 21 C/C 3% +20 pF (C 1 nF) C/C 3% (C > 1 nF) 262