3 Grindline Express Coated Abrasive, Surface Conditioning and Superabrasive Products 2 3 1 4 9 5 6 8 7 Index Introduction ........................................................................2 Safety ......................................................................................3 Scotch-Brite Hand Pads and Rolls ........................6 Bench Area Products ..............................................56-68 Accessories ..........................................................................8 Accessories-Bench Area....................................................60 Coated Abrasive Sheets and Rolls.......................9-11 Discs.................................................................................12-33 Cartridge Rolls (Accessories) ...........................................61 Fibre Discs (Accessories)..................................................12 Square Pads........................................................................67 Flap Discs ..........................................................................13 Cross Pads .........................................................................67 Roloc Discs (Accessories) ..............................................16 Miscellaneous .............................................................69-70 Bristle Discs.......................................................................22 Stikit Refill Rolls ...........................................................69 Stikit Abrasive Discs.......................................................25 Sanding Sponges ...............................................................70 PSA Discs (Accessories)...................................................26 3M Flexible Diamond Products ......................71-73 Surface Conditioning Discs (Accessories).......................28 Accessories ........................................................................73 Stars ...................................................................................58 TM COMBI Wheels ................................................................59 Evenrun Bands (Accessories).........................................64 TM TM TM TM TM Coating Removal Discs (CRD) ........................................29 Clean and Strip Discs........................................................30 High Strength Discs ..........................................................31 Belts .................................................................................34-41 Bench Top Belts ................................................................34 Deburring Belts ................................................................36 Portable Belts ....................................................................38 Scotch-Brite Surface Conditioning Belts ......................39 TM Wheels ...........................................................................42-55 Scotch-Brite EXL Deburring Wheels ...........................43 TM Scotch-Brite EXL Unitized Deburring Wheels ............44 TM Clean and Strip Cup Wheels.............................................45 Multi-Finishing Wheels.....................................................46 Cut and Polish Wheels ......................................................46 Accessories - Scotch-Brite Wheels.................................47 TM PG Wheels (Accessories) ...............................................50 TM Green Corps Cutoff Wheels ..........................................55 TM 1 Introduction The five categories include paper, cloth, fibre, paper and cloth combination and polyester film. 4 Bonds The Grindline Express catalog contains a wide variety of Scotch-Brite surface conditioning products as well as a large assortment of coated abrasive products designed to meet the needs of both production applications and day to day MRO situations. Choose from hand pads, rolls, discs, wheels, belts and various bench area products. And, of course, we offer a complete line of accessories to optimize product performance. 3M abrasive products are used on most materials including ferrous and non-ferrous metals, specialized alloys, wood, plastics, composites, ceramics, glass, leather and rubber. Types of operations include grinding, deburring, cleaning, finishing, polishing and blending. 3M Coated Abrasives have two layers of adhesives: a "make" coat to anchor the mineral, and a "size" coat to lock the mineral to the backing. 3M offers four types of bonds; glue, resin over glue, resin over resin and waterproof. Remember the formula: 7 Minerals...5 Backings...4 Bonds. It multiplies into an almost infinite combination of practical, durable tools. Your 3M representative will help you find the right combination to do the best job for you. Coated Abrasives should be selected carefully, matching the coated abrasive qualities to the materials and tools used and the desired results. The answers to the questions below will help determine the best coated abrasive to use for a specific application: How to use this catalog This catalog is designed to be as "user friendly" as possible. We have divided the catalog into sections: Hand Pads, Sheets, Discs, Rolls, etc. You will see that each section begins with a page that includes application photos and suggested uses. Each section includes several tables containing the various products. Simply find the size and grade for you, make a note of the UPC number and order the product from your 3M Abrasive Systems Division Distributor. Kind of substrate material--What is the composition of the surface to be finished? What type of mineral is required to cut the substrate? Does it have to be sanded wet or dry? Will it tend to load the abrasive? The basic material is an important factor in selecting the proper coated abrasive product. Shape and condition--Is the surface flat or contoured? Will the surface require a great deal of stock removal to level a surface or to remove coats of paint or varnish, or does the surface just have to be finished in preparation for coating? Splices (where applicable) are shown at the bottom of the page. Equipment--The equipment at hand will influence the form of coated abrasive. Some equipment requires pre-fabricated belts while others require cut sheets or discs. Kut Stock items are identified with red UPC numbers. Thanks for choosing 3M coated abrasive, surface conditioning and superabrasive products. Finish--What type of final finish is needed? A rough finish or a smooth finish? The finish determines the grade or grade sequence to use. Coated Abrasives 3M manufactures coated abrasives in many shapes and sizes such as the standard sheets, rolls, discs, and belts. Also available are many specialized abrasive constructions such as PG wheels, evenrun bands, cartridge rolls, fiber discs, adhesive backed abrasives, and others. 7-5-4 Backed by over 90 years of industrial experience, 3M Research has been a proven leader in developing new coated abrasive products and systems for modern production operations. Coated abrasive grades--Grade sizes are the size of the mineral grain. There are 22 common grades. They range from the coarsest, grade 12, to an extremely fine powder like mineral form, grade 600. For many newer applications, minerals are also produced in more accurate gradations which are designated by the average particle diameter in microns. There are 12 micron grades. An open coat abrasive has mineral grains that cover about 40% to 70% of the backing. An open coat abrasive is used where the material surface being abraded tends to clog or load the coated abrasive surface. A closed coat abrasive has mineral grains covering 100% of the abrasive backing. This construction is used where loading is less of a prob- In designing the versatile line of products, 3M draws from a proven formula that's your assurance of dependable performance. The formula is: 7 Minerals...5 Backings...4 Bonds. 7 Minerals Minerals perform the basic job of cutting, 3M offers seven kinds of natural and synthetic minerals to provide a rapid cut and long working life. Natural Minerals: emery, garnet. Synthetic Minerals: ceramic aluminum oxide, aluminum oxide, alumina zirconia, silicon carbide, industrial diamonds. Size adhesive Mineral 5 Backings They're the platforms that carry and support the mineral grains. Make adhesive 2 Backing Surface Conditioning Products * Conformable action of the web allows the wheels to follow contours and edges, and to maintain uniform contact with the surface. * Synthetic fibers eliminate the danger of loose flying wires commonly associated with wire brushes. Mineral, Resin and Fiber: Building Blocks for Scotch-BriteTM Surface Conditioning Products Abrasive Particles Abrasive Synthetic fibers and abrasive particles are combined and bonded to form a conformable, three-dimensional, open web material. The exceptional performance characteristics of this open web technology have been demonstrated time after time in countless factories and shops. Fiber Resin * Controlled abrasive action helps prevent undercutting or gouging so there is less chance of disturbing critical tolerances. Work Surface * Fresh abrasive is continually exposed to the work surface to deliver consistent, uniform results and to provide long product life. 3-Dimensional Open Web Spring Action * Uniform, close-tolerance construction results in smooth running wheels, reducing operator fatigue. * The open web allows air to circulate for cool operation so there's less risk of warping or discoloring the part. * The open web resists loading to provide consistent surface preparation and finishing action and long product life. Surface finishes generated by Surface Conditioning Finishes Generated (Micro-Inch Range) Mineral Type Grade Aluminum Stainless Steel Coated Abrasive Grade Equivalent A A A S Coarse Medium Very Fine Super Fine 130 -150 80 -100 16 -35 8 -12 62-72 32-40 6 -12 4-6 80-150 150-180 220-320 320-600 Safety Read and follow instructions for use. Always use appropriate protective glasses, face shields and body protection. Do not exceed maximum operating RPM. Use guards provided with machine. Follow safety operation procedures posted in work areas. 3 Surface Conditioning Products Guide to Product Selection by Application and Tool Tool Polishing Deburring Cleaning Finishing Off Hand 7447, 6448 Hand Pads 7440, 6444 Hand Pads 7448, 7445 Hand Pads 7446, 7447 Hand Pads Drill Motor Clean and Strip Discs Unitized Wheels High Strength Discs A MED High Strength Discs A VFN Clean and Strip Discs EXL Wheels Straight Grinder High Strength Discs A VFN Surface Conditioning Belts (with Expander Wheel) High Strength Discs A MED Die Grinder Unitized Wheels Unitized Wheels Unitized Wheels Right Angle Grinder Surface Conditioning Discs Surface Conditioning Discs Surface Conditioning Discs Mini-Angle Grinder Clean and Strip Cup Wheels Right Angle Die Grinder Roloc Surface Conditioning Discs TM High Strength Discs A MED Surface Conditioning Discs Clean and Strip Cup Wheels Roloc Surface Conditioning Discs TM Roloc Surface Conditioning Discs TM Roloc Surface Conditioning Discs TM Roloc Unitized Wheels Roloc Unitized Wheels Roloc Unitized Wheels TM Belt Sander Surface Conditioning Belts Bench Motor TM Surface Conditioning Belts TM Surface Conditioning Belts Surface Conditioning Belts EXL Wheels Performance Advantages Over Competitive Products Scotch-Brite Products TM Competitive Product Steel Wool Sandpaper: Sheets, Rolls, Belts and Flap Wheels Wire Brushes Polishing Finishing Leaves No Metal Fines Leaves No Metal Fines Leaves No Metal Fines No Carbon Contamination on Surface No Carbon Contamination on Surface No Oil Contamination Work Piece Protected Work Piece Protected Work Piece Protected Consistent Finish Consistent Finish No Secondary Burrs No Secondary Burrs Resists Loading Resists Loading Uniform Radius Removes all Surface Contaminants Complete Burr Removal Doesn't Fling Wires Buff and Compound Tampico and Bristle Deburring Cleaning Doesn't Fling Wires Uniform Radius Cleaner/Faster Faster Work Piece Protected Cleaner/Faster Cleaner/Faster No Undercutting Cleaner/Faster Cleaner/Faster Cleaner Less Set-Up Time Less Set-Up Time Better Radiused Edge Thorough Cleaning Files, Burrs and Scrapers Won't Damage Piece Won't Damage Piece Faster Faster Set-Up Wheels Sand Blasting No Airborne Particles to Be Contained Rubber Bonded Wheels Cleaner Finish Cleaner Finish Cleaner Finish Faster Faster Faster 4 Factors Affecting Performance of Surface Conditioning Products Product Surface Speed Lubricant - Coolant Because product speed has a significant effect on performance (cut, life, and finish), it is important to select the proper speed for a particular operation and work piece. Generally, low speeds are desired for generating very uniform satin finishes, for finishing aluminum alloys without lubricants and for use on composite or other soft material applications. High speeds are recommended when it is desired to remove or blend surface imperfections. This high speed will result in faster cut along with finer finishes. Coolants, like water and some water soluble oils, reduce heat resulting in longer product life and greater cut. In the case of most oils or tallow lubricants, surface roughness can be reduced. The higher viscosity lubricants produce lower surface roughness, i.e., grease produces a finer surface finish than oil. In automatic or semi-automatic operations, it is desirable to use lubricants or coolants whenever possible. Product Hardness (Density) 3M wheels are available in a number of densities or hardnesses. Generally, the softer products, 2, 3, 4, and 5 density, are used for decorative finishing. They will conform more readily to surface contours along with generating a more uniform finish. The harder products, 6, 7, 8 and 9 density, are to be used for the more difficult blending, cleaning and deburring operations. Recommended Operating Speeds Decorative Finishing.....................................500 - 3000 SFPM Composites / Soft Materials .......................1200 - 2700 SFPM Cleaning and Conditioning.........................2000 - 5000 SFPM Prepolishing.................................................2000 - 7000 SFPM Oxide Removal ...........................................4500 - 6500 SFPM Deburring ....................................................5000 - 6500 SFPM Blending / Polishing....................................6000 - 8000 SFPM Cutdown Prior to Buffing ...........................7000 - 8500 SFPM Surface Speed Conversion Chart R.P.M. at Arbor or Spindle Work Pressure It is important that adequate pressure be used to generate the desired cut, finish, and life. Excess pressure, however, can result in decreased product life. Scotch-Brite wheels operate under work pressures of 10 to 40 pounds per inch of width. In the case of harder (6 - 9 density) products, high pressures are usually necessary to gain the full benefit of the wheel. 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000 3200 3400 3600 3800 4000 Feed Speed (Dwell Time) Feed speed is directly related to product life, finish and cut. Lower feed speed means longer dwell time and, thus, more work can be done on the workpiece. When an operation is set up an attempt should be made to use the fastest feed speed possible to obtain the desired results. This will give the best economic result from the standpoint of product life. In general, if product speed remains constant, fast feed speeds increase scratch length and, conversely, slow feed speeds shorten scratch length. This technique can be used to generate a particular decorative finish. Oscillation In many cases, such as decorative finishing and cleaning, it is desirable to incorporate an oscillatory motion for the purpose of increasing cut, breaking up directional scratch, and producing a uniform finish. A good starting point is 150 CPM (cycles per minute) at a stroke of 3/8 inches. This may be varied depending on the particular result desired. In off-hand operations, moving the part from side to side will provide an oscillating action and more uniform finish. 5 Diameter of wheels 18 16 14 12 10 8 6 4 Surface speed in feet per minute (S.F.P.M.) 52 104 157 207 260 314 364 419 471 105 208 314 414 520 628 728 838 942 157 312 471 621 780 942 1092 1257 1414 209 416 628 828 1040 1256 1456 1676 1885 262 520 785 1045 1310 1570 1820 2094 2356 314 630 940 1255 1570 1885 2195 2513 2827 367 735 1100 1465 1835 2200 2560 2932 3299 419 837 1256 1675 2094 2513 2932 3351 3770 471 942 1413 1885 2356 2827 3298 3770 4241 524 1047 1570 2094 2618 3141 3665 4189 4712 576 1152 1727 2304 2880 3455 4031 4608 5184 628 1256 1884 2513 3142 3769 4398 5027 5655 681 1361 2042 2723 3404 4084 4764 5445 6126 733 1466 2199 2932 3666 4398 5131 5864 6597 785 1571 2356 3142 3927 4712 5497 6283 7069 838 1675 2513 3351 4189 5026 5864 6702 7540 890 1780 2670 3560 4451 5340 6230 7121 8011 942 1885 2827 3770 4713 5650 6597 7540 8482 995 1989 2984 3979 4975 5969 6963 7959 8954 1047 2094 3141 4189 5236 6283 7330 8378 9425 1100 2199 3298 4398 5498 6597 7696 8796 9896 1152 2304 3455 4608 5760 6911 8063 9215 10367 1204 2408 3612 4817 6022 7225 8429 9634 10839 1257 2513 3770 5027 6284 7540 8796 10053 11310 1309 2618 3927 5236 6545 7854 9162 10472 11781 1361 2722 4084 5445 6807 8168 9529 10891 12252 1414 2827 4241 5655 7069 8482 9895 11310 12723 1466 2932 4398 5864 7331 8796 10262 11729 13195 1518 3037 4555 6074 7592 9110 10629 12148 13666 1571 3141 4712 6283 7854 9425 10996 12566 14137 1676 3351 5026 6702 8378 10053 11729 13404 15080 1780 3560 5340 7121 8901 10681 12462 14242 16022 1885 3769 5654 7539 9425 11309 13193 15080 16965 1990 3979 5969 7958 9948 11938 13927 15917 17907 2094 4188 6283 8377 10472 12566 14661 16755 18850 2 TM Scotch-Brite Hand Pads and Rolls When surfaces need to be cleaned, scuffed, deburred or finished by hand, Scotch-Brite hand pads and rolls outperform steel wool, wire brushes and other non-woven hand pads. They cut fast and leave a more consistent finish than these other abrasives. Scotch-Brite material will never rust and can be used with water or solvents. Truly your best choice for cleaning and finishing surfaces by hand. The world's leading surface conditioning products. 11 Hand Pads A select group of Scotch-Brite webs cut into 6" x 9" (the #5440 are 4" x 6") sheets available in a variety of grades ranging from light duty cleansing to heavy duty. Product 5440 (4" x 6" ) 7440 Color Tan 7440B Tan 7445 White 7445B White 7446 Gray 7446B Gray 7447 Maroon 7447B Maroon 7448 7448B Packaging 10 pads/box 4 boxes/case 10 pads/box 4 boxes/case 40 pads/box bulk pack 20 pads/box 3 boxes/case 60 pads/box bulk pack 10 pads/box 4 boxes/case 40 pads/box bulk pack 20 pads/box 3 boxes/case 60 pads/case bulk pack 20 pads/box 3 boxes/case 60 pads/case bulk pack Tan Light Gray Light Gray UPC No. 048011-16983 048011-04050 048011-18451 048011-16976 12 048011-17637 048011-04051 048011-18453 048011-04029 048011-04229 048011-04028 048011-14049 13 Sponge Laminates Consist of Scotch-Brite material laminated to a 31/2" x 61/4" cellulose sponge. Product 74 Color Yellow/ Green Packaging 20 sponges/case bulk pack Hand Pads for Finishing 7448 UPC No. 048011-20688 Starting Point 7447 7446 Finer Finish Less Aggressive Coarser Finish More Aggressive Hand Pads for Cleaning 7445 Finer Finish Less Aggressive 7447 Starting Point 6 7440 5440 Coarser Finish More Aggressive Production Hand Pad No. 8447 This Scotch-Brite pad delivers higher cut, longer life and a better finish. Use on aluminum, stainless steel, plastics, wood and fiberglass. Ideal for paint preparations, surface blending and scuffing. 3M's patented perforated pad tears easily into two convenient 41/2" x 6"pads. Product 8447 Color Maroon Packaging 20 pads/box 3 boxes/case UPC No. 048011-24037 14 15 Clean and Finish Rolls Cut and Polish Rolls Can be used for hand cleaning, blending, finishing. Can be cut to desired length for oscillating sanders. Scotch-Brite Cut and Polish Rolls outlast and outperform ordinary emery cloth and utility rolls around angles, odd shapes, inside and outside diameters. Applications: Stropping pipe ends for sweat soldering or welding, general cleaning and deburring odd shaped materials. Color: Tan Color: Type A - Maroon Type S - Gray Type F - White 16 17 Mineral Type/Grade UPC No.* Size Rolls/Case A CRS A MED Clean and Finish Rolls 2" x 30 ft. 6 00292 3" x 30 ft. 4 4" x 30 ft. 3 00302 00264 5" x 30 ft. 2 6" x 30 ft. 2 00306 00274 Cut and Polish Rolls 1" x 30 ft. 12 04085 2" x 30 ft. 6 05206 4" x 30 ft. 3 05207 6" x 30 ft. 2 09024 * Add Prefix 048011- to UPC No. when ordering. A FIN A VFN F SFN S MED S FIN S VFN S SFN S ULF 00291 00296 00265 00260 00261 00266 00273 00276 00269 00270 00299 00267 00268 00262 00278 00308 00277 00252 00275 05733 7 00263 00307 05170 T Sheet Rolls Multi-Flex Abrasive Sheets. A tough, highly conformable, sharp cutting, non-woven abrasive for cleaning and finishing surfaces by hand. Color: A VFN - Purple S ULF - Gray Grade and UPC No. Size Sheets/Roll A VFN 8" x 4" 60 07521 * Add Prefix 051131- to UPC No. when ordering. 19 S ULF 07522 18 20 21 22 Hand Pad Trial Pack Scotch-Brite hand pads are made of durable, three-dimensional, non-woven nylon web impregnated with abrasive minerals to outperform steel wool, wire brushes and other nonwoven hand pads. TM Product 961S Packs/ Case Contents UPC No. 5 1 Ea. Scrubbing Sponge 74 048011-17144 5 1 Ea. Light Duty Pad 6448 5 1 Ea. Heavy Duty Pad 7440 5 1 Ea. Light Duty Cleansing Pad 7445 5 1 Ea. Blending Pad 7446 5 1 Ea. General Purpose Pad 7447 5 1 Ea. Ultra Fine Pad 7448 5 1 Ea. Production Pad 8447 5 1 Ea. TWIST-LOK Pad Holder 961 23 Accessories - Hand Pads and Rolls Pad Holders No. 961 3M Mini Mandrel No. 935 The Twist-Lok Pad Holder No. 961 can be used with hand pads and roll material cut to 4" x 6". Use with 1" x 11/2" pieces of Scotch-Brite material to fit into tight areas. The overall mandrel length is 2 7/8" with a 1 /4" shank. TM 24 Product 961 Holders/Case 10 25 UPC No. 048011-09493 Product 935 Mandrels/Case 5 Maximum Operating RPMs: 14,000 8 UPC No. 048011-04020 Coated Abrasive Sheets and Rolls 3M 341T 3M Blue Grit Utility Cloth X TM Wt. 3M 311T 3M Blue Grit Utility Cloth J Wt. TM Tough aluminum oxide mineral bonded to cloth with 3M's heat resistant Resinite system. This special bonding technique allows for a more uniform coating. Your advantage is a consistent scratch pattern. Get the ``TRUE BLUE'' advantage in all operations: Contour sanding, strapping, deburring, rust removal, cut-down prior to polishing, all general maintenance work. TM 26 3M 241K Three-M-ite Elek-Tro-Cut TM TM TM X Wt. 3M 211K Three-M-ite Elek-Tro-Cut Cloth J Wt. TM TM TM These products have many uses in both production and maintenance jobs. They have a flexible cloth backing and are coated with aluminum oxide mineral. 3M 001K Crystal Bay Crocus Cloth TM TM For very fine metal finishing. 3M 011K Crystal Bay Emery Cloth TM TM Glue bond, closed coat, for non-technical use by hand in sheet form. 27 Sheets Size 9" x 11" 9" x 11" Prod. Min. I.D. Pkg./Case 341T/311T 50/250 241K/211K 50/250 9" x 11" 001K 50/250 9" x 11" 011K 50/250 Grade and UPC No.* 36X 40X 02463 50X 02462 60X 02461 180J 02456 220J 02455 240J 02454 280J 02453 36X 02414 40X 50X 02412 180J 02406 220J 02405 240J 02404 36X 40X 02435 CRS 02433 MED 02432 FIN 02431 * Add Prefix 051144- to UPC No. when ordering. 9 80J 02460 100J 02459 120J 02458 150J 02457 60X 02411 80J 02410 100J 02409 120J 02408 150J 02407 280J 02403 320J 02402 400J 12501 500J 12500 3M 341T 3M Blue Grit Utility Cloth X Wt. 3M 311T 3M Blue Grit Utility Cloth J Wt. 3M 241K Three-M-ite Elek-Tro-Cut X Wt. TM TM TM TM TM (continued) 3M 211K Three-M-ite Elek-Tro-Cut Cloth J Wt. 3M 001K Crystal Bay Crocus Cloth 3M 001K Crystal Bay Emery Cloth TM TM TM TM TM TM TM Rolls Prod. Min. Size I.D. Pkg./Case 40X 1" x 50 yds. 341T/311T 1/5 11/2" x 50 yds. 341T/311T 1/5 2" x 50 yds. 341T/311T 1/5 05143 1" x 50 yds. 241K/211K 1/5 40X 320J 05002 11/2" x 50 yds. 241K/211K 2" x 50 yds. 241K/211K 1/5 1/5 40X Grade and UPC No.* 50X 60X 80J 100J 120J 150J 180J 220J 240J 280J 05112 05111 05110 05109 05108 05107 05106 05105 05104 05103 05127 05126 05125 05124 05123 05122 05121 05120 05119 05118 05142 05141 05140 05139 05138 05137 05136 05135 05134 05133 50X 60X 80J 100J 120J 150J 180J 220J 240J 280J 05011 05010 05009 05008 05007 05006 05005 05004 05003 400J 500J 05001 05000 50X 60X 80J 100J 120J 150J 180J 220J 240J 05032 05031 05030 05029 05028 05027 05026 05025 05024 280J 320J 05022 400J 500J 05021 05020 36X 05054 50X 60X 80J 100J 120J 150J 180J 220J 240J 280J 05052 05051 05050 05049 05048 05047 05046 05045 05044 05043 320J 05042 400J 500J 05041 05040 * Add Prefix 051144- to UPC No. when ordering. Garnet Abrasive Sheets 3M 110N, 130N, 140N A, C, D Wt. TM Grades 50-280 Garnet sandpaper is the traditional choice of cabinet makers and wood workers for producing smooth, fine finishes on bare Prod. Min. I.D. Pkg./Case 50 60 140N (D Wt) 50 slv/500 10035 10034 130N (C Wt) 100 slv/1000 110N (A Wt) 100 slv/1000 * Add Prefix 051144- to UPC No. when ordering. Size 9" x 11" 28 Grade and UPC No.* 80 10033 100 120 150 180 10032 10006 10031 10005 10030 10004 10003 220 240 10002 10001 280 10000 ProductionTM Abrasive Sheets 3M 326U, 336U, 346U A, C, D Wt. TM Grades 36-220 3M Production sandpaper is an almost universal abrasive. These long lasting sheets are made with aluminum oxide, a synthetically produced mineral known for its sharpness and durability. It is ideal for hand or machine sanding of many different materials, including woods, metals, paints, plastics, and fiberglass. Prod. I.D. 346U (D Wt) Min. Size Pkg./Case 36 40 9" x 11" 50 slv/250 02119 50 slv/500 02118 336U (C Wt) 100 slv/1000 326U (A Wt) 100 slv/1000 * Add Prefix 051144- to UPC No. when ordering. 29 Grade and UPC No.* 50 60 80 02117 02116 02115 10 100 120 150 02114 02113 02112 180 220 02104 02103 9" x 11" Tri-M-IteTM Fre-CutTM Abrasive Sheets These sandpaper sheets are ideal for dry sanding between coats of varnish, paint, and other finishes. The abrasive surface has been treated with white stearate, a coating that resists clogging and extends abrasive life. The abrasive is silicon carbide, a sharp and extremely hard synthetic mineral that cuts fast and satin smooth. 3M 415U Tri-M-iteFre-CutPaper TM Open Coat A Wt. A specially treated open coat silicon carbide paper for use whenever filling or loading of the abrasive is a problem. The lightweight paper stock is intended for use with hand pad and disc sanders. These sheets offer a better finish with fewer paper changes for finishing and blending operations, white wood sanding, plastics, and fiberglass. 3M 435N Tri-M-ite Fre-Cut Paper TM Open Coat C Wt. This is a heavier, more durable sandpaper and is intended to minimize filling or loading in general purpose sanding. 30 30 3M 405N Tri-M-ite Fre-Cut Paper TM Open Coat A Wt. Type F (Flexible) 3M 414N Tri-M-ite Fre-Cut Paper TM Open Coat A Wt. T2 Flexible A weight paper ideal for hand sanding operations that involve contoured shapes. Designed to provide conformability that exceeds that of conventional abrasive sheets. Grade and UPC No.* Prod. Min. I.D. Pkg./Case 80 100 120 150 180 220 240 280 320 400 500 415U 100 slv/1000 14175 14177 14179 14181 14183 435N 100 slv/1000 02356 02355 02354 02353 405N 100 slv/1000 10248 10247 10246 10245 10244 10243 10241 10240 414N 100 slv/1000 02352 02351 02350 02349 02348 02347 02346 02345 02344 02342 * Add Prefix 051144- to UPC No. when ordering. Size 9" x 11" 9" x 11" WetordryTM Abrasive Sheets 3M WetordryTM sheets use a silicon carbide abrasive for efficient cutting and high wear resistance. They feature a waterproof resin-over-resin bond that resists heat and holds the abrasive particles more firmly than conventional glue or resin-overglue bonds. Because the sheets are resistant to oil and water, they can be used with a lubricant to reduce clogging, extend abrasive life, and improve finish. 3M 413Q Wetordry Tri-M-ite Paper A Wt. 3M 431Q Wetordry Tri-M-ite Paper C Wt. TM TM 31 Grade and UPC No.* Prod. Min. Size I.D. Pkg./Case 60 80 100 120 150 180 220 240 280 320 360 400 9" x 11" 413Q 50 slv/500 02007 02004 02003 02002 50 slv/250 02006 02005 431Q 50 slv/500 02019 10699 10697 10695 50 slv/250 02018 02017 02016 02015 02014 * Add Prefix 051144- to UPC No. when ordering. 11 Fibre Discs 3M 785C Regalite Polycut Fibre TM TM 3M 785C Discs were developed specifically for stainless steel grinding and blending. This special blend of CubitronTM Mineral and aluminum oxide minerals with a grinding aid was precisely designed for stainless steel but is also suitable for some combinations of stainless steel and carbon steel. 3M 785C is a proven performer for stainless steel fabrication, food service and restaurant equipment, dairy equipment and food products machinery. Packaging: Bulk 32 Min. Size Prod. I.D. Pkg./Case 24 41/2" x 7/8" 785C 100 5" x 7/8" 785C 100 5" x 7/8" 785C 25/100 13931 7" x 7/8" 785C 100 7" x 7/8" 785C 25/100 13937 91/8" x 7/8" 785C 25/100 13943 * Add Prefix 051144- to UPC No. when ordering. Grade and UPC No.* 36 80660 13975 13930 13967 13936 13942 50 80661 13976 13928 13968 13934 13940 60 80662 13977 80 80663 13978 13926 13970 13932 13938 13969 13933 13939 P100 P120 80654 80655 80656 80657 3M 280C - 3M Type D Open Coat TM These are full resin bond aluminum oxide fibre discs and are designed for use on portable tools with proper backup pads. Type C is closed coat and Type D is open. Type XY also incorporates a grinding aid. Type C is preferred in most industrial and automotive applications while Type D is used where loading occurs such as on solder, paint, plastic, etc. 3M 281C Fiber Disc TM Packaging: Boxed 3M 381C - 3M Type C Type XY TM Packaging: Boxed 33 Size 5" x 7/8" 7" x 7/8" 91/8" x 7/8" Prod. I.D. 280C 280C 280C Min. Pkg./Case 25/100 25/100 25/100 4" x 5/8" 41/2" x 7/8" 5" x 7/8" 7" x 7/8" 281C 281C 281C 281C 25 25 25 25 Grade and UPC No.* 16 01820 01835 01869 16 16 41/2" x 7/8" 381C 25/100 5" x 7/8" 381C 25/100 88725 7" x 7/8" 381C 25/100 01745 91/8" x 7/8" 381C 25/100 01767 * Add Prefix 051144- to UPC No. when ordering. Kut stock items 24 01819 01834 01868 24 85950 88959 85966 85973 24 77595 81369 81370 81371 36 01818 01833 01867 36 85951 85960 85967 85974 36 77596 81372 81373 81374 12 50 60 80 P100 P120 50 85954 85961 85968 85975 50 77597 81375 81376 81377 60 85955 85962 85969 85976 60 77598 01727 01741 01763 80 85956 85963 85970 85977 80 77599 20054 01740 01762 100 85957 85964 85971 85978 100 77600 20053 01739 01761 120 85958 85965 85972 85979 120 77601 20052 01738 01760 3M Abrasive Flap Discs TM The 3M 747D Abrasive Flap Disc is the new standard for offhand grinding and finishing of metals. It provides a consistent rate of cut for a superior finish and it provides long-life performance that improves quality and lowers cost. 16 35 34 Min. Size Prod. I.D. Pkg./Case 41/2" x 7/8" 747D 10 7" x 7/8" 747D 5 Maximum Operating RPMs: 41/2" dia. - 13,300 7" dia. - 8,600 36X 051111-49613 051111-49608 Grade and UPC No. 50X 60X 051111-49614 051111-49615 051111-49609 051111-49610 80X 051111-49616 051111-49611 120X 051111-49617 051111-49612 3M TN Quick Change Fibre Discs TM TN "Quick Change" is a system in which each disc has its own mounting nut hardware ( 5/8" - 11) thread and can be mounted directly on the tool with the proper accessory backup system. This enables the operator to change the product in a very efficient manner, and there is no need for a retainer nut or spanner wrench. This system is compatible with 3M Disc Pad Hubs and Face Plates as well as other backup systems. 3M 381C Three-M-ite Type "C" TM TM 3M 785C Regalite Polycut Fibre TM TM 3M 984C Regal Resin Bond Fibre TM TM 36 Min. Size Prod. I.D. Pkg./Case 36 4 1/2" 381C 25/100 88847 7" 381C 25/100 88853 4 1/2" 785C 25/100 88778 7" 785C 25/100 88829 4 1/2" 984C 25/100 88835 7" 984C 25/100 88841 * Add Prefix 051144- to UPC No. when ordering. Kut stock items Grade and UPC No.* 50 88848 88854 88779 88830 88836 88842 60 88849 88855 88780 88831 88837 88843 13 80 88850 88856 88826 88832 88838 88844 P100 88827 88833 88839 88845 100 88851 88857 P120 88828 88834 88840 88846 120 88852 88858 Accessories - Fibre Discs 3M Disc Pad Hubs and Face Plates TM 3M's Disc Pad Hubs and Face Plates are light weight, have excellent balance, and low profile for better grinding and finishing control. Full size plates give firm support to disc edge and are tapered to fit the disc shape to minimize flare and wild scratches. This system can result in long term savings in parts and changeover time. 3M Disc Pad Hubs have a 5/8"-11 thread metal insert and can be used on most face plates. 3M Disc Pad Face Plates are color coded by density: Red - extra hard: Heavy grinding. (Ribbed only) Black - hard: Heavy metal removal, large welds, etc. Gray - medium: General purpose grinding and finishing. Normal flexibility. White - soft: Finishing operations, flexible, follows contours. 3M Disc Pad Hub 3M Disc Pad Face Plate 3M Fibre Disc ** * 3M Disc Retainer Nut * 3M Disc Pad Hubs and Face Plates TM 3M Disc Pad Face Plates - Ribbed TM 38 37 Ribbed face plate results in cooler running disc. Higher pressure on the ribbed sections prolongs disc life when dulling is a problem. Available in 5", 7" and 9" diameter. New red disc is extra hard for heavy grinding. Diameter 5" 5" 5" 5" 7" 7" 7" 7" 9" 9" 9" 9" Hardness Extra hard - red Hard-black Medium-gray Soft-white Extra hard - red Hard-black Medium-gray Soft-white Extra hard - red Hard-black Medium-gray Soft-white Max. Oper. RPMs 12,000 12,000 12,000 12,000 8,500 8,500 8,500 8,500 6,500 6,500 6,500 6,500 UPC No. 051144-81732 051144-81733 051144-81734 051144-81735 051144-80514 051144-80515 051144-80516 051144-80517 051144-81728 051144-81729 051144-81730 051144-81731 Backup system for fibre discs or surface conditioning discs with a 7/8" center hole. Durable plastic hubs have 5/8"-11 threaded metal insert. Replaceable face plates are available in three color-coded densities. Hard-black is for heavy metal removal such as large welds. Medium-grey provides normal flexibility for general purpose grinding and finishing. Soft-white is used in finishing operations and contour grinding. 3M face plates are designed to resist chunking, reduce edge wear and prolong abrasive disc life. Max. Oper. Diameter Hardness RPMs Hubs 21/2" Dia. 5/8"-11 use with all sizes 21/2" Disc Pad Hub-Short Shaft Tools 41/2" Dia. 5/8"-11 use with sizes 7", 8" & 9" Face Plates 41/2" Hard - black 13,000 41/2" Medium - gray 13,000 5" Hard - black 12,000 5" Medium - gray 12,000 5" Soft - white 12,000 7" Hard - black 8,500 7" Medium - gray 8,500 7" Soft - white 8,500 9" Hard - black 6,500 9" Medium - gray 6,500 9" Soft - white 6,500 Kut stock items 14 UPC No. 051144-45205 051144-88743 051144-45190 051144-14270 051144-13325 051144-45206 051144-45207 051144-45208 051144-45192 051144-45193 051144-45194 051144-45195 051144-45196 051144-45197 3M Disc Holder Adaptors No. 9 3M Disc Retainer Nuts These adaptors will convert a sander with M10-1.25. M10-1.50 or 3/8"-24 external threaded shaft to a 5/8"-11 external threaded shaft. For use with all 3M disc pad face plates, disc pads and 3M disc pad hubs. Nuts have 5/8"-11 threaded arbor hole in three thread lengths. TM TM 39 External Thread 5 /8"-11 5 /8"-11 5 /8"-11 Internal Thread M10 - 1.25 M10 - 1.50 3 /8" -24 UPC No. 048011-22971 048011-22972 048011-22970 40 Thread Length x Thread Size 5 /8" x 5/8"-11 1 /2" x 5/8"-11 3 /8" x 5/8"-11 Thread Length 1 /2" x 5/8"-11 3M Fibre Disc Pad Hub and Retainer TM Diameter and Thread Size 41/2" x 5/8"-11 UPC No. 051144-05633 UPC No. 051144-05620 051144-05621 051144-05622 UPC No. 051131-05632 Optimum Tool Speeds/RPM To Maximize Fibre Disc Cut Rates And Life Material Type Disc Size Carbon Steel Stainless Titanium Aluminum 41/2" 8,500 RPM 7,000 RPM 2,500 RPM 7,000 RPM 5" 8,500 RPM 6,000 RPM 2,500 RPM 6,000 RPM 7" 6,000 RPM 4,500 RPM 2,000 RPM 4,500 RPM 91/8" 4,500 RPM 3,500 RPM 1,500 RPM 3,500 RPM 15 TM Roloc Discs 3MTM Roloc Disc Button Color/Grade Chart Provide a fast, efficient method for deburring, blending, finishing, removing tool marks and die polishing on all types of metals. Resist loading and shelling under severe operating conditions. They lock securely in place with just a half twist... a half twist and it's off. Each disc is color coded by grade. Ideal for use on air tools (right angle and straight) and on flexible shaft grinders. Additionally, Roloc discs and pads feature three different types of fastening systems to accommodate most any stock that you may currently have on hand. 16 24 36 40 50 60 Easy to mount...easy to change 3M coated abrasive and Scotch-Brite Roloc surface conditioning discs feature a threaded male button attached to the back of each disc for quick and easy mounting to a Roloc disc pad. With a quick half-turn, the disc is locked securely in place for the life of the disc. Each button or disc is color coded to designate grade. 41 42 100 Proper Speed Tool 150 180 220 240 280 Threaded Shaft Roloc System Roloc Disc Pad 43 400 Roloc Disc or Wheel 44 Accessories: Hook and Loop - See pg. 32. Roloc - See pg. 23. Roloc Discs TM Roloc TS Discs TM 16 Roloc TP Discs TM 45 3M 777F Regalite Polycut Resin Bond Cloth YF Wt. 3M 785C Regalite Polycut Fibre TM TM TM TM TM TM 3M's Regalite Polycut incorporates 3M CubitronTM and premium aluminum oxide minerals on a heavy YF cloth or fibre backing. Size Prod. I.D. Min. Pkg./Case 777F 777F 777F 777F 785C 50/500 50/500 50/200 50/200 25/100 777F 777F 777F 777F 50/500 50/500 50/200 50/200 24 36 40 Grade and UPC No.* 50 60 80 P100 P120 80508 80509 83694 80510 80511 80512 80513 83695 Roloc Discs 1" dia. 11/2" dia. 2" dia. 3" dia. 4" dia. 76622 76626 76629 76631 83690 76623 76627 76630 76632 83691 76624 76628 76433 76633 83692 76625 14660 14661 76634 83693 76742 76743 76746 76747 76749 76750 76751 76752 76753 76754 76755 76762 76763 76764 76765 76766 76767 76770 76771 76772 76773 76774 76775 Roloc TS Discs 1" dia. 11/2" dia. 2" dia. 3" dia. Roloc TP Discs 1" dia. 777F 50/500 11/2" dia. 777F 50/500 2" dia. 777F 50/200 3" dia. 777F 50/200 * Add Prefix 051144- to UPC No. when ordering. Kut stock items 17 3M 977F Regalloy Resin Bond Cloth 3M 963G Regal Resin Bond Cloth TM TM TM YN Wt. Grades 24-80 XF Wt. Grades P100 and P120 3M 984C Regal Resin Bond Fibre TM TM All 4" Products 3M's Cubitron ceramic aluminum oxide on a polyester backing for grinding and deburring carbon steel and aluminum. 46 Min. Size Prod. I.D. Pkg./Case 24 Roloc Discs 1" dia. 963G 50/500 11/2" dia. 963G 50/500 2" dia. 963G 50/200 11113 2" dia. 977F 50/200 3" dia. 963G 50/200 11108 3" dia. 977F 50/200 4" dia. 984C 25/100 Roloc TS Discs 1" dia. 963G 50/500 11/2" dia. 963G 50/500 2" dia. 963G 50/200 3" dia. 963G 50/200 Roloc TP Discs 1" dia. 963G 50/500 11/2" dia. 963G 50/500 2" dia. 963G 50/200 3" dia. 963G 50/200 * Add Prefix 051144- to UPC No. when ordering. Kut stock items 36 Grade and UPC No.* 50 60 80 40 11422 11449 11111 11450 11112 83587 11105 83590 83696 83697 11428 11448 11110 83588 11103 83591 83698 11427 11455 11109 83589 11102 83592 83699 82118 82119 82121 82122 82123 82126 82127 11104 82114 P100 P120 11454 11107 11425 11453 11106 11101 11100 82090 82136 82131 82135 82161 82093 82094 82095 82142 3M 983C Regal Resin Bond Fibre TM TM Grades 36, 60 and 80 Cubitron mineral coated on a 30 mil fibre backing for aggressive applications where reduced edgewear and firm support is desired. 47 Min. Size Prod. I.D. Pkg./Case Roloc Discs 2" dia. 983C 50/200 3" dia. 983C 50/200 Roloc TS Discs 2" dia. 983C 50/200 3" dia. 983C 50/200 Roloc TP Discs 2" dia. 983C 50/200 3" dia. 983C 50/200 * Add Prefix 051144- to UPC No. when ordering. 24 36 40 Grade and UPC No.* 50 60 80 22352 22349 22353 22350 22354 22351 82096 82097 82098 82099 82101 82105 18 P100 3M 361F Three-M-ite Resin Bond Cloth TM TM YF Wt. Grades 24-150, XF Wt. P180-P320 General purpose grinding, blending and deburring on all metals: aluminum oxide on tough, polyester backing. 48 Min. Size Prod. I.D. Pkg./Case 24 Roloc Discs 1" dia. 361F 50/500 11413 11/2" dia. 361F 50/500 11452 2" dia. 361F 50/200 11000 3" dia. 361F 50/200 22392 4" dia. 361F 25/100 Roloc TS Discs 1" dia. 361F 50/500 11/2" dia. 361F 50/500 2" dia. 361F 50/200 3" dia. 361F 50/200 Roloc TP Discs 1" dia. 361F 50/500 97691 11/2" dia. 361F 50/500 2" dia. 361F 50/500 3" dia. 361F 50/200 * Add Prefix 051144- to UPC No. when ordering. 36 40 Grade and UPC No.* 60 80 P100 P120 P150 P180 P240 P320 50 11412 22396 22398 22393 76429 11411 11137 22399 22394 11417 22397 22400 22395 11421 11416 22407 22401 22404 11420 11415 11414 22408 22409 22402 22403 14559 13873 11419 22405 22406 82244 11418 97669 97680 97686 76789 76790 76794 97681 76791 76795 80051 76804 82400 76798 82401 76802 76806 76799 82402 76803 76807 76808 77114 76809 76810 77115 76778 76811 77116 3M 461F Tri-M-ite Resin Bond Cloth TM TM YF Wt. Tri-M-ite Resin Bond Cloth Roloc Discs are silicon carbide on a polyester backing for grinding glass, titanium and nonferrous materials. 49 Min. Size Prod. I.D. Pkg./Case 24 36 Roloc Discs 2" dia. 461F 50/200 3" dia. 461F 50/200 12958 * Add Prefix 051144- to UPC No. when ordering. Kut stock items 40 50 Grade and UPC No.* 60 80 P100 P120 12956 12954 12957 12955 19 P150 P180 P240 P320 Roloc Surface Conditioning Discs TM Scotch-Brite Roloc discs provide a burr-free surface suitable for painting or coating. These discs can also be used for removal of light rust, oxides, and coatings. Color: A VFN - Blue A CRS - Brown A MED - Maroon S SFN - Gray Compatability of Roloc Disc Attaching System 3M Screw on Press on (1/2 Turn off and on) Roloc N/A Type III Roloc+ N/A N/A Roloc TP N/A Power Lock Roloc TS Quick Change Type II TM Roloc Roloc TS TM Size Roloc 1" x NH 11/2" x NH 2" x NH 3" x NH 4" x NH Roloc TS 11/2" x NH 2" x NH 3" x NH Roloc TP 2" x NH 3" x NH TM 50 Roloc TP TM Mineral Type/Grade UPC No. Max. Oper. RPMs Discs/Case A CRS A MED A VFN S SFN 30,000 30,000 25,000 18,000 12,000 200 200 200 100 100 048011-15393 048011-08764 048011-05528 048011-05532 048011-12954 048011-15392 048011-08765 048011-05527 048011-05531 048011-12953 048011-15391 048011-08766 048011-05523 048011-05530 048011-12952 048011-08767 048011-05522 048011-05529 30,000 25,000 18,000 200 200 100 048011-13249 048011-13253 048011-13257 048011-13250 048011-13254 048011-13258 048011-13251 048011-13255 048011-13259 25,000 18,000 200 100 048011-13237 048011-13241 048011-13238 048011-13242 048011-13239 048011-13243 048011-13256 048011-13260 Roloc SE Surface Conditioning Discs TM Scotch-Brite "SE" surface conditioning products feature a coarser, tougher, more aggressive, abrasive impregnated web construction than regular Scotch-Brite surface conditioning products. Use for heavier deburring, cleaning and finishing applications. Grade Front Color Back Color A CRS Brown Blue A MED Maroon Blue Size Roloc SE 2" x NH 3" x NH 4" x NH Roloc TS SE 2" x NH 3" x NH Roloc TP SE 2" x NH 3" x NH 28 51 Mineral Type/Grade UPC No. Max. Oper. RPMs Discs/Case A CRS A MED 25,000 18,000 12,000 200 25 25 048011-18081 048011-18082 048011-18243 048011-18471 048011-18472 25,000 18,000 200 100 048011-18085 048011-18086 25,000 18,000 200 100 048011-18083 048011-18084 Maximum Operating RPMs: Do not exceed the MOS ratings of the holders used with these Roloc products. Accessories: See Roloc Disc Pads, pg. 23. 20 EXL Roloc Unitized Wheels TM Roloc unitized wheels are strong, efficient products for edge deburring and finishing. They perform well in a variety of metal working applications and on intricate machined parts where close tolerances are important. The Roloc, Roloc TS, or Roloc+ holding systems make changing unitized wheels quick and easy. Wheel 8A CRS 8A MED 6A MED 6S FIN 2A MED 2S FIN Color Tan Tan Tan Gray Gray Gray Lettering Orange Orange Red Green Black Purple 52 Max. Oper. RPMs Size Wheels/Case EXL Roloc Unitized Wheels 2" dia. 60 22,100 3" dia. 40 15,100 EXL Roloc TS Unitized Wheels 2" dia. 60 22,100 + 3" dia. 40 15,100 + * Add Prefix 048011- to UPC No. when ordering. Mineral Type/Grade UPC No.* 8 A CRS 8 A MED 6 A MED 6 S FIN 2 A MED 2 S FIN 17194 17195 17192 17193 17190 17191 17187 17189 17185 17186 17183 17184 17198 17199 17848 17849 17202 17203 17846 17847 17844 17845 17842 17843 21 Roloc Bristle Discs TM 3M Roloc Bristle Discs are ideal for safely cleaning and stripping a wide variety of substances off of metal. The 3M Bristle Disc will easily cut through hardened enamel paint, thick dried adhesive and layers of corrosion without destroying the underlying metal or compromising your safety. In addition, the 3M Bristle Disc does not clog-up with the substances you are trying to remove, giving you a consistent finish throughout the life of the disc. 3M Bristle Discs come in sizes from 1 inch RolocTM to 7 inch x 5/8-11 thread. For hard to reach areas, try the 3 inch Radial 3M Bristle Disc. Most 3M Bristle Discs come in grades 50, 80 and 120. Color: 50X - Green 80X - Yellow 120X - White Mineral: RegaliteTM Mineral Size 1" dia. 2" dia. 3" dia. 4.5" dia. 7" dia. Trim (T=Tapered) 5 /8" 1 /2" 5 /8"T 1 /2" 5 /8"T 5 /8"-11 Thread 5 /8"-11 Thread Min. Pkg./Case 20/80 10/40 10/40 10/40 10/40 5/10 5/5 53 Grade and UPC No. Max. Oper. RPM's 30,000 25,000 25,000 18,000 18,000 12,000 6,000 50 048011-18698 80 048011-18706 048011-18730 048011-18732 048011-18535 048011-18736 048011-24242 048011-07578 048011-18734 048011-24241 048011-07577 120 048011-18710 048011-18537 048011-18733 048011-18538 048011-18737 048011-24243 Maximum Operating RPMs: The lower of the disc or the disc pad MOS rating must always be used. Roloc Bristle Discs Introductory Pack TM Product 982BS 983BS 982RS 983RS Contents 2 ea. Roloc Bristle Disc, 2" x 1/2" trim, 50x, 80x, 120x 1 ea. Roloc Disc Pad Holder, 2", Hard 2 ea. Roloc Bristle Disc, 3" x 1/2" trim, 50x, 80x, 120x 1 ea. Roloc Disc Pad Holder, 3", Hard 3 ea. 3M 777F Roloc Discs, 2", 60YF, 80YF, 120YF 2 ea. Roloc Surface Conditioning Discs, 2", ACRS, AMED, AVFN, SSFN 2 ea. Roloc SE Surface Conditioning Discs, 2", ACRS 1 ea. Roloc EXL Unitized Wheels, 2", 2SFIN, 6AMED, 8ACRS 2 ea. Roloc Bristle Disc, 2" x 5/8" tapered, 50x, 80x, 120x 1 ea. Roloc Disc Pad Holder, 2", Hard 3 ea. 3M 777F Roloc Discs , 3", 60YF, 80YF, 120YF Product 982BS 983BS 982RS 2 ea. Roloc Surface Conditioning Discs, 3", ACRS, AMED, AVFN, SSFN 2 ea. Roloc SE Surface Conditioning Discs, 3", ACRS 1 ea. Roloc EXL Unitized Wheels, 3", 2SFIN, 6AMED, 8ACRS 2 ea. Roloc Bristle Disc, 3" x 5/8" tapered, 50x, 80x, 120x 1 ea. Roloc Disc Pad Holder, 3", Hard Packs/Case UPC No. 5 048011-18696 5 048011-18697 5 048011-18694 54 22 Roloc Radial Bristle Discs TM 3M Radial Bristle Discs are abrasive-filled products with unique features designed to increase productivity in the following applications: * Remove adhesive, paint and other coatings, discoloration, heavy oxides, and surface contaminants. * Deburr and blend. * Clean and prepare surfaces before and after welding. Flexible bristles conform to the part and clean without removing base material reducing damage and rework. The unique bristle pattern reaches tight or awkward areas such as grooves and along 90 angles. 55 Size 3" dia. Trim (T=Tapered) Min. Pkg./Case 10/40 Grade and UPC No. Max. Oper. RPM's 25,000 50 048011-24276 Accessories - Roloc Discs TM 80 048011-24277 120 048011-24278 3M Roloc TS Disc Pads TM TM For use with 3M TS grinding discs and "screw on" abrasive discs. Threaded Shaft Disc Back-up Pad Diameter Hardness 1" Medium 11/2" Hard 1 1 /2" Medium 2" Extra Hard 2" Hard 2" Medium 3" Extra Hard 3" Hard 3" Medium 3" Soft 4" Medium 1 /4" Threaded Shaft Roloc Disc Proper Speed Tool 3M Roloc Disc Pads TM TM Rubber back-up pads are available in different diameters and degrees of hardness for varying grinding applications. Pads are female threaded to receive any standard 1/4"20 thread shaft. Diameter Hardness 1" Medium 11/2" Hard 1 1 /2" Medium 11/2" Soft 2" Extra Hard 2" Hard 2" Medium 2" Soft 3" Extra Hard 3" Hard 3" Medium 3" Soft 4" 5/8" -11 Hard 4" Medium 1 /4" Threaded Shaft UPC No. 051144-77724 051144-77728 051144-77729 051144-77733 051144-14212 051144-14211 051144-77737 051144-14216 051144-14215 051144-77738 051144-77740 051144-45102 3M Roloc TP Disc Pads TM Max. Oper. RPM's 30,000 30,000 30,000 30,000 25,000 25,000 25,000 20,000 20,000 20,000 18,000 15,000 12,000 12,000 Max. Oper. RPM's 30,000 30,000 30,000 25,000 25,000 25,000 20,000 20,000 18,000 15,000 12,000 UPC No. 051144-45101 051144-45100 051144-45099 051144-45098 051144-45097 051144-45096 051144-45095 051144-45094 051144-45093 051144-45091 051144-45092 051144-45090 051144-83489 051144-45179 051144-45102 TM For use with 3M TP grinding discs and with press on type abrasive discs. Diameter Hardness 1" Medium 11/2" Hard 11/2" Medium 1 Soft 1 /2" 2" Hard 2" Medium 2" Soft 3" Extra Hard 3" Hard 3" Medium 3" Soft 4" Medium 1 /4" Threaded Shaft 23 Max. Oper. RPM's 30,000 30,000 30,000 30,000 25,000 25,000 20,000 20,000 20,000 18,000 15,000 12,000 UPC No. 051144-77723 051144-77725 051144-77726 051144-77727 051144-14198 051144-14197 051144-77732 051144-77735 051144-14202 051144-14201 051144-77736 051144-77739 051144-45102 Roloc + Buttons Roloc + Holders & Button Combination Packs TM TM These buttons thread into the No.1 Roloc + Holder for use with unitized wheels. They offer this front-loading feature to allow for quick and easy wheel change. These combination packs contain one Roloc + Holder No.1 and one Roloc + Button No. 6 or 7. Product Specifications 56 /8" 3 Use With Unitized Wheels 3" Diameter and smaller x 1/8" wide x 3/8" CH Unitized Wheels 3" Diameter and smaller x 1/4" wide x 3/8" CH Sets/Case UPC No. 5 048011-14916 5 048011-14915 No. 1 and No. 7 Maximum Product Diameter Use With Oper. RPM 3 6 /8" Unitized Wheels 25,000 w/11/2" dia. 1 1/2" - 3" dia. x 1/8" 20,000 w/2" dia. wide x 3/8" CH 15,000 w/3" dia. 7 Product No. 1 and No. 6 Product No. 1 and No. 6 No. 1 and No. 7 Unitized Wheels 25,000 w/11/2" dia. 1 1/2" - 3" dia. x 1/4" 20,000 w/2" dia. wide x 3/8" CH 15,000 w/3" dia Product Buttons/Case 6 5 7 5 #6 Button is blue, #7 Button is red UPC No. 048011-15059 048011-15060 Additional Helpful Information - Coated Abrasive Roloc Discs TM TM Optimum Tool Speeds (RPM's) To Maximize Roloc Coated Abrasive Disc Cut Rates and Life. Material Type Disc Size Stainless Aluminum Steel Titanium Glass Composites 11/2" 20,000 RPM 20,000 RPM 30,000 RPM 9,000 RPM 9,000 RPM 15,000 RPM 2" 15,000 RPM 15,000 RPM 20,000 RPM 7,000 RPM 7,000 RPM 10,000 RPM 3" 10,000 RPM 10,000 RPM 15,000 RPM 4,500 RPM 4,500 RPM 8,000 RPM TM Compatibility of Roloc Disc Attaching Systems 3M (1/2 Turn off and on) Press on Screw on Roloc TP TS Type III Power Lock Type II N/A N/A Quick Change 57 58 3M Back-up Pad Non 3M Back-up Pad WARNING: Use with 3M Roloc Back-up pads for safe, secure performance. Non-3M back-up pads may have a deeper threaded cavity which causes the button to continue to tighten down during use. This can cause the button to separate from the disc resulting in disc fly off and potential operator harm. TM TM 24 StikitTM Abrasive Discs 3M Stikit products have a pressure sensitive adhesive backing for press-on, peel-off convenience. This attachment system eliminates slippage between the sander back-up pad and the abrasive resulting in higher cut rates with fewer interruptions for replacement of sandpaper. 3M 415U Stikit Tri-M-ite Fre-Cut Paper A Wt. Disc Rolls TM TM TM TM Made from A weight Tri-M-iteTM Fre-cut finishing paper, which has a special coating that resists loading. General purpose discs for wood, metal, and fiberglass sanding applications. 3M 214U Stikit White Gold Paper A Wt. TM TM 59 Disc Rolls A premium aluminum oxide abrasive product with a special coating that resists loading. This superior product is precisely graded for an excellent finish. For paint, primer, wood, metal, and fiberglass. Prod. Min. Size I.D. Pkg./Case 80 5" x NH 415U 125 roll/8 77223 250 roll/4 214U 125 roll/10 81802 175 roll/6 5" x DF 415U 125 roll/8 77224 250 roll/4 214U 125 roll/10 175 roll/6 6" x NH 415U 125 roll/8 77225 250 roll/10 214U 125 roll/8 86381 250roll/10 * Add Prefix 051144- to UPC No. when ordering. Grade and UPC No. 100 77227 120 77230 81803 81804 77228 77231 150 180 220 77234 77237 77241 81806 81808 81810 77235 77238 77242 81807 81811 77236 77239 77243 86383 86384 86385 240 320 400 81812 81997 81996 86386 86387 86388 81805 77229 77232 86389 86382 Stikit Disc Pads TM These lightweight, shock-resistant pads have a tough vinyl face that provides excellent disc adhesion yet allows quick, easy disc removal. 5" and 6" discs have a maximum operating speed of 10,000 RPM and are designed for use on dual action and random orbital sanders. Diameter 5" 5" 5" 5" 5" 5" 5" 6" 6" 6" Thickness 3 /4" 3 /4" 3 /4" 3 /4" 1 1/4" 3 /4" 11 /16" 5 /16" 3 /4" 3 /4" Thread /16" -24 external 5 /16" -24 external 5 /16" -24 external 5 /16" -24 external (soft) 5 /16" -24 external (soft) 5 /8" -11 internal 5 /8" -11 internal 6-Bolt holes 5 /16" -24 external 5 /16" -24 external 5 Face Color Blue Silver Red Blue Black Red Red OUS Blue Silver 25 Case Qty. 10 10 10 10 10 10 1 5 10 10 Max. RPM 10,000 10,000 10,000 R/O only R/O only 10,000 9,000 10,000 10,000 10,000 UPC 051144-05575 051144-45215 051144-81821 051144-83211 051144-82178 051144-82189 051144-82655 051144-05697 051144-05576 051144-45216 PSA Discs PSA (pressure sensitive adhesive) Discs provide a fast, efficient method for deburring, blending and cleanup on hard-toget-at areas. Adhesive-backed PSA Discs adhere and remove quickly and easily to speed disc change time. Use 3M PSA discs for all kinds of work. These tough fastcutting discs resist loading and shelling under severe operating conditions. 3M Three-M-ite Resin Bond PSA TM TM Aluminum oxide resin bond cloth PSA (pressure sensitive adhesive) discs provide a fast, efficient method for deburring, blending and cleanup. 60 Prod. Min. Size I.D. Pkg./Case 24 36 40 50 60 1 /2" 248D 50/500 97632 97633 97634 20951 3 /4" 248D 50/500 97639 97640 97641 20943 1" 248D 50/500 20936 97644 20934 20933 11/2" 248D 50/500 97646 20923 20922 2" 248D 50/200 20913 20912 20911 20910 2" 218K 50/200 3" 248D 50/200 01338 01337 01335 01334 01333 4" 248D 50/200 20900 21499 20899 20898 5" 248D 50/250 20891 20890 20889 20888 6" 248D 50/250 21639 21731 20879 20878 8" 248D 50/250 20874 20873 20872 20871 9" 248D 50/250 97657 97658 97659 20866 10" 248D 10 49536 49537 49538 49689 12" 248D 10 88906 88905 88904 88903 15" 248D 10 88895 88894 88893 88892 16" 248D 10 88890 88889 88888 88887 18" 248D 10 88882 88881 49691 88880 20" 248D 10 88878 88877 88876 88875 24" 248D 10 20802 20801 20800 20799 30" 248D 10 20793 20792 97666 20791 Add Prefix 051111- to UPC No. when ordering 10" size. * Add Prefix 051144- to UPC No. when ordering all other sizes. Kut stock items 26 Grade and UPC No.* 80 100 120 20950 20949 20948 20942 20941 20940 20932 20931 20930 20921 20920 20919 20909 20908 20907 01332 20897 20887 20877 20870 20865 49688 88902 88891 88886 88879 88874 20798 97668 01331 20896 20886 20876 20869 97660 49539 88901 49692 49690 97665 01330 97649 20885 21497 20868 97661 49540 150 97635 97642 97647 20906 180 97636 20939 20928 20917 20905 240 97637 20938 20927 20916 20903 320 97638 97643 97645 97648 01329 97650 20884 97655 01328 97651 20883 21496 20732 01326 01306 97652 97653 20881 97654 97656 20867 88900 88899 3M 778F Regalite Polycut Resin Bond Cloth PSA YF Wt. TM TM TM A tough, durable blend of 3M's Cubitron mineral and aluminum oxide and a grinding aid. 61 Min. Size Prod. I.D. Pkg./Case 36 40 50 12" 778F 10 88869 88873 88872 * Add Prefix 051144- to UPC No. when ordering. 60 88871 Accessories - PSA Discs 3M PSA Disc Holders TM Disc holders are used with any electric or air grinding tool that accommodates an 1/4" shank. 62 Diameter and Shank 1 /2" x 1/4" 3 /4" x 1/4" 1" x 1/4" 11/2" x 1/4" 2" x 1/4" 3" x 1/4" 4" x 1/4" 5" x 1/4" Max RPMs 20,000 20,000 20,000 20,000 15,000 10,000 7,500 6,000 UPC No. 051144-45074 051144-45073 051144-45072 051144-45071 051144-45070 051144-05510 051144-45069 051144-45068 27 Grade and UPC No.* 80 100 120 150 88870 180 240 320 Surface Conditioning Discs Surface conditioning discs and Roloc discs and wheels can be used on right angle grinders and die grinders. Proper Speed Tool 3M Disc Holder (Hook and loop) 63 Surface Conditioning Disc Hook and Loop System Surface Conditioning Discs (Hook and Loop) Scotch-Brite Surface Conditioning Discs are best for finishing, cleaning and light deburring on flat metal surfaces. Used on right angle (high speed and low speed), orbital, and dual action power hand tools. 64 Color: A CRS - Brown A MED - Maroon A VFN - Blue S SFN - Gray Mineral Type/Grade UPC No. Size 11/2" x NH 2" x NH 3" x NH 4" x NH 41/2" x NH 5" x NH 5" x 7/8" 6" x NH 7" x NH 8" x NH Discs/Case 200 200 100 100 50 50 50 50 25 25 Maximum Operating RPMs: 11/2" dia. - 25,000 2" dia. - 23,000 3" dia. - 20,000 4" dia. - 13,000 41/2" dia. - 13,000 A CRS 048011-04118 048011-07458 048011-04120 048011-07450 048011-14101 048011-00750 048011-16047 048011-03927 048011-00751 048011-00752 A MED 048011-04122 048011-07459 048011-04124 048011-007451 048011-14100 048011-00643 048011-00644 048011-03928 048011-00645 048011-00670 5" dia. - 10,000 6" dia. - 8,000 7" dia. - 6,000 8" dia. - 6,000 The lower of the disc or the disc pad MOS rating must always be used. See pg. 32. Accessories: See 3M Disc Pad Holders (Hook and Loop) on pg. 32. 28 A VFN 048011-04275 048011-04276 048011-04277 048011-04278 048011-14099 048011-04303 S SFN 048011-04126 048011-04127 048011-04128 048011-04129 048011-14102 048011-00647 048011-04304 048011-04305 048011-04306 048011-00648 048011-00649 SE Surface Conditioning Discs (Hook and Loop) "SE" Surface Conditioning Discs feature a coarser, tougher more aggressive web construction than our regular surface conditioning discs for heavier deburring, cleaning and finishing applications. Color: A CRS - Brown A MED - Maroon A VFN - Blue S SFN - Gray 65 Mineral Type/Grade UPC No. Size 2" x NH 3" x NH 4" x NH 41/2" x NH 5" x NH 6" x NH 7" x NH 8" x NH Discs/Case 200 100 100 50 50 50 25 25 Maximum Operating RPMs: 11/2" dia. - 25,000 2" dia. - 22,000 3" dia. - 18,000 4" dia. - 13,000 41/2" dia. - 13,000 A CRS 048011-18021 048011-18079 048011-18080 A MED 048011-18473 048011-18474 048011-18475 048011-18476 048011-18919 A VFN S SFN 048011-19658 048011-17866 048011-17239 048011-18477 5" dia. - 10,000 6" dia. - 8,000 7" dia. - 6,000 8" dia. - 6,000 The lower of the disc or the disc pad MOS rating must always be used. See pg. 32. Accessories: See 3M Disc Pad Holders (Hook and Loop) on pg. 32. Coating Removal Discs (Hook and Loop) The Coating Removal Disc features our popular Clean and Strip web for right angle tools. This rugged open web is virtually non-loading to make surface preparation faster and easier. Aggressively tackles your toughest cleaning jobs. Mineral Type/Grade UPC No. Size Discs/Case SXCS 4" x NH 40 048011-18481 41/2" x NH 40 048011-18482 5" x NH 40 048011-18483 7" x NH 20 048011-18485 Recommended Operating RPMs: 4" dia. - 5,000-8,000 5" dia. - 4,200-6,300 41/2" dia. - 4,700-7,000 7" dia. - 3,000-4,500 66 29 Clean & Strip Discs Handle tough cleaning and stripping jobs with an extra coarse, open web. Designed to work faster and safer than wire brushes. Scotch-Brite Clean & Strip discs are surface conditioning web cut into circular discs to the customer's diameter and center hole specifications. Discs can be used single or multiple loaded onto a spindle and used on edge. Applications: Stripping paint from metal surfaces, inspecting welds, removing coatings and preparing surfaces for recoating, cleaning concrete molds and forms, general plant maintenance. Color: Black 67 Size 2 x 1/4" 3 x 1/4" 3 x 1/2" 4 x 1/4" 4 x 3/8" 4 x 1/2" 4 x 5/8" 5 x 1/2" 6 x NH 6 x 1/4" 6 x 3/8" 6 x 1/2" 6 x 5/8" 6 x 7/8" 7 x 5/8" 7 x 7/8" 8 x 1/2" 8 x 5/8" Discs/Case 100 50 50 25 25 25 25 25 15 15 15 15 15 15 15 15 15 15 Max. Oper. RPMs 12,000 8,500 8,500 6,000 6,000 6,000 6,000 5,000 4,000 4,000 4,000 4,000 4,000 4,000 3,500 3,500 3,000 3,000 Mineral Type/Grade UPC No. S XCS 048011-00931 048011-00935 048011-00937 048011-07460 048011-00940 048011-00941 048011-00942 048011-00943 048011-00945 048011-00946 048011-00947 048011-00948 048011-00949 048011-00950 048011-00954 048011-00955 048011-00957 048011-00958 Proper Speed Tool Mandrel No. 933 or 934 Disc 30 High Strength Discs MED: Very conformable. For finishing using bench motors, horizontal grinders or drill motors. Applications: Antique finishing or highlighting, satin finishing aluminum extrusions, oxide and light coating removal, stainless steel finishing. Color: Type A - Maroon VFN: Designed for light deburring work. A built-in lubricant provides longer life. Very conformable and excellent for finer antique finishing. Applications: Light gear deburring, keyway and o-ring slot edge radiusing, antique finishing builders hardware. Color: Type A - Maroon Type S - Brown Mineral Type/Grade UPC No. Size 6 x 1/4" 6 x 1/2" 8 x 1/4" 8 x 1/2" 8 x 3/4" Max. Oper. RPMs 4,000 4,000 3,000 3,000 3,000 Discs/Case 100 100 50 50 50 68 A MED 048011-04188 048011-03992 3M Mandrels Mandrels are corrosion protected and machined to industrial standards for thread size and shaft diameters. Furnished complete with washers to fit available disc sizes. Product 933 Use With 2"-3" dia. discs 934 3"-6" dia. discs Size 2" lg x 1/4" shank 1" washer 31/16" lg x 1/4" shank 21/2" washer 69 Mandrel No. 933 Product 933 934 70 Mandrel No. 934 Mandrels/Case 5 1 UPC No. 048011-13968 048011-04021 Maximum Operating RPMs: 933 -- 14,000 934 w/3" wheel - 12,000 w/4" wheel - 8,500 w/6" wheel - 6,000 The lower of the disc or mandrel MOS must always be used. 31 A VFN 048011-00666 048011-00665 048011-00673 048011-00672 S VFN 048011-16777 048011-16778 048011-16780 048011-05304 Accessories - Surface Conditioning Discs & Intro. Packs 3M Disc Pad Holders (Hook and loop) Introductory Packs For use with Surface Conditioning Discs Convenient introductory packs of Scotch-Brite Surface Conditioning Discs, Roloc Surface Conditioning Discs, EXL Wheels, Coating Removal Discs and holders. An easy way to evaluate the right product, size and grade for your applications. TM 71 Product 914S Disc Pad Holder No. 905 73 Disc Pad Holder No. 922 72 914CS Disc Pad Holder No. 917 Product 9215 922 923 924 914 914 914 9145 9145 9145 9145 905 915 915 915 906 916 917 918 945 947 947M Dia. 11/2" 2" 3" 4" 4" 4" 4" 41/2" 41/2" 41/2" 41/2" 5" 5" 5" 5" 6" 6" 7" 8" 5" 7" 7" HubMax. Oper. Pads/ Shank RPMs Case 1 /4" M 25,000 10 1 /4" M 23,000 10 1 /4" M 20,000 10 1 /4" M 13,000 5 1 /2"-13 F 13,000 1 5 /8"-11 F 13,000 1 M14 - 2.0 F 13,000 1 1 /2"-13 F 13,000 1 5 /8"-11 F 13,000 1 M10-1.25 F 13,000 1 M14 - 2.0 F 13,000 1 5 /16"-24 M 10,000 1 1 /2"-13 F 10,000 1 5 /8"-11 F 10,000 1 M14 - 2.0 F 10,000 1 5 /16"-24 M 8,500* 1 5 /8"-11 F 10,000 1 5 /8"-11 F 6,000 1 5 /8"-11 F 6,000 1 5 /16"-24 M 12,000 1 5 /8"-11 F 6,000 1 M14 - 2.0 F 6,000 1 * 10,000 on Random Orbital Sanders UPC No. 048011-04130 048011-07494 048011-04132 048011-07492 048011-05673 048011-05674 048011-05677 048011-14110 048011-14111 048011-14112 048011-14114 048011-09448 048011-05679 048011-05680 048011-05681 048011-09449 048011-05682 048011-09450 048011-09451 051144-13625 051144-13627 051131-07394 9145S 9145CS 915S 915CS 917S M = Male threaded F = Female threaded Roloc + Holders TM 917CS This holder is made of durable plastic for less critical grinding and surface conditioning applications. Use with EXL Roloc Unitized Wheels. Product Dia. 1 1" Max. Oper. Holders/ RPMs Case UPC No. 25,000 5 048011-15408 Use With EXL Roloc Unitized Wheels 1 1 2 1 /2" 1 /2" diameter 25,000 Roloc Discs 3 2" 2" diameter 25,000 Roloc Discs 4 3" 3" diameter 20,000 Roloc Discs See page 19 for additional information. 5 048011-15409 5 048011-15410 5 048011-15411 920S 32 Contents Surface Conditioning Disc - 4" Dia. 1 ea. S SFN (Gray) 1 ea. A VFN (Blue) 1 ea. A MED (Maroon) 1 ea. A CRS (Brown) Disc Pad Holder (Hook and Loop) 1 ea. 914 5/8" -11 Coating Removal Disc - 4" Dia. 1 ea. S-XCS (Black) Disc Pad Holder (Hook and Loop) 1 ea. 914 5/8" -11 Surface Conditioning Disc - 41/2" Dia. 1 ea. S SFN (Gray) 1 ea. A VFN (Blue) 1 ea. A MED (Maroon) 1 ea. A CRS (Brown) Disc Pad Holder (Hook and Loop) 1 ea. 9145 5/8" -11 Coating Removal Disc - 41/2" Dia. 1 ea. S-XCS (Black) Disc Pad Holder (Hook and Loop) 1 ea. 9145 5/8" -11 Surface Conditioning Disc - 5" Dia. 1 ea. S SFN (Gray) 1 ea. A VFN (Blue) 1 ea. A MED (Maroon) 1 ea. A CRS (Brown) Disc Pad Holder (Hook and Loop) 1 ea. 915 5/8" -11 Coating Removal Disc - 5" Dia. 1 ea. S-XCS (Black) Disc Pad Holder (Hook and Loop) 1 ea. 915 5/8" -11 Surface Conditioning Disc - 7" Dia. 1 ea. S SFN (Gray) 1 ea. A VFN (Blue) 1 ea. A MED (Maroon) 1 ea. A CRS (Brown) Disc Pad Holder (Hook and Loop) 1 ea. 917 5/8" -11 Coating Removal Disc - 7" Dia. 1 ea. S-XCS (Black) Disc Pad Holder (Hook and Loop) 1 ea. 917 5/8" -11 Surface Conditioning Discs -2" Dia. 2 ea. S SFN (Gray) 2 ea. A VFN (Blue) 4 ea. A MED (Maroon) 4 ea. A CRS (Coarse) Surface Conditioning Discs - 3" Dia. 2 ea. S SFN (Gray) 2 ea. A VFN (Blue) 4 ea. A MED (Maroon) 4 ea. A CRS (Brown) Disc Pad Holders (Hook and Loop) 1 ea. 922 1/4" Collet 1 ea. 923 1/4" Collet Introductory Packs (Continued) Product 9815S 982S 983S 984WS 785SS Contents 777F Regalite Polycut RB Cloth Roloc Discs 11/2" Dia. 3 ea. 60YF 3 ea. 80YF 3 ea. P120YF Roloc Surface Conditioning Discs 11/2" Dia. 2 ea. S SFN (Gray) 2 ea. A VFN (Blue) 2 ea. A MED (Maroon) 2 ea. A CRS (Brown) Roloc Disc Pad 11/2" Dia. 1 ea. Hard 1 ea. 1/4" Threaded Shaft 777F Regalite Polycut RB Cloth Roloc Discs 2" Dia. 3 ea. 60YF 3 ea. 80YF 3 ea. P120 YF Roloc Surface Conditioning Discs 2" Dia. 2 ea. S SFN (Gray) 2 ea. A VFN (Blue) 2 ea. A MED (Maroon) 2 ea. A CRS (Brown) Roloc Disc Pad 2" Dia. 1 ea. Hard 1 ea. 1/4" Threaded Shaft 777F Regalite Polycut RB Cloth Roloc Discs 3" Dia. 3 ea. 60YF 3 ea. 80YF 3 ea. P120YF Roloc Surface Conditioning Discs 3" Dia. 2 ea. S SFN (Gray) 2 ea. A VFN (Blue) 2 ea. A MED (Maroon) 2 ea. A CRS (Brown) Roloc Disc Pad 3" Dia. 1 ea. Hard 1 ea. 1/4" Threaded Shaft 984C Regal Resin Bond Fibre Roloc Discs 4" Dia. 1 ea. 36 1 ea. 50 1 ea. 60 1 ea. 80 Roloc Surface Conditioning Discs 4" Dia. 1 ea. A VFN (Blue) 1 ea. A MED (Maroon) 1 ea. A CRS (Brown) Roloc SE Surface Conditioning Disc 4" Dia. 1 ea. A CRS (Brown/Blue) Roloc Disc Pad 4" x 5/8" - 11 1 ea. hard 785C Regalite Polycut Resin Bond Fibre Roloc Discs 4" Dia. 1 ea. 36 1 ea. 50 1 ea. 60 1 ea. 80 1 ea. 100 1 ea. 120 Roloc Surface Conditioning Discs 4" Dia. 1 ea. A VFN (Blue) 1 ea. A MED (Maroon) 1 ea. A CRS (Brown) Roloc SE Surface Conditioning Discs 4" Dia. 1 ea. A CRS (Brown/Blue) Roloc Disc Pad 4" x 5/8" - 11 1 ea. hard Product 985S 987S 988S Product 914S 914CS 9145S 9145CS 915S 915CS 917S 917CS 920S 9815S 982S 983S 984WS 785SS 985S 987S 988S 33 Contents Roloc Surface Conditioning Discs - 2" Dia. 2 ea. S SFN (Gray) 2 ea. A VFN (Blue) 2 ea. A MED (Maroon) 2 ea. A CRS (Brown) Roloc Surface Conditioning Discs - 3" Dia. 2 ea. S SFN (Gray) 2 ea. A VFN (Blue) 2 ea. A MED (Maroon) 2 ea. A CRS (Brown) Roloc Disc Pads 1 ea. 2" Medium 1 ea. 3" Medium 2 ea. 1/4" Threaded Shaft EXL Roloc Unitized Wheel - 2" Dia 1 ea. 2S FIN 1 ea. 2A MED 1 ea. 6S FIN 1 ea. 6A MED 1 ea. 8A MED 1 ea. 8A CRS Roloc+ Holder 1 ea. No. 1 EXL Roloc Unitized Wheel - 3" Dia. 1 ea. 2S FIN 1 ea. 2A MED 1 ea. 6S FIN 1 ea. 6A MED 1 ea. 8A MED 1 ea. 8A CRS Roloc+ Holder 1 ea. No. 1 Packs/Case UPC No. 5 048011-08707 5 048011-18428 5 048011-14105 5 048011-18427 5 048011-08713 5 048011-18426 5 048011-04270 5 048011-18430 5 048011-18253 5 051144-82901 5 051144-82899 5 051144-82900 5 051144-83490 5 051144-83491 5 048011-18254 5 048011-17181 5 048011-17182 Belts - Bench Top For bench top or bench area sanding and grinding, 3M offers products to make your work go fast and easy with superior results. 3M 777F Regalite Polycut Resin Bond Cloth YF Wt. TM TM TM 3M 777F Regalite Polycut Resin Bond Cloth combines superb performance with long life to bring quality and economy to a variety of operations. It grinds cool with a high cut rate to deliver the finish you're looking for. The product is a combination of 3M Cubitron mineral and special aluminum oxide mineral coated on a firm Y wt. synthetic backing. It also incorporates a grinding aid to provide optimum performance on stainless steel and nickel alloy offhand and medium pressure grinding applications. 74 3M 707E Regalite Polycut Resin Bond Cloth JE Wt. TM TM TM 3M 707E Regalite Polycut Resin Bond Cloth provides a smooth, cool, fast cut that you can depend on for high-quality results. 3M 707E incorporates a blend of 3M Cubitron mineral and aluminum oxide minerals and grinding aid on a very flexible J weight synthetic backing. Ideal for a wide range of applications requiring conformability on a variety of materials, such as stainless steel and high nickel alloys. Min. Size Prod. I.D. Pkg./Case 2" x 60" 777F 10/50 2" x 60" 777F 25/50 2" x 72" 777F 10/50 2" x 72" 777F 25/50 31/2" x 151/2" 777F 10/50 6" x 48" 777F 10/20 6" x 48" 777F 20 31/2" x 1 51/2" 707E 10/50 * Add Prefix 051144- to UPC No. when ordering. Filmlok # Fabrilok 75 Grade and UPC No.* 36 50 60 80 P120 80286 14884 81767 #77476 #77333 76679 76733 77663 77152 76531 76523 #77336 #77334 82313 80176 82153 80246 34 3M 241D Three-M-ite Resin Bond Cloth TM TM X Wt. 3M's standard aluminum oxide X-weight cloth. 3M 240D Three-M-ite Resin Bond Cloth Open Coat X Wt. TM TM An aluminum oxide, resin bonded open coat construction on an X-weight drills cloth backing, exhibiting greater flexibility than the closed coat version. 76 Prod. Min. Size I.D. Pkg./Case 24 36 40 #26443 26441 11/2" x 60" 241D 10/50 11/2" x 60" 241D 25/100 26426 26425 2" x 60" 241D 10/50 2" x 60" 241D 25/50 26320 2" x 72" 241D 10/50 2" x 72" 241D 25/50 26408 26405 21/2" x 60" 241D 10/50 1 2 /2" x 60" 241D 25/50 6" x 48" 241D 10/20 26533 26531 26529 6" x 48" 241D 20 4" x 27" 240D 10/50 * Add Prefix 051144- to UPC No. when ordering. Filmlok # Fabrilok Kut stock items Grade and UPC No.* 50 60 80 100 120 150 180 220 240 320 400 26440 26438 26436 26435 26434 26433 26431 26430 26424 33640 33639 26420 33667 33638 33637 26415 33636 #26317 26316 33067 26313 26312 76336 26309 26307 81752 26305 11658 26404 #26400 26396 33635 26388 26386 26385 26383 26382 #11645 26524 27447 35 26521 26519 26518 26517 26515 26514 26513 26512 Deburring Belts - Portable Tool 3M offers a complete line of coated abrasive belt constructions to meet all of your grinding, deburring and sanding needs. 3M 777F Regalite Polycut Resin Bond Cloth YF Wt. TM TM TM The product is a combination of 3M Cubitron mineral and special aluminum oxide minerals coated on a firm Y wt. synthetic backing. It also incorporates a grinding aid to provide optimum performance on stainless steel and nickel alloy offhand and medium pressure grinding applications. TM 3M 741E Regalite Resin Bond Cloth TM TM XE Wt. 3M 751E Regalite Resin Bond Cloth TM TM XE Wt. Unique combination of Cubitron & aluminum oxide minerals on strong rayon backing. 77 3M 241E Three-M-ite Resin Bond Cloth TM TM XE Wt. Grades 50 and Finer 3M 251E Three-M-ite Resin Bond Cloth Type HO XE Wt. Grades 36 and 40 TM TM A high performance aluminum oxide mineral coated on a firm synthetic backing, providing superior aggressiveness and edge wear resistance. 3M 240D Three-M-ite Resin Bond Cloth Open Coat X Wt. 3M 241D Three-M-ite Resin Bond Cloth TM TM TM TM X Wt. Aluminum oxide X-weight cloth. Size /4" x 24" 1 /2" x 12" 1 /2" x 18" 1 /2" x 24" 1 /4" x 201/2" 1" x 30" 3 1" x 42" Grade and UPC No.* Prod. Min. I.D. Pkg./Case 36 40 50 60 80 100 P120 #13280 741E/751E 50/200 #13276 741E 50/200 #80551 #80232 777F 50/200 #13733 741E 50/200 #77408 #77065 #77491 #81064 777F 50/200 #77643 #13272 741E/751E 50/200 #13268 741E 50/200 # #77407 777F 50/200 82252 741E/751E 50/200 76527 77512 777F 50/200 Grade and UPC No.* Prod. Min. Size I.D. Pkg./Case 36 40 50 60 80 100 120 150 180 220 240 320 1 #71053 /8" x 24" 241E 50/200 1 #30290 #26733 #26732 #32407 #26731 #26730 #26729 /4" x 24" 241E/251E 50/200 1 #32417 #26895 #31170 #26894 #26893 #26892 #31074 #32398 /2" x 12" 241E/251E 50/200 1" x 12" 241D 50/200 26884 26881 1 #72227 #72228 #14754 #72229 /2" x 18" 241E/251E 50/200 #77632 #72226 1 /2" x 24" 241E/251E 50/200 #32375 #26726 #26725 #26723 #26720 #26719 #26717 #26716 #26715 #26714 #32399 #26713 1 #34176 /2" x 42" 241E 50/200 3 #26776 /4" x 201/2" 241E/251E 50/200 #26784 #26783 #26782 #26781 #26780 #26779 #26778 #33911 #33912 #32157 #32158 #32160 1" x 30" 241E/251E 50/200 #32161 32090 1" x 42" 241E 50/200 241D 50/200 #26614 #26612 #31823 #26609 31774 26606 33795 26602 26601 26600 26599 26597 240D 11/2" x 1815/16" 241D 10/50 26822 26820 26819 26818 26816 26814 * Add Prefix 051144- to UPC No. when ordering. Filmlok # Fabrilok 36 Kut stock items Belts - Portable The product selection for portable belts ranges from our standard aluminum oxide to our premium 761D product, which is a blend of 3M's proprietary Cubitron mineral and premium aluminum oxide. These belts deliver a fast cut which means a time savings for you! 3M 761D Y Wt. TM The new 3M 761D portable belts are a revolutionary step in the advancement of coated abrasive belt sanding for portable belt applications. 3M 241D Three-M-ite RB Cloth X Wt. TM TM 3M's standard aluminum oxide X-weight cloth. 3M 240D/240A Three-M-ite RB Cloth Open Coat X Wt. TM TM 78 An aluminum oxide, resin bonded open coat construction on an X-weight drills cloth backing, exhibiting greater flexibility than the closed coat version. 3M 441D Three-M-ite RB Cloth X Wt. TM TM Silicon carbide mineral coated on a cloth backing. Size 3" x 18" 3" x 21" 3" x 24" 4" x 24" Size 3" x 18" Grade and UPC No.** * Prod. Min. I.D. Pkg./Case 761D 5/25 761D 5/25 761D 5/25 761D 5/25 Prod. Min. I.D. Pkg./Case 241D*** 10/40 50 81393 81399 81410 81429 3" x 21" 24 36 01416-3 150 40 180 36 40 150 180 36 01422-4 150 01528-3 36 27501 150 36 40 01423-1 180 01529-0 40 27500 180 32943 40 150 180 10/50 241D*** 10/40 240D/240A 10/50 120 71785 24 02679-1 120 01428-6 24 120 27495 24 441D 80 81395 81401 81412 81431 P100 81396 81402 81413 81432 P120 81397 81403 81414 81433 P150 81398 81404 81415 81434 Grade and UPC No.** *** 120 01421-7 24 240D 60 81394 81400 81411 81430 50 01417-0 220 80 01419-4 320 100 01420-0 100 240 80 30639 320 50 01424-8 220 02689-0 50 27499 220 60 01425-5 240 80 01426-2 320 100 01427-9 60 27498 240 80 27497 320 100 27496 50 60 80 100 220 240 320 50 71512 220 60 240 60 10/50 120 * The color purple is a trademark of 3M. Kut stock items 37 Portable Sander Belts (Continued) Size 3" x 233/4" Prod. Min. I.D. Pkg./Case 241D*** 10/40 240D/240A 3" x 24" 31/2" x 151/2" 4" x 21" 10/40 240D/240A 10/50 441D 10/50 241D 240D 4" x 213/4" 241D*** 240D 24 120 36 02645-6 150 24 36 120 27478 24 02681-4 120 01435-4 24 27477 120 27470 24 150 36 01429-3 150 01536-8 36 27476 150 27469 36 40 01430-9 180 40 27475 180 27468 40 50 01431-6 220 02657-9 50 27474 220 71521 50 120 150 180 220 240 320 24 77290-2 120 02663-0 24 36 26860-3 150 26851-1 36 40 50 26858-0 220 60 26857-3 240 80 26856-6 320 100 26853-5 40 50 80 100 120 150 180 220 60 01575-7 240 320 24 36 40 150 180 60 27494 240 80 27493 320 100 120 74349 24 50 31412 220 36 40 60 80 100 120 02677-7 24 150 180 50 02669-2 220 240 320 36 40 50 27489 220 60 27488 240 80 27487 320 100 27486 80 01440-8 320 100 01441-5 80 27462 320 100 27461 10/50 241D*** 241D*** Grade and UPC No.** *** 10/40 40 50 180 220 40 27483 180 50 02661-6 180 220 60 26740-8 240 80 02648-7 320 100 60 27481 240 80 27480 320 100 27479 60 01432-3 240 02659-3 60 27473 240 80 01433-0 320 100 01434-7 80 27472 320 100 27471 60 80 100 02665-4 10/40 10/50 10/40 10/50 120 150 180 27485 24 36 40 50 60 4" x 24" 241D*** 10/40 02685-2 01436-1 01437-8 01438-5 01439-2 120 150 180 220 240 01442-2 01539-9 24 36 40 50 60 240D/240A 10/50 27467-3 27466-6 27465-9 27464 27463 120 150 180 220 240 27460 27459-8 27458 ** For Product I.D. 240A, 240D and 441D, add prefix 051144- to UPC number when ordering. *** For Product I.D. 241D, add prefix 078-91040- to UPC number when ordering. Add prefix 051144- to UPC number when ordering. Add prefix -078 to UPC number when ordering. Kut stock items 38 TM Scotch-Brite Surface Conditioning Scotch-Brite surface conditioning belts are used worldwide to finish, polish and buff metal, wood and plastic surfaces. Recommended operating speeds: Generally, low speeds are recommended for generating very uniform satin finishes, finishing aluminum alloys without lubricants, and woodworking applications. Higher speeds are recommended when removing imperfections prior to buffing. High belt speed will result in faster cut along with finer finishes. Application Decorative Finishing Wood Sanding Deburring Cleaning and Conditioning Oxide Removal Recommended SFPM 500-3,000 SFPM 1,200-2,700 SFPM 5,000-6,500 SFPM 2,000-5,000 SFPM 4,500-6,500 SFPM 79 Polishing: fewer steps Scotch-Brite surface conditioning belts refine rough surfaces with little or no dimensional change to the workpiece --and they can finish the job in fewer steps than conventional products, while generating a uniform scratch pattern. SFPM = Surface Feet Per Minute 81 80 Grindline conditioning: fast and easy Satin Finishing: quick and consistent Grindlines, milling marks or microburrs left by cutting tools or other abrasives can be quickly and easily conditioned with Scotch-Brite belts, leaving a consistent and burr-free surface. The belts will also blend scratches and blemishes so they won't show through most paint systems. Surfaces conditioned with Scotch-Brite belts are easy-to-clean and easy-to-coat, reducing production steps and costs. With Scotch-Brite belts on your automatic equipment or portable power tools, you can quickly produce consistent satin finishes on a variety of metals. And using Scotch-Brite belts in tandem with 3M coated abrasive discs and belts on stainless steel, you can match #3 and #4 finishes. 39 Surface Conditioning Belts A reinforced non-woven nylon material spliced into belt form provides a more consistent, more appealing finish in decorative finishing applications. Resists loading and reduces heat build-up, increasing life and improving performance. Designed for cleaning, finishing and light deburring operations using standard abrasive belt equipment. A VFN - Blue A MED - Maroon A CRS - BROWN S SFN - Gray SE Surface Conditioning Belts New Scotch-Brite brand "SE" surface conditioning products feature a more aggressive mineral in this non-woven nylon abrasive impregnated web construction than regular ScotchBrite surface conditioning belts. Front Color Back Color A CRS Brown Blue A MED Maroon Blue 82 Mineral Type/Grade UPC No. Size /4" x 18" 1 /4" x 24" 1 /2" x 12" 1 /2" x 18" 1 /2" x 24" 3 /4" x 18" 1" x 18" 1" x 30" 1" x 42" 2" x 1815/16" 2" x 34" 2" x 48" 2" x 60" 2" x 72" 2" x 132" 21/2" x 60" 23/4" x 151/2" 3" x 1011/16" 3" x 18" 3" x 21" 3" x 24" 3" x 72" 3" x 132" 31/2" x 151/2" 4" x 24" 4" x 90" 4" x 132" 4" x 168" 6" x 48" SE 1 /4" x 18" 1 /4" x 24" 1 /2" x 18" 1 /2" x 24" 3 /4" x 18" 31/2" x 151/2" 1 Belts/Case 20 20 20 20 20 20 10 10 10 10 10 10 10 10 5 10 10 10 10 10 10 10 5 10 10 10 5 5 5 A CRS 048011-13290 048011-13132 048011-05019 20 20 20 20 20 10 048011-18495 048011-18496 048011-18087 048011-18088 048011-19697 048011-18089 048011-08858 048011-05741 048011-13639 048011-14278 048011-08887 A MED 048011-14276 048011-13131 048011-17515 048011-08857 048011-03998 048011-15899 048011-14398 048011-08898 048011-04189 A VFN 048011-13287 048011-19688 048011-08856 048011-04299 048011-14543 048011-17517 048011-08920 048011-04190 S SFN T 048011-08855 048011-17516 048011-15898 048011-08889 048011-05020 048011-05021 048011-05022 048011-05820 048011-14284 048011-08880 048011-05023 048011-05016 048011-08905 048011-08915 048011-08916 048011-00580 048011-03999 048011-00581 048011-05227 048011-05783 048011-14285 048011-08906 048011-00583 048011-14548 048011-00568 048011-05228 048011-00585 048011-04295 048011-08922 048011-00579 048011-04297 048011-09650 048011-14550 048011-04298 048011-04289 048011-05643 048011-08893 048011-05644 048011-15879 048011-05018 048011-00570 048011-00589 048011-00590 048011-18480 048011-18479 048011-18478 40 048011-04281 048011-04283 048011-14121 Introductory Packs Convenient introductory packs of Scotch-Brite surface conditioning and 3M coated abrasive belts. Products 518S 524S Product 518S 524S Contents 777S Regalite Polycut RB Cloth Belts 1/2" x 18" 2 ea. 60YF 2 ea. 80YF 241S Three-M-ite RB Cloth Belt 1/2" x 18" 2 ea. 120XE Surface Conditioning Belts 1/2" x 18" 1 ea. A VFN 1 ea. A MED 1 ea. A CRS 777S Regalite Polycut RB Cloth Belts 1/2" x 24" 2 ea. 60YF 2 ea. 80YF 2 ea. 120YF Surface Conditioning Belts 1/2" x 24" 1 ea. A VFN 1 ea. A MED 1 ea. A CRS Packs/Case UPC No. 5 051144-82897 5 051144-82898 83 41 TM Scotch-Brite Wheels Scotch-Brite EXL wheels are unmatched in production and maintenance operations. Use them on portable power tools, bench motors, floor lathes and automatic or semi-automatic equipment to clean, deburr, blend, finish or polish all types of metals, composites or plastics. An Extensive Range of Applications EXL wheels can be used on many types of metal to create a uniform, burr-free surface. Deburring. . . . . . . . . . . . Stamped parts (ferrous, non. . . . . . . . . . . . . . . . . . . . . ferrous, special metals); aircraft . . . . . . . . . . . . . . . . . . . . . components; surgical instruments; . . . . . . . . . . . . . . . . . . . . . aluminum extrusions; machined . . . . . . . . . . . . . . . . . . . . . metal components. Edge Radiusing . . . . . . . Formed wire; cutlery; aluminum . . . . . . . . . . . . . . . . . . . . . extrusions; machined parts; turbine . . . . . . . . . . . . . . . . . . . . . blades. Blending & Finishing . . Contours; grindlines; brazed . . . . . . . . . . . . . . . . . . . . . surfaces; airfoils of turbine blades; . . . . . . . . . . . . . . . . . . . . . compressor shafts; control . . . . . . . . . . . . . . . . . . . . . panels; nameplates. Polishing . . . . . . . . . . . . . Gun barrels, valve spools; . . . . . . . . . . . . . . . . . . . . . machined shafts; golf club . . . . . . . . . . . . . . . . . . . . . heads; other machined . . . . . . . . . . . . . . . . . . . . . parts prior to plating or other . . . . . . . . . . . . . . . . . . . . . subsequent operations. 84 Technical Information Maximum Operating Speed: Wheels must be operated at or below specified maximum operating speeds (M.O.S.). Replace these conventional products: * * * * * * Steel wool Hand files Carbide burrs Handknives and scrapers Sand blasting Wire brushes Application Decorative Finishing Composite/Wood Sanding Cleaning and Conditioning Prepolishing Oxide Removal Deburring Blending/Polishing Cutdown Prior to Buffing * Tampico and bristle brushes * Buffs and compounds * Rubber bonded wheels * Set-up wheels Recommended SFPM 500-3,000 SFPM 1,200-2,700 SFPM 2,000-5,000 SFPM 2,000-7,000 SFPM 4,500-6,500 SFPM 5,000-6,500 SFPM 6,000-8,000 SFPM 7,000-8,500 SFPM 85 SFPM = Surface Feet Per Minute 42 ing that causes discoloration and warping of thin and delicate materials. Long life saves money Extensive customer tests show that EXL wheels last much longer than other non-woven products while maintaining consistent performance and uniform wheel wear. More production parts per wheel means money saved. Clean and safe Nuisance dust from expended abrasive is greatly reduced compared to other types of non-woven wheels. And, there are no flying wires to endanger operators as with wire wheels. New EX2 and EX3 Deburring and Finishing Wheels can provide additional value in many applications. Ask your 3M sales representative or distributor for additional information. Scotch-Brite EXL Deburring Wheels TM Available with either silicon carbide or aluminum oxide minerals, EXL wheels help manufacturers of high-tolerance parts meet increasingly stringent product quality and production efficiency requirements. Aggressive and smooth running EXL wheels run smoothly providing greater operator comfort, safety and control...especially beneficial when working with valuable parts. Cool operation protects delicate parts The open web construction of EXL wheels allows air to circulate across the work surface. This helps prevent overheat- 86 Size 6" x 1/2" x 1" 6" x 1" x 1" 6" x 11/2" x 1" 6" x 2" x 1" 8" x 3/8" x 3" 8" x 1/2" x 3" 8" x 1" x 3" 8" x 2" x 3" Wheels/ Case 4 3 2 2 4 4 3 2 Max. Operating RPMs 6,000 6,000 6,000 6,000 4,500 4,500 4,500 4,500 Density/Mineral Type/Grade/UPC No. 8A MED 048011-13616 048011-13617 048011-18186 048011-13618 048011-17459 048011-13619 048011-13620 Accessories: Use with 3M Flange Adaptors No.3 or 5 or 3M Flanges No. 355 or 356. See pg. 47. 43 8S MED 048011-18277 048011-18278 8S FIN 048011-09548 048011-09549 9S FIN 048011-05790 048011-05132 048011-05133 048011-18279 048011-14791 048011-14629 048011-09551 048011-09552 048011-05791 048011-05135 048011-05136 Scotch-Brite EXL Unitized Deburring Wheels TM Applications: * Scotch-Brite EXL unitized wheels are excellent for deburring and polishing titanium, special alloys, composites and plastics. They are specially designed to minimize heat buildup on the work surface. * Fine finishes on precision tooled pieces. * Aerospace, automotive, electronics and medical instrument manufacturers. * Cool Running--Operators can apply more pressure to these wheels because they are less sensitive to heat buildup at the work surface. * Safe & Clean--Synthetic fiber and resin construction eliminate danger of loose flying wires commonly associated with wire wheels. And, they are cleaner to use than buffs and compounds. * Choose from a wide range of densities and grades for use on a variety of jobs from deburring precision threads to polishing welds. Size Wheels/ Dia.xWxAH Case 1 /2" x 1/8" x 1/8" 120 1" x 1/8" x 1/8" 100 1" x 1/4" x 1/8" 100 1" x 1" x 3/16" 50 1" x 1" x 3/16" 50 87 Wheel Color Lettering 2 S FIN Gray Purple * 2 S VFN Gray Maroon 2 A MED Gray Black * 3 S FIN Gray Pink 4 A FIN Tan Blue 4 S FIN Gray Green 6 A FIN Tan Blue 6 S FIN Gray Green 6 A MED Tan Red 8 A MED Tan Orange 8 A CRS Tan Orange * 8 A XCRS Brown Green Accessories: Use with 3M mandrels. See pg. 48. *Kut items UPC No. * (Max. Operating RPMs) 2A MED 2S FIN 4A FIN 15527 (25,100) 2" x 1/4" x 1/8" 60 2" x 1/4" x 3/16" 60 2" x 1/4" x 1/4" 60 2" x 1/2" x 1/4" 30 3" x 1/8" x 1/4" 40 3" x 1/4" x 1/4" 40 3" x 1/4" x 3/8" 40 3" x 1/2" x 1/4" 20 3" x 1/2" x 3/8" 20 3" x 3/4" x 1/4" 10 3" x 1" x 1/8" 15864 (35,100) 8A CRS 15518 (35,100) 15516 (35,100) 13713 (30,100) 14063 (35,100) 15515 (30,100) 13753 (35,100) 13752 (35,100) 13714 (20,100) 14746 (20,100) 11/2" x 1/4" x 3/16" 80 60 8A MED 15859 (35,100) 80 2" x 1/8" x 3/16" 6S FIN 13734 (30,100) 11/2" x 1/8" x 3/16" 80 11/2" x 1/4" x 1/8" 6A MED 15519 (40,100) 15517 (35,100) 15512 (22,100) 15529 (16.100) 15531 (12,100) 16054 (12,100) 15532 (10,000) 15511 (22,100) 13736 (16,100) 15513 (16,100) 13932 (16,100) 13715 (16,100) 13716 (12,100) 14750 (12,100) 13717 (10,000) 13755 (22,100) 14751 18,100 13718 (10,000) 24358 (9000) 44 14067 (18,100) 15118 (18,100) 14752 (18,000) 15462 (18,100) 13764 (18,100) 14753 (18,100) 13763 (18,100) 13766 (18,100) 13767 (15,100)* Scotch-Brite EXL Unitized Wheels (Continued) TM Size Wheels/ Dia.xWxAH Case 4" x 1/4" x 1/4" 20 UPC No. * (Max. Operating RPMs) 2A MED 2S FIN 4A FIN 6A MED 6S FIN 8A MED 13739 (8,500) 6" x 1/4" x 1/2" 8 17498 13741 (4,500) (5,000) 6" x 1/2" x 1/2" 4 15534 13719 (4,500) (5,000) 6" x 1/2" x 5/8" 4 15831 (5,000) 6" x 1/2" x 1" 4 16545 14379 (4,500) (5,000) 6" x 1" x 1/2" 2 13742 (5,000) 6" x 1" x 1" 2 16544 13743 13788 (4,500) (5,000) (7500) 8" x 1/4" x 1/2" 8 15827 (4,000) 8" x 1/2" x 1/2" 4 15844 (4,000) 8" x 1/2" x 3/4" 4 15824 (4,000) 8" x 1/2" x 1" 4 16546 15823 (3,500) (4,000) * Add Prefix 048011- to UPC No. when ordering. Stock sizes by Grade. Other grades and sizes available. 8A CRS 13777 (7,500) Clean and Strip Cup Wheels Cup Wheels will fit a wide range of right angle grinders (3" and 4" diameter sizes have the convenient spin-on feature) with a broad selection of thread sizes. Applications: Aggressive, long lasting, cleaning and coating removal and other tough MRO uses. 88 No.Size Max. Oper. Dia.xThd. Wheels/Case RPMs 3" x 3/8" - 24 5 18,100 4" x 38" - 24 4 12,100 4" x 1/2" - 13 4 12,100 4" x 5/8" - 11 4 12,100 4" x M10 - 1.25 4 12,100 4" x M10 - 1.5 4 12,100 4" x M14 4 12,100 6" x 7/8" * * 2 7,000 Accessories: Use 6" diameter cup wheel with the 3M Cup Wheel Back-up Pad No. 955. The lower of the wheel or holder MOS rating must always be used. 45 89 Mineral Type/Grade UPC S XCS 048011-04151 048011-04217 048011-04152 048011-04153 048011-05519 048011-04218 048011-04154 048011-04237 Multi-Finishing Wheels The wheel for producing uniform grain finishes on stainless steel and other metals Multi-Finishing wheels are highly conformable, soft wheels that create uniform and attractive final finishes on ferrous and non-ferrous metals. They are tough enough to finish edges and welds and soft enough to final finish large, flat surfaces. 90 Stock Sizes * Size Dia.xWxAH 6" x 1" x 1" 6" x 2" x 1" 6" x 3" x 1" 6" x 4" x 1" 8" x 1" x 3" 8" x 2" x 3" Wheels/ Case 3 2 1 1 3 2 Density/Mineral Type/Grade UPC No. 2S CRS 048011-13170-2 048011-13176-4 048011-13179-5 2S MED 048011-13171-9 048011-13177-1 048011-13180-1 048011-13358-4 048011-13183-2 048011-13186-3 048011-13182-5 048011-13185-6 2S FIN 048011-13172-6 048011-13178-8 048011-13181-8 048011-13184-9 048011-13187-0 Cut & Polish Wheels Heavy duty wheels for aggressive blending and finishing Long-lasting and aggressive, Cut & Polish wheels perform well on all kinds of tough blending and finishing jobs. They produce uniform results quickly and easily and are often used to replace conventional abrasives such as rubber bonded wheels, set-up wheels, abrasive flap wheels and belts. 91 Stock Sizes * Size Dia.xWxAH 6" x 1/2" x 1" 6" x 1" x 1" 6" x 2" x 1" 8" x 1/2" x 3" 8" x 1" x 3" 8" x 2" x 3" Wheels/ Case 4 3 2 4 3 2 Density/Mineral Type/Grade UPC No. 7A CRS 7A MED 7A FIN 7A VFIN 048011-03263-4 048011-03262-7 048011-03272-6 048011-05183-3 048011-03276-4 048011-03281-8 048011-03270-2 048011-03269-6 048011-03282-5 * Additional sizes available as stock or made-to-order. 46 048011-03275-7 5A FIN 048011-05182-6 048011-02960-3 048011-02972-6 048011-02965-8 048011-02967-2 Accessories - Scotch-BriteTM Wheels 3M Flange Adaptor No. 3 3M Flange No. 356 Used to reduce 1" internal diameter core size, flange size or wheel size to fit shafts smaller than 1" diameter. This item is a stamped and formed sheet metal product. Used to reduce wheel cores and internal diameters to fit smaller shaft sizes. This product spans a range of sizes. It is manufactured of spun aluminum, has a taper locking feature to automatically center the flange inside the core of the wheel. TM Product 3 3 3 3 3 Size 1" x 3/8" 1" x 1/2" 1" x 5/8" 1" x 3/4" 1" x 7/8" Sets/Case 1 1 1 1 1 TM UPC No. 048011-09151 048011-09152 048011-09153 048011-09154 048011-09155 Product 3M Flange Adaptor No. 5 TM 356 356 356 356 356 356 356 Telescoping wheel adaptors 1" and 1/2" wide to reduce 1" wheel center holes to fit 1 /2", 5/8", 3/4", or 7/8" shafts. Use with a set of flat or cupped washers 1/3 the diameter of the wheel for side support. Size Dia.xAH 3" x 1/2" 3" x 5/8" 3" x 3/4" 3" x 7/8" 3" x 1" 3" x11/4" 3" x 11/2" 94 Sets/Case UPC No. 1 1 1 1 1 1 1 048011-03896 048011-03897 048011-03898 048011-18407 048011-03899 048011-03900 048011-04307 92 3M Flange No. 365 TM Product 5 5 Size 1" x 1/2" x 1/2" 1" x 1" x 1/2" Sets/Case 1 1 UPC No. 048011-16859 048011-16860 This flange was specifically designed for use with wheels that are 12" wide and have a 3" diameter center hole. (For wheels wider than 12", use 3M Flange no. 356). The flange no. 365 is used to reduce the wheel core internal diameter to fit smaller shaft sizes. This product spans a range of sizes. It is made of spun aluminum and has a taper locking feature to automatically center the flange inside the core of the wheel. 3M Recessed Flange No. 355 TM Used to reduce 3" internal diameter core size to fit shafts smaller than 3" diameter when a protruding locking nut is not desirable. A recessed flange is mounted on the outboard side of the brush or wheel and the locking nut may be installed within the area of the recess. A stamped and formed sheet metal product. Product 355 Recessed 355 Recessed Size Dia.xAH 3" x 1/2" 3" x 5/8" Sets/Case UPC No. 1 1 048011-03885 048011-03884 Product 93 365 365 365 365 365 365 Size Dia.xAH 3" x 1/2" 3" x 5/8" 3" x 3/4" 3" x 7/8" 3" x 1" 3" x 11/4" Sets/Case UPC No. 1 1 1 1 1 1 048011-18410 048011-18411 048011-18412 048011-18413 048011-18414 048011-18415 3M Spindle Extender Kit No. 300 TM For use on flexible shafts with 6" and 8" diameter Scotch-Brite wheels through 4" in width. Consists of (1) driving spindle 5 /8" - 11 female thread (1) washer with 5/8" arbor hole (2) 1" x 5/8" bushings (1) flange adaptor 5/8" (1) spanner nut 1/2" - 13 female threaded shank available by special request (051144-05622). Product 300 47 Kits/Case 1 UPC No. 048011-04019 95 3M Mandrels TM Mandrels are corrosion protected and machined to industrial standards of thread size and shaft diameters. They are designed for use with Scotch-Brite Unitized Wheels. Mandrels are furnished complete with washers to fit available wheel sizes. Product 936 (Plastic) 946 (Steel) 990 Use With Shank Wash. Length Size Diam. Unitized Wheels 21/16" 1" x 1" x 3/16" Unitized Wheels 13/4" 1" x 1" x 3/16" Unitized Wheels 13/4" 2"-3" dia. x 1/8" - 1/2" wd* Max. Oper. RPM /4" N/A 22,200 /4" 1 /2" Hex Nut Dia. None 35,200 1 1 /4" 1 25,200 w/2" dia. x 3/8" CH 96 Mandrel No. 931, 932, 933 991 Unitized Wheels 17/8" 2"-3" dia. x 1/2" - 1" wd** x 3/8" CH 1 992 Unitized Wheels 11/2" 1"-11/2" dia. x 1/8" - 1/2" wd* x 3/16" CH 1 Unitized Wheels 11/2" 1"-11/2" dia. x 1/8" - 1/2" wd* x 3/16" CH 1 Unitized Wheels 111/16" /2"-3/4" dia. x 1/8"-1/4" wd x 1/8" CH Unitized Wheels 111/16" 1 /2"-3/4" dia. x 1/8"-1/4" wd x 1/8" CH 1 97 /4" Mandrel No. 934 dia. 994 98 Mandrel No. 936 and 946 99 Mandrel No. 990 996 /8" /4" /8" 1 998 /4" 1 22,200 w/21/2" dia. 18,200 w/3" dia. None 25,200 w/2" dia. 22,200 w/21/2"dia. 18,200 w/3" dia. None 35,200 w/1" dia. 30,200 w/11/2" None 35,200 w/1" dia. 30,200 w/11/2" dia. None 40,200 w/1/2" and 3 /4" dia. None 40,200 w/1/2" and 3 /4" dia. * These mandrels come with two caps, one silver for 1/8" and 1/4" wide wheels and one black for 3/8" and 1/2" wide wheels. 101 102 Mandrel No. 992 and 994 Mandrel No. 991 103 Mandrel No. 996 and 998 Product 931 932 933 934 Shank Wash. Length Size Diam. 1 1 11/2" /8" /2" Use With Unitized Wheels 1", 11/2" dia. x 1/4" wd x 1/8" CH Unitized Wheels 2" 11/2", 2" dia. x 1/4", 1 1 /2" wd x /4" CH Note: 5/16" CH is recommended for wheels 6 density or harder Unitized Wheels 2" 2", 21/2", 3" dia. x 1/4", 1 3 /2", /4", 1" wd x 1 /4" CH Note: 5/16" CH is recommended for wheels 6 density or harder Unitized Wheels 31/16" 3"- 6" dia. x 1/4", 1/2" 3 /4", 1" wd x 1/2" CH /4" Max. Oper. RPM 13,000 /16" 20,000 /4" 1" 14,000 /4" 21/2" 12,000 w/3" dia. 8,500 w/4" dia. 6,000 w/6" dia. 1 1 1 13 48 Product 931 932 933 934 936 944 946 990 990 Bulk 991 992 994 996 998 Mandrels/Case 5 5 5 1 5 1 5 5 60 5 5 5 5 5 UPC No. 048011-13966 048011-13967 048011-13968 048011-04021 048011-04018 048011-13928 048011-05726 048011-15012 048011-15015 048011-16847 048011-15013 048011-16848 048011-15014 048011-16849 Roloc + Holders & Button Combination Packs TM These combination packs contain one Roloc + Holder No.1 and one Roloc + Button No. 6 or 7. Product Specifications Product No. 1 and No. 6 No. 1 and No. 7 Product No. 1 and No. 6 No. 1 and No. 7 Use With Unitized Wheels 3" Diameter and smaller x 1/8" wide x 3/8" CH Unitized Wheels 3" Diameter and smaller x 1/4" wide x 3/8" CH Sets/Case UPC No. 5 048011-14916 5 048011-14915 Introductory Packs A convenient introductory pack of assorted EXL unitized wheels and/or EXL Deburring Wheels lets you decide which product is right for you. Product 990S 992S EXL Product 990S 992S EXL Contents EXL Unitized Wheels 2 ea. 2S FIN 1" x 1" x 3/16" 2 ea. 2A MED 1" x 1" x 3/16" 2 ea. 6A MED 1" x 1" x 3/16" 2 ea. 8A CRS 1" x 1" x 3/16" 1 ea. 2S FIN 3" x 1/4" x 3/8" 1 ea. 2A MED 3" x 1/4" x 3/8" 1 ea. 6A MED 3" x 1/4" x 3/8" 1 ea. 8A CRS 3" x 1/4" x 3/8" Mandrels 1 ea. 936 1 ea. 990 with Silver cap EXL Unitized Wheels 4 ea. 6A MED 1/2" x 1/8" x 1/8" 4 ea. 8A CRS 1/2" x 1/8" x 1/8" 2 ea. 2S FIN 1" x 1/4" x 1/8" 2 ea. 6A MED 1" x 1/8" x 1/8" 2 ea. 8A CRS 1" x 1/8" x 1/8" 2 ea. 2S FIN 11/2" x 1/4" x 3/16" 2 ea. 6A MED 11/2" x 1/8" x 3/16" 2 ea. 8A CRS 11/2" x 1/8" x 3/16" 2 ea. 2S FIN 2" x 1/4" x 3/16" 2 ea. 6A MED 2" x 1/8" x 3/16" 2 ea. 8A CRS 2" x 1/8" x 3/16" Mandrels 1 ea. 992 with short cap 1 ea. 994 with short cap 1 ea. 996 1 ea. 998 EXL Deburring Wheel 1 ea. 8A MED 6" x 1" x 1" EXL Unitized Wheel 1 ea. 2A MED 6" x 1/2" x 1" Flange Adaptor No. 5 1 ea. 1" x 1/2" x 1/2" 1 ea. 1" x 1" x 1/2" Packs/Case 5 5 5 UPC No. 048011-18245 048011-15509 048011-16405 49 TM PG Wheels 3M PG wheels deliver a consistent finish and a uniform rate of cut. They are non-loading, non-glazing and nondulling. As they are used the flaps wear away to continually expose new abrasive. PG wheels can be shaped to fit any desired contour, even a compound radius. There is a full line of accessories that complements the PG wheel line to give you the best possible finish in the least time. TM 3M 747D Regalite Polycut Resin Bond Cloth X Wt. TM TM TM Premium aluminum oxide mineral and Cubitron ceramic aluminum oxide coated on a cloth backing. Incorporates a grinding aid (excellent for stainless). T83 - 104 /4" straight 1 105 Siz Size Min. Max. Oper. Dia. x W x Shk. Prod. I.D. Pkg./Case RPMs T83 1" x 1" x 1/4" 747D 10 25,000 11/2" x 1" x 1/4" 747D 10 22,000 2" x 1" x 1/4" 747D 10 20,000 21/2" x 1" x 1/4" 747D 10 18,000 3" x 1" x 1/4" 747D 10 18,000 * Add Prefix 051144- to UPC No. when ordering. T84 - 40 60 80 80761 80762 80763 80764 80650 80757 80758 80759 80760 80651 Grade and UPC No.* 100 120 150 180 240 320 80753 80754 80755 80756 80652 /4"x 20 threaded 1 106 Size Min. Max. Oper. Dia. x W x Thd. Prod. I.D. Pkg./Case RPMs T84 2" x 1/2" x 1/4" 747D 10 20,000 2" x 1" x 1/4" 747D 10 20,000 21/2" x 1" x 1/4" 747D 10 18,000 3" x 1" x 1/4" 747D 10 18,000 * Add Prefix 051144- to UPC No. when ordering. ** Add Prefix 051111- to UPC No. when ordering. 40 60 49628** 83271 83270 83269 50 80 Grade and UPC No.* 100 120 150 49631** 83268 49632** 83267 83266 83265 83264 83263 180 240 320 3M 244E Three-M-ite RB Cloth XE Wt. 3M 241E Three-M-ite RB Cloth XE Wt. 3M 241D Three-M-ite RB Cloth X Wt. TM TM TM TM TM TM Our standard aluminum oxide PG wheels with durable rayon or cotton drills backing. T83 - /4" straight 1 107 Size Min. Max. Oper. Dia. x W x Shk. Prod. I.D. Pkg./Case RPMs 1" x 1/2" x 1/4" 244E 10 25,000 241E 10 1" x 1" x 1/4" 244E 10 25,000 241E 10 11/2" x 1/2" x 1/4" 244E 10 22,000 241E 10 11/2" x 1" x 1/4" 244E 10 22,000 241E 10 2" x 1/2" x 1/4" 244E 10 20,000 241E 10 2" x 1" x 1/4" 244E 10 20,000 241E 10 2" x 11/2" x 1/4" 244E 10 20,000 21/2" x 1" x 1/4" 244E 10 18,000 21/2" x 11/2" x 1/4" 244E 10 18,000 3" x 1/2" x 1/4" 244E 10 18,000 241E 10 3" x 1" x 1/4" 241D 10 18,000 244E 10 241E 10 3" x 2" x 1/4" 244E 10 18,000 * Add Prefix 051144- to UPC No. when ordering. ** Add Prefix 051111- to UPC No. when ordering. Kut stock items 40 Grade and UPC No.* 60 80 100 120 150 96800 96801 96802 180 240 96803 96804 320 96805 35475 35476 35477 96806 96808 96809 96810 96811 96812 35472 35473 49636** 96815 14611 49633** 96820 96821 96807 96813 96816 96818 96822 14623 14624 14625 96825 96826 49626** 14640 96829 96830 14643 14644 96827 14641 96831 14645 96823 96824 96828 96832 96833 96834 96835 14655 14656 14657 49635** 49630** 49634** 96836 96837 51 3M 244E Three-M-ite RB Cloth XE Wt. 3M 241E Three-M-ite RB Cloth XE Wt. 3M 241D Three-M-ite RB Cloth X Wt. TM TM TM TM TM TM Our standard aluminum oxide PG wheels with durable rayon or cotton drills backing. T84 - /4" x 20 threaded 1 108 Size Dia. x W x Thd. 1" x 5/8" x 1/4" - 20 Prod. Min. Max. Oper. I.D. Pkg./Case RPMs 241D 10 25,000 244E 10 241E 10 1" x 1" x 1/4" - 20 241D 10 25,000 244E 10 241E 10 11/2" x 1" x 1/4" - 20 244E 10 22,000 2" x 1/2" x 1/4" - 20 241D 10 20,000 244E 10 241E 10 2" x 1" x 1/4" - 20 241D 10 20,000 244E 10 241E 10 2" x 11/2" x 1/4" - 20 244E 10 20,000 21/2" x 1/2" x 1/4" - 20 244E 10 18,000 241E 10 21/2" x 1" x 1/4" - 20 244E 10 18,000 241E 10 3" x 1/2" x 1/4" - 20 244E 10 18,000 241E 10 3" x 1" x 1/4" - 20 241D 10 18,000 244E 10 241E 10 * Add Prefix 051144- to UPC No. when ordering. * Add Prefix 051111- to UPC No. when ordering. Kut stock items 40 96841 60 80 Grade and UPC No.* 100 120 150 96842 96843 96844 96845 180 240 320 96846 96847 96848 96849 35467 35468 96850 35469 96851 96852 96853 49627** 35465 49700** 96860 96861 96862 96863 96864 96865 96866 14575 14576 14577 96867 96869 96870 96873 96874 96871 96875 96872 96876 96877 14591 14592 14593 96879 96880 96882 96883 96884 96885 96886 96868 96878 96881 96887 96888 14607 14608 96889 14609 96890 96891 52 3M 741A Regalite RB Cloth X Wt. TM TM Combines the characteristics of aluminum oxide with 3M's CubitronTM Mineral on a strong X wt. backing. The 3M 741A product is applicable for use on both ferrous and non-ferrous metals. Size Prod. Min. Max. Oper. Dia. x W x AH I.D. Pkg./Case RPMs 40 6" x 1" x 1" 741A 1/5 6,100 6" x 11/2" x 1" 741A 1/5 5,600 6" x 2" x 1" 741A 1/5 5,200 * Add Prefix 051144- to UPC No. when ordering. Grade and UPC No.* 50 60 80 100 120 150 82770 81986 81984 81987 81985 81982 81988 81989 81983 180 220 240 320 3M 244E Three-M-ite RB Cloth XE Wt. 3M 241D Three-M-ite RB Cloth X Wt. 3M 241E Three-M-ite RB Cloth XE Wt. TM TM TM TM TM TM Our standard aluminum oxide PG wheels with durable rayon or cotton drills backings. 109 Size Prod. Min. Max. Oper. Dia. x W x AH I.D. Pkg./Case RPMs 40 T80 31/2" x 1" x 5/8" 244E 1/10 10,000 31/2" x 11/2" x 5/8" 241D 1/10 9,500 96900 244E 1/10 31/2" x 2" x 5/8" 241D 1/10 9,000 96902 244E 1/10 4" x 1" x 5/8" 241D 1/10 9,000 96907 244E 1/10 4" x 11/2" x 5/8" 241D 1/10 8,500 96910 244E 1/10 4" x 2" x 5/8" 244E 1/10 7,500 4" x 4" x 3/4" 244E 1/10 7,500 1/10 6,800 96918 5" x 11/2" x 5/8" 241D 244E 1/10 Medium 6" x 1/2" x 1" 244E 1/5 6,400 6" x 1" x 1" 241D 1/5 6,100 96929 244E 1/5 241E 1/5 1/5 5,600 96931 6" x 11/2" x 1" 241D 244E 1/5 241E 1/5 6" x 2" x 1" 241D 1/5 5,200 96934 244E 1/5 6" x 21/2" x 1" 244E 1/5 5,200 6" x 3" x 1" 244E 1/5 4,500 8" x 1" x 1" 244E 1/3 4,600 8" x 2" x 1" 244E 1/3 3,900 10" x 2" x 13/4" 244E 1/2 3,900 14" x 2" x 11/4" 241D 1/1 3,000 * Add Prefix 051144- to UPC No. when ordering. ** Add Prefix 051119- to UPC No. when ordering. Kut stock items 50 60 Grade and UPC No.* 80 100 120 150 180 220 240 320 96895 96896 96897 96898 96899 84098 96901 84100 96903 96904 96905 96906 84097 96908 84099 96909 96911 96912 96915 84103 84102 96913 96916 96917 96919 96920 96921 96922 96914 96923 96924 96925 96926 96927 96928 35114 35113 35112 35111 35109 35108 35105 96930 35103 35102 35100 35098 35095 55816** 96932 96933 35089 35088 35086 35330 35084 35083 96935 35070 35063 35049 35048 35014 96936 35032 53 35081 96937 Accessories - PG Wheels 3M PG Wheel Adaptor No. 1 TM TM For 2" thru 3" Diameter Wheels. Adaptor includes one female threaded shaft, 5 screws in varying lengths to accommodate wheels from 1/2" to 2" wide and one hex wrench. UPC No. 051144-45043 3M PG Wheel Adaptor No. 2 TM TM For 31/2" or 4" Diameter Wheels. Adaptor includes spindle extension 2 screws and one sleeve to accommodate wheels 1", 11/2" and 2" wide. Available spindle diameters and thread counts are 5/8 -11, 1/2 -13, or 1/4" shank. Size 5 /8"-11 Thread 1 /4" Shank UPC No. 051144-45040 051144-45041 3M Wheel Adaptor Kit No. 3 TM Two arbor hole (plug type) adaptors for 5" thru 8" diameter PG Wheels. 1" O.D. x various ID's. Fits Arbor Size 7 /8" 3 /4" 5 /8" 1 /2" UPC No. 051144-45032 051144-45033 051144-45034 051144-45035 3M Wheel Adaptor No. 81A TM For use with Type 84 PG Wheels. This adaptor has a 1/4" diameter shank and a 1/4 -20 thread female acceptor end. UPC No. 051144-45081 3M Flange Adaptor Kit No. 3 TM Adaptor includes spindle extension for use on short spindles, four spacer bushings, 1/2" width spacer bushing, an arbor hole adaptor (plug type) and a cap nut to bush the flanges and provide the recessed hub. For all wheel widths up to and including 3", in 5" thru 8" diameters. Size 5 /8"-11 Thread UPC No. 051144-45038 54 Green Corps Cut-Off Wheels TM Green Corps Cut-Off Wheels are designed to provide high cut rates and long life on most all materials including fiberglass, stainless steel, mild steel and aerospace alloys. Green Corps Wheels incorporate 3M's patented Cubitron ceramic abrasive grain technology and are ideal for use on a wide variety of utility type cut-off tools. Read all warnings supplied with wheels. Do not use on tools without guards. TM Size 2" x 1/16" x 1/4" 3" x 1/32" x 1/4" 3" x 1/32" x 3/8" 3" x 1/16" x 3/8" 4" x 1/32" x 3/8" 4" x 1/16" x 3/8" Pkg. Min./Unit bulk 50 wheels/box bulk 50 wheels/box bulk 50 wheels/box bulk 50 wheels/box bulk 50 wheels/box bulk 50 wheels/box Max. RPMs 42,000 051144-83487 35,000 051144-82238 35,000 051131-01985 28,000 051131-01986 26,250 051131-01994 21,000 051144-83488 UPC No. 3M Green Corps Reinforced Weld Grinding Wheel TM Read all warnings supplied with wheels. Do not use on tools without guards. Size 3" x 3/16" x 3/8" Pkg. Min./Unit 5 pack/ 5 packs case Max. RPMs 20,375 UPC No. 051131-01991 General Purpose Cut-Off Wheels Size 3" x 1/32" x 3/8" 3" x 1/16" x 3/8" Wheels per case 50 wheels per case 50 wheels per case Max. RPMs 25,000 051131-01987 25,000 051131-01988 UPC No. 55 110 Bench Area Products When portable power tools are used in bench area operations, 3M helps keep things moving with a full line of money-saving, quality boosting coated abrasives and surface conditioning products. Each is designed to deliver outstanding results and to speed up time-consuming jobs such as grinding, deburring, blending, cleaning, and finishing of flat and irregular surfaces and hard-to-reach areas. 112 Scotch-Brite spindle mounted ganged discs provide a high degree of conformability. 119 Scotch-Brite high performance flap brushes (CFFB) provide consistent finishes. Shown here with the 3M Roloc + holding system. 113 Scotch-Brite stars mount singly or in combination for efficient I.D. cleaning and polishing operations. A complete grinding and surface conditioning system Used individually or as part of a complete grinding and surface conditioning sequence, each 3M product maximizes results in your bench area operations. Often, the combination of 3M coated abrasives and Scotch-Brite surface conditioning products can eliminate the need for intermediate grinding or blending steps. 56 CSD1-R, CSD1-S, CSD2-R, CSD2-S Either one Clean and Strip Disc (CSD1) or two Clean and Strip Discs (CSD2) mounted to a shaft. These products are excellent for heavy duty cleaning of rusts, oxides, paints, and coatings. Cleans much faster and safer than wire brushes. Color: Black 114 Size 4" x 1/2" 4" x 1" 4" x 1/2" x 1/4" 4" x 1" x 1/4" Prod. I.D. CSD1-R CSD2-R CSD1-S CSD2-S Brushes/ Case 10 10 10 10 Max. Oper. RPMs 8,000 8,000 8,000 8,000 115 Mineral Type/Grade UPC No. S XCS 048011-14592 048011-14784 048011-14579 048011-14780 Accessories: Roloc+ Holder No. 2 for CSD1-R and CSD2-R. See pg. 60. HPCSD1-R, HPCSD1-S Clean and Strip web in convenient disc form. Used extensively in maintenance type applications for removing oxides, scale and rust as well as weld conditioning and cleaning. The modern efficient alternative to wire brushes and scrapers. A tough cleaning product. Provides much longer life than CSD1 products with slightly less conformability. 116 Color: Gray Size 3" x 1/2" 4" x 1/2" 3" x 1/2" x 1/4" 4" x 1/2" x 1/4" Prod. I.D. HPCSD1-R HPCSD1-R HPCSD1-S HPCSD1-S Discs/ Case 10 10 10 10 Max. Oper. RPMs 10,000 8,000 10,000 8,000 Mineral Type/Grade UPC No. S XCS 048011-14591 048011-14777 048011-14782 048011-14785 Accessories: Roloc+ Holder No. 2 for HPCSD1-R. See pg. 60. CPD5-R, CPD5-S Five discs of tough Cutting and Polishing Scotch-Brite Web ganged together on a shaft. Use for satin or antique finishing as well as light to medium duty cleaning applications. Color: Tan 117 Size 3" x 11/4" 4" x 11/4" 3" x 11/4" x 1/4" 4" x 11/4" x 1/4" Prod. I.D. CPD5-R CPD5-R CPD5-S CPD5-S Discs/ Unit 10 10 10 10 Max. Oper. RPMs 10,000 8,000 10,000 8,000 Accessories: Roloc+ Holder No. 2 for CPD5-R. See pg. 60. 57 Mineral Type/Grade UPC No. A MED 048011-14594 048011-14590 048011-14593 048011-14779 CPFB-R, CPFB-S Flaps of heavy duty Cutting and Polishing web. Will leave a uniform surface finish while removing handling marks and surface imperfections. A long-life flap brush. Color: Tan 118 Size 2" x 1" x 1/4" 3" x 13/8" 3" x 13/4" x 1/4" Discs/ Unit 25 10 10 Prod. I.D. CPFB-S CPFB-R CPFB-S Mineral Type/Grade UPC No. Max. Oper. RPMs 12,000 8,000 8,500 A MED 048011-16622 048011-14588 048011-05974 Accessories: Roloc+ Holder No. 2 for CPFB-R. See pg. 60. CFFB-R, CFFB-S Scotch-Brite high performance finishing web made into a flap brush. The high performance web outlasts conventional webs while giving a longer scratch pattern ideal for decorative finishing and light deburring applications. Color: Green 119 Size 3" x 13/8" 3" x 13/4" x 1/4" Prod. I.D. CFFB-R CFFB-S Brushes/ Case 10 10 Max. Oper. RPMs 7,500 8,500 Mineral Type/Grade UPC No. A CRS 048011-14587 048011-05975 S FIN 048011-14783 048011-14781 Accessories: Roloc+ Holder No. 2 for CFFB-R. See pg. 60. Stars Scotch-Brite Stars are the perfect choice for cleaning and polishing I.D. of pipe and tubing. Their unique shape allows the star tips to provide constant outward pressure on the walls of parts made of steel, aluminum or plastic so you can quickly get a smooth, consistent cleaning action. Scotch-Brite Stars are available in a variety of sizes and grades and are designed to work with the 3M Brand Mandrel No. 944. They can be used with power bench tools such as die grinders, straight-shaft grinders, or electric drills. TM Color: A VFN - Blue A CRS - Brown Size 11/2" 2" 3" 4" 41/2" Stars/ Unit 100 100 50 50 50 120 Mineral Type/Grade UPC No. Max. Oper. RPMs 24,000 24,000 18,000 18,000 18,000 A VFN 048011-13800 048011-13803 048011-13802 048011-13804 048011-13801 Accessories: Mandrel No. 944. See pg. 60. 58 A CRS 048011-13370 048011-13371 048011-13372 048011-13373 048011-13374 3M COMBI Wheels TM These unique wheels are a combination of aluminum oxide coated abrasive and Scotch-Brite Brand material. They are designed for a variety of surface finishing and blending operations on a large variety of workpieces. TM 3M COMBI-R TM (Roloc+ Shaft) TM 121 Size 21/2" x 11/4" Max. Oper. RPMs Wheels/Case 9,000 10 Prod. I.D. Combi-R Grade and UPC No. 80X 051144-80802 P120X 051144-80679 P180X 051144-80800 3M COMBI-S TM (Spindle Mount) 122 Size 3" x 13/4" x 1/4" Max. Oper. RPMs Wheels/Case 8,000 10 Prod. I.D. Combi-S Grade and UPC No. 80X 051144-80801 Roloc + Holder No. 1 TM Product I.D. Roloc+ Holder No. 1 Roloc+ Holder No. 1 Pkg. Min./Unit 5/cs 40/cs UPC No. 048011-15408 048011-14586 59 P120X 051144-80678 P180X 051144-80799 Accessories - Bench Area Roloc + Holder Introductory Pack These holders are made of a durable plastic for less critical grinding and surface conditioning applications. They are compatible with Roloc+ products. This convenient introductory deal is an easy and convenient way to try various sizes and grades. TM 123 Product 1 2 2 3 3 4 4 Max. Oper. Holders/ Dia. Use With RPMs Case UPC No. 1" COMBI-R's 25,000 5 048011-15408 11/2" ROLOC+ 25,000 5 048011-15409 Products 1 1 /2" ROLOC+ 25,000 40 048011-14585 Products 2" 2" diameter 25,000 5 048011-15410 Roloc Discs 2" 2" diameter 25,000 40 048011-14584 Roloc Discs 3" 3" diameter 25,000 5 048011-15411 Roloc Discs 3" 3" diameter 25,000 20 048011-14583 Roloc Discs 125 Product 944S 3M Mandrel No. 944 TM Product 944S 124 Use With Scotch-Brite Stars Product 944 Size 1 /4" shank with 1 /4"-20 external thread Mandrels/Case 1 Maximum Oper. RPMs 25,000 UPC No. 048011-13928 60 Contents Stars 2 ea. A VFN 11/2" 2 ea. A VFN 2" 2 ea. A VFN 3" 2 ea. A VFN 4" 2 ea. A CRS 11/2" 2 ea. A CRS 2" 2 ea. A CRS 3" 2 ea. A CRS 4" Mandrel 1 ea. 944 Packs/Case 5 UPC No. 048011-18255 Cartridge Rolls 3M manufactures cartridge rolls in a wide variety of shapes and sizes to let you get into all the hard-to-get-at areas on your workpieces. They are available in both straight and full taper shapes. See the accompanying tables for descriptions of the various constructions. We also offer a complete line of accessories for use with these cartridge rolls. 127 126 3M 747D Regalite Polycut Resin Bond Cloth X Wt. TM TM TM These premium constructed cartridge rolls utilize 3M's Cubitron & aluminum oxide minerals coated on an X-wt. cotton backing. An outstanding value for use on a variety of exotic and other metals. Size Prod. I.D. Regular 1 /4" dia. x 1" L x 1/8" CH 747D 3 /8" dia. x 1" L x 1/8" CH 747D 1 /2" dia. x 11/2" L x 1/8" CH 747D 5 /8" dia. x 1" L x 3/16" CH 747D 3 /4" dia. x 11/2" L x 1/8" CH 747D 3 /4" dia. x 11/2" L x 1/4" CH 747D Full Taper 1 /2" dia. x 11/2" L x 1/8" CH 747D 3 /4" dia. x 11/2" L x 1/8" CH 747D Maximum Operating RPMs: 1 /2" and smaller dia. - 24,000 5 /8 - 3/4" dia. - 16,000 1" dia. - 12,000 128 Full Taper Pkg. Min./Unit 60X 50/200 50/200 50/200 50/200 50/200 50/200 051144-80789 051144-80790 051144-98938 Regular Grade and UPC No. 80X 120X 051144-80793 051144-80794 051144-80796 051144-80791 051144-80792 051144-80797 051144-80798 50/200 50/200 051144-80786 61 051144-80787 051144-80785 051144-80788 3M 241D Three-M-ite Resin Bond Cloth TM TM X Wt. These resin bond cartridge rolls provide greater heat and moisture resistance than glue type products and will usually produce a higher rate of cut and longer life. Size Prod. Pkg. Dia x W x AH I.D. Min./Unit 36 40 Regular 3 /16" x 1" x 3/32" 241D 50/200 96939 1 /4" x 3/4" x 1/8" 241D 50/200 96948 1 /4" x 1" x 1/8" 241D 50/200 96957 1 /4" x 11/2" x 1/8" 241D 50/200 96966 1 /4" x 2" x 1/8" 241D 50/200 96976 5 /16" x 1" x 1/8" 241D 50/200 96985 5 /16" x 11/2" x 1/8" 241D 50/200 96995 3 /8" x 1" x 1/8" 241D 50/200 97004 3 /8" x 11/2" x 1/8" 241D 50/200 96938 97011 3 /8" x 2" x 1/8" 241D 50/200 97020 1 /2" x 3/4" x 1/8" 241D 50/200 97029 1 /2" x 1" x 1/8" 241D 50/200 97039 1 /2" x 1" x 3/16" 241D 50/200 97049 1 /2" x 11/2" x 1/8" 241D 50/200 97055 97056 1 /2" x 2" x 1/8" 241D 50/200 97063 1 /2" x 2" x 3/16" 241D 50/200 97073 5 /8" x 1" x 3/16" 241D 50/200 97096 5 /8" x 11/2" x 1/8" 241D 50/200 97104 5 /8" x 11/2" x 3/16" 241D 50/200 97113 5 /8" x 2" x 3/16" 241D 50/200 97123 3 /4" x 1" x 1/8" 241D 50/200 97133 3 /4" x 11/2" x 1/8" 241D 50/200 97151 3 /4" x 11/2" x 3/16" 241D 50/200 97159 97160 3 /4" x 11/2" x 1/4" 241D 50/200 97158 97141 3 /4" x 2" x 1/8" 241D 50/200 97176 3 /4" x 2" x 3/16" 241D 50/200 97185 97186 3 /4" x 2" x 1/4" 241D 50/200 97169 1" x 11/2" x 3/16" 241D 50/200 97206 97207 1" x 11/2" x 1/4" 241D 50/200 97196 97197 1" x 2" x 3/16" 241D 50/200 97228 97229 1" x 2" x 1/4" 241D 50/200 97217 97218 Full Taper 3 /8" x 1" x 1/8" 241D 50/200 3 /8" x 11/2" x 1/8" 241D 50/200 1 /2" x 1" x 1/8" 241D 50/200 97255 1 /2" x 11/2" x 1/8" 241D 50/200 97263 1 /2" x 2" x 1/8" 241D 50/200 5 /8" x 1" x 1/8" 241D 50/200 5 /8" x 11/2" x 1/8" 241D 50/200 3 /4" x 1" x 3/16" 241D 50/200 97297 97298 3 /4" x 11/2" x 1/8" 241D 50/200 97318 97319 3 /4" x 11/2" x 3/16" 241D 50/200 97329 97330 3 /4" x 2" x 3/16" 241D 50/200 97340 97341 1" x 1" x 3/16" 241D 50/200 97373 97374 1" x 11/2" x 1/8" 241D 50/200 97394 97395 1" x 11/2" x 3/16" 241D 50/200 97405 97406 1" x 11/2" x 1/4" 241D 50/200 97383 97384 1" x 2" x 3/16" 241D 50/200 97414 97415 * Add Prefix 051144- to UPC No. when ordering. Kut stock items 50 96949 96958 96967 96977 96986 96996 97005 97012 97021 97030 97040 97050 97057 97064 97074 97114 97124 97134 129 60 96940 96950 96959 96968 96978 96987 96997 14024 97013 97022 97031 97041 97051 14028 97065 97075 97097 97105 97115 97125 97135 97152 97162 97143 97161 97142 97177 97187 97188 97170 97208 97209 97198 97199 97230 97231 97219 97220 97238 97247 97256 97264 97270 97279 97288 97300 97320 97331 97342 97375 97396 97239 97248 97257 14034 97271 97280 97289 97301 97321 97332 97343 97376 97397 97407 97385 97386 97416 97417 62 Grade and UPC No.* 80 100 120 96941 96951 14021 96969 96979 96988 96998 14023 150 180 240 320 96944 96945 96954 96963 96973 96982 96992 97001 97008 97017 96946 96955 96964 96974 96983 96993 97002 96947 96956 96965 96975 96984 96994 97003 97010 97019 97028 97038 97048 96942 96952 96960 96970 96980 96989 96999 97006 97014 97023 97024 97032 97033 97042 97043 97052 14027 97066 97067 97076 97077 97098 97106 97107 97116 97117 97126 97127 97136 14029 97163 97164 97144 97145 97178 97179 97189 97190 97171 97210 97211 97200 97232 97233 97221 97222 96943 96953 96961 96971 96981 96990 97000 14022 97015 97025 97034 97044 97053 14026 97068 97092 97099 97108 97118 97128 97058 97069 97093 97100 97109 97119 97129 97137 97153 97154 97165 97146 97147 97180 97181 97191 97192 97172 97212 97213 97201 97202 97234 97223 97224 97018 97027 97036 97037 97046 97047 97054 97059 97061 97070 97071 97578 97094 97101 97102 97110 97111 97120 97121 97130 97131 97138 97139 97155 97156 97166 97167 97148 97149 97182 97183 97193 97194 97173 97174 97214 97215 97203 97204 97235 97236 97225 97226 97240 97241 97249 97250 97258 14033 97265 97272 97273 97281 97282 97290 97291 97302 97323 97333 97334 97344 97345 97377 97398 97399 97408 97387 97388 97418 97419 97242 97251 97259 14032 97274 97283 97292 97303 97324 97335 97346 97378 97400 97409 97389 97420 97244 97252 97260 97267 97276 97285 97294 97305 97326 97337 97348 97380 97402 97411 97391 97422 96962 96972 96991 97007 97016 97026 97035 97045 97243 97266 97275 97284 97293 97304 97325 97336 97347 97379 97401 97410 97390 97421 97245 97253 97261 97268 97277 97286 97295 97306 97327 97338 97349 97381 97403 97412 97392 97423 97062 97072 97095 97103 97112 97122 97132 97140 97157 97168 97150 97184 97195 97175 97216 97205 97237 97227 97246 97254 97262 97269 97278 97287 97296 97307 97328 97339 97350 97382 97404 97413 97393 3M 211K Three-M-ite Elek-Tro-Cut Cloth J Wt. 3M 241K Three-M-ite Elek-Tro-Cut Cloth X Wt. TM TM TM TM TM TM These glue bond cartridge rolls are available in regular or full-tapered shapes, and provide a handy, durable abrasive tool for grinding and finishing those hard-to-reach areas. 130 Size Prod. Pkg. Dia x W x AH I.D. Min./Unit 36 40 Regular 1 /4" x 1" x 1/8" 211K 50/200 3 /8" x 1" x 1/8" 211K 50/200 3 /8" x 11/2" x 1/8" 211K 50/200 1 /2" x 11/2" x 1/8" 211K 50/200 1 /2" x 11/2" x 1/8" 241K 50/200 Full Taper 1 /2" x 1" x 1/8" 211K 50/200 1 /2" x 11/2" x 1/8" 211K 50/200 * Add Prefix 051144- to UPC No. when ordering. Kut stock items 50 60 Grade and UPC No.* 80 100 120 150 180 240 320 40030 40021 40012 40009 40040 40010 40043 40042 40041 Accessories - Cartridge Rolls 3M Mandrels and Spindle TM Screw type mandrels and forked spindle holders for cartridge rolls. 3M Mandrels Shank Dia. Pilot Length Pilot Dia. 3M Spindle (forked) Diameter Mandrels 3 /32" 1 /8" 3 /16" 3 /16" 1 /4" Spindle 1 /4" Length Shank UPC No. /4" /4" 1 /4" 1 /4" 1 /4" 051144-45120 051144-45119 051144-45118 051144-45117 051144-45116 /4" 051144-45121 /4" 1" 11/2" 1" 11/2" 1 - 1 3 Pilot Shank Dia. 1 131 Maximum Operating RPMs: 1 /2" and smaller dia. - 24,000 5 /8 - 3/4" dia. - 16,000 1" dia. - 12,000 63 Evenrun Bands Evenrun bands are constructed of sharp, well-bonded mineral, coated on a strong drills cloth backing and spirally wound over a cloth inner liner. This forms an abrasive-surfaced cylinder that can rotate smoothly in either direction. This easy-to-use product provides a fast, continuous cut and longlife performance so as to get lower costs per work piece. 3M 747D Regalite Polycut RB Cloth TM TM TM X Wt. A premium constructed Evenrun Band utilizing 3M's Cubitron & aluminum oxide minerals. An outstanding value for use on a variety of exotic and other metals. Size Pkg. Dia. x WD Prod. I.D. Min./Unit 36 40 1 /2" x 1" 747D 50/200 1" x 1" 747D 50/200 2" x 1" 747D 50/200 3" x 1" 747D 50/200 * Add Prefix 051144- to UPC No. when ordering. Kut stock items 50 80765 80766 132 60 80769 80770 80771 80772 133 64 Grade and UPC No.* 80 100 120 80773 80774 80782 80775 80783 80776 150 180 240 320 134 3M 241D Three-M-ite RB Cloth X Wt. TM TM This product is constructed of sharp, resin bonded aluminum oxide grain, coated on a strong drills cloth backing and spirally wound over a cloth inner liner. It forms an abrasive-surfaced cylinder that can rotate smoothly in either direction. This easy-to-use product provides a fast, continuous cut and long-life performance so as to get lower costs per workpiece. 135 Size Prod. Pkg. Dia. x WD I.D. Min./Unit 36 40 1 /4" x 1/2" 241D 50/200 3 /8" x 1/2" 241D 50/200 97433 3 /8" x 1" 241D 50/200 97442 1 /2" x 1/2" 241D 50/200 97451 97452 1 /2" x 1" 241D 50/200 97458 97459 1 /2" x 11/2" 241D 50/200 97464 97465 1 /2" x 2" 241D 50/200 97475 97476 3 /4" x 1/2" 241D 50/200 97486 97487 3 /4" x 3/4" 241D 50/200 97496 97497 3 /4" x 1" 241D 50/200 11976 97504 3 /4" x 11/2" 241D 50/200 11977 97509 3 /4" x 2" 241D 50/200 97516 97517 1" x 1/2" 241D 50/200 97527 97528 1" x 1" 241D 50/200 40214 40213 1" x 11/2" 241D 50/200 40207 97542 1" x 2" 241D 50/200 97548 97549 1" x 3" 241D 50/200 97558 97559 11/2" x 1" 241D 50/200 40203 11982 11/2" x 11/2" 241D 50/200 40200 40199 11/2" x 2" 241D 50/200 11985 97584 2" x 1" 241D 50/200 40193 97590 2" x 11/2" 241D 50/200 97597 97598 2" x 2" 241D 50/200 40187 40186 3" x 1" 241D 50/200 40179 97610 3" x 2" 241D 50/200 97616 97617 3" x 3" 241D 50/200 40178 * Add Prefix 051144- to UPC No. when ordering. Kut stock items 50 97425 97434 97443 97453 97466 97477 97488 97498 40236 97454 97518 97529 40212 40265 97550 97560 97569 11984 11987 97591 97599 40185 97611 97618 40176 60 97426 97435 97444 40228 40225 97467 97478 97489 97499 40221 11978 97519 97530 40211 11980 40268 97561 40202 40197 40267 40192 40189 40184 Grade and UPC No.* 80 100 120 40243 97427 97428 97436 97437 97438 97445 97446 40227 40226 40252 40224 40247 11973 97468 97469 97470 97479 97480 97481 40242 97490 97491 40223 97500 40250 40220 40244 40219 40241 97510 97511 97520 97521 97522 97531 97532 97533 40210 40209 40208 40205 97543 11981 97562 40201 40196 40270 11990 40188 40183 40269 97619 97620 40175 40174 65 97563 97570 97576 97585 97592 97600 97605 97621 97627 150 97429 97447 97455 97460 97471 97482 97492 97579 97505 97512 97523 97534 97538 97544 180 97430 97439 97448 97456 97461 97472 97483 97493 97501 97506 97513 240 97431 97440 97449 40256 97462 97473 97484 97494 97502 97507 97514 320 97432 97450 97457 97463 97474 97485 97495 97503 97508 97515 97535 97539 97545 97536 97540 97546 97537 97541 97547 97564 97565 97571 97572 40274 97580 97586 11991 97593 97601 11994 97606 97612 97622 97623 40172 97628 97566 97573 97581 97587 97594 97602 97607 97613 97624 97629 97567 97574 97582 97588 97595 97603 97608 97614 97625 97630 97568 97575 97583 97589 97596 97604 97609 97615 97626 97631 Accessories - Evenrun Bands 3M Rubber Slotted Expander Wheels TM Slotted wheels available in a wide variety of sizes for use with Evenrun bands and belts. Width Dia. Centrifugal force while tool is running holds Evenrun Bands on expander wheels. Diameter 1" 11/2" 2" 2" 3" Width 1" 1" 1" 2" 3" Shank 1 /4" 1 /4" 1 /4" 1 /4" 5 /8" - 11 thread internal Max. Oper. RPMs UPS No.* 18,000 051144-77717 14,000 051144-77718 12,000 051144-77720 6,000 051144-77721 6,000 051144-77722 136 3M Rubber Cushion Polishing Wheels TM Available in a wide variety of sizes for use with Evenrun bands and belts. Width Dia. Tighten nut to secure Evenrun Band onto wheel. Diameter 1 /4" 3 /8" 3 /4" 1 /2" 1 /2" 1 /2" 1 /2" 3 /4" 3 /4" 3 /4" 3 /4" 1" 1" 1" 11/4" 11/2" 11/2" 11/2" 2" 2" 2" 3" 3" Width 1 /2" 1 /2" 3 /4" 1 /2" 3 /4" 1" 11/2" 1 /2" 3 /4" 1" 11/2" 1" 11/2" 2" 1" 1" 11/2" 2" 1" 11/2" 2" 3" 3" Shank 1 /8" 1 /8" 1 /8" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 1 /4" 3 /8" 1 /2" Max. Oper. RPMs UPS No.* 23,000 051144-45159 23,000 051144-45158 15,000 051144-45147 30,000 051144-45156 15,000 051144-45154 15,000 051144-45153 15,000 051144-45152 30,000 051144-45148 24,000 051144-45146 17,000 051144-45145 10,000 051144-45144 18,000 051144-45139 10,000 051144-45138 8,000 051144-45137 15,000 051144-45136 14,000 051144-45132 10,000 051144-45131 8,000 051144-45130 11,000 051144-45129 8,000 051144-45128 6,000 051144-45127 3,000 051144-45124 3,000 051144-45123 137 * Part numbers apply to complete wheel not cushions. 66 3M Square Pads TM 3M Square Pads are ideal for fast grind-blending on channels, fillets, corners or spotting on flat surfaces. As the pad rotates, the corners exert a fast, biting action and gradually weardown, constantly exposing fresh abrasive. 138 Size 2" x 2" x 1/2" 2" x 2" x 3/8" 21/2" x 21/2" x 1/4" 21/2" x 21/2" x 3/8" 21/2" x 21/2" x 1/2" 3" x 3" x 1/4" 3" x 3" x 3/8" Prod. I.D. 241D 241D 241D 241D 241D 241D 241D Pkg. Min./Unit 50/100 50/100 50/100 50/100 50/100 50/100 50/100 60 051144-97711 051144-97714 051144-97715 051144-97717 051144-97721 051144-97719 Grade and UPC No. 80 051144-97709 051144-97712 051144-97716 051144-97718 051144-97722 051144-97720 120 051144-97710 051144-97713 051144-97723 Kut stock items 3M Cross Pads TM 3M Cross Pads are used for close tolerance polishing of small radii and channels, deburring the ends and insides of tubing and many other special applications. 139 Pkg. Size Prod. I.D. Min./Unit 3 /4" x 3/8", 8 ply, 348 Eyelet 241D 50/100 1" x 3/8", 8 ply, 348 Eyelet 241D 50/100 11/2" x 1/2", 8 ply, 832 Eyelet 241D 50/100 2" x 1/2", 8 ply, 832 Eyelet 241D 50/100 2" x 3/4" , 8 ply, 832 Eyelet 241D 50/100 2" x 3/4", 8 ply, (1/4 -20 Eyelet) 241D 50/100 2" x 3/4", 10 ply, (1/4-20 Eyelet) 241D 50/100 2" x 1", 8 ply, (1/4-20 Eyelet) 241D 50/100 2" x 1", 10 ply, (1/4-20 Eyelet) 241D 50/100 21/4" x 1/2", 8 ply, 832 Eyelet 241D 50/100 21/2" x 3/4", 8 ply, (1/4-20 Eyelet) 241D 50/100 21/2" x 3/4", 10 ply, (1/4-20 Eyelet) 241D 50/100 3" x 1", 8 ply, (1/4 -20 Eyelet) 241D 50/100 3" x 1", 10 ply, (1/4 -20 Eyelet) 241D 50/100 3" x 11/2", 8 ply, (1/4 -20 Eyelet) 241D 50/100 3" x 11/2", 10 ply, (1/4 -20 Eyelet) 241D 50/100 31/2" x 11/2", 8 ply, (1/4 -20 Eyelet) 241D 50/100 4" x 1", 8 ply, (1/4 -20 Eyelet) 241D 50/100 4" x 1", 10 ply, (1/4 -20 Eyelet) 241D 50/100 4" x 11/2", 8 ply, (1/4 -20 Eyelet) 241D 50/100 41/2" x 11/2", 10 ply, (1/4 -20 Eyelet) 241D 50/100 5" x 11/2", 8 ply, (1/4 -20 Eyelet) 241D 50/100 6" x 11/2", 8 ply, (1/4 -20 Eyelet) 241D 50/100 6" x 2", 8 ply, (1/4 -20 Eyelet) 241D 50/100 Kut stock items 60 051144-97727 051144-97730 051144-97733 051144-97736 051144-97739 051144-97745 051144-97747 051144-97750 051144-97753 051144-97755 051144-97758 051144-97760 051144-97762 051144-97765 051144-97768 051144-97771 051144-97773 051144-97776 051144-97780 051144-97783 67 Grade and UPC No. 80 100 051144-97724 051144-97725 051144-97728 051144-97731 051144-97734 051144-97737 051144-97740 051144-97742 051144-97743 051144-97746 051144-97748 051144-97751 051144-97754 051144-97756 051144-97759 051144-97761 051144-97763 051144-97766 051144-97769 051144-97772 051144-97774 051144-97777 051144-97778 051144-97781 051144-97784 051144-97786 120 051144-97726 051144-97729 051144-97732 051144-97735 051144-97738 051144-97741 051144-97744 051144-97749 051144-97752 051144-97757 051144-97764 051144-97767 051144-97770 051144-97775 051144-97779 051144-97782 051144-97785 3M Square/Cross Pad Mandrel TM 140 Size 1 /4" Dia. x 8 - 32 external thread 1 /4" Dia. x 1/4 - 20 external thread Case Quantity 1 1 Square Pad Size 2" x 2" 21/2" x 21/2" 3" x 3" Eyelet 1 /4" - 20 1 /4" - 20 1 /4" - 20 Cross Pad Size Less than 2" 2" 2" 3" 31/2" 4" and 41/2" 5" 6" Ply 8 or 10 8 or 10 8 or 10 8 or 10 8 or 10 8 or 10 8 or 10 8 or 10 UPC No. 051144-14307 051144-14308 Eyelet 8-32 1 /4" - 20 8-32 1 /4" - 20 1 /4" - 20 1 /4" - 20 1 /4" - 20 1 /4" - 20 68 Max. Oper. RPMs 12,000 10,000 9,000 Max. Oper. RPMs 24,000 20,000 18,000 18,000 15,000 12,000 10,000 9,000 Miscellaneous - Coated Abrasive Products 3M 415U/415N Stikit Tri-M-ite Silicon Carbide Refill Rolls TM TM TM Stikit refill rolls are one long continuous strip of abrasive with the adhesive already applied. Operators use ALL the abrasive taken from the roll...with conventional methods, a great deal of the abrasive is wasted since it must be wrapped around a block and is not used for sanding. Stikit abrasives, used in conjunction with a sanding block, also eliminate many of the problems associated with hand sanding, such as splinters and finger marks on the wood surface from uneven sanding pressure. And Stikit refill rolls, unlike loose abrasives, do not end up on the floor of the plant where they're apt to be swept up at the end of the day, causing unnecessary waste. Pkg. Size Prod. I.D. Min./Unit 80A 100A 21/2" wide 415U 10/50 14475 16287 31/4" wide 415U/415N 10/50 14476 16295 * Add Prefix 051144- to UPC No. when ordering. ** 415N 141 120A 16286 16294 Grade and UPC No.* 150A 180A 220A 16285 16284 16283 16293 16292 16291 240A 280A 320A 16289 **16288 Stikit Sanding Blocks TM sealer and whitewood sanding, metal preparation, plastics, paint repair areas, and many more. Sanding blocks are made of a tough plastic for long life and durability. Sand into corners with the flat end...Sand into curved or contoured areas with the rounded end. The cushioned back-up pad is durable and holds the abrasive firmly in place. Discover their versatility in top coat sanding, Size 21/2" wide 31/4" wide Pkg. Min./Unit 10 10 UPC No. 051144-45203 051144-45204 142 69 3M Sanding Sponges TM 3M offers a broad selection of sanding sponges with different features and densities for both flat and contoured surfaces...ideal for corners, contours, sealer and flat surfaces on wood, metal, plastic and paint. 143 Product 3M Full Size Sanding Sponge 3M Softback Sanding Sponge Size 33/4" x 25/8" x 1" 51/2" x 41/2" x 3/16" Min. Pkg./Case 24/48 20/120 Bulk Packed Product 3M Full Size Sanding Sponge 3M Softback Sanding Sponge 3M High Flexibility Sanding Sponge 3M Flexible Sanding Pad Size 33/4" x 25/8" x 1" 51/2" x 41/2" x 3/16" 33/4" x 33/4" x 1/2" 43/4" x 33/4" x 1/2" Min. Pkg./Case 250/Case 250/Case 108/Case 250/Case Product 3M Brand Pro-Pad Sanding Sponge Size 4" x 2 7/8" x 1/2" Min. Pkg./Case 108/Case Grade and UPC No. MED 051115-00408 051131-02606 MED 051115-06967 051115-06966 051115-00630 051115-02622 FIN 051115-00409 051131-02604 SFN 051131-02602 Grade and UPC No. FIN 051115-06968 051115-06965 051115-00631 051115-02623 SFN 051115-06964 Grade and UPC No. 60 051115-07057 80 051115-07058 100 051115-07059 150 051115-07060 Top Coat Rubbing Kit Scotch-Brite Rolls for topcoat rubbing * provide consistency and uniformity...beautiful hand rubbed look * are available in a wide range of types and grades...produce the finish you need-low to high gloss * won't cut hands...safer for operators to use than steel wool 144 Product 410S Product 410S Contents 40 sheets 401Q Wetordry Tri-M-ite P600 grade paper 32/3" x 9" 40 sheets 401Q Wetordry Tri-M-ite P800 grade paper 32/3" x 9" 40 sheets 401Q Wetordry Tri-M-ite P1000 grade paper 32/3" x 9" 40 sheets 401Q Wetordry Color Sanding P1200 grade paper 32/3" x 9" 6 sheets Scotch-Brite Clean and Finish T 4" x 211/2" 6 sheets Scotch-Brite Clean and Finish S ULF 4" x 101/2" 4 sheets Scotch-Brite High Gloss 4" x 101/2" Scotch-Brite Super Polish 4" x 101/2" 1 3M Compound Six Pack 1 bottle Finesse-it Compounding Material Ebony 12 oz. 1 bottle Finesse-it Compounding Material Ivory 12 oz. 1 bottle Finesse-it Finishing Material Ebony 12 oz. 1 bottle Finesse-it Finishing Material Ivory 12 oz. 1 bottle Finesse-it Final Finish Easy Clean-up 12 oz. 1 bottle Finesse-it Protective Wax 12 oz. 1 each Demo Video Kits/Case 1 70 UPC No. 048011-16404 3M Flexible Diamond Products TM Achieve better finishes-without sacrificing cut rates on hard-to-grind materials with 3M Flexible Diamond Products. A metal plated bond or tough resin bond securely anchors micron graded diamonds to our premium, flexible backing material to offer durability and longer life, while allowing conformance to a variety of contours. The open dot pattern produces aggressive cutting action and reduces loading. 3M 6200J Hand Pads TM 145 Size Pads/Case M250 M125 21/4" x 33/4" 10 14998 14999 21/4" x 4" 10 14983 14984 3" x 3" 10 14976 14977 * Add Prefix 051144- to UPC No. when ordering. M74 80098 14985 14978 Micron Grade and UPC No.* M40 M20 M10 80099 80100 81895 14986 14987 14979 14980 R30 80101 14988 14981 R10 80102 14989 14982 3M 6220J Whetstone TM Used for precision faceting, sharpening chisels, blades, carbide tools, etc. 146 Micron Grade and UPC No.* M74 M40 84362 84363 84366 84367 84370 84371 Size Items/Case M125 4" x 1" (DW41) 5 84361 6" x 2" (DW62) 5 84365 8" x 3" (DW83) 3 84369 * Add Prefix 051144- to UPC No. when ordering. M20 84364 84368 84372 3M 6223J Professional Diamond Whetstone TM Professional Diamond Whetsones will give you a perfect edge on all your blades and tools. 147 Size Items/Case 1" x 4" (DW61) 5 2" x 6" (DW42) 5 * Add Prefix 051144- to UPC No. when ordering. Micron Grade and UPC No.* M40 85922 85907 M74 85921 85924 71 M20 85923 85908 3M 6002J QRS Discs TM Aggressive, clean-cutting and long lasting. Ideal for finishing, touch-ups or repair of hard to grind materials: ceramics, composites, glass, carbide, stone, marble and fiberglass. Excellent for polishing dies and molds. Hook-and-Loop backing makes changing discs easy, just pull off the disc in use and press on another. Intended for use with 3M Hookit Roloc Disc Pad, Type J. 148 Disc Diameter Discs/Case M250 1" 10 84373 11/2" 10 84381 3" 5 80189 * Add Prefix 051144- to UPC No. when ordering. M125 84374 84382 80190 Micron Grade and UPC No.* M74 M40 84375 84376 84383 84384 80191 80192 M20 84377 84385 80193 M10 84378 84386 84397 3M 6234J TG Discs TM From tough grinding applications through fine finishing operations, 3M Roloc Flexible Diamond Discs can do the job quickly with consistent, predictable results. Can be used on right angle and straight air tools as well as flexible shaft grinders. Must be used with proper 3M Roloc disc pad hardware. 149 Disc Diameter Discs/Case M250 M125 1" 10 84398 84399 11/2" 10 85238 85239 2" 10 85246 85247 3" 5 85254 85255 * Add Prefix 051144- to UPC No. when ordering. M74 85232 85240 85248 85256 Micron Grade and UPC No.* M40 M20 M10 85233 85234 85235 85241 85242 85243 85249 85250 85251 85257 85258 85259 72 R30 85236 85244 85252 85260 R10 85237 85245 85253 85261 3M Diamond Files TM * Diamond files are highly versatile -- great for many uses: grind hard-to-cut materials, fine-finish delicate surfaces, bevel edges, remove burrs, sharpen tools. * Use wet or dry. For better results, use with water or an oil lubricant. * Available in sets of 4 file sizes and a choice of 3 grades, from 125 micron to 20 micron. * The different micron grades are conveniently color coded. Packaging: SETS: consist of 4 files, one of each size. All files in a set are the same grade. FILES: Minimum package = 10 files per box. 5 boxes/unit. Files may not be assorted within a box. 150 Micron Grade/Color/UPC No. Size 11/2" x 3/4" 13/4" x 1/2" 13/4" x 1/2" half round 21/2" x 1/4" Sets Assorted M125 (Black) 051144-80829 051144-80833 051144-80837 051144-80841 M74 (Red) 051144-80830 051144-80834 051144-80838 051144-80842 M40 (Yellow) 051144-80831 051144-80835 051144-80839 051144-80843 M20 (White) 051144-80832 051144-80836 051144-80840 051144-80844 051144-80130 051144-80131 051144-80132 051144-80133 Accessories - Flexible Diamond Products 3M Hookit Roloc Disc Pad, Type J TM TM TM This resilient, conformable pad is ideal for use on shaped and contoured surfaces. Hook material attached to neoprene foam which provides a resilient base for Flexible Diamond QRS discs. Makes grade changes easy. Pads must be used with proper 3M Roloc disc pad hardware as listed on page 17. 151 Size 1" dia. 11/2" dia. 2" dia. 3" dia. Quantity 10 5 5 1 UPC No. 051144-82564 051144-82565 051144-82566 051144-82567 73 3M coated abrasive and surface conditioning products can improve quality, consistency and productivity to help you achieve better results more cost-effectively. For More Information and Assistance: Contact your local 3M coated abrasive or surface conditioning products distributor or 3M at the numbers listed below. For the contiguous 48 United States Call ............................1-800-742-9546 Fax .............................1-800-852-4668 For: Alaska.............................907-522-5200 Canada ...........................519-451-2500 Hawaii............................808-422-2721 Northern Mexico...........915-599-4685 Puerto Rico....................809-750-3000 Important Notice: Distributed by: 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This brochure is intended to be an introductory summary of 3M products. The information provided is based on typical conditions and is believed to be reliable. However, many factors beyond the control of 3M can affect the use and performance of 3M products in a particular application. Since these factors are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether the product is fit for the particular application. All details concerning product specifications are available from 3M. Always read and follow instructions for use and wear appropriate protection for eyes, face, hands and body. Do not exceed maximum RPM's. Use guards provided with machine. LIMITATION OF REMEDIES AND LIABILITY: If the 3M product is proven to be defective THE EXCLUSIVE REMEDY, AT 3M'S OPTION, SHALL BE TO REFUND THE PURCHASE PRICE OF OR REPLACE THE DEFECTIVE 3M PRODUCT. 3M shall not otherwise be liable for any loss or damages, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including tort, contract, negligence, warranty, or strict liability. Safety Information Always use appropriate protective glasses, face shields and body protection. Do not exceed maximum operating RPM's. Use guards provided with machine. Follow safety operation procedures posted in work areas. 3 Abrasive Systems Division 3M Center, Building 223-6N-01 St. Paul, MN 55144-1000 60-4400-0168-7(399)JR E Printed on 10% post-consumer waste paper. (c) 3M 1999