Grindline Express
Coated Abrasive, Surface Conditioning
and Superabrasive Products
3
7
4
1
2
3
56 8
9
1
Index
Introduction........................................................................2
Safety......................................................................................3
Scotch-BriteTM Hand Pads and Rolls........................6
Accessories ..........................................................................8
Coated Abrasive Sheets and Rolls.......................9-11
Discs.................................................................................12-33
Fibre Discs (Accessories)..................................................12
Flap Discs ..........................................................................13
RolocTM Discs (Accessories)..............................................16
Bristle Discs.......................................................................22
StikitTM Abrasive Discs.......................................................25
PSA Discs (Accessories)...................................................26
Surface Conditioning Discs (Accessories).......................28
Coating Removal Discs (CRD)........................................29
Clean and Strip Discs........................................................30
High Strength Discs ..........................................................31
Belts.................................................................................34-41
Bench Top Belts ................................................................34
Deburring Belts ................................................................36
Portable Belts ....................................................................38
Scotch-BriteTM Surface Conditioning Belts ......................39
Wheels ...........................................................................42-55
Scotch-BriteTM EXL Deburring Wheels ...........................43
Scotch-BriteTM EXL Unitized Deburring Wheels ............44
Clean and Strip Cup Wheels.............................................45
Multi-Finishing Wheels.....................................................46
Cut and Polish Wheels......................................................46
Accessories - Scotch-BriteTM Wheels.................................47
PGTM Wheels (Accessories) ...............................................50
Green CorpsTM Cutoff Wheels ..........................................55
Bench Area Pr oducts ..............................................56-68
Stars ...................................................................................58
COMBI Wheels ................................................................59
Accessories-Bench Area....................................................60
Cartridge Rolls (Accessories)...........................................61
EvenrunTM Bands (Accessories).........................................64
Square Pads........................................................................67
Cross Pads .........................................................................67
Miscellaneous .............................................................69-70
StikitTM Refill Rolls ...........................................................69
Sanding Sponges ...............................................................70
3MTM Flexible Diamond Products ......................71-73
Accessories........................................................................73
2
Coated Abrasives
7-5-4
Backed by over 90 years of industrial experience, 3M
Research has been a proven leader in developing new coated
abrasive products and systems for modern production opera-
tions.
In designing the versatile line of products, 3M draws from a
proven formula that's your assurance of dependable perform-
ance.
The formula is: 7 Minerals5 Backings4 Bonds.
7 Minerals
Minerals perform the basic job of cutting, 3M offers seven
kinds of natural and synthetic minerals to provide a rapid
cut and long working life.
Natural Minerals: emery, garnet.
Synthetic Minerals: ceramic aluminum oxide, aluminum
oxide, alumina zirconia, silicon carbide, industrial dia-
monds.
5 Backings
They’re the platforms that carry and support the mineral
grains.
Introduction
The Grindline Express catalog contains a wide variety of
Scotch-Brite surface conditioning products as well as a large
assortment of coated abrasive products designed to meet the
needs of both production applications and day to day MRO
situations. Choose from hand pads, rolls, discs, wheels, belts
and various bench area products. And, of course, we offer a
complete line of accessories to optimize product performance.
3M abrasive products are used on most materials including
ferrous and non-ferrous metals, specialized alloys, wood, plas-
tics, composites, ceramics, glass, leather and rubber. Types of
operations include grinding, deburring, cleaning, finishing,
polishing and blending.
How to use this catalog
This catalog is designed to be as “user friendly” as possible.
We have divided the catalog into sections: Hand Pads, Sheets,
Discs, Rolls, etc. You will see that each section begins with a
page that includes application photos and suggested uses. Each
section includes several tables containing the various products.
Simply find the size and grade for you, make a note of the
UPC number and order the product from your 3M Abrasive
Systems Division Distributor.
Splices (where applicable) are shown at the bottom of the
page.
Kut Stock items are identified with red UPC numbers.
Thanks for choosing 3M coated abrasive, surface conditioning
and superabrasive products.
The five categories include paper, cloth, fibre, paper and
cloth combination and polyester film.
4 Bonds
3M Coated Abrasives have two layers of adhesives: a
“make” coat to anchor the mineral, and a “size” coat to lock
the mineral to the backing.
3M offers four types of bonds; glue, resin over glue, resin
over resin and waterproof.
Remember the formula: 7 Minerals5 Backings4 Bonds.
It multiplies into an almost infinite combination of practical,
durable tools. Your 3M representative will help you find the
right combination to do the best job for you.
Coated Abrasives should be selected carefully, matching the
coated abrasive qualities to the materials and tools used and
the desired results. The answers to the questions below will
help determine the best coated abrasive to use for a specific
application:
Kind of substrate material—What is the composition of the
surface to be finished? What type of mineral is required to cut
the substrate? Does it have to be sanded wet or dry? Will it
tend to load the abrasive? The basic material is an important
factor in selecting the proper coated abrasive product.
Shape and condition—Is the surface flat or contoured?
Will the surface require a great deal of stock removal to level
a surface or to remove coats of paint or varnish, or does the
surface just have to be finished in preparation for coating?
Equipment—The equipment at hand will influence the form
of coated abrasive. Some equipment requires pre-fabricated
belts while others require cut sheets or discs.
Finish—What type of final finish is needed? A rough finish or
a smooth finish? The finish determines the grade or grade
sequence to use.
3M manufactures coated abrasives in many shapes and sizes
such as the standard sheets, rolls, discs, and belts. Also avail-
able are many specialized abrasive constructions such as PG
wheels, evenrun bands, cartridge rolls, fiber discs, adhesive
backed abrasives, and others.
Coated abrasive grades—Grade sizes are the size of the min-
eral grain. There are 22 common grades. They range from the
coarsest, grade 12, to an extremely fine powder like mineral
form, grade 600. For many newer applications, minerals are
also produced in more accurate gradations which are designat-
ed by the average particle diameter in microns. There are 12
micron grades. An open coat abrasive has mineral grains that
cover about 40% to 70% of the backing. An open coat abra-
sive is used where the material surface being abraded tends to
clog or load the coated abrasive surface. A closed coat abra-
sive has mineral grains covering 100% of the abrasive back-
ing. This construction is used where loading is less of a prob-
Size adhesive Mineral
Make adhesive Backing
3
Surface Conditioning
Products
Mineral, Resin and Fiber: Building Blocks
for Scotch-BriteSurface Conditioning
Products
Synthetic fibers and abrasive particles are combined and
bonded to form a conformable, three-dimensional, open web
material. The exceptional performance characteristics of this
open web technology have been demonstrated time after time
in countless factories and shops.
Controlled abrasive action helps prevent undercutting or
gouging so there is less chance of disturbing critical
tolerances.
Fresh abrasive is continually exposed to the work surface to
deliver consistent, uniform results and to provide long
product life.
Uniform, close-tolerance construction results in smooth
running wheels, reducing operator fatigue.
The open web allows air to circulate for cool operation so
there’s less risk of warping or discoloring the part.
The open web resists loading to provide consistent surface
preparation and finishing action and long product life.
Abrasive
3-Dimensional Open Web Spring Action
Fiber
Abrasive
Particles
Work
Surface
Resin
Safety
Read and follow instructions for use. Always use appropriate
protective glasses, face shields and body protection. Do not
exceed maximum operating RPM. Use guards provided with
machine. Follow safety operation procedures posted in work
areas.
Conformable action of the web allows the wheels to follow
contours and edges, and to maintain uniform contact with
the surface.
Synthetic fibers eliminate the danger of loose flying wires
commonly associated with wire brushes.
Coated Abrasive
Mineral Type Grade Aluminum Stainless Steel Grade Equivalent
A Coarse 130-150 62-72 80-150
A Medium 80-100 32-40 150-180
A Ver y Fine 16-35 6-12 220- 320
S Super Fine 8-12 4-6 320-600
Surface finishes generated by Surface Conditioning
Finishes Generated (Micro-Inch Range)
4
Performance Advantages Over Competitive Pr oducts
Competitive Product
Steel Wool
Sandpaper: Sheets,
Rolls, Belts and Flap
Wheels
Wire Brushes
Buff and Compound
Tampico and Bristle
Files, Burrs and
Scrapers
Set-Up Wheels
Sand Blasting
Rubber Bonded
Wheels
Cleaning
Leaves No Metal Fines
No Carbon
Contamination on
Surface
Work Piece Protected
Consistent Finish
Resists Loading
Removes all Surface
Contaminants
Doesn’t Fling Wires
Faster
Thorough Cleaning
Won’t Damage Piece
Faster
No Airborne Par ticles to
Be Contained
Cleaner Finish
Faster
Deburring
Work Piece Protected
No Secondary Burrs
Uniform Radius
Complete Burr Removal
Doesn’t Fling Wires
Uniform Radius
Cleaner/Faster
Better Radiused Edge
Won’t Damage Piece
Faster
No Undercutting
Cleaner
Cleaner Finish
Faster
Polishing
Leaves No Metal Fines
No Carbon
Contamination on
Surface
Work Piece Protected
No Secondary Burrs
Cleaner/Faster
Cleaner/Faster
Less Set-Up Time
Cleaner Finish
Faster
Finishing
Leaves No Metal Fines
No Oil Contamination
Consistent Finish
Resists Loading
Work Piece Protected
Cleaner/Faster
Cleaner/Faster
Less Set-Up Time
Scotch-BriteTM Products
Guide to Pr oduct Selection by Application and Tool
Tool
Off Hand
Drill Motor
Straight Grinder
Die Grinder
Right Angle
Grinder
Mini-Angle
Grinder
Right Angle
Die Grinder
Belt Sander
Bench Motor
Cleaning
7447, 6448 Hand Pads
Clean and Strip Discs
High Strength Discs
A MED
Clean and Strip Discs
High Strength Discs
A MED
Unitized Wheels
Surface Conditioning
Discs
Clean and Strip Cup
Wheels
RolocTM Surface
Conditioning Discs
Surface Conditioning
Belts
Deburring
7440, 6444 Hand Pads
Unitized Wheels
High Strength Discs
A VFN
EXL Wheels
Unitized Wheels
Surface Conditioning
Discs
RolocTM Surface
Conditioning Discs
RolocTM Unitized Wheels
Surface Conditioning
Belts
EXL Wheels
Polishing
7448, 7445 Hand Pads
High Strength Discs
A VFN
Unitized Wheels
Surface Conditioning
Discs
Clean and Strip Cup
Wheels
RolocTM Surface
Conditioning Discs
RolocTM Unitized Wheels
Surface Conditioning
Belts
Finishing
7446, 7447 Hand Pads
High Strength Discs
A MED
Surface Conditioning
Belts
(with Expander Wheel)
Surface Conditioning
Discs
RolocTM Surface
Conditioning Discs
RolocTM Unitized Wheels
Surface Conditioning
Belts
Surface Conditioning Products
5
Product Surface Speed
Because product speed has a significant effect on perform-
ance (cut, life, and finish), it is important to select
the proper speed for a particular operation and work piece.
Generally, low speeds are desired for generating very
uniform satin finishes, for finishing aluminum alloys without
lubricants and for use on composite or other soft material
applications. High speeds are recommended when it is
desired to remove or blend surface imperfections. This high
speed will result in faster cut along with finer finishes.
Recommended Operating Speeds
Decorative Finishing.....................................500 - 3000 SFPM
Composites / Soft Materials .......................1200 - 2700 SFPM
Cleaning and Conditioning.........................2000 - 5000 SFPM
Prepolishing .................................................2000 - 7000 SFPM
Oxide Removal ...........................................4500 - 6500 SFPM
Deburring ....................................................5000 - 6500 SFPM
Blending / Polishing....................................6000 - 8000 SFPM
Cutdown Prior to Buffing...........................7000 - 8500 SFPM
Work Pressure
It is important that adequate pressure be used to generate the
desired cut, finish, and life. Excess pressure, however, can
result in decreased product life. Scotch-Brite wheels operate
under work pressures of 10 to 40 pounds per inch of width.
In the case of harder (6 - 9 density) products, high pressures
are usually necessary to gain the full benefit of the wheel.
Feed Speed (Dwell Time)
Feed speed is directly related to product life, finish and cut.
Lower feed speed means longer dwell time and, thus, more
work can be done on the workpiece. When an operation is set
up an attempt should be made to use the fastest feed speed
possible to obtain the desired results. This will give the best
economic result from the standpoint of product life.
In general, if product speed remains constant, fast feed
speeds increase scratch length and, conversely, slow feed
speeds shorten scratch length. This technique can be used to
generate a particular decorative finish.
Oscillation
In many cases, such as decorative finishing and cleaning, it is
desirable to incorporate an oscillatory motion for the purpose
of increasing cut, breaking up directional scratch, and pro-
ducing a uniform finish. A good starting point is 150 CPM
(cycles per minute) at a stroke of 3/8inches. This may be var-
ied depending on the particular result desired.
In off-hand operations, moving the part from side to side will
provide an oscillating action and more uniform finish.
Lubricant – Coolant
Coolants, like water and some water soluble oils, reduce heat
resulting in longer product life and greater cut. In the case of
most oils or tallow lubricants, surface roughness can be
reduced. The higher viscosity lubricants produce lower sur-
face roughness, i.e., grease produces a finer surface finish
than oil. In automatic or semi-automatic operations, it is
desirable to use lubricants or coolants whenever possible.
Product Hardness (Density)
3M wheels are available in a number of densities or hard-
nesses. Generally, the softer products, 2, 3, 4, and 5 density,
are used for decorative finishing. They will conform more
readily to surface contours along with generating a more uni-
form finish. The harder products, 6, 7, 8 and 9 density, are to
be used for the more difficult blending, cleaning and debur-
ring operations.
Facto rs Affecting Performan ce of Surface Conditioning
Products
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3200
3400
3600
3800
4000
2
52
105
157
209
262
314
367
419
471
524
576
628
681
733
785
838
890
942
995
1047
1100
1152
1204
1257
1309
1361
1414
1466
1518
1571
1676
1780
1885
1990
2094
4
104
208
312
416
520
630
735
837
942
1047
1152
1256
1361
1466
1571
1675
1780
1885
1989
2094
2199
2304
2408
2513
2618
2722
2827
2932
3037
3141
3351
3560
3769
3979
4188
6
157
314
471
628
785
940
1100
1256
1413
1570
1727
1884
2042
2199
2356
2513
2670
2827
2984
3141
3298
3455
3612
3770
3927
4084
4241
4398
4555
4712
5026
5340
5654
5969
6283
8
207
414
621
828
1045
1255
1465
1675
1885
2094
2304
2513
2723
2932
3142
3351
3560
3770
3979
4189
4398
4608
4817
5027
5236
5445
5655
5864
6074
6283
6702
7121
7539
7958
8377
10
260
520
780
1040
1310
1570
1835
2094
2356
2618
2880
3142
3404
3666
3927
4189
4451
4713
4975
5236
5498
5760
6022
6284
6545
6807
7069
7331
7592
7854
8378
8901
9425
9948
10472
12
314
628
942
1256
1570
1885
2200
2513
2827
3141
3455
3769
4084
4398
4712
5026
5340
5650
5969
6283
6597
6911
7225
7540
7854
8168
8482
8796
9110
9425
10053
10681
11309
11938
12566
14
364
728
1092
1456
1820
2195
2560
2932
3298
3665
4031
4398
4764
5131
5497
5864
6230
6597
6963
7330
7696
8063
8429
8796
9162
9529
9895
10262
10629
10996
11729
12462
13193
13927
14661
16
419
838
1257
1676
2094
2513
2932
3351
3770
4189
4608
5027
5445
5864
6283
6702
7121
7540
7959
8378
8796
9215
9634
10053
10472
10891
11310
11729
12148
12566
13404
14242
15080
15917
16755
18
471
942
1414
1885
2356
2827
3299
3770
4241
4712
5184
5655
6126
6597
7069
7540
8011
8482
8954
9425
9896
10367
10839
11310
11781
12252
12723
13195
13666
14137
15080
16022
16965
17907
18850
R.P.M.
at
Arbor
or
Spindle
Diameter of wheels
Surface speed in feet per minute (S.F.P.M.)
Surface Speed Conversion Chart
6
Scotch-BriteTM
Hand Pads and Rolls
When surfaces need to be cleaned, scuffed, deburred or fin-
ished by hand, Scotch-Brite hand pads and rolls outperform
steel wool, wire brushes and other non-woven hand pads.
They cut fast and leave a more consistent finish than these
other abrasives. Scotch-Brite material will never rust and can
be used with water or solvents. Truly your best choice for
cleaning and finishing surfaces by hand. The world’s leading
surface conditioning products.
Hand Pads
A select group of Scotch-Brite webs cut into 6"x 9"(the
#5440 are 4"x 6") sheets available in a variety of grades rang-
ing from light duty cleansing to heavy duty.
Product Color Packaging UPC No.
5440 Tan 10 pads/box 048011-16983
(4" x 6" ) 4 boxes/case
7440 Tan 10 pads/box 048011-04050
4 boxes/case
7440B Tan 40 pads/box 048011-18451
bulk pack
7445 White 20 pads/box 048011-16976
3 boxes/case
7445B White 60 pads/box 048011-17637
bulk pack
7446 Gray 10 pads/box 048011-04051
4 boxes/case
7446B Gray 40 pads/box 048011-18453
bulk pack
7447 Maroon 20 pads/box 048011-04029
3 boxes/case
7447B Maroon 60 pads/case 048011-04229
bulk pack
7448 Light 20 pads/box 048011-04028
Gray 3 boxes/case
7448B Light 60 pads/case 048011-14049
Gray bulk pack
Sponge Laminates
Consist of Scotch-Brite material laminated to a 31/2" x 61/4"
cellulose sponge.
Product Color Packaging UPC No.
74 Yellow/ 20 sponges/case 048011-20688
Green bulk pack
Hand Pads for Finishing
7448 7447 7446
Finer Finish Coarser Finish
Less Aggressive More Aggressive
Hand Pads for Cleaning
7445 7447 7440 5440
Finer Finish Coarser Finish
Less Aggressive More Aggressive
Starting Point
Starting Point
11
12
13
7
Clean and Finish Rolls
Can be used for hand clean-
ing, blending, finishing. Can
be cut to desired length for
oscillating sanders.
Color: T ype A - Maroon
Type S - Gray
Type F - White
Cut and Polish Rolls
Scotch-Brite Cut and Polish
Rolls outlast and outperform
ordinary emery cloth and util-
ity rolls around angles, odd
shapes, inside and outside
diameters.
Applications: Stropping pipe
ends for sweat soldering or
welding, general cleaning and
deburring odd shaped materi-
als.
Color: Tan
Mineral Type/Grade UPC No.*
Size Rolls/Case A CRS A MED A FIN A VFN F SFN S MED S FIN S VFN S SFN S ULF T
Clean and Finish Rolls
2" x 30 ft. 6 00292 00291 00260
3" x 30 ft. 4 00296 00261 00299
4"x 30 ft. 3 00302 00264 00265 00266 00263 05170 00269 00270 00267 00268 00262
5" x 30 ft. 2 00273
6" x 30 ft. 2 00306 00274 00275 00276 00307 00278 00308 00277 00252
Cut and Polish Rolls
1" x 30 ft. 12 04085 05733
2" x 30 ft. 6 05206
4" x 30 ft. 3 05207
6" x 30 ft. 2 09024
* Add Prefix 048011- to UPC No. when ordering.
16
17
Production Hand Pad No. 8447
This Scotch-Brite pad delivers higher cut, longer life and a
better finish. Use on aluminum, stainless steel, plastics, wood
and fiberglass. Ideal for paint preparations, surface blending
and scuffing. 3M’s patented perforated pad tears easily into
two convenient 41/2" x 6"pads.
Product Color Packaging UPC No.
8447 Maroon 20 pads/box 048011-24037
3 boxes/case
1514
8
Sheet Rolls
Multi-Flex Abrasive Sheets. A tough, highly conformable,
sharp cutting, non-woven abrasive for cleaning and finishing
surfaces by hand.
Color: AVFN - Purple
S ULF - Gray
Grade and UPC No.
Size Sheets/Roll A VFN S ULF
8" x 4"60 07521 07522
* Add Prefix 051131- to UPC No. when ordering. 18
23
Pad Holders No. 961
The Twist-Lok Pad Holder
No. 961 can be used with
hand pads and roll material
cut to 4"x 6".
Product Holders/Case UPC No.
961 10 048011-09493
Accessories – Hand Pads and Rolls
24
3MTM Mini Mandrel No. 935
Use with 1"x 11/2" pieces of
Scotch-Brite material to fit
into tight areas. The overall
mandrel length is 27/8" with a
1/4" shank.
Product Mandrels/Case UPC No.
935 5 048011-04020
Maximum Operating RPMs: 14,000
25
20 2119 22
Hand Pad Trial Pack
Scotch-BriteTM hand pads are made of durable, three-dimen-
sional, non-woven nylon web impregnated with abrasive min-
erals to outperform steel wool, wire brushes and other non-
woven hand pads.
Packs/
Product Case Contents UPC No.
961S 5 1 Ea. Scrubbing Sponge 74 048011-17144
5 1 Ea. Light Duty Pad 6448
5 1 Ea. Heavy Duty Pad 7440
5 1 Ea. Light Duty Cleansing
Pad 7445
5 1 Ea. Blending Pad 7446
5 1 Ea. General Purpose
Pad 7447
5 1 Ea. Ultra Fine Pad 7448
5 1 Ea. Production Pad 8447
5 1 Ea. TWIST-LOK Pad
Holder 961
9
Coated Abrasive
Sheets and Rolls
3MTM 341T 3M Blue Grit Utility Cloth X
Wt.
3MTM 311T 3M Blue Grit Utility Cloth J Wt.
Tough aluminum oxide mineral bonded to cloth with 3M’s
heat resistant ResiniteTM system. This special bonding tech-
nique allows for a more uniform coating. Your advantage is a
consistent scratch pattern.
Get the ‘‘TRUE BLUEadvantage in all operations: Contour
sanding, strapping, deburring, rust removal, cut-down prior to
polishing, all general maintenance work.
3MTM 241K Three-M-ite TM Elek-Tro-CutTM
X Wt.
3MTM 211K Three-M-iteTM Elek-Tro-CutTM
Cloth J Wt.
These products have many uses in both production and main-
tenance jobs. They have a flexible cloth backing and are coat-
ed with aluminum oxide mineral.
3MTM 001K Crystal BayTM Crocus Cloth
For very fine metal finishing.
3MTM 011K Crystal BayTM Emery Cloth
Glue bond, closed coat, for non-technical use by hand in sheet
form.
Sheets Grade and UPC No.*
Prod. Min.
Size I.D. Pkg./Case 36X 40X 50X 60X 80J 100J 120J 150J
9"x 11"341T/311T 50/250 02463 02462 02461 02460 02459 02458 02457
180J 220J 240J 280J
02456 02455 02454 02453
36X 40X 50X 60X 80J 100J 120J 150J
9"x 11"241K/211K 50/250 02414 02412 02411 02410 02409 02408 02407
180J 220J 240J 280J 320J 400J 500J
02406 02405 02404 02403 02402 12501 12500
36X 40X
9"x 11"001K 50/250 02435
CRS MED FIN
9"x 11"011K 50/250 02433 02432 02431
* Add Prefix 051144- to UPC No. when ordering.
26
27
Rolls Grade and UPC No.*
Prod. Min.
Size I.D. Pkg./Case 40X 50X 60X 80J 100J 120J 150J 180J 220J 240J 280J
1"x 50 yds. 341T/311T 1/5 05112 05111 05110 05109 05108 05107 05106 05105 05104 05103
11/2"x 50 yds. 341T/311T 1/5 05127 05126 05125 05124 05123 05122 05121 05120 05119 05118
2"x 50 yds. 341T/311T 1/5 05143 05142 05141 05140 05139 05138 05137 05136 05135 05134 05133
1"x 50 yds. 241K/211K 1/5 40X 50X 60X 80J 100J 120J 150J 180J 220J 240J 280J
05011 05010 05009 05008 05007 05006 05005 05004 05003
320J 400J 500J
05002 05001 05000
11/2"x 50 yds. 241K/211K 1/5 40X 50X 60X 80J 100J 120J 150J 180J 220J 240J 280J
05032 05031 05030 05029 05028 05027 05026 05025 05024
320J 400J 500J
05022 05021 05020
2"x 50 yds. 241K/211K 1/5 36X 50X 60X 80J 100J 120J 150J 180J 220J 240J 280J
05054 05052 05051 05050 05049 05048 05047 05046 05045 05044 05043
320J 400J 500J
05042 05041 05040
* Add Prefix 051144- to UPC No. when ordering.
10
Grade and UPC No.*
Prod. Min.
Size I.D. Pkg./Case 50 60 80 100 120 150 180 220 240 280
9"x 11"140N (D Wt) 50 slv/500 10035 10034 10033
130N (C Wt) 100 slv/1000 10032 10031 10030
110N (A Wt) 100 slv/1000 10006 10005 10004 10003 10002 10001 10000
* Add Prefix 051144- to UPC No. when ordering.
3MTM 110N, 130N, 140N A, C, D Wt.
Grades 50–280
Garnet sandpaper is the traditional choice of cabinet makers
and wood workers for producing smooth, fine finishes on bare
3MTM 341T 3M Blue Grit Utility Cloth X Wt.
3MTM 311T 3M Blue Grit Utility Cloth J Wt.
3MTM 241K Three-M-iteTM Elek-Tro-CutTM X Wt.
(continued)
3MTM 21 1K Three-M-iteTM Elek-Tro-CutTM
Cloth J Wt.
3MTM 001K Crystal BayTM Crocus Cloth
3MTM 001K Crystal BayTM Emery Cloth
Grade and UPC No.*
Prod. Min.
Size I.D. Pkg./Case 36 40 50 60 80 100 120 150 180 220
9"x 11"346U (D Wt) 50 slv/250 02119
50 slv/500 02118 02117 02116 02115
336U (C Wt) 100 slv/1000 02114 02113 02112
326U (A Wt) 100 slv/1000 02104 02103
* Add Prefix 051144- to UPC No. when ordering.
3MTM 326U, 336U, 346U A, C, D Wt.
Grades 36–220
3M Production sandpaper is an almost universal abrasive.
These long lasting sheets are made with aluminum oxide, a
synthetically produced mineral known for its sharpness and
durability. It is ideal for hand or machine sanding of many dif-
ferent materials, including woods, metals, paints, plastics, and
fiberglass.
Garnet Abrasive Sheets
ProductionAbrasive Sheets
28
29
30
11
These sandpaper sheets are ideal for dry sanding between
coats of varnish, paint, and other finishes. The abrasive surface
has been treated with white stearate, a coating that resists clog-
ging and extends abrasive life. The abrasive is silicon carbide,
a sharp and extremely hard synthetic mineral that cuts fast and
satin smooth.
3MTM 415U Tri-M-iteFre-CutPaper
Open Coat AWt.
A specially treated open coat silicon carbide paper for use
whenever filling or loading of the abrasive is a problem. The
lightweight paper stock is intended for use with hand pad and
disc sanders. These sheets offer a better finish with fewer
paper changes for finishing and blending operations, white
wood sanding, plastics, and fiberglass.
3MTM 435N Tri-M-ite Fre-Cut Paper
Open Coat C Wt.
This is a heavier, more durable sandpaper and is intended to
minimize filling or loading in general purpose sanding.
3MTM 405N Tri-M-ite Fre-Cut Paper
Open Coat AWt. Type F (Flexible)
3MTM 414N Tri-M-ite Fre-Cut Paper
Open Coat AWt. T2
Flexible A weight paper ideal for hand sanding operations
that involve contoured shapes. Designed to provide con-
formability that exceeds that of conventional abrasive sheets.
Grade and UPC No.*
Prod. Min.
Size I.D. Pkg./Case 80 100 120 150 180 220 240 280 320 400 500
9"x 11"415U 100 slv/1000 14175 14177 14179 14181 14183
435N 100 slv/1000 02356 02355 02354 02353
405N 100 slv/1000 10248 10247 10246 10245 10244 10243 10241 10240
414N 100 slv/1000 02352 02351 02350 02349 02348 02347 02346 02345 02344 02342
* Add Prefix 051144- to UPC No. when ordering.
9"x 11"Tri-M-IteFre-CutAbrasive Sheets
3M Wetordrysheets use a silicon carbide abrasive for
efficient cutting and high wear resistance. They feature a water-
proof resin-over-resin bond that resists heat and holds the abra-
sive particles more firmly than conventional glue or resin-over-
glue bonds. Because the sheets are resistant to oil and water,
they can be used with a lubricant to reduce clogging, extend
abrasive life, and improve finish.
3MTM 413Q W etordry Tri-M-ite Paper AWt.
3MTM 431Q W etordry Tri-M-ite Paper C Wt.
Grade and UPC No.*
Prod. Min.
Size I.D. Pkg./Case 60 80 100 120 150 180 220 240 280 320 360 400
9"x 11"413Q 50 slv/500 02007 02004 02003 02002
50 slv/250 02006 02005
431Q 50 slv/500 02019 10699 10697 10695
50 slv/250 02018 02017 02016 02015 02014
* Add Prefix 051144- to UPC No. when ordering.
9" x 11" WetordryAbrasive Sheets
30
31
12
Fibr e Discs
3MTM 785C RegaliteTM Polycut Fibre
3M 785C Discs were developed specifically for stainless
steel grinding and blending. This special blend of Cubitron
Mineral and aluminum oxide minerals with a grinding aid
was precisely designed for stainless steel but is also suitable
for some combinations of stainless steel and carbon steel.
3M 785C is a proven performer for stainless steel fabrication,
food service and restaurant equipment, dairy equipment and
food products machinery.
Packaging: Bulk
Grade and UPC No.*
Min.
Size Prod. I.D. Pkg./Case 24 36 50 60 80 P100 P120
41/2"x 7/8"785C 100 80660 80661 80662 80663
5"x 7/8"785C 100 13975 13976 13977 13978 80654 80655
5"x 7/8"785C 25/100 13931 13930 13928 13926
7"x 7/8"785C 100 13967 13968 13969 13970 80656 80657
7"x 7/8"785C 25/100 13937 13936 13934 13933 13932
91/8"x 7/8"785C 25/100 13943 13942 13940 13939 13938
* Add Prefix 051144- to UPC No. when ordering.
Grade and UPC No.*
Min.
Size Prod. I.D. Pkg./Case 16 24 36 50 60 80 P100 P120
5"x 7/8"280C 25/100 01820 01819 01818
7"x 7/8"280C 25/100 01835 01834 01833
91/8"x 7/8"280C 25/100 01869 01868 01867
16 24 36 50 60 80 100 120
4"x 5/8"281C 25 85950 85951 85954 85955 85956 85957 85958
41/2"x 7/8"281C 25 88959 85960 85961 85962 85963 85964 85965
5"x 7/8"281C 25 85966 85967 85968 85969 85970 85971 85972
7"x 7/8"281C 25 85973 85974 85975 85976 85977 85978 85979
16 24 36 50 60 80 100 120
41/2"x 7/8"381C 25/100 77595 77596 77597 77598 77599 77600 77601
5"x 7/8"381C 25/100 88725 81369 81372 81375 01727 20054 20053 20052
7"x 7/8"381C 25/100 01745 81370 81373 81376 01741 01740 01739 01738
91/8"x 7/8"381C 25/100 01767 81371 81374 81377 01763 01762 01761 01760
* Add Prefix 051144- to UPC No. when ordering.
Kut stock items
32
33
3MTM 280C – 3M Type D Open Coat
These are full resin bond aluminum oxide fibre discs and are
designed for use on portable tools with proper backup pads.
Type C is closed coat and Type D is open. Type XY also
incorporates a grinding aid. Type C is preferred in most
industrial and automotive applications while Type D is used
where loading occurs such as on solder, paint, plastic, etc.
3MTM 281C Fiber Disc
Packaging: Boxed
3MTM 381C – 3M Type C Type XY
Packaging: Boxed
13
3MTM Abrasive Flap Discs
The 3M 747D Abrasive Flap Disc is the new standard for off-
hand grinding and finishing of metals. It provides a consistent
rate of cut for a superior finish and it provides
long-life performance that improves quality and lowers cost.
Grade and UPC No.
Min.
Size Prod. I.D. Pkg./Case 36X 50X 60X 80X 120X
41/2"x 7/8"747D 10 051111-49613 051111-49614 051111-49615 051111-49616 051111-49617
7"x 7/8"747D 5 051111-49608 051111-49609 051111-49610 051111-49611 051111-49612
35
16
Maximum Operating RPMs:
41/2"dia. – 13,300
7" dia. – 8,600
34
Grade and UPC No.*
Min.
Size Prod. I.D. Pkg./Case 36 50 60 80 P100 100 P120 120
41/2"381C 25/100 88847 88848 88849 88850 88851 88852
7"381C 25/100 88853 88854 88855 88856 88857 88858
41/2"785C 25/100 88778 88779 88780 88826 88827 88828
7"785C 25/100 88829 88830 88831 88832 88833 88834
41/2"984C 25/100 88835 88836 88837 88838 88839 88840
7"984C 25/100 88841 88842 88843 88844 88845 88846
* Add Prefix 051144- to UPC No. when ordering.
Kut stock items
36
3MTM TN Quick Change Fibre Discs
TN “Quick Change” is a system in which each disc has its
own mounting nut hardware (5/8"- 11) thread and can be
mounted directly on the tool with the proper accessory back-
up system. This enables the operator to change the product in
a very efficient manner, and there is no need for a retainer nut
or spanner wrench. This system is compatible with 3M Disc
Pad Hubs and Face Plates as well as other backup systems.
3MTM 381C Three-M-ite TM Type “C”
3MTM 785C RegaliteTM Polycut Fibre
3MTM 984C RegalTM Resin Bond Fibre
3MTM Disc Pad Hubs and Face Plates
Backup system for fibre discs or surface conditioning
discs with a 7/8" center hole.
Durable plastic hubs have 5/8"-11 threaded metal insert.
Replaceable face plates are available in three color-coded
densities. Hard-black is for heavy metal removal such as large
welds. Medium-grey provides normal flexibility for general
purpose grinding and finishing. Soft-white is used in finishing
operations and contour grinding.
3M face plates are designed to resist chunking, reduce edge
wear and prolong abrasive disc life.
14
3MTM Disc Pad Hubs and Face Plates
3M's Disc Pad Hubs and Face Plates are light weight, have
excellent balance, and low profile for better grinding and
finishing control. Full size plates give firm support to disc
edge and are tapered to fit the disc shape to minimize flare
and wild scratches. This system can result in long term sav-
ings in parts and changeover time.
3M Disc Pad Hubs have a 5/8"-11 thread metal insert and can
be used on most face plates.
3M Disc Pad Face Plates are color coded by density:
Red – extra hard: Heavy grinding. (Ribbed only)
Black – hard: Heavy metal removal, large welds, etc.
Gray – medium: General purpose grinding and
finishing. Normal flexibility.
White – soft: Finishing operations, flexible,
follows contours.
3MTM Disc Pad Face Plates – Ribbed
Ribbed face plate results in cooler running disc. Higher pres-
sure on the ribbed sections prolongs disc life when dulling is
a problem. Available in 5", 7" and 9" diameter. New red disc
is extra hard for heavy grinding.
Max. Oper.
Diameter Hardness RPMs UPC No.
5"Extra hard – red 12,000 051144-81732
5"Hard-black 12,000 051144-81733
5"Medium-gray 12,000 051144-81734
5"Soft-white 12,000 051144-81735
7"Extra hard – red 8,500 051144-80514
7"Hard-black 8,500 051144-80515
7"Medium-gray 8,500 051144-80516
7"Soft-white 8,500 051144-80517
9"Extra hard – red 6,500 051144-81728
9"Hard-black 6,500 051144-81729
9"Medium-gray 6,500 051144-81730
9"Soft-white 6,500 051144-81731
Max. Oper.
Diameter Hardness RPMs UPC No.
Hubs
21/2"Dia. 5/8"-11 051144-45205
use with all sizes
21/2"Disc Pad Hub-Shor t Shaft Tools 051144-88743
41/2"Dia. 5/8"-11 051144-45190
use with sizes 7", 8" & 9"
Face Plates
41/2"Hard – black 13,000 051144-14270
41/2"Medium – gray 13,000 051144-13325
5"Hard – black 12,000 051144-45206
5"Medium – gray 12,000 051144-45207
5"Soft – white 12,000 051144-45208
7"Hard – black 8,500 051144-45192
7"Medium – gray 8,500 051144-45193
7"Soft – white 8,500 051144-45194
9"Hard – black 6,500 051144-45195
9"Medium – gray 6,500 051144-45196
9"Soft – white 6,500 051144-45197
Kut stock items
Accesso ries – Fibre Discs
3M
Disc Pad
Hub
3M
Disc Pad
Face Plate
3M
Fibre Disc
3M Disc
Retainer
Nut
38
37
15
Optimum Tool Speeds/RPM To Maximize Fibre
Disc Cut Rates And Life
Disc
Size Carbon Steel Stainless Titanium Aluminum
Material Type
41/2"
5"
7"
91/8"
8,500 RPM
8,500 RPM
6,000 RPM
4,500 RPM
7,000 RPM
6,000 RPM
4,500 RPM
3,500 RPM
2,500 RPM
2,500 RPM
2,000 RPM
1,500 RPM
7,000 RPM
6,000 RPM
4,500 RPM
3,500 RPM
Thread Length x Thread Size UPC No.
5/8"x 5/8"-11 051144-05620
1/2"x 5/8"-11 051144-05621
3/8"x 5/8"-11 051144-05622
Thread Length UPC No.
1/2"x 5/8"-11 051131-05632
3MTM Disc Retainer Nuts
For use with all 3M disc pad face plates, disc pads and 3M
disc pad hubs. Nuts have 5/8"-11 threaded arbor hole in three
thread lengths.
3MTM Fibre Disc Pad Hub and Retainer
3MTM Disc HolderAdaptors No. 9
These adaptors will convert
a sander with M10-1.25.
M10-1.50 or 3/8"-24 external
threaded shaft to a 5/8"-11
external threaded shaft.
40
39
External Internal
Thread Thread UPC No.
5/8"-11 M10 - 1.25 048011-22971
5/8"-11 M10 - 1.50 048011-22972
5/8"-11 3/8" -24 048011-22970
Diameter and Thread Size UPC No.
41/2"x 5/8"-11 051144-05633
16
RolocTM Discs
Provide a fast, efficient method for deburring, blending, fin-
ishing, removing tool marks and die polishing on all types of
metals. Resist loading and shelling under severe operating
conditions. They lock securely in place with just a half twist
a half twist and it’s off. Each disc is color coded by grade.
Ideal for use on air tools (right angle and straight) and on
flexible shaft grinders. Additionally, Roloc discs and pads fea-
ture three different types of fastening systems to accommo-
date most any stock that you may currently have on hand.
Easy to mount…easy to change
3M coated abrasive and Scotch-Brite Roloc surface condi-
tioning discs feature a threaded male button attached to the
back of each disc for quick and easy mounting to a Roloc
disc pad. With a quick half-turn, the disc is locked securely in
place for the life of the disc. Each button or disc is color
coded to designate grade.
3MRoloc Disc
Button Color/Grade
Chart
16
24
36
40
50
60
100
150
180
220
240
280
400
RolocTM Discs RolocTM TS Discs RolocTM TP Discs
Threaded
Shaft
Roloc
Disc
Pad
Roloc
Disc or
Wheel
Proper Speed Tool
Roloc System
Accessories: Hook and Loop - See pg. 32.
Roloc - See pg. 23.
41
42
43
44
17
Grade and UPC No.*
Min.
Size Prod. I.D. Pkg./Case 24 36 40 50 60 80 P100 P120
Roloc Discs
1"dia. 777F 50/500 76622 76623 76624 76625 80510
11/2"dia. 777F 50/500 76626 76627 76628 14660 80511
2"dia. 777F 50/200 76629 76630 76433 14661 80508 80512
3"dia. 777F 50/200 76631 76632 76633 76634 80509 80513
4"dia. 785C 25/100 83690 83691 83692 83693 83694 83695
Roloc TS Discs
1"dia. 777F 50/500 76752
11/2"dia. 777F 50/500 76749 76753
2"dia. 777F 50/200 76742 76746 76750 76754
3"dia. 777F 50/200 76743 76747 76751 76755
Roloc TP Discs
1"dia. 777F 50/500 76764 76772
11/2"dia. 777F 50/500 76765 76773
2"dia. 777F 50/200 76762 76766 76770 76774
3"dia. 777F 50/200 76763 76767 76771 76775
* Add Prefix 051144- to UPC No. when ordering.
Kut stock items
3MTM 777FRegaliteTM PolycutTM Resin Bond
Cloth YFWt.
3MTM 785C RegaliteTM PolycutTM Fibre
3M’s Regalite Polycut incorporates 3M Cubitronand premi-
um aluminum oxide minerals on a heavy YF cloth or fibre
backing.
45
18
3MTM 977F Regalloy Resin Bond Cloth
3MTM 963G RegalTM Resin Bond Cloth
YN Wt. Grades 2480
XFWt. Grades P100 and P120
3MTM 984C RegalTM Resin Bond Fibre
All 4"Products
3M’s Cubitron ceramic aluminum oxide on a polyester back-
ing for grinding and deburring carbon steel and aluminum.
3MTM 983C RegalTM Resin Bond Fibre
Grades 36, 60 and 80
Cubitron mineral coated on a 30 mil fibre backing for aggres-
sive applications where reduced edgewear and firm support is
desired.
Grade and UPC No.*
Min.
Size Prod. I.D. Pkg./Case 24 36 40 50 60 80 P100 P120
Roloc Discs
1"dia. 963G 50/500 11422 11428 11427 11425
11/2"dia. 963G 50/500 11450 11449 11448 11455 11454 11453
2"dia. 963G 50/200 11113 11112 11111 11110 11109 11107 11106
2"dia. 977F 50/200 83587 83588 83589
3"dia. 963G 50/200 11108 11105 11104 11103 11102 11101 11100
3"dia. 977F 50/200 83590 83591 83592
4"dia. 984C 25/100 83696 83697 83698 83699
Roloc TS Discs
1"dia. 963G 50/500
11/2"dia. 963G 50/500 82121
2"dia. 963G 50/200 82114 82118 82122 82126 82090
3"dia. 963G 50/200 82119 82123 82127
Roloc TP Discs
1"dia. 963G 50/500 82136
11/2"dia. 963G 50/500 82093
2"dia. 963G 50/200 82094
3"dia. 963G 50/200 82131 82135 82161 82142 82095
* Add Prefix 051144- to UPC No. when ordering.
Kut stock items
Grade and UPC No.*
Min.
Size Prod. I.D. Pkg./Case 24 36 40 50 60 80 P100
Roloc Discs
2"dia. 983C 50/200 22352 22353 22354
3"dia. 983C 50/200 22349 22350 22351
Roloc TS Discs
2"dia. 983C 50/200 82096 82098
3"dia. 983C 50/200 82097 82099 82101
Roloc TP Discs
2"dia. 983C 50/200
3"dia. 983C 50/200 82105
* Add Prefix 051144- to UPC No. when ordering.
47
46
19
3MTM 361FThree-M-iteTM Resin Bond Cloth
YFWt. Grades 24–150, XFWt. P180P320
General purpose grinding, blending and deburring on all met-
als: aluminum oxide on tough, polyester backing.
3MTM 461FTri-M-iteTM Resin Bond Cloth
YFWt.
Tri-M-ite Resin Bond Cloth Roloc Discs are silicon carbide
on a polyester backing for grinding glass, titanium and non-
ferrous materials.
Grade and UPC No.*
Min.
Size Prod. I.D. Pkg./Case 24 36 40 50 60 80 P100 P120 P150 P180 P240 P320
Roloc Discs
2"dia. 461F 50/200 12956 12954
3"dia. 461F 50/200 12958 12957 12955
* Add Prefix 051144- to UPC No. when ordering.
Kut stock items
Grade and UPC No.*
Min.
Size Prod. I.D. Pkg./Case 24 36 40 50 60 80 P100 P120 P150 P180 P240 P320
Roloc Discs
1"dia. 361F 50/500 11413 11412 11411 11417 11416 11415 11414
11/2"dia. 361F 50/500 11452 22396 11137 22397 22407 22408 22409
2"dia. 361F 50/200 11000 22398 22399 22400 22401 22402 22403 14559 13873 11419
3"dia. 361F 50/200 22392 22393 22394 22395 22404 22405 22406 82244 11418
4"dia. 361F 25/100 76429 11421 11420
Roloc TS Discs
1"dia. 361F 50/500 97669
11/2"dia. 361F 50/500 76789
2"dia. 361F 50/200 97680 76790 76794 97681
3"dia. 361F 50/200 97686 76791 76795 80051
Roloc TP Discs
1"dia. 361F 50/500 97691 76804 76808 77114
11/2"dia. 361F 50/500 82400 76809
2"dia. 361F 50/500 76798 82401 76802 76806 76810 77115 76778
3"dia. 361F 50/200 76799 82402 76803 76807 76811 77116
* Add Prefix 051144- to UPC No. when ordering.
48
49
20
RolocTM SE Surface Conditioning Discs
Scotch-Brite “SE” surface conditioning products feature a
coarser, tougher, more aggressive, abrasive impregnated web
construction than regular Scotch-Brite surface conditioning
products. Use for heavier deburring, cleaning and finishing
applications.
Grade Front Color Back Color
A CRS Brown Blue
A MED Maroon Blue
RolocTM Surface Conditioning Discs
Scotch-Brite Roloc discs provide a burr-free surface suitable
for painting or coating. These discs can also be used for
removal of light rust, oxides, and coatings.
Color: A VFN - Blue ACRS - Brown
A MED - Maroon S SFN - Gray
Compatability of RolocTM Disc Attaching System
3M Screw on Press on
(1/2 Turn off and on)
Roloc N/A Type III
Roloc+ N/A N/A
Roloc TP N/A Power Lock
Roloc TS Quick Change Type II
RolocTM RolocTM TS RolocTM TP
Mineral Type/Grade UPC No.
Max. Oper.
Size RPMs Discs/Case A CRS A MED
Roloc SE
2"x NH 25,000 200 048011-18081 048011-18471
3"x NH 18,000 25 048011-18082 048011-18472
4"x NH 12,000 25 048011-18243
Roloc TS SE
2"x NH 25,000 200 048011-18085
3"x NH 18,000 100 048011-18086
Roloc TP SE
2"x NH 25,000 200 048011-18083
3"x NH 18,000 100 048011-18084
Maximum Operating RPMs:
Do not exceed the MOS ratings of the holders used with
these Roloc products.
Accessories: See Roloc Disc Pads, pg. 23.
Mineral Type/Grade UPC No.
Max. Oper.
Size RPMs Discs/Case A CRS A MED A VFN S SFN
Roloc
1"x NH 30,000 200 048011-15393 048011-15392 048011-15391
11/2"x NH 30,000 200 048011-08764 048011-08765 048011-08766 048011-08767
2"x NH 25,000 200 048011-05528 048011-05527 048011-05523 048011-05522
3"x NH 18,000 100 048011-05532 048011-05531 048011-05530 048011-05529
4"x NH 12,000 100 048011-12954 048011-12953 048011-12952
Roloc TS
11/2"x NH 30,000 200 048011-13249 048011-13250 048011-13251
2"x NH 25,000 200 048011-13253 048011-13254 048011-13255 048011-13256
3"x NH 18,000 100 048011-13257 048011-13258 048011-13259 048011-13260
Roloc TP
2"x NH 25,000 200 048011-13237 048011-13238 048011-13239
3"x NH 18,000 100 048011-13241 048011-13242 048011-13243
50
28
51
21
EXLRolocTM Unitized Wheels
Roloc unitized wheels are strong, efficient products for edge
deburring and finishing. They perform well in a variety of
metal working applications and on intricate machined parts
where close tolerances are important. The Roloc, Roloc TS,
or Roloc+ holding systems make changing unitized wheels
quick and easy.
Wheel Color Lettering
8A CRS Tan Orange
8A MED Tan Orange
6A MED Tan Red
6S FIN Gray Green
2A MED Gray Black
2S FIN Gray Purple
Mineral Type/Grade UPC No.*
Max. Oper.
Size Wheels/Case RPMs 8 A CRS 8 A MED 6 A MED 6 S FIN 2 A MED 2 S FIN
EXL RolocUnitiz ed Wheels
2"dia. 60 22,100 17194 17192 17190 17187 17185 17183
3"dia. 40 15,100 17195 17193 17191 17189 17186 17184
EXL RolocTS Unitiz ed Wheels
2"dia. 60 22,100+17198 17848 17202 17846 17844 17842
3"dia. 40 15,100+17199 17849 17203 17847 17845 17843
* Add Prefix 048011- to UPC No. when ordering.
52
22
RolocTM Bristle Discs
3M Roloc Bristle Discs are ideal for safely cleaning and strip-
ping a wide variety of substances off of metal. The
3M Bristle Disc will easily cut through hardened enamel
paint, thick dried adhesive and layers of corrosion without
destroying the underlying metal or compromising your safety.
In addition, the 3M Bristle Disc does not clog-up with the
substances you are trying to remove, giving you a consistent
finish throughout the life of the disc. 3M Bristle Discs come
in sizes from 1 inch Rolocto 7 inch x 5/8-11 thread. For hard
to reach areas, try the 3 inch Radial 3M Bristle Disc. Most
3M Bristle Discs come in grades 50, 80 and 120.
Color: 50X - Green 80X - Yellow 120X - White
Mineral: RegaliteMineral
Grade and UPC No.
Trim Min. Max. Oper.
Size (T=Tapered) Pkg./Case RPM’s 50 80 120
1"dia. 5/8"20/80 30,000 048011-18698 048011-18706 048011-18710
2"dia. 1/2"10/40 25,000 048011-18537
5/8"T 10/40 25,000 048011-18730 048011-18732 048011-18733
3"dia. 1/2"10/40 18,000 048011-18535 048011-18538
5/8"T 10/40 18,000 048011-18734 048011-18736 048011-18737
4.5"dia. 5/8"-11 Thread 5/10 12,000 048011-24241 048011-24242 048011-24243
7"dia. 5/8"-11 Thread 5/5 6,000 048011-07577 048011-07578
RolocTM Bristle Discs Intr oductory Pack
Product Contents
982BS 2 ea. Roloc Bristle Disc, 2"x 1/2" trim,
50x, 80x, 120x
1 ea. Roloc Disc Pad Holder, 2", Hard
983BS 2 ea. Roloc Bristle Disc, 3"x 1/2" trim,
50x, 80x, 120x
1 ea. Roloc Disc Pad Holder, 3", Hard
982RS 3 ea. 3M 777F Roloc Discs, 2", 60YF,
80YF, 120YF
2 ea. Roloc Surface Conditioning
Discs, 2", ACRS, AMED, AVFN,
SSFN
2 ea. Roloc SE Surface Conditioning
Discs, 2", ACRS
1 ea. Roloc EXL Unitized Wheels, 2",
2SFIN, 6AMED, 8ACRS
2 ea. Roloc Bristle Disc,
2"x 5/8" tapered, 50x, 80x, 120x
1 ea. Roloc Disc Pad Holder, 2", Hard
983RS 3 ea. 3M 777F Roloc Discs , 3", 60YF,
80YF,
120YF 2 ea. Roloc Sur face Conditioning
Discs, 3", ACRS, AMED, AVFN,
SSFN
2 ea. Roloc SE Surface Conditioning
Discs, 3", ACRS
1 ea. Roloc EXL Unitized Wheels, 3",
2SFIN, 6AMED, 8ACRS
2 ea. Roloc Bristle Disc,
3"x 5/8" tapered, 50x, 80x, 120x
1 ea. Roloc Disc Pad Holder, 3", Hard
Product Packs/Case UPC No.
982BS 5 048011-18696
983BS 5 048011-18697
982RS 5 048011-18694
53
54
Maximum Operating RPMs:
The lower of the disc or the disc pad MOS rating must
always be used.
23
3MTM RolocTM TP
Disc Pads
For use with 3M TP
grinding discs and with
press on type abrasive
discs.
Max. Oper.
Diameter Hardness RPM’s UPC No.
1"Medium 30,000 051144-77723
11/2"Hard 30,000 051144-77725
11/2"Medium 30,000 051144-77726
11/2"Soft 30,000 051144-77727
2"Hard 25,000 051144-14198
2"Medium 25,000 051144-14197
2"Soft 20,000 051144-77732
3"Extra Hard 20,000 051144-77735
3"Hard 20,000 051144-14202
3"Medium 18,000 051144-14201
3"Soft 15,000 051144-77736
4"Medium 12,000 051144-77739
1/4"Threaded Shaft 051144-45102
Accessories – RolocTM Discs
Proper Speed Tool
Threaded Disc Roloc
Shaft Back-up Pad Disc
3MTM RolocTM Disc Pads
Rubber back-up pads are
available in different diame-
ters and degrees of hardness
for varying grinding applica-
tions. Pads are female thread-
ed to receive any standard 1/4"-
20 thread shaft.
Max. Oper.
Diameter Hardness RPM’s UPC No.
1"Medium 30,000 051144-45101
11/2"Hard 30,000 051144-45100
11/2"Medium 30,000 051144-45099
11/2"Soft 30,000 051144-45098
2"Extra Hard 25,000 051144-45097
2"Hard 25,000 051144-45096
2"Medium 25,000 051144-45095
2"Soft 20,000 051144-45094
3"Extra Hard 20,000 051144-45093
3"Hard 20,000 051144-45091
3"Medium 18,000 051144-45092
3"Soft 15,000 051144-45090
4" 5/8" -11 Hard 12,000 051144-83489
4"Medium 12,000 051144-45179
1/4"Threaded Shaft 051144-45102
3MTM RolocTM TS
Disc Pads
For use with 3M TS
grinding discs and
“screw on” abrasive
discs.
Max. Oper.
Diameter Hardness RPM’s UPC No.
1"Medium 30,000 051144-77724
11/2"Hard 30,000 051144-77728
11/2"Medium 30,000 051144-77729
2"Extra Hard 25,000 051144-77733
2"Hard 25,000 051144-14212
2"Medium 25,000 051144-14211
3"Extra Hard 20,000 051144-77737
3"Hard 20,000 051144-14216
3"Medium 18,000 051144-14215
3"Soft 15,000 051144-77738
4"Medium 12,000 051144-77740
1/4"Threaded Shaft 051144-45102
RolocTM Radial Bristle Discs
3M Radial Bristle Discs are abrasive-filled products with
unique features designed to increase productivity in the fol-
lowing applications:
Remove adhesive, paint and other coatings, discoloration,
heavy oxides, and surface contaminants.
Deburr and blend.
Clean and prepare surfaces before and after welding.
Flexible bristles conform to the part and clean without
removing base material reducing damage and rework. The
unique bristle pattern reaches tight or awkward areas such as
grooves and along 90° angles.
Grade and UPC No.
Trim Min. Max. Oper.
Size (T=Tapered) Pkg./Case RPM’s 50 80 120
3"dia. 10/40 25,000 048011-24276 048011-24277 048011-24278
55
24
Stainless
20,000 RPM
15,000 RPM
10,000 RPM
Additio nal Helpful Info rmation – Coated Abrasive RolocTM
Discs
Aluminum
20,000 RPM
15,000 RPM
10,000 RPM
Steel
30,000 RPM
20,000 RPM
15,000 RPM
Titanium
9,000 RPM
7,000 RPM
4,500 RPM
Glass
9,000 RPM
7,000 RPM
4,500 RPM
Composites
15,000 RPM
10,000 RPM
8,000 RPM
Optimum Tool Speeds (RPM’s) To Maximize RolocTM Coated Abrasive Disc
Cut Rates and Life.
Disc
Size
11/2"
2"
3"
Material Type
Compatibility of RolocTM Disc Attaching Systems
3M
(1/2Turn off and on)
Roloc
TP
TS
Press on
Type III
Power Lock
Type II
WARNING: Use with 3MRolocBack-up pads for safe, secure per-
formance. Non-3M back-up pads may have a deeper threaded cavi-
ty which causes the button to continue to tighten down during use.
This can cause the button to separate from the disc resulting
in disc fly off and potential operator harm.
Screw on
N/A
N/A
Quick Change
57 58
3M Back-up Pad Non 3M Back-up Pad
RolocTM + Holders & Button Combination
Packs
These combination packs contain one Roloc + Holder No.1
and one Roloc + Button No. 6 or 7.
Product Specifications
Product Use With
No. 1 and No. 6 Unitized Wheels 3"Diameter
and smaller x 1/8"wide x 3/8" CH
No. 1 and No. 7 Unitized Wheels 3" Diameter
and smaller x 1/4"wide x 3/8" CH
Product Sets/Case UPC No.
No. 1 and No. 6 5 048011-14916
No. 1 and No. 7 5 048011-14915
RolocTM + Buttons
These buttons thread into the
No.1 Roloc + Holder for use
with unitized wheels. They
offer this front-loading fea-
ture to allow for quick and
easy wheel change.
Maximum
Product Diameter Use With Oper. RPM
63/8"Unitized Wheels 25,000 w/11/2"dia.
1 1/2"- 3" dia. x 1/8"20,000 w/2"dia.
wide x 3/8" CH 15,000 w/3"dia.
73/8"Unitized Wheels 25,000 w/11/2"dia.
1 1/2"- 3"dia. x 1/4"20,000 w/2"dia.
wide x 3/8" CH 15,000 w/3"dia
Product Buttons/Case UPC No.
6 5 048011-15059
7 5 048011-15060
#6 Button is blue, #7 Button is red
56
25
3M Stikit products have a pressure sensitive adhesive backing
for press-on, peel-off convenience. This attachment system
eliminates slippage between the sander back-up pad and the
abrasive resulting in higher cut rates with fewer interruptions
for replacement of sandpaper.
3MTM 415U StikitTM Tri-M-iteTM Fre-CutTM
Paper AWt. Disc Rolls
Made from A weight Tri-M-iteFre-cut finishing paper,
which has a special coating that resists loading. General pur-
pose discs for wood, metal, and fiberglass sanding applica-
tions.
3MTM 214U StikitTM White Gold Paper AWt.
Disc Rolls
A premium aluminum oxide abrasive product with a special
coating that resists loading. This superior product is precisely
graded for an excellent finish. For paint, primer, wood, metal,
and fiberglass.
59
Grade and UPC No.
Prod. Min.
Size I.D. Pkg./Case 80 100 120 150 180 220 240 320 400
5"x NH 415U 125 roll/8 77223 77227 77230
250 roll/4 77234 77237 77241
214U 125 roll/10 81802 81803 81804
175 roll/6 81806 81808 81810 81812 81997 81996
5"x DF 415U 125 roll/8 77224 77228 77231
250 roll/4 77235 77238 77242
214U 125 roll/10 81805
175 roll/6 81807 81811
6"x NH 415U 125 roll/8 77225 77229 77232
250 roll/10 77236 77239 77243
214U 125 roll/8 86381 86389 86382
250roll/10 86383 86384 86385 86386 86387 86388
* Add Prefix 051144- to UPC No. when ordering.
StikitTM Disc Pads
These lightweight, shock-resistant pads have a tough vinyl
face that provides excellent disc adhesion yet allows quick,
easy disc removal. 5" and 6" discs have a maximum operat-
ing speed of 10,000 RPM and are designed for use on dual
action and random orbital sanders.
Diameter Thickness Thread Face Color Case Qty. Max. RPM UPC
5"3/4"5/16"-24 external Blue 10 10,000 051144-05575
5"3/4"5/16"-24 external Silver 10 10,000 051144-45215
5"3/4"5/16"-24 external Red 10 10,000 051144-81821
5"3/4"5/16"-24 external (soft) Blue 10 R/O only 051144-83211
5"11/4"5/16"-24 external (soft) Black 10 R/O only 051144-82178
5"3/4"5/8"-11 internal Red 10 10,000 051144-82189
5"11/16"5/8"-11 internal Red 1 9,000 051144-82655
6"5/16"6-Bolt holes OUS 5 10,000 051144-05697
6"3/4"5/16"-24 external Blue 10 10,000 051144-05576
6"3/4"5/16"-24 external Silver 10 10,000 051144-45216
StikitAbrasive Discs
26
PSADiscs
PSA (pressure sensitive adhesive) Discs provide a fast, effi-
cient method for deburring, blending and cleanup on hard-to-
get-at areas. Adhesive-backed PSA Discs adhere and remove
quickly and easily to speed disc change time.
Use 3M PSA discs for all kinds of work. These tough fast-
cutting discs resist loading and shelling under severe operat-
ing conditions.
Grade and UPC No.*
Prod. Min.
Size I.D. Pkg./Case 24 36 40 50 60 80 100 120 150 180 240 320
1/2"248D 50/500 97632 97633 97634 20951 20950 20949 20948 97635 97636 97637 97638
3/4"248D 50/500 97639 97640 97641 20943 20942 20941 20940 97642 20939 20938 97643
1"248D 50/500 20936 97644 20934 20933 20932 20931 20930 20928 20927 97645
11/2"248D 50/500 97646 20923 20922 20921 20920 20919 97647 20917 20916 97648
2"248D 50/200 20913 20912 20911 20910 20909 20908 20907 20906 20905 20903
2"218K 50/200 20732
3"248D 50/200 01338 01337 01335 01334 01333 01332 01331 01330 01329 01328 01326 01306
4"248D 50/200 20900 21499 20899 20898 20897 20896 97649 97650 97651 97652 97653
5"248D 50/250 20891 20890 20889 20888 20887 20886 20885 20884 20883 20881 97654
6"248D 50/250 21639 21731 20879 20878 20877 20876 21497 97655 21496 97656
8"248D 50/250 20874 20873 20872 20871 20870 20869 20868 20867
9"248D 50/250 97657 97658 97659 20866 20865 97660 97661
10"248D 10 49536 49537 49538 49689 49688 49539 49540
12"248D 10 88906 88905 88904 88903 88902 88901 88900 88899
15"248D 10 88895 88894 88893 88892 88891 49692
16"248D 10 88890 88889 88888 88887 88886
18"248D 10 88882 88881 49691 88880 88879
20"248D 10 88878 88877 88876 88875 88874 49690
24"248D 10 20802 20801 20800 20799 20798 97665
30"248D 10 20793 20792 97666 20791 97668
Add Prefix 051111- to UPC No. when ordering 10" size.
* Add Prefix 051144- to UPC No. when ordering all other sizes.
Kut stock items
3MTM Three-M-iteTM Resin Bond PSA
Aluminum oxide resin bond cloth PSA (pressure sensitive
adhesive) discs provide a fast, efficient method for deburring,
blending and cleanup.
60
27
Grade and UPC No.*
Min.
Size Prod. I.D. Pkg./Case 36 40 50 60 80 100 120 150 180 240 320
12"778F 10 88869 88873 88872 88871 88870
* Add Prefix 051144- to UPC No. when ordering.
3MTM 778F RegaliteTM PolycutTM Resin Bond
Cloth PSAYF Wt.
A tough, durable blend of 3M’s Cubitron mineral and alu-
minum oxide and a grinding aid.
Accessories – PSADiscs
3MTM PSADisc Holders
Disc holders are used with any electric or air grinding tool
that accommodates an 1/4"shank.
Diameter and Shank Max RPM
s
UPC No.
1/2"x 1/4"20,000 051144-45074
3/4"x 1/4"20,000 051144-45073
1"x 1/4"20,000 051144-45072
11/2"x 1/4"20,000 051144-45071
2"x 1/4"15,000 051144-45070
3"x 1/4"10,000 051144-05510
4"x 1/4"7,500 051144-45069
5"x 1/4"6,000 051144-45068
62
61
28
Surface
Conditioning Discs
Surface conditioning discs and Roloc discs and wheels can be
used on right angle grinders and die grinders.
Surface Conditioning Discs
(Hook and Loop)
Scotch-Brite Surface Conditioning Discs are best for finish-
ing, cleaning and light deburring on flat metal surfaces. Used
on right angle (high speed and low speed), orbital, and dual
action power hand tools.
Color: A CRS - Brown A VFN - Blue
A MED - Maroon S SFN - Gray
3M Disc
Holder
(Hook
and loop)
Surface
Conditioning
Disc
Proper Speed Tool
Hook and Loop System
Mineral Type/Grade UPC No.
Size Discs/Case A CRS A MED A VFN S SFN
11/2"x NH 200 048011-04118 048011-04122 048011-04275 048011-04126
2"x NH 200 048011-07458 048011-07459 048011-04276 048011-04127
3"x NH 100 048011-04120 048011-04124 048011-04277 048011-04128
4"x NH 100 048011-07450 048011-007451 048011-04278 048011-04129
41/2"x NH 50 048011-14101 048011-14100 048011-14099 048011-14102
5"x NH 50 048011-00750 048011-00643 048011-04303 048011-00647
5"x 7/8"50 048011-16047 048011-00644
6"x NH 50 048011-03927 048011-03928 048011-04304
7"x NH 25 048011-00751 048011-00645 048011-04305 048011-00648
8"x NH 25 048011-00752 048011-00670 048011-04306 048011-00649
Maximum Operating RPMs:
11/2"dia. – 25,000 5" dia. – 10,000
2" dia. – 23,000 6" dia. – 8,000
3" dia. – 20,000 7" dia. – 6,000
4" dia. – 13,000 8" dia. – 6,000
41/2" dia. – 13,000
The lower of the disc or the disc pad MOS rating must
always be used. See pg. 32.
Accessories: See 3M Disc Pad Holders (Hook and Loop) on
pg. 32.
64
63
29
SE Surface Conditioning Discs
(Hook and Loop)
“SE” Surface Conditioning Discs feature a coarser, tougher
more aggressive web construction than our regular surface
conditioning discs for heavier deburring, cleaning and finish-
ing applications.
Color: A CRS - Brown A VFN - Blue
A MED - Maroon S SFN - Gray
Maximum Operating RPMs:
11/2"dia. – 25,000 5" dia. – 10,000
2" dia. – 22,000 6" dia. – 8,000
3" dia. – 18,000 7" dia. – 6,000
4" dia. – 13,000 8" dia. – 6,000
41/2" dia. – 13,000
The lower of the disc or the disc pad MOS rating must
always be used. See pg. 32.
Accessories: See 3M Disc Pad Holders (Hook and Loop) on
pg. 32.
Coating Removal Discs (Hook and Loop)
The Coating Removal Disc features our popular Clean and
Strip web for right angle tools. This rugged open web is virtu-
ally non-loading to make surface preparation faster and easier.
Aggressively tackles your toughest cleaning jobs.
Mineral Type/Grade UPC No.
Size Discs/Case SXCS
4"x NH 40 048011-18481
41/2" x NH 40 048011-18482
5"x NH 40 048011-18483
7"x NH 20 048011-18485
Recommended Operating RPMs:
4"dia. – 5,000–8,000 5"dia. – 4,200–6,300
41/2"dia. – 4,700–7,000 7"dia. – 3,000–4,500
Mineral Type/Grade UPC No.
Size Discs/Case A CRS A MED A VFN S SFN
2"x NH 200 048011-18473
3"x NH 100 048011-18474
4"x NH 100 048011-18021 048011-18475
41/2"x NH 50 048011-18079 048011-18476
5"x NH 50 048011-18080 048011-18919
6"x NH 50 048011-19658
7"x NH 25 048011-17866 048011-18477
8"x NH 25 048011-17239
66
65
30
Clean & Strip Discs
Handle tough cleaning and stripping jobs with an extra
coarse, open web. Designed to work faster and safer than
wire brushes.
Scotch-Brite Clean & Strip discs are surface conditioning
web cut into circular discs to the customers diameter and
center hole specifications. Discs can be used single or multi-
ple loaded onto a spindle and used on edge.
Applications: Stripping paint from metal surfaces, inspecting
welds, removing coatings and preparing surfaces for recoat-
ing, cleaning concrete molds and forms, general plant mainte-
nance.
Color: Black
Mineral Type/Grade UPC No.
Max. Oper.
Size Discs/Case RPMs S XCS
2 x 1/4"100 12,000 048011-00931
3 x 1/4"50 8,500 048011-00935
3 x 1/2"50 8,500 048011-00937
4 x 1/4"25 6,000 048011-07460
4 x 3/8"25 6,000 048011-00940
4 x 1/2"25 6,000 048011-00941
4 x 5/8"25 6,000 048011-00942
5 x 1/2"25 5,000 048011-00943
6 x NH 15 4,000 048011-00945
6 x 1/4"15 4,000 048011-00946
6 x 3/8"15 4,000 048011-00947
6 x 1/2"15 4,000 048011-00948
6 x 5/8"15 4,000 048011-00949
6 x 7/8"15 4,000 048011-00950
7 x 5/8"15 3,500 048011-00954
7 x 7/8"15 3,500 048011-00955
8 x 1/2"15 3,000 048011-00957
8 x 5/8"15 3,000 048011-00958
Mandrel
No. 933 or 934
Disc
Proper Speed Tool
67
31
Mandrel No. 933 Mandrel No. 934
High Strength Discs
MED:
Very conformable. For fin-
ishing using bench motors,
horizontal grinders or drill
motors.
Applications: Antique fin-
ishing or highlighting, satin
finishing aluminum extru-
sions, oxide and light coating
removal, stainless steel fin-
ishing.
Color: T ype AMaroon
VFN:
Designed for light deburring
work. A built-in lubricant
provides longer life. Very
conformable and excellent
for finer antique finishing.
Applications: Light gear
deburring, keyway and
o-ring slot edge radiusing,
antique finishing builders
hardware.
Color: T ype AMaroon
Type S – Brown
Mineral Type/Grade UPC No. Max. Oper.
Size Discs/Case RPMs A MED A VFN S VFN
6 x 1/4"100 4,000 048011-00666 048011-16777
6 x 1/2"100 4,000 048011-04188 048011-00665 048011-16778
8 x 1/4"50 3,000 048011-00673
8 x 1/2"50 3,000 048011-03992 048011-00672 048011-16780
8 x 3/4"50 3,000 048011-05304
Product Mandrels/Case UPC No.
933 5 048011-13968
934 1 048011-04021
Maximum Operating RPMs:
933 14,000
934 w/3"wheel - 12,000
w/4"wheel - 8,500
w/6"wheel - 6,000
The lower of the disc or mandrel MOS must always be used.
69 70
3M Mandrels
Mandrels are corrosion protected and machined to industrial
standards for thread size and shaft diameters. Furnished com-
plete with washers to fit available disc sizes.
Product Use With Size
933 2"-3"dia. discs 2"lg x 1/4"shank
1"washer
934 3"-6"dia. discs 31/16"lg x 1/4"shank
21/2"washer
68
32
3MTM Disc Pad Holders (Hook and loop)
For use with Surface Conditioning Discs
Disc Pad Holder No. 905
Disc Pad Holder No. 917
Disc Pad Holder No. 922
Hub- Max. Oper. Pads/
Product Dia. Shank RPMs Case UPC No.
9215 11/2"1/4"M 25,000 10 048011-04130
922 2"1/4"M 23,000 10 048011-07494
923 3"1/4"M 20,000 10 048011-04132
924 4"1/4"M 13,000 5 048011-07492
914 4"1/2"-13 F 13,000 1 048011-05673
914 4"5/8"-11 F 13,000 1 048011-05674
914 4"M14 - 2.0 F 13,000 1 048011-05677
9145 41/2"1/2"-13 F 13,000 1 048011-14110
9145 41/2"5/8"-11 F 13,000 1 048011-14111
9145 41/2"M10-1.25 F 13,000 1 048011-14112
9145 41/2"M14 - 2.0 F 13,000 1 048011-14114
905 5"5/16"-24 M 10,000 1 048011-09448
915 5"1/2"-13 F 10,000 1 048011-05679
915 5"5/8"-11 F 10,000 1 048011-05680
915 5"M14 - 2.0 F 10,000 1 048011-05681
906 6"5/16"-24 M 8,500* 1 048011-09449
916 6"5/8"-11 F 10,000 1 048011-05682
917 7"5/8"-11 F 6,000 1 048011-09450
918 8"5/8"-11 F 6,000 1 048011-09451
945 5"5/16"-24 M 12,000 1 051144-13625
947 7"5/8"-11 F 6,000 1 051144-13627
947M 7"M14 - 2.0 F 6,000 1 051131-07394
* 10,000 on Random Orbital Sanders
Accessories – Surface Conditioning Discs & Intro. Packs
RolocTM+ Holders
This holder is made of durable plastic for less critical grind-
ing and surface conditioning applications. Use with EXL
Roloc Unitized Wheels.
Max.
Oper. Holders/
Product Dia. Use With RPMs Case UPC No.
11"EXL Roloc 25,000 5 048011-15408
Unitized
Wheels
21
1/2"11/2"diameter 25,000 5 048011-15409
Roloc Discs
32"2"diameter 25,000 5 048011-15410
Roloc Discs
43"3"diameter 20,000 5 048011-15411
Roloc Discs
See page 19 for additional information.
Introductory Packs
Convenient introductory packs of Scotch-Brite Surface
Conditioning Discs, Roloc Surface Conditioning Discs, EXL
Wheels, Coating Removal Discs and holders. An easy way to
evaluate the right product, size and grade for your applica-
tions.
Product Contents
914S Surface Conditioning Disc - 4"Dia.
1 ea. S SFN (Gray)
1 ea. A VFN (Blue)
1 ea. A MED (Maroon)
1 ea. A CRS (Brown)
Disc Pad Holder (Hook and Loop)
1 ea. 914 5/8"-11
914CS Coating Removal Disc - 4"Dia.
1 ea. S-XCS (Black)
Disc Pad Holder (Hook and Loop)
1 ea. 914 5/8"-11
9145S Surface Conditioning Disc - 4 1/2"Dia.
1 ea. S SFN (Gray)
1 ea. A VFN (Blue)
1 ea. A MED (Maroon)
1 ea. A CRS (Brown)
Disc Pad Holder (Hook and Loop)
1 ea. 9145 5/8"-11
9145CS Coating Removal Disc - 41/2"Dia.
1 ea. S-XCS (Black)
Disc Pad Holder (Hook and Loop)
1 ea. 9145 5/8"-11
915S Surface Conditioning Disc - 5"Dia.
1 ea. S SFN (Gray)
1 ea. A VFN (Blue)
1 ea. A MED (Maroon)
1 ea. A CRS (Brown)
Disc Pad Holder (Hook and Loop)
1 ea. 915 5/8"-11
915CS Coating Removal Disc - 5"Dia.
1 ea. S-XCS (Black)
Disc Pad Holder (Hook and Loop)
1 ea. 915 5/8"-11
917S Surface Conditioning Disc - 7"Dia.
1 ea. S SFN (Gray)
1 ea. A VFN (Blue)
1 ea. A MED (Maroon)
1 ea. A CRS (Brown)
Disc Pad Holder (Hook and Loop)
1 ea. 917 5/8"-11
917CS Coating Removal Disc - 7"Dia.
1 ea. S-XCS (Black)
Disc Pad Holder (Hook and Loop)
1 ea. 917 5/8"-11
920S Surface Conditioning Discs -2"Dia.
2 ea. S SFN (Gray)
2 ea. A VFN (Blue)
4 ea. A MED (Maroon)
4 ea. A CRS (Coarse)
Surface Conditioning Discs - 3"Dia.
2 ea. S SFN (Gray)
2 ea. A VFN (Blue)
4 ea. A MED (Maroon)
4 ea. A CRS (Brown)
Disc Pad Holders (Hook and Loop)
1 ea. 922 1/4"Collet
1 ea. 923 1/4"Collet
M= Male threaded
F = Female threaded
71
72
73
33
Introductory Packs (Continued)
Product Contents
9815S 777F Regalite Polycut RB Cloth Roloc
Discs 11/2"Dia.
3 ea. 60YF
3 ea. 80YF
3 ea. P120YF
Roloc Surface Conditioning Discs 11/2"Dia.
2 ea. S SFN (Gray)
2 ea. A VFN (Blue)
2 ea. A MED (Maroon)
2 ea. A CRS (Brown)
Roloc Disc Pad 11/2"Dia.
1 ea. Hard
1 ea. 1/4"Threaded Shaft
982S 777F Regalite Polycut RB Cloth Roloc
Discs 2"Dia.
3 ea. 60YF
3 ea. 80YF
3 ea. P120 YF
Roloc Surface Conditioning Discs 2"Dia.
2 ea. S SFN (Gray)
2 ea. A VFN (Blue)
2 ea. A MED (Maroon)
2 ea. A CRS (Brown)
Roloc Disc Pad 2"Dia.
1 ea. Hard
1 ea. 1/4"Threaded Shaft
983S 777F Regalite Polycut RB Cloth Roloc
Discs 3"Dia.
3 ea. 60YF
3 ea. 80YF
3 ea. P120YF
Roloc Surface Conditioning Discs 3"Dia.
2 ea. S SFN (Gray)
2 ea. A VFN (Blue)
2 ea. A MED (Maroon)
2 ea. A CRS (Brown)
Roloc Disc Pad 3"Dia.
1 ea. Hard
1 ea. 1/4"Threaded Shaft
984WS 984C Regal Resin Bond Fibre Roloc
Discs 4"Dia.
1 ea. 36
1 ea. 50
1 ea. 60
1 ea. 80
Roloc Surface Conditioning Discs 4"Dia.
1 ea. A VFN (Blue)
1 ea. A MED (Maroon)
1 ea. A CRS (Brown)
Roloc SE Surface Conditioning Disc 4"Dia.
1 ea. A CRS (Brown/Blue)
Roloc Disc Pad 4"x 5/8"– 11
1 ea. hard
785SS 785C Regalite Polycut Resin Bond Fibre Roloc
Discs 4"Dia.
1 ea. 36
1 ea. 50
1 ea. 60
1 ea. 80
1 ea. 100
1 ea. 120
Roloc Surface Conditioning Discs 4"Dia.
1 ea. A VFN (Blue)
1 ea. A MED (Maroon)
1 ea. A CRS (Brown)
Roloc SE Surface Conditioning Discs 4"Dia.
1 ea. A CRS (Brown/Blue)
Roloc Disc Pad 4"x 5/8"– 11
1 ea. hard
Product Contents
985S Roloc Surface Conditioning Discs - 2"Dia.
2 ea. S SFN (Gray)
2 ea. A VFN (Blue)
2 ea. A MED (Maroon)
2 ea. A CRS (Brown)
Roloc Surface Conditioning Discs - 3"Dia.
2 ea. S SFN (Gray)
2 ea. A VFN (Blue)
2 ea. A MED (Maroon)
2 ea. A CRS (Brown)
Roloc Disc Pads
1 ea. 2"Medium
1 ea. 3"Medium
2 ea. 1/4"Threaded Shaft
987S EXL Roloc Unitized Wheel - 2"Dia
1 ea. 2S FIN
1 ea. 2A MED
1 ea. 6S FIN
1 ea. 6A MED
1 ea. 8A MED
1 ea. 8A CRS
Roloc+ Holder
1 ea. No. 1
988S EXL Roloc Unitized Wheel - 3"Dia.
1 ea. 2S FIN
1 ea. 2A MED
1 ea. 6S FIN
1 ea. 6A MED
1 ea. 8A MED
1 ea. 8A CRS
Roloc+ Holder
1 ea. No. 1
Product Packs/Case UPC No.
914S 5 048011-08707
914CS 5 048011-18428
9145S 5 048011-14105
9145CS 5 048011-18427
915S 5 048011-08713
915CS 5 048011-18426
917S 5 048011-04270
917CS 5 048011-18430
920S 5 048011-18253
9815S 5 051144-82901
982S 5 051144-82899
983S 5 051144-82900
984WS 5 051144-83490
785SS 5 051144-83491
985S 5 048011-18254
987S 5 048011-17181
988S 5 048011-17182
34
Belts – Bench Top
For bench top or bench area sanding and grinding, 3M offers
products to make your work go fast and easy with superior
results.
Grade and UPC No.*
Min.
Size Prod. I.D. Pkg./Case 36 50 60 80 P120
2"x 60"777F 10/50 77663
2"x 60"777F 25/50 77152
2"x 72"777F 10/50 76531 76523
2"x 72"777F 25/50 80286 14884 81767
31/2"x 151/2"777F 10/50 #77336 #77334 #77476 #77333
6"x 48"777F 10/20 82313 80176
6"x 48"777F 20 76679 76733 82153
31/2"x 1 51/2"707E 10/50 80246
* Add Prefix 051144- to UPC No. when ordering.
Filmlok
# Fabrilok
3MTM 777F RegaliteTM PolycutTM Resin
Bond Cloth YFWt.
3M 777F Regalite Polycut Resin Bond Cloth combines
superb performance with long life to bring quality and econo-
my to a variety of operations. It grinds cool with a high cut
rate to deliver the finish you’re looking for.
The product is a combination of 3M Cubitron mineral and
special aluminum oxide mineral coated on a firm Y wt. syn-
thetic backing. It also incorporates a grinding aid to provide
optimum performance on stainless steel and nickel alloy off-
hand and medium pressure grinding applications.
3MTM 707E RegaliteTM PolycutTM Resin Bond
Cloth JE Wt.
3M 707E Regalite Polycut Resin Bond Cloth provides a
smooth, cool, fast cut that you can depend on for high-quality
results.
3M 707E incorporates a blend of 3M Cubitron mineral and
aluminum oxide minerals and grinding aid on a very flexible
J weight synthetic backing.
Ideal for a wide range of applications requiring conformabili-
ty on a variety of materials, such as stainless steel and high
nickel alloys.
74
75
35
Grade and UPC No.*
Prod. Min.
Size I.D. Pkg./Case 24 36 40 50 60 80 100 120 150 180 220 240 320 400
11/2"x 60"241D 10/50 #26443 26441 26440
11/2" x 60"241D 25/100 26438 26436 26435 26434 26433 26431 26430
2" x 60"241D 10/50 26426 26425 26424
2" x 60"241D 25/50 33640 33639 26420 33667 33638 33637 26415 33636
2" x 72"241D 10/50 26320 #26317
2" x 72"241D 25/50 26316 33067 26313 26312 76336 26309 26307 81752 26305 11658
21/2" x 60"241D 10/50 26408 26405 26404
21/2" x 60"241D 25/50 #26400 26396 33635 26388 26386 26385 26383 26382
6" x 48"241D 10/20 26533 26531 26529 #11645
6" x 48"241D 20 26524 26521 26519 26518 26517 26515 26514 26513 26512
4" x 27"240D 10/50 27447
* Add Prefix 051144- to UPC No. when ordering.
Filmlok
# Fabrilok
Kut stock items
3MTM 241D Three-M-ite TM Resin Bond Cloth
X Wt.
3M’s standard aluminum oxide X-weight cloth.
3MTM 240D Three-M-ite TM Resin Bond Cloth
Open Coat X Wt.
An aluminum oxide, resin bonded open coat construction on
an X-weight drills cloth backing, exhibiting greater flexibility
than the closed coat version.
76
36
Grade and UPC No.*
Prod. Min.
Size I.D. Pkg./Case 36 40 50 60 80 100 P120
1/4"x 24"741E/751E 50/200 #13280
1/2"x 12"741E 50/200 #13276
1/2"x 18"777F 50/200 #80551 #80232
741E 50/200 #13733
1/2"x 24"777F 50/200 #77643 #77408 #77065 #77491 #81064
741E/751E 50/200 #13272
3/4"x 201/2"741E 50/200 #13268
1"x 30"777F 50/200 #82252 #77407
741E/751E 50/200
1"x 42"777F 50/200 76527 77512 Grade and UPC No.*
Prod. Min.
Size I.D. Pkg./Case 36 40 50 60 80 100 120 150 180 220 240 320
1/8"x 24"241E 50/200 #71053
1/4"x 24"241E/251E 50/200 #30290 #26733 #26732 #32407 #26731 #26730 #26729
1/2"x 12"241E/251E 50/200 #32417 #26895 #31170 #26894 #26893 #26892 #31074 #32398
1"x 12"241D 50/200 26884 26881
1/2"x 18"241E/251E 50/200 #77632 #72226 #72227 #72228 #14754 #72229
1/2"x 24"241E/251E 50/200 #32375 #26726 #26725 #26723 #26720 #26719 #26717 #26716 #26715 #26714 #32399 #26713
1/2"x 42"241E 50/200 #34176
3/4"x 201/2"241E/251E 50/200 #26784 #26783 #26782 #26781 #26780 #26779 #26778 #26776
1"x 30"241E/251E 50/200 #32161 #33911 #33912 #32157 #32158 #32160
1"x 42"241E 50/200 32090
241D 50/200 #26614 #26612 #31823 #26609 31774 26606 33795 26602 26601 26600 26599 26597
240D
11/2"x 1815/16"241D 10/50 26822 26820 26819 26818 26816 26814
* Add Prefix 051144- to UPC No. when ordering.
Filmlok
# Fabrilok
Kut stock items
Deburring Belts –
Portable Tool
3M offers a complete line of coated abrasive belt constructions
to meet all of your grinding, deburring and sanding needs.
3MTM 777F RegaliteTM PolycutTM
Resin Bond Cloth YFWt.
The product is a combination of 3M CubitronTM mineral and
special aluminum oxide minerals coated on a firm Y wt. syn-
thetic backing. It also incorporates a grinding aid to provide
optimum performance on stainless steel and nickel alloy off-
hand and medium pressure grinding applications.
3MTM 741E RegaliteTM Resin Bond Cloth
XE Wt.
3MTM 751E RegaliteTM Resin Bond Cloth
XE Wt.
Unique combination of Cubitron & aluminum oxide miner-
als on strong rayon backing.
3MTM 241E Three-M-iteTM Resin Bond Cloth
XE Wt. Grades 50 and Finer
3MTM 251E Three-M-iteTM Resin Bond Cloth
Type HO XE Wt. Grades 36 and 40
A high performance aluminum oxide mineral coated on a
firm synthetic backing, providing superior aggressiveness
and edge wear resistance.
3MTM 240D Three-M-ite TM Resin Bond Cloth
Open Coat X Wt.
3MTM 241D Three-M-ite TM Resin Bond Cloth
X Wt.
Aluminum oxide X-weight cloth.
77
37
Belts – Portable
The product selection for portable belts ranges from our stan-
dard aluminum oxide to our premium 761D product, which is
a blend of 3M's proprietary Cubitron mineral and premium
aluminum oxide. These belts deliver a fast cut which means a
time savings for you!
Grade and UPC No.**
* Prod. Min.
Size I.D. Pkg./Case 50 60 80 P100 P120 P150
3"x 18"761D 5/25 81393 81394 81395 81396 81397 81398
3"x 21"761D 5/25 81399 81400 81401 81402 81403 81404
3"x 24"761D 5/25 81410 81411 81412 81413 81414 81415
4"x 24"761D 5/25 81429 81430 81431 81432 81433 81434
Grade and UPC No.** ***
Prod. Min.
Size I.D. Pkg./Case 24 36 40 50 60 80 100
3"x 18"241D*** 10/40 01416-3 01417-0 01419-4 01420-0
120 150 180 220 240 320
01421-7
24 36 40 50 60 80 100
240D 10/50 71512 30639
120 150 180 220 240 320
71785
24 36 40 50 60 80 100
3"x 21"241D*** 10/40 02679-1 01422-4 01423-1 01424-8 01425-5 01426-2 01427-9
120 150 180 220 240 320
01428-6 01528-3 01529-0 02689-0
24 36 40 50 60 80 100
240D/240A 10/50 27501 27500 27499 27498 27497 27496
120 150 180 220 240 320
27495 32943
24 36 40 50 60 80 100
441D 10/50 120 150 180 220 240 320
* The color purple is a trademark of 3M.
Kut stock items
3MTM 761D Y Wt.
The new 3M 761D portable belts are a revolutionary step in
the advancement of coated abrasive belt sanding for portable
belt applications.
3MTM 241D Three-M-ite TM RB Cloth X Wt.
3M’s standard aluminum oxide X-weight cloth.
3MTM 240D/240AThree-M-iteTM RB Cloth
Open Coat X Wt.
An aluminum oxide, resin bonded open coat construction on
an X-weight drills cloth backing, exhibiting greater flexibility
than the closed coat version.
3MTM 441D Three-M-ite TM RB Cloth X Wt.
Silicon carbide mineral coated on a cloth backing.
78
38
Portable Sander Belts (Continued)
Grade and UPC No.** ***
Prod. Min.
Size I.D. Pkg./Case 24 36 40 50 60 80 100
3"x 233/4"241D*** 10/40 02645-6 26740-8 02648-7
120 150 180 220 240 320
24 36 40 50 60 80 100
240D/240A 10/50 27483 27481 27480 27479
120 150 180 220 240 320
27478
24 36 40 50 60 80 100
3"x 24"241D*** 10/40 02681-4 01429-3 01430-9 01431-6 01432-3 01433-0 01434-7
120 150 180 220 240 320
01435-4 01536-8 02657-9 02659-3
24 36 40 50 60 80 100
240D/240A 10/50 27477 27476 27475 27474 27473 27472 27471
120 150 180 220 240 320
27470 27469 27468 71521
24 36 40 50 60 80 100
441D 10/50 120 150 180 220 240 320
24 36 40 50 60 80 100
31/2"x 151/2"241D*** 10/40 77290-2 26860-3 02661-6 26858-0 26857-3 26856-6 26853-5
120 150 180 220 240 320
02663-0 26851-1 02665-4
24 36 40 50 60 80 100
4"x 21"241D 10/40 01575-7
120 150 180 220 240 320
24 36 40 50 60 80 100
240D 10/50 31412 27494 27493
120 150 180 220 240 320
74349
24 36 40 50 60 80 100
4"x 213/4"241D*** 10/40 02669-2
120 150 180 220 240 320
02677-7
24 36 40 50 60 80 100
240D 10/50 27489 27488 27487 27486
120 150 180 220 240 320
27485
24 36 40 50 60 80 100
4"x 24"241D*** 10/40 02685-2 01436-1 01437-8 01438-5 01439-2 01440-8 01441-5
120 150 180 220 240 320
01442-2 01539-9
24 36 40 50 60 80 100
240D/240A 10/50 27467-3 27466-6 27465-9 27464 27463 27462 27461
120 150 180 220 240 320
27460 27459-8 27458
** For Product I.D. 240A, 240D and 441D, add prefix 051144- to UPC number when ordering.
*** For Product I.D. 241D, add prefix 078-91040- to UPC number when ordering.
Add prefix 051144- to UPC number when ordering.
Add prefix -078 to UPC number when ordering.
Kut stock items
39
Scotch-BriteTM
Surface
Conditioning
Scotch-Brite surface conditioning belts are used worldwide to
finish, polish and buff metal, wood and plastic surfaces.
Recommended operating speeds:
Generally, low speeds are recommended for generating very
uniform satin finishes, finishing aluminum alloys without
lubricants, and woodworking applications. Higher speeds are
recommended when removing imperfections prior to buffing.
High belt speed will result in faster cut along with finer fin-
ishes.
Polishing: fewer steps
Scotch-Brite surface conditioning belts refine rough surfaces
with little or no dimensional change to the workpieceand
they can finish the job in fewer steps than conventional prod-
ucts, while generating a uniform scratch pattern.
Grindline conditioning: fast and easy
Grindlines, milling marks or microburrs left by cutting tools
or other abrasives can be quickly and easily conditioned with
Scotch-Brite belts, leaving a consistent and burr-free surface.
The belts will also blend scratches and blemishes so they
won’t show through most paint systems. Surfaces conditioned
with Scotch-Brite belts are easy-to-clean and easy-to-coat,
reducing production steps and costs.
Satin Finishing: quick and consistent
With Scotch-Brite belts on your automatic equipment or
portable power tools, you can quickly produce consistent
satin finishes on a variety of metals. And using Scotch-Brite
belts in tandem with 3M coated abrasive discs and belts on
stainless steel, you can match #3 and #4 finishes.
79
81
80
Application Recommended SFPM
Decorative Finishing 500-3,000 SFPM
Wood Sanding 1,200-2,700 SFPM
Deburring 5,000-6,500 SFPM
Cleaning and Conditioning 2,000-5,000 SFPM
Oxide Removal 4,500-6,500 SFPM
SFPM = Surface Feet Per Minute
40
Mineral Type/Grade UPC No.
Size Belts/Case A CRS A MED A VFN S SFN T
1/4"x 18"20 048011-13290 048011-14276
1/4"x 24"20 048011-13132 048011-13131 048011-13287
1/2"x 12"20 048011-17515 048011-19688
1/2"x 18"20 048011-08858 048011-08857 048011-08856 048011-08855
1/2"x 24"20 048011-05741 048011-03998 048011-04299 048011-17516
3/4"x 18"20 048011-13639 048011-15899 048011-14543 048011-15898
1"x 18"10 048011-14278 048011-14398 048011-17517
1"x 30"10 048011-08887 048011-08898 048011-08920
1"x 42"10 048011-04189 048011-04190
2"x 1815/16"10 048011-08889
2"x 34"10 048011-08905
2"x 48"10 048011-08915 048011-04295
2"x 60"10 048011-05020 048011-08916 048011-08922
2"x 72"10 048011-00580 048011-00579
2"x 132"5 048011-05021 048011-03999 048011-04297
21/2"x 60"10 048011-00581
23/4"x 151/2"10 048011-05022 048011-05227
3"x 1011/16"10 048011-05820 048011-05783 048011-09650
3"x 18"10 048011-14284 048011-14285 048011-14550
3"x 21"10 048011-08906
3"x 24"10 048011-08880 048011-00583 048011-04298
3"x 72"10 048011-14548
3"x 132"5 048011-05023 048011-00568 048011-04289 048011-08893
31/2"x 151/2"10 048011-05016 048011-05228 048011-05643 048011-05644 048011-14121
4"x 24"10 048011-00585
4"x 90"10 048011-15879
4"x 132"5 048011-05018 048011-00570 048011-04281
4"x 168"5 048011-00589
6"x 48"5 048011-05019 048011-00590 048011-04283
SE
1/4"x 18"20 048011-18495
1/4"x 24"20 048011-18496
1/2"x 18"20 048011-18087 048011-18480
1/2"x 24"20 048011-18088 048011-18479
3/4"x 18"20 048011-19697
31/2"x 151/2"10 048011-18089 048011-18478
Surface Conditioning Belts
A reinforced non-woven nylon material spliced into belt
form provides a more consistent, more appealing finish in
decorative finishing applications. Resists loading and reduces
heat build-up, increasing life and improving performance.
Designed for cleaning, finishing and light deburring opera-
tions using standard abrasive belt equipment.
A VFN - Blue A CRS - BROWN
A MED - Maroon S SFN - Gray
SE Surface Conditioning Belts
New Scotch-Brite brand “SE” surface conditioning products
feature a more aggressive mineral in this non-woven nylon
abrasive impregnated web construction than regular Scotch-
Brite surface conditioning belts.
Front Color Back Color
A CRS Brown Blue
A MED Maroon Blue 82
41
Products Contents
518S 777S Regalite Polycut RB Cloth Belts 1/2"x 18"
2 ea. 60YF
2 ea. 80YF
241S Three-M-ite RB Cloth Belt 1/2"x 18"
2 ea. 120XE
Surface Conditioning Belts 1/2"x 18"
1 ea. A VFN
1 ea. A MED
1 ea. A CRS
524S 777S Regalite Polycut RB Cloth Belts 1/2"x 24"
2 ea. 60YF
2 ea. 80YF
2 ea. 120YF
Surface Conditioning Belts 1/2"x 24"
1 ea. A VFN
1 ea. A MED
1 ea. A CRS
Product Packs/Case UPC No.
518S 5 051144-82897
524S 5 051144-82898
Introductory Packs
Convenient introductory packs of Scotch-Brite surface condi-
tioning and 3M coated abrasive belts.
83
42
Scotch-Brite EXL wheels are unmatched in production and
maintenance operations. Use them on portable power tools,
bench motors, floor lathes and automatic or semi-automatic
equipment to clean, deburr, blend, finish or polish all types
of metals, composites or plastics.
An Extensive Range of Applications
EXL wheels can be used on many types of metal to create
a uniform, burr-free surface.
Deburring. . . . . . . . . . . . Stamped parts (ferrous, non-
. . . . . . . . . . . . . . . . . . . . . ferrous, special metals); aircraft
. . . . . . . . . . . . . . . . . . . . . components; surgical instruments;
. . . . . . . . . . . . . . . . . . . . . aluminum extrusions; machined
. . . . . . . . . . . . . . . . . . . . . metal components.
Edge Radiusing . . . . . . . Formed wire; cutlery; aluminum
. . . . . . . . . . . . . . . . . . . . . extrusions; machined parts; turbine
. . . . . . . . . . . . . . . . . . . . . blades.
Blending & Finishing . . Contours; grindlines; brazed
. . . . . . . . . . . . . . . . . . . . . surfaces; airfoils of turbine blades;
. . . . . . . . . . . . . . . . . . . . . compressor shafts; control
. . . . . . . . . . . . . . . . . . . . . panels; nameplates.
Polishing. . . . . . . . . . . . . Gun barrels, valve spools;
. . . . . . . . . . . . . . . . . . . . . machined shafts; golf club
. . . . . . . . . . . . . . . . . . . . . heads; other machined
. . . . . . . . . . . . . . . . . . . . . parts prior to plating or other
. . . . . . . . . . . . . . . . . . . . . subsequent operations.
Technical Information
Maximum Operating Speed: Wheels must be
operated at or below specified maximum operating speeds
(M.O.S.).
Steel wool
Hand files
Carbide burrs
Handknives and scrapers
Sand blasting
Wire brushes
Tampico and bristle
brushes
Buffs and compounds
Rubber bonded wheels
Set-up wheels
Replace these conventional products:
Scotch-BriteTM Wheels
84
85
Application Recommended SFPM
Decorative Finishing 500-3,000 SFPM
Composite/Wood Sanding 1,200-2,700 SFPM
Cleaning and Conditioning 2,000-5,000 SFPM
Prepolishing 2,000-7,000 SFPM
Oxide Removal 4,500-6,500 SFPM
Deburring 5,000-6,500 SFPM
Blending/Polishing 6,000-8,000 SFPM
Cutdown Prior to Buffing 7,000-8,500 SFPM
SFPM = Surface Feet Per Minute
43
Scotch-BriteTM EXL
Deburring Wheels
Available with either silicon carbide or aluminum oxide min-
erals, EXL wheels help manufacturers of high-tolerance parts
meet increasingly stringent product quality and production
efficiency requirements.
Aggressive and smooth running
EXL wheels run smoothly providing greater operator com-
fort, safety and controlespecially beneficial when working
with valuable parts.
Cool operation protects delicate parts
The open web construction of EXL wheels allows air to cir-
culate across the work surface. This helps prevent overheat-
Density/Mineral Type/Grade/UPC No.
Wheels/ Max. Operating
Size Case RPMs 8A MED 8S MED 8S FIN 9S FIN
6" x1/2"x 1"4 6,000 048011-13616 048011-18277 048011-09548 048011-05790
6" x1"x 1"3 6,000 048011-13617 048011-18278 048011-09549 048011-05132
6" x1
1/2"x 1"2 6,000 048011-18186
6" x 2"x 1"2 6,000 048011-13618 048011-05133
8" x3/8"x 3"4 4,500 048011-14791
8" x1/2"x 3"4 4,500 048011-17459 048011-14629 048011-05791
8" x1"x3"3 4,500 048011-13619 048011-18279 048011-09551 048011-05135
8" x2"x3"2 4,500 048011-13620 048011-09552 048011-05136
Accessories: Use with 3M Flange Adaptors No.3 or 5 or 3M
Flanges No. 355 or 356. See pg. 47.
ing that causes discoloration and warping of thin
and delicate materials.
Long life saves money
Extensive customer tests show that EXL wheels last much
longer than other non-woven products while maintaining
consistent performance and uniform wheel wear. More pro-
duction parts per wheel means money saved.
Clean and safe
Nuisance dust from expended abrasive is greatly reduced
compared to other types of non-woven wheels. And, there
are no flying wires to endanger operators as with wire
wheels.
New EX2 and EX3 Deburring and Finishing Wheels can
provide additional value in many applications. Ask your 3M
sales representative or distributor for additional information.
86
44
Scotch-BriteTM EXLUnitized
Deburring Wheels
Applications:
Scotch-Brite EXL unitized wheels are excellent for debur-
ring and polishing titanium, special alloys, composites and
plastics. They are specially designed
to minimize heat buildup on the work surface.
Fine finishes on precision tooled pieces.
Aerospace, automotive, electronics and medical instru-
ment manufacturers.
Cool RunningOperators can apply more pressure
to these wheels because they are less sensitive to heat
buildup at the work surface.
Safe & CleanSynthetic fiber and resin construction
eliminate danger of loose flying wires commonly associ-
ated with wire wheels. And, they are cleaner to
use than buffs and compounds.
Choose from a wide range of densities and grades for
use on a variety of jobs from deburring precision threads
to polishing welds.
Wheel Color Lettering
2 S FIN Gray Purple
*2 S VFN Gray Maroon
2 A MED Gray Black
*3 S FIN Gray Pink
4 A FIN Tan Blue
4 S FIN Gray Green
6 A FIN Tan Blue
6 S FIN Gray Green
6 A MED Tan Red
8 A MED Tan Orange
8 A CRS Tan Orange
*8 A XCRS Brown Green
Accessories: Use with 3M mandrels. See pg. 48.
*Kut items
UPC No. * (Max. Operating RPMs)
Size Wheels/
Dia.xWxAH Case 2A MED 2S FIN 4A FIN 6A MED 6S FIN 8A MED 8A CRS
1/2" x 1/8"x 1/8"120 15519 15518
(40,100) (35,100)
1" x 1/8"x 1/8"100 15517 15864 15516
(35,100) (35,100) (35,100)
1" x 1/4"x 1/8"100 13734
(30,100)
1" x 1"x 3/16"50 15859
(35,100)
1" x 1"x 3/16"50 15527 13713 14063 13753 13752
(25,100) (30,100) (35,100) (35,100) (35,100)
11/2" x 1/8"x 3/16"80 15515
(30,100)
11/2" x 1/4"x 1/8"80 13714
(20,100)
11/2" x 1/4"x 3/16"80 14746
(20,100)
2" x 1/8"x 3/16"60 15512 15511
(22,100) (22,100)
2" x 1/4"x 1/8"60 13736
(16,100)
2" x 1/4"x 3/16"60 15513
(16,100)
2" x 1/4"x 1/4"60 15529 13932 13755
(16.100) (16,100) (22,100)
2" x 1/2"x 1/4"30 13715
(16,100)
3" x 1/8"x 1/4"40 15462
(18,100)
3" x 1/4"x 1/4"40 15531 13716 14067 13764 13763
(12,100) (12,100) (18,100) (18,100) (18,100)
3" x 1/4"x 3/8"40 16054 14750 14751 15118 14752 14753 13766
(12,100) (12,100) 18,100 (18,100) (18,000) (18,100) (18,100)
3" x 1/2"x 1/4"20 15532 13717 13767
(10,000) (10,000) (15,100)*
3" x 1/2"x 3/8"20
3" x 3/4"x 1/4"10 13718
(10,000)
3" x 1"x 1/8"24358
(9000)
87
45
Clean and Strip Cup
Wheels
Cup Wheels will fit a wide range of right angle grinders
(3"and 4"diameter sizes have the convenient spin-on fea-
ture) with a broad selection of thread sizes.
Applications: Aggressive,
long lasting, cleaning and
coating removal and other
tough MRO uses.
Mineral Type/Grade UPC
No.
Size Max. Oper.
Dia.xThd. Wheels/Case RPMs S XCS
3" x 3/8" - 24 5 18,100 048011-04151
4" x 38"- 24 4 12,100 048011-04217
4" x 1/2"- 13 4 12,100 048011-04152
4" x 5/8"- 11 4 12,100 048011-04153
4" x M10 - 1.25 4 12,100 048011-05519
4" x M10 - 1.5 4 12,100 048011-04218
4" x M14 4 12,100 048011-04154
6" x 7/8"* * 2 7,000 048011-04237
Accessories: Use 6" diameter cup wheel with the 3M Cup Wheel Back-up Pad No. 955.
The lower of the wheel or holder MOS rating must always be used.
89
88
Scotch-BriteTM EXLUnitized Wheels (Continued)
UPC No. * (Max. Operating RPMs)
Size Wheels/
Dia.xWxAH Case 2A MED 2S FIN 4A FIN 6A MED 6S FIN 8A MED 8A CRS
4" x 1/4"x 1/4"20 13739
(8,500)
6" x 1/4"x 1/2"8 17498 13741 13777
(4,500) (5,000) (7,500)
6" x 1/2"x 1/2"4 15534 13719
(4,500) (5,000)
6" x 1/2"x 5/8"4 15831
(5,000)
6" x 1/2"x 1"4 16545 14379
(4,500) (5,000)
6" x 1"x 1/2"2 13742
(5,000)
6" x 1"x 1"2 16544 13743 13788
(4,500) (5,000) (7500)
8" x 1/4"x 1/2"8 15827
(4,000)
8" x 1/2"x 1/2"4 15844
(4,000)
8" x 1/2"x 3/4"4 15824
(4,000)
8" x 1/2"x 1"4 16546 15823
(3,500) (4,000)
* Add Prefix 048011- to UPC No. when ordering. Stock sizes by Grade. Other grades and sizes available.
46
Multi-Finishing Wheels
The wheel for producing uniform grain finishes on
stainless steel and other metals
Multi-Finishing wheels are highly conformable, soft wheels
that create uniform and attractive final finishes on ferrous and
non-ferrous metals. They are tough enough to finish edges
and welds and soft enough to final finish large, flat surfaces.
Density/Mineral Type/Grade UPC No.
Size Wheels/
Dia.xWxAH Case 2S CRS 2S MED 2S FIN
6"x 1"x 1"3 048011-13170-2 048011-13171-9 048011-13172-6
6"x 2"x 1"2 048011-13176-4 048011-13177-1 048011-13178-8
6"x 3"x 1"1 048011-13179-5 048011-13180-1 048011-13181-8
6"x 4"x 1"1 048011-13358-4
8"x 1"x 3"3 048011-13182-5 048011-13183-2 048011-13184-9
8"x 2"x 3"2 048011-13185-6 048011-13186-3 048011-13187-0
90
Cut & Polish Wheels
Heavy duty wheels for aggressive blending and fin-
ishing
Long-lasting and aggressive, Cut & Polish wheels perform
well on all kinds of tough blending and finishing jobs. They
produce uniform results quickly and easily and are often used
to replace conventional abrasives such as rubber bonded
wheels, set-up wheels, abrasive flap wheels and belts.
Density/Mineral Type/Grade UPC No.
Size Wheels/
Dia.xWxAH Case 7A CRS 7A MED 7A FIN 7A VFIN 5A FIN
6"x 1/2"x 1"4048011-05182-6
6"x 1"x 1"3 048011-03263-4 048011-03262-7 048011-03270-2 048011-03269-6 048011-02960-3
6"x 2"x 1"2 048011-03272-6 048011-02972-6
8"x 1/2"x 3"4 048011-05183-3
8"x 1"x 3"3 048011-03276-4 048011-03275-7 048011-02965-8
8"x 2"x 3"2 048011-03282-5 048011-03281-8 048011-02967-2
* Additional sizes available as stock or made-to-order.
91
Stock Sizes*
Stock Sizes*
47
3MTM Flange No. 356
Used to reduce wheel cores
and internal diameters to fit
smaller shaft sizes. This
product spans a range of
sizes. It is manufactured of
spun aluminum, has a taper
locking feature to automati-
cally center the flange inside
the core of the wheel.
Product Size Sets/Case UPC No.
Dia.xAH
356 3" x 1/2"1 048011-03896
356 3" x 5/8"1 048011-03897
356 3" x 3/4"1 048011-03898
356 3" x 7/8"1 048011-18407
356 3" x 1"1 048011-03899
356 3" x11/4"1 048011-03900
356 3"x 11/2"1 048011-04307
3MTM Flange No. 365
This flange was specifically designed for use with wheels that
are 12" wide and have a 3" diameter center hole. (For wheels
wider than 12", use 3M Flange no. 356). The flange no. 365 is
used to reduce the wheel core internal diameter to fit smaller
shaft sizes. This product spans a range of sizes. It is made of
spun aluminum and has a taper locking feature to automati-
cally center the flange inside the core of the wheel.
Product Size Sets/Case UPC No.
Dia.xAH
365 3" x 1/2"1 048011-18410
365 3" x 5/8"1 048011-18411
365 3" x 3/4"1 048011-18412
365 3" x 7/8"1 048011-18413
365 3" x 1"1 048011-18414
365 3" x 11/4"1 048011-18415
Accessories Scotch-BriteWheels
3MTM Flange Adaptor No. 3
Used to reduce 1"internal diameter core size, flange size or
wheel size to fit shafts smaller than 1"diameter. This item is a
stamped and formed sheet metal product.
Product Size Sets/Case UPC No.
31" x 3/8"1 048011-09151
31" x 1/2"1 048011-09152
31" x 5/8"1 048011-09153
31" x 3/4"1 048011-09154
31" x 7/8"1 048011-09155
3MTM Flange Adaptor No. 5
Telescoping wheel adaptors
1"and 1/2" wide to reduce
1" wheel center holes to fit
1/2", 5/8", 3/4", or 7/8"shafts.
Use with a set of flat or
cupped washers 1/3the
diameter of the wheel for
side support.
Product Size Sets/Case UPC No.
51"x 1/2"x 1/2"1 048011-16859
51"x 1"x 1/2"1 048011-16860
3MTM Recessed Flange No. 355
Used to reduce 3"internal
diameter core size to fit shafts
smaller than 3"diameter when
a protruding locking nut is not
desirable.
A recessed flange is mounted
on the outboard side of the
brush or wheel and the locking
nut may be installed within the
area of the recess. A stamped and formed sheet metal product.
Product Size Sets/Case UPC No.
Dia.xAH
355 Recessed 3" x 1/2"1 048011-03885
355 Recessed 3" x 5/8"1 048011-03884
3MTM Spindle Extender Kit No. 300
For use on flexible shafts
with 6"and 8"diameter
Scotch-Brite wheels through
4"in width.
Consists of
(1) driving spindle
5/8"- 11 female
thread
(1) washer with 5/8"arbor hole
(2) 1"x 5/8"bushings
(1) flange adaptor 5/8"
(1) spanner nut 1/2"- 13 female threaded shank
available by special request (051144-05622).
Product Kits/Case UPC No.
300 1 048011-04019
92
93
94
95
3MTM Mandrels
Mandrels are corrosion protected and machined to industrial
standards of thread size and shaft diameters. They are
designed for use with Scotch-Brite Unitized Wheels.
Mandrels are furnished complete with washers to fit available
wheel sizes.
Mandrel No. 931, 932, 933 Mandrel No. 934
Mandrel No. 936 and 946 Mandrel No. 990
Mandrel No. 992 and 994 Mandrel No. 991
Mandrel No. 996 and 998
48
Max.
Shank Wash. Oper.
Product Use With Length Size Diam. RPM
931 Unitized Wheels 11/2"1/8"1/2"13,000
1", 11/2" dia. x 1/4" wd
x 1/8" CH
932 Unitized Wheels 2"1/4"13/16"20,000
11/2", 2"dia. x 1/4",
1/2" wd x 1/4" CH
Note: 5/16" CH is
recommended for
wheels 6 density
or harder
933 Unitized Wheels 2"1/4"1"14,000
2", 21/2", 3" dia. x 1/4",
1/2", 3/4", 1"wd x
1/4"CH
Note: 5/16"CH is
recommended for
wheels 6 density
or harder
934 Unitized Wheels 31/16"1/4"21/2"12,000
3"-6"dia. x 1/4", 1/2"w/3" dia.
3/4", 1" wd x 1/2"CH 8,500
w/4" dia.
6,000
w/6" dia.
Max.
Shank Wash. Oper.
Product Use With Length Size Diam. RPM
936 Unitized Wheels 21/16"1/4"N/A 22,200
(Plastic) 1"x 1"x 3/16"
946 Unitized Wheels 13/4"1/4"1/2" Hex 35,200
(Steel) 1"x 1"x 3/16"Nut Dia.
990 Unitized Wheels 13/4"1/4"None 25,200
2"-3"dia. x 1/8"- 1/2"wd*
w/2"dia. x 3/8"CH 22,200
w/21/2"dia.
18,200
w/3"dia.
991 Unitized Wheels 17/8"1/4"None 25,200
2"-3"dia. x 1/2"-1"wd** w/2"dia.
x 3/8"CH 22,200
w/21/2"dia.
18,200
w/3"dia.
992 Unitized Wheels 11/2"1/8"None 35,200
1"-11/2"dia. x 1/8"-1/2"wd* w/1"dia.
x 3/16"CH 30,200
w/11/2"
dia.
994 Unitized Wheels 11/2"1/4"None 35,200
1"-11/2"dia. x 1/8"- 1/2"wd* w/1"dia.
x 3/16"CH 30,200
w/11/2"dia.
996 Unitized Wheels 111/16"1/8"None 40,200
1/2"-3/4"dia. x 1/8"-1/4"wd w/1/2"and
x 1/8"CH 3/4"dia.
998 Unitized Wheels 111/16"1/4"None 40,200
1/2"-3/4"dia. x 1/8"-1/4"wd w/1/2"and
x 1/8"CH 3/4"dia.
* These mandrels come with two caps, one silver for 1/8"and 1/4"
wide wheels and one black for 3/8"and 1/2"wide wheels.
Product Mandrels/Case UPC No.
931 5 048011-13966
932 5 048011-13967
933 5 048011-13968
934 1 048011-04021
936 5 048011-04018
944 1 048011-13928
946 5 048011-05726
990 5 048011-15012
990 Bulk 60 048011-15015
991 5 048011-16847
992 5 048011-15013
994 5 048011-16848
996 5 048011-15014
998 5 048011-16849
102 101
103
98 99
96 97
49
RolocTM + Holders & Button Combination
Packs
These combination packs contain one Roloc + Holder No.1
and one Roloc + Button No. 6 or 7.
Product Specifications
Product Use With
No. 1 and No. 6 Unitized Wheels 3"Diameter
and smaller x 1/8"wide x 3/8" CH
No. 1 and No. 7 Unitized Wheels 3" Diameter
and smaller x 1/4"wide x 3/8" CH
Product Sets/Case UPC No.
No. 1 and No. 6 5 048011-14916
No. 1 and No. 7 5 048011-14915
Introductory Packs
A convenient introductory pack of assorted EXL unitized
wheels and/or EXL Deburring Wheels lets you decide which
product is right for you.
Product Contents
990S EXL Unitized Wheels
2 ea. 2S FIN 1"x 1" x 3/16"
2 ea. 2A MED 1"x 1"x 3/16"
2 ea. 6A MED 1" x 1"x 3/16"
2 ea. 8A CRS 1"x 1"x 3/16"
1 ea. 2S FIN 3"x 1/4"x 3/8"
1 ea. 2A MED 3"x 1/4"x 3/8"
1 ea. 6A MED 3" x 1/4"x 3/8"
1 ea. 8A CRS 3"x 1/4"x 3/8"
Mandrels
1 ea. 936
1 ea. 990 with Silver cap
992S EXL Unitized Wheels
4 ea. 6A MED 1/2"x 1/8"x 1/8"
4 ea. 8A CRS 1/2"x 1/8"x 1/8"
2 ea. 2S FIN 1"x 1/4"x 1/8"
2 ea. 6A MED 1"x 1/8"x 1/8"
2 ea. 8A CRS 1"x 1/8"x 1/8"
2 ea. 2S FIN 11/2"x 1/4"x 3/16"
2 ea. 6A MED 11/2"x 1/8"x 3/16"
2 ea. 8A CRS 11/2"x 1/8"x 3/16"
2 ea. 2S FIN 2"x 1/4"x 3/16"
2 ea. 6A MED 2"x 1/8"x 3/16"
2 ea. 8A CRS 2"x 1/8"x 3/16"
Mandrels
1 ea. 992 with short cap
1 ea. 994 with short cap
1 ea. 996
1 ea. 998
EXL EXL Deburring Wheel
1 ea. 8A MED 6"x 1"x 1"
EXL Unitized Wheel
1 ea. 2A MED 6"x 1/2"x 1"
Flange Adaptor No. 5
1 ea. 1"x 1/2"x 1/2"
1 ea. 1"x 1" x 1/2"
Product Packs/Case UPC No.
990S 5 048011-18245
992S 5 048011-15509
EXL 5 048011-16405
50
PGTM Wheels
3MTM PG wheels deliver a consistent finish and a uniform
rate of cut. They are non-loading, non-glazing and non-
dulling. As they are used the flaps wear away to continual-
ly expose new abrasive. PG wheels can be shaped to fit
any desired contour, even a compound radius. There is a
full line of accessories that complements the PG wheel line
to give you the best possible finish in the least time.
3MTM 747D RegaliteTM PolycutTM Resin Bond
Cloth X Wt.
Premium aluminum oxide mineral and Cubitron ceramic alu-
minum oxide coated on a cloth backing. Incorporates
a grinding aid (excellent for stainless).
T83 - 1/4"straight
Grade and UPC No.*
SizeSiz Min. Max. Oper.
Dia. x W x Shk. Prod. I.D. Pkg./Case RPMs 40 60 80 100 120 150 180 240 320
T83
1"x 1"x 1/4"747D 10 25,000 80761 80757 80753
11/2"x 1"x 1/4"747D 10 22,000 80762 80758 80754
2"x 1"x 1/4"747D 10 20,000 80763 80759 80755
21/2"x 1"x 1/4"747D 10 18,000 80764 80760 80756
3"x 1"x 1/4"747D 10 18,000 80650 80651 80652
* Add Prefix 051144- to UPC No. when ordering.
Grade and UPC No.*
Size Min. Max. Oper.
Dia. x W x Thd. Prod. I.D. Pkg./Case RPMs 40 60 80 100 120 150 180 240 320
T84
2"x 1/2"x 1/4"747D 10 20,000 49628** 49631** 83266
2"x 1"x 1/4"747D 10 20,000 83271 83268 83265
21/2"x 1"x 1/4"747D 10 18,000 83270 49632** 83264
3"x 1"x 1/4"747D 10 18,000 83269 83267 83263
* Add Prefix 051144- to UPC No. when ordering.
** Add Prefix 051111- to UPC No. when ordering.
T84 - 1/4"x 20 threaded
106
104
105
51
Grade and UPC No.*
Size Min. Max. Oper.
Dia. x W x Shk. Prod. I.D. Pkg./Case RPMs 40 60 80 100 120 150 180 240 320
1"x 1/2"x 1/4"244E 10 25,000 96800 96801 96802 96803 96804
241E 10 96805
1"x 1"x 1/4"244E 10 25,000 35475 35476 35477 96806
241E 10 96807
11/2"x 1/2"x 1/4"244E 10 22,000 96808 96809 96810 96811 96812
241E 10 96813
11/2"x 1"x 1/4"244E 10 22,000 35472 35473 49636** 96815
241E 10 96816
2"x 1/2"x 1/4"244E 10 20,000 14611 96818 49633** 96820 96821
241E 10 96822
2"x 1"x 1/4"244E 10 20,000 14623 14624 14625 96823
241E 10 96824
2"x 11/2"x 1/4"244E 10 20,000 96825 96826 96827 96828
21/2"x 1"x 1/4"244E 10 18,000 49626**14640 14641
21/2"x 11/2"x 1/4"244E 10 18,000 96829 96830 96831
3"x 1/2"x 1/4"244E 10 18,000 14643 14644 14645 96832 96833
241E 10 96834
3"x 1"x 1/4"241D 10 18,000 96835
244E 10 14655 14656 14657 96836
241E 10 96837
3"x 2"x 1/4"244E 10 18,000 49635** 49630** 49634**
* Add Prefix 051144- to UPC No. when ordering.
** Add Prefix 051111- to UPC No. when ordering.
Kut stock items
3MTM 244E Three-M-iteTM RB Cloth XE Wt.
3MTM 241E Three-M-iteTM RB Cloth XE Wt.
3MTM 241D Three-M-ite TM RB Cloth X Wt.
Our standard aluminum oxide PG wheels with durable rayon
or cotton drills backing.
T83 - 1/4"straight
107
52
Grade and UPC No.*
Size Prod. Min. Max. Oper.
Dia. x W x Thd. I.D. Pkg./Case RPMs 40 60 80 100 120 150 180 240 320
1"x 5/8"x 1/4"- 20 241D 10 25,000 96841
244E 10 96842 96843 96844 96845 96846 96847
241E 10 96848
1"x 1"x 1/4"- 20 241D 10 25,000 96849
244E 10 35467 35468 96850 35469 96851 96852
241E 10 96853
11/2"x 1"x 1/4"- 20 244E 10 22,000 49627** 35465 49700**
2"x 1/2"x 1/4"- 20 241D 10 20,000 96860
244E 10 96861 96862 96863 96864
241E 10 96865
2"x 1"x 1/4"- 20 241D 10 20,000 96866
244E 10 14575 14576 14577 96867
241E 10 96868
2"x 11/2"x 1/4"- 20 244E 10 20,000 96869 96870 96871 96872
21/2"x 1/2"x 1/4"- 20 244E 10 18,000 96873 96874 96875 96876 96877
241E 10 96878
21/2"x 1"x 1/4"- 20 244E 10 18,000 14591 14592 14593 96879 96880
241E 10 96881
3"x 1/2"x 1/4"- 20 244E 10 18,000 96882 96883 96884 96885 96886
241E 10 96887
3"x 1"x 1/4"- 20 241D 10 18,000 96888
244E 10 14607 14608 96889 14609 96890
241E 10 96891
* Add Prefix 051144- to UPC No. when ordering.
* Add Prefix 051111- to UPC No. when ordering.
Kut stock items
T84 - 1/4"x 20 threaded
108
3MTM 244E Three-M-iteTM RB Cloth XE Wt.
3MTM 241E Three-M-iteTM RB Cloth XE Wt.
3MTM 241D Three-M-ite TM RB Cloth X Wt.
Our standard aluminum oxide PG wheels with durable rayon
or cotton drills backing.
53
Grade and UPC No.*
Size Prod. Min. Max. Oper.
Dia. x W x AH I.D. Pkg./Case RPMs 40 50 60 80 100 120 150 180 220 240 320
6"x 1"x 1"741A 1/5 6,100 82770 81986 81984
6"x 11/2"x 1"741A 1/5 5,600 81987 81985 81982
6"x 2"x 1"741A 1/5 5,200 81988 81989 81983
* Add Prefix 051144- to UPC No. when ordering.
Grade and UPC No.*
Size Prod. Min. Max. Oper.
Dia. x W x AH I.D. Pkg./Case RPMs 40 50 60 80 100 120 150 180 220 240 320
T80
31/2"x 1"x 5/8"244E 1/10 10,000 96895 96896 96897 96898 96899
31/2"x 11/2"x 5/8"241D 1/10 9,500 96900
244E 1/10 84098 96901 84100
31/2"x 2"x 5/8"241D 1/10 9,000 96902
244E 1/10 96903 96904 96905 96906
4"x 1"x 5/8"241D 1/10 9,000 96907
244E 1/10 84097 96908 84099 96909
4"x 11/2"x 5/8"241D 1/10 8,500 96910
244E 1/10 96911 96912 96913 96914
4"x 2"x 5/8"244E 1/10 7,500 96915 84103 84102 96916 96917
4"x 4"x 3/4"244E 1/10 7,500
5"x 11/2"x 5/8"241D 1/10 6,800 96918
244E 1/10 96919 96920 96921 96922
Medium
6"x 1/2"x 1"244E 1/5 6,400 96923 96924 96925 96926 96927 96928
6"x 1"x 1"241D 1/5 6,100 96929
244E 1/5 35114 35113 35112 35111 35109 35108 35105 96930
241E 1/5 35103
6"x 11/2"x 1"241D 1/5 5,600 96931
244E 1/5 35102 35100 35098 35095 96932
241E 1/5 55816** 96933
6"x 2"x 1"241D 1/5 5,200 96934
244E 1/5 35089 35088 35086 35330 35084 35083 35081
6"x 21/2"x 1"244E 1/5 5,200
6"x 3"x 1"244E 1/5 4,500 96935 35070 96936 96937
8"x 1"x 1"244E 1/3 4,600 35063
8"x 2"x 1"244E 1/3 3,900 35049 35048
10"x 2"x 13/4"244E 1/2 3,900 35014
14"x 2"x 11/4"241D 1/1 3,000 35032
* Add Prefix 051144- to UPC No. when ordering.
** Add Prefix 051119- to UPC No. when ordering.
Kut stock items
3MTM 741ARegaliteTM RB Cloth X Wt.
Combines the characteristics of aluminum oxide with 3M’s
CubitronMineral on a strong X wt. backing. The 3M 741A
product is applicable for use on both ferrous and non-ferrous
metals.
3MTM 244E Three-M-iteTM RB Cloth XE Wt.
3MTM 241D Three-M-ite TM RB Cloth X Wt.
3MTM 241E Three-M-iteTM RB Cloth XE Wt.
Our standard aluminum oxide PG wheels with durable rayon
or cotton drills backings.
109
54
Accessories – PG Wheels
3MTM PGTM Wheel Adaptor No. 1
For 2"thru 3"Diameter Wheels. Adaptor includes one female
threaded shaft, 5 screws in varying lengths to accommodate
wheels from 1/2"to 2"wide and one hex wrench.
3MTM Flange Adaptor Kit No. 3
Adaptor includes spindle extension for use on short spindles,
four spacer bushings, 1/2"width spacer bushing, an arbor hole
adaptor (plug type) and a cap nut to bush the flanges and pro-
vide the recessed hub. For all wheel widths up to and includ-
ing 3", in 5"thru 8"diameters.
Size UPC No.
5/8"-11 Thread 051144-45038
3MTM Wheel Adaptor No. 81A
For use with Type 84 PG Wheels.
This adaptor has a 1/4"diameter
shank and a 1/4-20 thread female
acceptor end.
UPC No.
051144-45081
Fits Arbor Size UPC No.
7/8"051144-45032
3/4"051144-45033
5/8"051144-45034
1/2"051144-45035
3MTM Wheel Adaptor Kit No. 3
Two arbor hole (plug type) adaptors for 5"thru 8"diameter
PG Wheels. 1"O.D. x various ID’s.
Size UPC No.
5/8"-11 Thread 051144-45040
1/4"Shank 051144-45041
3MTM PGTM Wheel Adaptor No. 2
For 31/2"or 4"Diameter Wheels. Adaptor includes spindle
extension 2 screws and one sleeve to accommodate wheels
1", 11/2"and 2"wide. Available spindle diameters and thread
counts are 5/8-11, 1/2-13, or 1/4"shank.
UPC No.
051144-45043
55
3MTM Green Corps Reinforced Weld
Grinding Wheel
Read all warnings supplied with wheels. Do not use on tools
without guards.
Size Pkg. Max. UPC No.
Min./Unit RPMs
3"x 3/16"x 3/8"5 pack/ 20,375 051131-01991
5 packs case
Size Pkg. Max. UPC No.
Min./Unit RPMs
2"x 1/16"x 1/4"bulk 42,000 051144-83487
50 wheels/box
3"x 1/32"x 1/4"bulk 35,000 051144-82238
50 wheels/box
3"x 1/32"x 3/8"bulk 35,000 051131-01985
50 wheels/box
3"x 1/16"x 3/8"bulk 28,000 051131-01986
50 wheels/box
4"x 1/32"x 3/8"bulk 26,250 051131-01994
50 wheels/box
4"x 1/16"x 3/8"bulk 21,000 051144-83488
50 wheels/box
Green CorpsTM Cut-Off
Wheels
Green CorpsTM Cut-Off Wheels are designed to provide high
cut rates and long life on most all materials including fiber-
glass, stainless steel, mild steel and aerospace alloys. Green
Corps Wheels incorporate 3M’s patented Cubitron ceramic
abrasive grain technology and are ideal for use on a wide
variety of utility type cut-off tools. Read all warnings sup-
plied with wheels. Do not use on tools without guards.
Size Wheels Max. UPC No.
per case RPMs
3"x 1/32"x 3/8"50 wheels 25,000 051131-01987
per case
3"x 1/16"x 3/8"50 wheels 25,000 051131-01988
per case
General Purpose Cut-Off
Wheels
110
56
When portable power tools are used in bench area operations,
3M helps keep things moving with a full line of money-sav-
ing, quality boosting coated abrasives and surface condition-
ing products. Each is designed to deliver outstanding results
and to speed up time-consuming jobs such as grinding, debur-
ring, blending, cleaning, and finishing of flat and irregular sur-
faces and hard-to-reach areas.
Scotch-Brite spindle mounted ganged discs provide a high
degree of conformability.
Scotch-Brite stars mount singly or in combination for effi-
cient I.D. cleaning and polishing operations.
Scotch-Brite high performance flap brushes (CFFB) provide
consistent finishes. Shown here with the 3M Roloc + holding
system.
Acomplete grinding and surface
conditioning system
Used individually or as part of a complete grinding and sur-
face conditioning sequence, each 3M product maximizes
results in your bench area operations. Often, the combination
of 3M coated abrasives and Scotch-Brite surface conditioning
products can eliminate the need for intermediate grinding or
blending steps.
Bench Area Products
112
113
119
57
Mineral Type/Grade UPC No.
Brushes/ Max. Oper.
Size Prod. I.D. Case RPMs S XCS
4"x 1/2"CSD1-R 10 8,000 048011-14592
4"x 1"CSD2-R 10 8,000 048011-14784
4"x 1/2"x 1/4"CSD1-S 10 8,000 048011-14579
4"x 1"x 1/4"CSD2-S 10 8,000 048011-14780
Accessories: Roloc+ Holder No. 2 for CSD1-R and CSD2-R. See pg. 60.
CSD1-R, CSD1-S, CSD2-R, CSD2-S
Either one Clean and Strip Disc (CSD1) or two Clean and
Strip Discs (CSD2) mounted to a shaft. These products are
excellent for heavy duty cleaning of rusts, oxides, paints, and
coatings. Cleans much faster and safer than wire brushes.
Color: Black
Mineral Type/Grade UPC No.
Discs/ Max. Oper.
Size Prod. I.D. Case RPMs S XCS
3"x 1/2"HPCSD1-R 10 10,000 048011-14591
4"x 1/2"HPCSD1-R 10 8,000 048011-14777
3"x 1/2"x 1/4"HPCSD1-S 10 10,000 048011-14782
4"x 1/2"x 1/4"HPCSD1-S 10 8,000 048011-14785
Accessories: Roloc+ Holder No. 2 for HPCSD1-R. See pg. 60.
Mineral Type/Grade UPC No.
Discs/ Max. Oper.
Size Prod. I.D. Unit RPMs A MED
3"x 11/4"CPD5-R 10 10,000 048011-14594
4"x 11/4"CPD5-R 10 8,000 048011-14590
3"x 11/4"x 1/4"CPD5-S 10 10,000 048011-14593
4"x 11/4"x 1/4"CPD5-S 10 8,000 048011-14779
Accessories: Roloc+ Holder No. 2 for CPD5-R. See pg. 60.
HPCSD1-R, HPCSD1-S
Clean and Strip web in convenient disc form. Used extensive-
ly in maintenance type applications for removing oxides,
scale and rust as well as weld conditioning and cleaning. The
modern efficient alternative to wire brushes and scrapers. A
tough cleaning product. Provides much longer life than CSD1
products with slightly less conformability.
Color: Gray
CPD5-R, CPD5-S
Five discs of tough Cutting and Polishing Scotch-Brite Web
ganged together on a shaft. Use for satin or antique
finishing as well as light to medium duty cleaning
applications.
Color: Tan
114 115
116
117
58
118
119
120
Stars
Scotch-Brite Stars are the perfect choice for cleaning and pol-
ishing I.D. of pipe and tubing. Their unique shape allows the
star tips to provide constant outward pressure on the walls of
parts made of steel, aluminum or plastic so you can quickly
get a smooth, consistent cleaning action.
Scotch-Brite Stars are available in a variety of sizes and
grades and are designed to work with the 3MTM Brand Mandrel
No. 944. They can be used with power bench tools such as
die grinders, straight-shaft grinders, or electric drills.
Color: A VFN - Blue
A CRS - Brown
Mineral Type/Grade UPC No.
Stars/ Max. Oper.
Size Unit RPMs AVFN ACRS
11/2"100 24,000 048011-13800 048011-13370
2"100 24,000 048011-13803 048011-13371
3"50 18,000 048011-13802 048011-13372
4"50 18,000 048011-13804 048011-13373
41/2"50 18,000 048011-13801 048011-13374
Accessories: Mandrel No. 944. See pg. 60.
Mineral Type/Grade UPC No.
Discs/ Max. Oper.
Size Prod. I.D. Unit RPMs A MED
2"x 1"x 1/4"CPFB-S 25 12,000 048011-16622
3"x 13/8"CPFB-R 10 8,000 048011-14588
3"x 13/4"x 1/4"CPFB-S 10 8,500 048011-05974
Accessories: Roloc+ Holder No. 2 for CPFB-R. See pg. 60.
CPFB-R, CPFB-S
Flaps of heavy duty Cutting and Polishing web. Will leave a
uniform surface finish while removing handling marks and
surface imperfections. A long-life flap brush.
Color: Tan
Mineral Type/Grade UPC No.
Brushes/ Max. Oper.
Size Prod. I.D. Case RPMs A CRS S FIN
3"x 13/8"CFFB-R 10 7,500 048011-14587 048011-14783
3"x 13/4"x 1/4"CFFB-S 10 8,500 048011-05975 048011-14781
Accessories: Roloc+ Holder No. 2 for CFFB-R. See pg. 60.
CFFB-R, CFFB-S
Scotch-Brite high performance finishing web made into a flap
brush. The high performance web outlasts conventional webs
while giving a longer scratch pattern ideal for decorative
finishing and light deburring applications.
Color: Green
59
Grade and UPC No.
Max. Oper.
Size Prod. I.D. RPMs Wheels/Case 80X P120X P180X
21/2"x 11/4"Combi-R 9,000 10 051144-80802 051144-80679 051144-80800
Grade and UPC No.
Max. Oper.
Size Prod. I.D. RPMs Wheels/Case 80X P120X P180X
3"x 13/4"x 1/4"Combi-S 8,000 10 051144-80801 051144-80678 051144-80799
3MTM COMBI-S
(Spindle Mount)
3MTM COMBI Wheels
These unique wheels are a combination of aluminum oxide
coated abrasive and Scotch-BriteTM Brand material. They are
designed for a variety of surface finishing and blending oper-
ations on a large variety of workpieces.
3MTM COMBI-R
(Roloc+TM Shaft)
RolocTM+ Holder No. 1
Pkg.
Product I.D. Min./Unit UPC No.
Roloc+ Holder No. 1 5/cs 048011-15408
Roloc+ Holder No. 1 40/cs 048011-14586
121
122
Maximum
Use With Size Oper . RPMs
Scotch-Brite Stars 1/4"shank with 25,000
1/4"-20 exter nal thread
Product Mandrels/Case UPC No.
944 1 048011-13928
60
Accessories Bench Area
RolocTM + Holder
These holders are made of
a durable plastic for less
critical grinding and surface
conditioning applications.
They are compatible with
Roloc+ products.
Max.
Oper. Holders/
Product Dia. Use With RPMs Case UPC No.
11"COMBI-R's 25,000 5 048011-15408
21
1/2"ROLOC+ 25,000 5 048011-15409
Products
21
1/2"ROLOC+ 25,000 40 048011-14585
Products
32"2"diameter 25,000 5 048011-15410
Roloc Discs
32"2"diameter 25,000 40 048011-14584
Roloc Discs
43"3"diameter 25,000 5 048011-15411
Roloc Discs
43"3"diameter 25,000 20 048011-14583
Roloc Discs
Introductory Pack
This convenient introductory deal is an easy and convenient
way to try various sizes and grades.
3MTM Mandrel No. 944
123
124
Product Contents
944S Stars
2 ea. A VFN 11/2"
2 ea. A VFN 2"
2 ea. A VFN 3"
2 ea. A VFN 4"
2 ea. A CRS 11/2"
2 ea. A CRS 2"
2 ea. A CRS 3"
2 ea. A CRS 4"
Mandrel
1 ea. 944
Product Packs/Case UPC No.
944S 5 048011-18255
125
61
Cartridge Rolls
3M manufactures cartridge rolls in a wide variety of shapes
and sizes to let you get into all the hard-to-get-at areas on
your workpieces. They are available in both straight and full
taper shapes. See the accompanying tables for descriptions of
the various constructions. We also offer a complete line of
accessories for use with these cartridge rolls.
3MTM 747D RegaliteTM PolycutTM Resin Bond
Cloth X Wt.
These premium constructed cartridge rolls utilize 3M’s
Cubitron & aluminum oxide minerals coated on an X-wt. cot-
ton backing. An outstanding value for use on a variety of
exotic and other metals.
Grade and UPC No.
Pkg.
Size Prod. I.D. Min./Unit 60X 80X 120X
Regular
1/4"dia. x 1"L x 1/8" CH 747D 50/200 051144-80793
3/8"dia. x 1"L x 1/8" CH 747D 50/200 051144-80789 051144-80794 051144-80791
1/2"dia. x 11/2"L x 1/8" CH 747D 50/200 051144-80790 051144-80796 051144-80792
5/8"dia. x 1"L x 3/16" CH 747D 50/200 051144-98938
3/4"dia. x 11/2"L x 1/8" CH 747D 50/200 051144-80797
3/4"dia. x 11/2"L x 1/4" CH 747D 50/200 051144-80798
Full T aper
1/2"dia. x 11/2"L x 1/8" CH 747D 50/200 051144-80787
3/4"dia. x 11/2"L x 1/8" CH 747D 50/200 051144-80786 051144-80785 051144-80788
Full Taper Regular
126
127
128
Maximum Operating RPMs:
1/2" and smaller dia. – 24,000
5/8 3/4" dia. – 16,000
1" dia. – 12,000
62
3MTM 241D Three-M-ite TM Resin Bond Cloth
X Wt.
These resin bond cartridge rolls provide greater heat and
moisture resistance than glue type products and will usually
produce a higher rate of cut and longer life.
Grade and UPC No.*
Size Prod. Pkg.
Dia x W x AH I.D. Min./Unit 36 40 50 60 80 100 120 150 180 240 320
Regular
3/16"x 1"x 3/32"241D 50/200 96939 96940 96941 96942 96943 96944 96945 96946 96947
1/4"x 3/4"x 1/8"241D 50/200 96948 96949 96950 96951 96952 96953 96954 96955 96956
1/4"x 1"x 1/8"241D 50/200 96957 96958 96959 14021 96960 96961 96962 96963 96964 96965
1/4"x 11/2"x 1/8"241D 50/200 96966 96967 96968 96969 96970 96971 96972 96973 96974 96975
1/4"x 2"x 1/8"241D 50/200 96976 96977 96978 96979 96980 96981 96982 96983 96984
5/16"x 1"x 1/8"241D 50/200 96985 96986 96987 96988 96989 96990 96991 96992 96993 96994
5/16"x 11/2"x 1/8"241D 50/200 96995 96996 96997 96998 96999 97000 97001 97002 97003
3/8"x 1"x 1/8"241D 50/200 97004 97005 14024 14023 97006 14022 97007 97008 97010
3/8"x 11/2"x 1/8"241D 50/200 96938 97011 97012 97013 97014 97015 97016 97017 97018 97019
3/8"x 2"x 1/8"241D 50/200 97020 97021 97022 97023 97024 97025 97026 97027 97028
1/2"x 3/4"x 1/8"241D 50/200 97029 97030 97031 97032 97033 97034 97035 97036 97037 97038
1/2"x 1"x 1/8"241D 50/200 97039 97040 97041 97042 97043 97044 97045 97046 97047 97048
1/2"x 1"x 3/16"241D 50/200 97049 97050 97051 97052 97053 97054
1/2"x 11/2"x 1/8"241D 50/200 97055 97056 97057 14028 14027 14026 97058 97059 97061 97062
1/2"x 2"x 1/8"241D 50/200 97063 97064 97065 97066 97067 97068 97069 97070 97071 97072
1/2"x 2"x 3/16"241D 50/200 97073 97074 97075 97076 97077 97092 97093 97578 97094 97095
5/8"x 1"x 3/16"241D 50/200 97096 97097 97098 97099 97100 97101 97102 97103
5/8"x 11/2"x 1/8"241D 50/200 97104 97105 97106 97107 97108 97109 97110 97111 97112
5/8"x 11/2"x 3/16"241D 50/200 97113 97114 97115 97116 97117 97118 97119 97120 97121 97122
5/8"x 2"x 3/16"241D 50/200 97123 97124 97125 97126 97127 97128 97129 97130 97131 97132
3/4"x 1"x 1/8"241D 50/200 97133 97134 97135 97136 97137 97138 97139 97140
3/4"x 11/2"x 1/8"241D 50/200 97151 97152 14029 97153 97154 97155 97156 97157
3/4"x 11/2"x 3/16"241D 50/200 97159 97160 97161 97162 97163 97164 97165 97166 97167 97168
3/4"x 11/2"x 1/4"241D 50/200 97158 97141 97142 97143 97144 97145 97146 97147 97148 97149 97150
3/4"x 2"x 1/8"241D 50/200 97176 97177 97178 97179 97180 97181 97182 97183 97184
3/4"x 2"x 3/16"241D 50/200 97185 97186 97187 97188 97189 97190 97191 97192 97193 97194 97195
3/4"x 2"x 1/4"241D 50/200 97169 97170 97171 97172 97173 97174 97175
1"x 11/2"x 3/16"241D 50/200 97206 97207 97208 97209 97210 97211 97212 97213 97214 97215 97216
1"x 11/2"x 1/4"241D 50/200 97196 97197 97198 97199 97200 97201 97202 97203 97204 97205
1"x 2"x 3/16"241D 50/200 97228 97229 97230 97231 97232 97233 97234 97235 97236 97237
1"x 2"x 1/4"241D 50/200 97217 97218 97219 97220 97221 97222 97223 97224 97225 97226 97227
Full T aper
3/8"x 1"x 1/8"241D 50/200 97238 97239 97240 97241 97242 97243 97244 97245 97246
3/8"x 11/2"x 1/8"241D 50/200 97247 97248 97249 97250 97251 97252 97253 97254
1/2"x 1"x 1/8"241D 50/200 97255 97256 97257 97258 97259 97260 97261 97262
1/2"x 11/2"x 1/8"241D 50/200 97263 97264 14034 14033 97265 14032 97266 97267 97268 97269
1/2"x 2"x 1/8"241D 50/200 97270 97271 97272 97273 97274 97275 97276 97277 97278
5/8"x 1"x 1/8"241D 50/200 97279 97280 97281 97282 97283 97284 97285 97286 97287
5/8"x 11/2"x 1/8"241D 50/200 97288 97289 97290 97291 97292 97293 97294 97295 97296
3/4"x 1"x 3/16"241D 50/200 97297 97298 97300 97301 97302 97303 97304 97305 97306 97307
3/4"x 11/2"x 1/8"241D 50/200 97318 97319 97320 97321 97323 97324 97325 97326 97327 97328
3/4"x 11/2"x 3/16"241D 50/200 97329 97330 97331 97332 97333 97334 97335 97336 97337 97338 97339
3/4"x 2"x 3/16"241D 50/200 97340 97341 97342 97343 97344 97345 97346 97347 97348 97349 97350
1"x 1"x 3/16"241D 50/200 97373 97374 97375 97376 97377 97378 97379 97380 97381 97382
1"x 11/2"x 1/8"241D 50/200 97394 97395 97396 97397 97398 97399 97400 97401 97402 97403 97404
1"x 11/2"x 3/16"241D 50/200 97405 97406 97407 97408 97409 97410 97411 97412 97413
1"x 11/2"x 1/4"241D 50/200 97383 97384 97385 97386 97387 97388 97389 97390 97391 97392 97393
1"x 2"x 3/16"241D 50/200 97414 97415 97416 97417 97418 97419 97420 97421 97422 97423
* Add Prefix 051144- to UPC No. when ordering.
Kut stock items
129
63
3MTM 211K Three-M-iteTM Elek-Tro-CutTM
Cloth J Wt.
3MTM 241K Three-M-ite TM Elek-Tro-CutTM
Cloth X Wt.
These glue bond cartridge rolls are available in regular or
full-tapered shapes, and provide a handy, durable abrasive
tool for grinding and finishing those hard-to-reach areas.
Grade and UPC No.*
Size Prod. Pkg.
Dia x W x AH I.D. Min./Unit 36 40 50 60 80 100 120 150 180 240 320
Regular
1/4"x 1"x 1/8"211K 50/200 40030
3/8"x 1"x 1/8"211K 50/200 40021
3/8"x 11/2"x 1/8"211K 50/200 40012
1/2"x 11/2"x 1/8"211K 50/200 40009 40040
1/2"x 11/2"x 1/8"241K 50/200 40010
Full T aper
1/2"x 1"x 1/8"211K 50/200 40043
1/2"x 11/2"x 1/8"211K 50/200 40042 40041
* Add Prefix 051144- to UPC No. when ordering.
Kut stock items
Accesso ries – Cartridge Rolls
3MTM Mandrels and Spindle
Screw type mandrels and forked spindle holders for cartridge
rolls.
Diameter Length Shank UPC No.
Mandrels
3/32"3/4"1/4"051144-45120
1/8"1"1/4"051144-45119
3/16"11/2"1/4"051144-45118
3/16"1"1/4"051144-45117
1/4"11/2"1/4"051144-45116
Spindle
1/4"1/4"051144-45121
3M Mandrels
3M Spindle (forked)
Shank
Dia. Pilot
Dia.
Pilot
Shank
Dia.
Pilot
Length
131
130
Maximum Operating RPMs:
1/2" and smaller dia. – 24,000
5/8 3/4" dia. – 16,000
1" dia. – 12,000
64
Evenrun Bands
Evenrun bands are constructed of sharp, well-bonded mineral,
coated on a strong drills cloth backing and spirally wound
over a cloth inner liner. This forms an abrasive-surfaced
cylinder that can rotate smoothly in either direction. This
easy-to-use product provides a fast, continuous cut and long-
life performance so as to get lower costs per work piece.
3MTM 747D RegaliteTM PolycutTM RB Cloth
X Wt.
A premium constructed Evenrun Band utilizing 3M’s
Cubitron & aluminum oxide minerals. An outstanding value
for use on a variety of exotic and other metals.
Grade and UPC No.*
Size Pkg.
Dia. x WD Prod. I.D. Min./Unit 36 40 50 60 80 100 120 150 180 240 320
1/2"x 1"747D 50/200 80765 80769 80773
1"x 1"747D 50/200 80766 80770 80774 80782
2"x 1"747D 50/200 80771 80775 80783
3"x 1"747D 50/200 80772 80776
* Add Prefix 051144- to UPC No. when ordering.
Kut stock items
134133
132
65
3MTM 241D Three-M-ite TM RB Cloth X Wt.
This product is constructed of sharp, resin bonded aluminum
oxide grain, coated on a strong drills cloth backing and spiral-
ly wound over a cloth inner liner. It forms an abrasive-sur-
faced cylinder that can rotate smoothly in either direction.
This easy-to-use product provides a fast, continuous cut and
long-life performance so as to get lower costs per workpiece.
Grade and UPC No.*
Size Prod. Pkg.
Dia. x WD I.D. Min./Unit 36 40 50 60 80 100 120 150 180 240 320
1/4"x 1/2"241D 50/200 97425 97426 40243 97427 97428 97429 97430 97431 97432
3/8"x 1/2"241D 50/200 97433 97434 97435 97436 97437 97438 97439 97440
3/8"x 1"241D 50/200 97442 97443 97444 97445 97446 97447 97448 97449 97450
1/2"x 1/2"241D 50/200 97451 97452 97453 40228 40227 40226 40252 97455 97456 40256 97457
1/2"x 1"241D 50/200 97458 97459 40225 40224 40247 11973 97460 97461 97462 97463
1/2"x 11/2"241D 50/200 97464 97465 97466 97467 97468 97469 97470 97471 97472 97473 97474
1/2"x 2"241D 50/200 97475 97476 97477 97478 97479 97480 97481 97482 97483 97484 97485
3/4"x 1/2"241D 50/200 97486 97487 97488 97489 40242 97490 97491 97492 97493 97494 97495
3/4"x 3/4"241D 50/200 97496 97497 97498 97499 40223 97500 40250 97579 97501 97502 97503
3/4"x 1"241D 50/200 11976 97504 40236 40221 40220 40244 40219 97505 97506 97507 97508
3/4"x 11/2"241D 50/200 11977 97509 97454 11978 40241 97510 97511 97512 97513 97514 97515
3/4"x 2"241D 50/200 97516 97517 97518 97519 97520 97521 97522 97523
1"x 1/2"241D 50/200 97527 97528 97529 97530 97531 97532 97533 97534 97535 97536 97537
1"x 1"241D 50/200 40214 40213 40212 40211 40210 40209 40208 97538 97539 97540 97541
1"x 11/2"241D 50/200 40207 97542 40265 11980 40205 97543 11981 97544 97545 97546 97547
1"x 2"241D 50/200 97548 97549 97550 40268
1"x 3"241D 50/200 97558 97559 97560 97561 97562 97563 97564 97565 97566 97567 97568
11/2"x 1"241D 50/200 40203 11982 97569 40202 40201 97570 97571 97572 97573 97574 97575
11/2"x 11/2"241D 50/200 40200 40199 11984 40197 40196 97576 40274 97580 97581 97582 97583
11/2"x 2"241D 50/200 11985 97584 11987 40267 40270 97585 97586 97587 97588 97589
2"x 1"241D 50/200 40193 97590 97591 40192 11990 97592 11991 97593 97594 97595 97596
2"x 11/2"241D 50/200 97597 97598 97599 40189 40188 97600 97601 97602 97603 97604
2"x 2"241D 50/200 40187 40186 40185 40184 40183 97605 11994 97606 97607 97608 97609
3"x 1"241D 50/200 40179 97610 97611 40269 97612 97613 97614 97615
3"x 2"241D 50/200 97616 97617 97618 97619 97620 97621 97622 97623 97624 97625 97626
3"x 3"241D 50/200 40178 40176 40175 40174 97627 40172 97628 97629 97630 97631
*Add Prefix 051144- to UPC No. when ordering.
Kut stock items
135
66
Accessories – Evenrun Bands
3MTM Rubber Slotted Expander Wheels
Slotted wheels available in a wide variety of sizes for use
with Evenrun bands and belts.
Max. Oper.
Diameter Width Shank RPMs UPS No.*
1"1"1/4"18,000 051144-77717
11/2"1"1/4"14,000 051144-77718
2"1"1/4"12,000 051144-77720
2"2"1/4"6,000 051144-77721
3"3"5/8" – 11 thread 6,000 051144-77722
internal
3MTM Rubber Cushion Polishing Wheels
Available in a wide variety of sizes for use with Evenrun
bands and belts.
Tighten nut to secure
Evenrun Band onto wheel.
Max. Oper.
Diameter Width Shank RPMs UPS No.*
1/4"1/2"1/8"23,000 051144-45159
3/8"1/2"1/8"23,000 051144-45158
3/4"3/4"1/8"15,000 051144-45147
1/2"1/2"1/4"30,000 051144-45156
1/2"3/4"1/4"15,000 051144-45154
1/2"1"1/4"15,000 051144-45153
1/2"11/2"1/4"15,000 051144-45152
3/4"1/2"1/4"30,000 051144-45148
3/4"3/4"1/4"24,000 051144-45146
3/4"1"1/4"17,000 051144-45145
3/4"11/2"1/4"10,000 051144-45144
1"1"1/4"18,000 051144-45139
1"11/2"1/4"10,000 051144-45138
1"2"1/4"8,000 051144-45137
11/4"1"1/4"15,000 051144-45136
11/2"1"1/4"14,000 051144-45132
11/2"11/2"1/4"10,000 051144-45131
11/2"2"1/4"8,000 051144-45130
2"1"1/4"11,000 051144-45129
2"11/2"1/4"8,000 051144-45128
2"2"1/4"6,000 051144-45127
3"3"3/8"3,000 051144-45124
3"3"1/2"3,000 051144-45123
* Part numbers apply to complete wheel not cushions.
Dia.
Width
Width
Dia.
Centrifugal force while tool
is running holds Evenrun
Bands on expander wheels.
136
137
67
3MTM Cross Pads
3M Cross Pads are used for close tolerance polishing of small
radii and channels, deburring the ends and insides of tubing
and many other special applications.
Grade and UPC No.
Pkg.
Size Prod. I.D. Min./Unit 60 80 100 120
3/4"x 3/8", 8 ply, 348 Eyelet 241D 50/100 051144-97724 051144-97725 051144-97726
1"x 3/8", 8 ply, 348 Eyelet 241D 50/100 051144-97727 051144-97728 051144-97729
11/2"x 1/2", 8 ply, 832 Eyelet 241D 50/100 051144-97730 051144-97731 051144-97732
2"x 1/2", 8 ply, 832 Eyelet 241D 50/100 051144-97733 051144-97734 051144-97735
2"x 3/4", 8 ply, 832 Eyelet 241D 50/100 051144-97736 051144-97737 051144-97738
2"x 3/4", 8 ply, (1/4-20 Eyelet) 241D 50/100 051144-97739 051144-97740 051144-97741
2"x 3/4", 10 ply, (1/4-20 Eyelet) 241D 50/100 051144-97742
2"x 1", 8 ply, (1/4-20 Eyelet) 241D 50/100 051144-97743 051144-97744
2"x 1", 10 ply, (1/4-20 Eyelet) 241D 50/100 051144-97745 051144-97746
21/4"x 1/2", 8 ply, 832 Eyelet 241D 50/100 051144-97747 051144-97748 051144-97749
21/2"x 3/4", 8 ply, (1/4-20 Eyelet) 241D 50/100 051144-97750 051144-97751 051144-97752
21/2"x 3/4", 10 ply, (1/4-20 Eyelet) 241D 50/100 051144-97753 051144-97754
3"x 1", 8 ply, (1/4-20 Eyelet) 241D 50/100 051144-97755 051144-97756 051144-97757
3"x 1", 10 ply, (1/4-20 Eyelet) 241D 50/100 051144-97758 051144-97759
3"x 11/2", 8 ply, (1/4-20 Eyelet) 241D 50/100 051144-97760 051144-97761
3"x 11/2", 10 ply, (1/4-20 Eyelet) 241D 50/100 051144-97762 051144-97763 051144-97764
31/2"x 11/2", 8 ply, (1/4-20 Eyelet) 241D 50/100 051144-97765 051144-97766 051144-97767
4"x 1", 8 ply, (1/4-20 Eyelet) 241D 50/100 051144-97768 051144-97769 051144-97770
4"x 1", 10 ply, (1/4-20 Eyelet) 241D 50/100 051144-97771 051144-97772
4"x 11/2", 8 ply, (1/4-20 Eyelet) 241D 50/100 051144-97773 051144-97774 051144-97775
41/2"x 11/2", 10 ply, (1/4-20 Eyelet) 241D 50/100 051144-97776 051144-97777 051144-97778 051144-97779
5"x 11/2", 8 ply, (1/4-20 Eyelet) 241D 50/100 051144-97780 051144-97781 051144-97782
6"x 11/2", 8 ply, (1/4-20 Eyelet) 241D 50/100 051144-97783 051144-97784 051144-97785
6"x 2", 8 ply, (1/4-20 Eyelet) 241D 50/100 051144-97786
Kut stock items
Grade and UPC No.
Pkg.
Size Prod. I.D. Min./Unit 60 80 120
2"x 2" x 1/2"241D 50/100 051144-97709 051144-97710
2"x 2" x 3/8"241D 50/100 051144-97711 051144-97712 051144-97713
21/2"x 21/2" x 1/4"241D 50/100 051144-97714
21/2"x 21/2" x 3/8"241D 50/100 051144-97715 051144-97716
21/2"x 21/2" x 1/2"241D 50/100 051144-97717 051144-97718
3"x 3" x 1/4"241D 50/100 051144-97721 051144-97722 051144-97723
3"x 3" x 3/8"241D 50/100 051144-97719 051144-97720
Kut stock items
3MTM Square Pads
3M Square Pads are ideal for fast grind-blending on channels,
fillets, corners or spotting on flat surfaces. As the pad rotates,
the corners exert a fast, biting action and gradually wear-
down, constantly exposing fresh abrasive.
138
139
68
3MTM Square/Cross Pad Mandrel
Case
Size Quantity UPC No.
1/4"Dia. x 8 – 32 external thread 1 051144-14307
1/4"Dia. x 1/4– 20 external thread 1 051144-14308
Max. Oper.
Square Pad Size Eyelet RPMs
2"x 2"1/4" – 20 12,000
21/2"x 21/2"1/4" – 20 10,000
3"x 3"1/4" – 20 9,000
Max. Oper.
Cross Pad Siz e Ply Eyelet RPMs
Less than 2"8 or 10 8–32 24,000
2"8 or 10 1/4"– 20 20,000
2"8 or 10 8–32 18,000
3"8 or 10 1/4"– 20 18,000
31/2"8 or 10 1/4"– 20 15,000
4"and 41/2"8 or 10 1/4"– 20 12,000
5"8 or 10 1/4"– 20 10,000
6"8 or 10 1/4"– 20 9,000
140
69
Miscellaneous –
Coated Abrasive
Products
3MTM 415U/415N StikitTM Tri-M-iteTM Silicon
Carbide Refill Rolls
Stikit refill rolls are one long continuous strip of abrasive
with the adhesive already applied. Operators use ALL the
abrasive taken from the roll…with conventional methods, a
great deal of the abrasive is wasted since it must be wrapped
around a block and is not used for sanding. Stikit abrasives,
used in conjunction with a sanding block, also eliminate
many of the problems associated with hand sanding, such as
splinters and finger marks on the wood surface from uneven
sanding pressure. And Stikit refill rolls, unlike loose abra-
sives, do not end up on the floor of the plant where they’re
apt to be swept up at the end of the day, causing unnecessary
waste.
Grade and UPC No.*
Pkg.
Size Prod. I.D. Min./Unit 80A 100A 120A 150A 180A 220A 240A 280A 320A
21/2"wide 415U 10/50 14475 16287 16286 16285 16284 16283
31/4"wide 415U/415N 10/50 14476 16295 16294 16293 16292 16291 16289 **16288
* Add Prefix 051144- to UPC No. when ordering.
** 415N
StikitTM Sanding Blocks
Sanding blocks are made of a tough plastic for long life and
durability. Sand into corners with the flat end…Sand into
curved or contoured areas with the rounded end. The cush-
ioned back-up pad is durable and holds the abrasive firmly in
place. Discover their versatility in top coat sanding,
Size Pkg. Min./Unit UPC No.
21/2"wide 10 051144-45203
31/4"wide 10 051144-45204
141
142
sealer and whitewood sanding, metal preparation, plastics,
paint repair areas, and many more.
70
3MTM Sanding Sponges
3M offers a broad selection of sanding sponges with different
features and densities for both flat and contoured
surfaces…ideal for corners, contours, sealer and flat surfaces
on wood, metal, plastic and paint.
143
Top Coat Rubbing Kit
Scotch-Brite Rolls for topcoat rubbing
provide consistency and uniformity…beautiful hand rubbed
look
are available in a wide range of types and grades…produce
the finish you needlow to high gloss
won’t cut hands…safer for operators to use than steel wool
Product Contents
410S 40 sheets 401Q Wetordry Tri-M-ite P600 grade paper 32/3"x 9"
40 sheets 401Q Wetordry Tri-M-ite P800 grade paper 32/3"x 9"
40 sheets 401Q Wetordry Tri-M-ite P1000 grade paper 32/3"x 9"
40 sheets 401Q Wetordry Color Sanding P1200 grade paper 32/3"x 9"
6 sheets Scotch-Brite Clean and Finish T 4"x 211/2"
6 sheets Scotch-Brite Clean and Finish S ULF 4"x 101/2"
4 sheets Scotch-Brite High Gloss 4"x 101/2"
Scotch-Brite Super Polish 4"x 101/2"
1 3M Compound Six Pack
1 bottle Finesse-it Compounding Material Ebony 12 oz.
1 bottle Finesse-it Compounding Material Ivory 12 oz.
1 bottle Finesse-it Finishing Material Ebony 12 oz.
1 bottle Finesse-it Finishing Material Ivory 12 oz.
1 bottle Finesse-it Final Finish Easy Clean-up 12 oz.
1 bottle Finesse-it Protective Wax 12 oz.
1 each Demo Video
Product Kits/Case UPC No.
410S 1 048011-16404
144
Grade and UPC No.
Min.
Product Size Pkg./Case MED FIN SFN
3M Full Size Sanding Sponge 33/4"x 25/8" x 1"24/48 051115-00408 051115-00409
3M Softback Sanding Sponge 51/2"x 41/2" x 3/16"20/120 051131-02606 051131-02604 051131-02602
Grade and UPC No.
Bulk Packed Min.
Product Size Pkg./Case MED FIN SFN
3M Full Size Sanding Sponge 33/4"x 25/8" x 1"250/Case 051115-06967 051115-06968
3M Softback Sanding Sponge 51/2"x 41/2" x 3/16"250/Case 051115-06966 051115-06965 051115-06964
3M High Flexibility Sanding Sponge 33/4"x 33/4" x 1/2"108/Case 051115-00630 051115-00631
3M Flexible Sanding Pad 43/4"x 33/4" x 1/2"250/Case 051115-02622 051115-02623
Grade and UPC No.
Min.
Product Size Pkg./Case 60 80 100 150
3M Brand Pro-Pad 4"x 27/8" x 1/2"108/Case 051115-07057 051115-07058 051115-07059 051115-07060
Sanding Sponge
71
3MTM Flexible
Diamond Pr oducts
Achieve better finisheswithout sacrificing cut rates on
hard-to-grind materials with 3M Flexible Diamond Products.
A metal plated bond or tough resin bond securely anchors
micron graded diamonds to our premium, flexible backing
material to offer durability and longer life, while allowing
conformance to a variety of contours. The open dot pattern
produces aggressive cutting action and reduces loading.
3MTM 6200J Hand Pads Micron Grade and UPC No.*
Size Pads/Case M250 M125 M74 M40 M20 M10 R30 R10
21/4"x 33/4"10 14998 14999 80098 80099 80100 81895 80101 80102
21/4"x 4"10 14983 14984 14985 14986 14987 14988 14989
3"x 3"10 14976 14977 14978 14979 14980 14981 14982
* Add Prefix 051144- to UPC No. when ordering.
Micron Grade and UPC No.*
Size Items/Case M125 M74 M40 M20
4"x 1"(DW41) 5 84361 84362 84363 84364
6"x 2" (DW62) 5 84365 84366 84367 84368
8"x 3" (DW83) 3 84369 84370 84371 84372
* Add Prefix 051144- to UPC No. when ordering.
Micron Grade and UPC No.*
Size Items/Case M74 M40 M20
1"x 4"(DW61) 5 85921 85922 85923
2"x 6"(DW42) 5 85924 85907 85908
* Add Prefix 051144- to UPC No. when ordering.
3MTM 6223J Professional Diamond
Whetstone
Professional Diamond Whetsones will give you a perfect
edge on all your blades and tools.
3MTM 6220J Whetstone
Used for precision faceting, sharpening chisels, blades, car-
bide tools, etc.
147
146
145
72
Disc Micron Grade and UPC No.*
Diameter Discs/Case M250 M125 M74 M40 M20 M10
1"10 84373 84374 84375 84376 84377 84378
11/2"10 84381 84382 84383 84384 84385 84386
3"5 80189 80190 80191 80192 80193 84397
* Add Prefix 051144- to UPC No. when ordering.
Disc Micron Grade and UPC No.*
Diameter Discs/Case M250 M125 M74 M40 M20 M10 R30 R10
1"10 84398 84399 85232 85233 85234 85235 85236 85237
11/2"10 85238 85239 85240 85241 85242 85243 85244 85245
2"10 85246 85247 85248 85249 85250 85251 85252 85253
3"5 85254 85255 85256 85257 85258 85259 85260 85261
* Add Prefix 051144- to UPC No. when ordering.
3MTM 6002J QRS Discs
Aggressive, clean-cutting and long lasting. Ideal for finishing,
touch-ups or repair of hard to grind materials: ceramics, com-
posites, glass, carbide, stone, marble and fiberglass. Excellent
for polishing dies and molds.
Hook-and-Loop backing makes changing discs easy, just pull
off the disc in use and press on another. Intended for use with
3M Hookit Roloc Disc Pad, Type J.
3MTM 6234J TG Discs
From tough grinding applications through fine finishing
operations, 3M Roloc Flexible Diamond Discs can do the
job quickly with consistent, predictable results.
Can be used on right angle and straight air tools as well as
flexible shaft grinders. Must be used with proper 3M Roloc
disc pad hardware.
148
149
73
Micron Grade/Color/UPC No.
Size M125 (Black) M74 (Red) M40 (Yellow) M20 (White)
11/2"x 3/4"051144-80829 051144-80830 051144-80831 051144-80832
13/4"x 1/2"051144-80833 051144-80834 051144-80835 051144-80836
13/4"x 1/2"half round 051144-80837 051144-80838 051144-80839 051144-80840
21/2"x 1/4"051144-80841 051144-80842 051144-80843 051144-80844
Sets
Assorted 051144-80130 051144-80131 051144-80132 051144-80133
3MTM Diamond Files
Diamond files are highly versatile — great for many uses:
grind hard-to-cut materials, fine-finish delicate sur-
faces, bevel edges, remove burrs, sharpen tools.
Use wet or dry. For better results, use with water or an oil
lubricant.
Available in sets of 4 file sizes and a choice of 3 grades,
from 125 micron to 20 micron.
The different micron grades are conveniently color coded.
Packaging:
SETS: consist of 4 files, one of each size. All files in a set are
the same grade.
FILES: Minimum package = 10 files per box. 5 boxes/unit.
Files may not be assorted within a box.
Accessories Flexible Diamond Products
3MTM HookitTM RolocTM Disc Pad, Type J
This resilient, conformable pad is ideal for use on shaped and
contoured surfaces. Hook material attached to neoprene foam
which provides a resilient base for Flexible Diamond QRS
discs. Makes grade changes easy. Pads must be used with
proper 3M Roloc disc pad hardware as listed on page 17.
Size Quantity UPC No.
1" dia. 10 051144-82564
11/2"dia. 5 051144-82565
2" dia. 5 051144-82566
3" dia. 1 051144-82567
150
151
3
Abrasive Systems Division
3M Center, Building 223-6N-01
St. Paul, MN 55144-1000
Important Notice:
3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. This brochure is intended to be an intro-
ductory summary of 3M products. The information provided is based on typical condi-
tions and is believed to be reliable. However, many factors beyond the control of 3M
can affect the use and performance of 3M products in a particular application. Since
these factors are uniquely within the user ’s knowledge and control, it is essential that the
user evaluate the 3M product to determine whether the product is fit for the particular
application. All details concerning product specifications are available from 3M. Always
read and follow instructions for use and wear appropriate protection for eyes, face,
hands and body. Do not exceed maximum RPM’s. Use guards provided with machine.
LIMITATION OF REMEDIES AND LIABILITY: If the 3M product is proven to be
defective THE EXCLUSIVE REMEDY, AT 3M’S OPTION, SHALL BE TO REFUND
THE PURCHASE PRICE OF OR REPLACE THE DEFECTIVE 3M PRODUCT. 3M
shall not otherwise be liable for any loss or damages, whether direct, indirect, special,
incidental, or consequential, regardless of the legal theory asserted, including tort, con-
tract, negligence, warranty, or strict liability.
Safety Information
Always use appropriate protective glasses, face shields and body protection. Do not
exceed maximum operating RPM’s. Use guards provided with machine. Follow safety
operation procedures posted in work areas.
Distributed by:
Printed on 10% post-consumer waste paper.
E
For More Information
and Assistance:
3M coated abrasive and surface conditioning products can
improve quality, consistency and productivity to help you
achieve better results more cost-effectively.
Contact your local 3M coated abrasive or surface condition-
ing products distributor or 3M at the numbers listed below.
For the contiguous 48 United States
Call ............................1-800-742-9546
Fax .............................1-800-852-4668
For: Alaska.............................907-522-5200
Canada...........................519-451-2500
Hawaii............................808-422-2721
Northern Mexico...........915-599-4685
Puerto Rico....................809-750-3000
©3M 1999
60-4400-0168-7(399)JR