0.8 mm pitch connector For PCB Right-angle SMT type female connector for PCB HDRA-ED136LFZGT( )-( )+ Right-angle SMT ANSI/SFF8441 Configuration of product Part No. HDRA- ED 136 LFZ G T ( )- ( )+ Series name Form of shell Blank: Standard shell No. of contacts: 136 A: Shell with flange for EMI Type of contact LFZ: Right-angle SMT type, Lock screws L: Provided female (Panel thickness: t = 1.12 mm or less) Contact plating G: 0.76 m Gold plate Ground lock pins with hold downs POS.#68 (CN1) CN2 9.40.03 2.350.025 4.70.025 2.11250.05 7.050.025 2.350.025 4.70.03 5.8250.05 : PAD 4 0.8 0.833=26.4 29.5 3.925 12.7 4 37.70.1 -0 34.70.1 R Recommended panel cut-out dimensions HDRA-ED68FYG+ o0.8 Taping packages are available for automatically mounting board connectors on a PCB. The product part number of the taping package is HDRA-ED68FYG-TP2. One reel provides 1000 board connectors. (500 sets. Two board connectors can be mounted at a time using a cap.) The reel diameter is 380 mm. The tape width is 56 mm. Mounting Method of Right-angle SMT type Female Connector for PCB Main body (HDRA-ED136LFZGT( )-L+) SMT type board connectors 12.84 5.840.05 0.1 10.72-0 2.40.08 TM 0.8 32.35 41.9 Edge of PCB 0.2 4.05-0.15 POS.#68 (CN2) 4.6 35 POS.#2(CN2) POS.#1(CN2) 0.450.025 0.80.03 0.833=26.40.05 27.150.025 29.3750.025 30.6250.025 34.150.03 34.5250.05 Recommended PCB layout t=1.6mm * 2.85 1 34 1 68 CN1 1.4 35 68 34 POS.#2 (CN2) POS.#1 (CN2) 12.84 4.5 5.84 POS.#1 (CN1) 0.15 2-o1.95-0 42.7 37.7 31.65 28.3 0.833=26.4 POS.#2 (CN1) 3.46 (Four lock screws are supplied with a connector.) 0.7 43.37 0.7 2-o2.450.1 (PAD) 0.1 2-o1.75-0 (P.T.H.) 1.30.03 26.45 21.25 8.9850.05 7.750.03 POS.#68(CN2) 4.2250.03 POS.#1(CN1) 2.9750.03 0.05 4-o0.9-0 0.750.025 POS.#2(CN1) POS.#68(CN1) 10MAX. 6.4250.03 Select the connector according to panel thickness. For the application without panel, use washers or special lock screw (P/N: HDRAE68LFD-7C). (HDRA-ED68FYG+) PCB Flange for EMI After board connectors are mounted on a PCB, mate them with the main body, and solder hold downs and ground lock pins. 68 Components 34 Contacts Insulator D Shell 1 TM Insulator A Insulator E Lock screws Insulator B Insulator F Hold downs Insulator C * Shell connection hardware 35 1 34 68 35 HDRA-ED136LFZGTA+ Mating connector: HDRA series IDC type male cable connector, or straddle SMT type male connector Through hole SMT Press-in IDC Wire Soldering Crimping wrapping Others