BCP55 BCP55 C E C B SOT-223 NPN General Purpose Amplifier This device is designed for general purpose medium power amplifiers and switching circuits requiring collector currents to 1.0 A. Sourced from Process 38. See BCP54 for characteristics. Absolute Maximum Ratings* Symbol TA = 25C unless otherwise noted Parameter Value Units 60 V VCEO Collector-Emitter Voltage VCBO Collector-Base Voltage 60 V VEBO Emitter-Base Voltage 5.0 V IC Collector Current - Continuous TJ, Tstg Operating and Storage Junction Temperature Range 1.5 A -55 to +150 C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Thermal Characteristics Symbol PD RJA TA = 25C unless otherwise noted Characteristic Total Device Dissipation Derate above 25 C Thermal Resistance, Junction to Ambient 1997 Fairchild Semiconductor Corporation Max Units BCP55 1.5 12 83.3 W mW/C C/W (continued) Electrical Characteristics Symbol TA = 25C unless otherwise noted Parameter Test Conditions Min Max Units OFF CHARACTERISTICS V(BR)CEO IC = 10 mA, IB = 0 V(BR)CBO Collector-Emitter Breakdown Voltage Collector-Base Breakdown Voltage 60 V IC = 100 A, IE = 0 60 V V(BR)EBO Emitter-Base Breakdown Voltage IE = 10 A, I C = 0 5.0 V I CBO Collector-Cutoff Current I EBO Emitter-Cutoff Current VCB = 30 V, IE = 0 VCB = 30 V, IE = 0, T A = 125C VEB = 5.0 V, I C = 0 100 10 10 nA A A ON CHARACTERISTICS hFE DC Current Gain VCE(sat) Collector-Emitter Saturation Voltage IC IC IC IC = 5.0 mA, VCE = 2.0 V = 150 mA, VCE = 2.0 V = 500 mA, VCE = 2.0 V = 500 mA, I B = 50 mA VBE(on) Base-Emitter On Voltage I C = 500 mA, VCE = 2.0 V 25 40 25 250 0.5 V 1.0 V BCP55 NPN General Purpose Amplifier SOT-223 Tape and Reel Data and Package Dimensions SOT-223 Packaging Configuration: Figure 1.0 Customized Label Packaging Description: F63TNR Label Antistatic Cover Tape SOT-223 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 2,500 units per 13" or 330cm diameter reel. The reels are dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 500 units per 7" or 177cm diameter reel. This and some other options are further described in the Packaging Information table. These full reels are individually barcode labeled and placed inside a standard intermediate box (illustrated in figure 1.0) made of recyclable corrugated brown paper. One box contains two reels maximum. And these boxes are placed inside a barcode labeled shipping box which comes in different sizes depending on the number of parts shipped. Static Dissipative Embossed Carrier Tape F852 014 F852 014 F852 014 F852 014 SOT-223 Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Reel Size Box Dimension (mm) Standard (no flow code) TNR 2,500 D84Z SOT-223 Unit Orientation TNR 500 13" Dia 7" Dia 343x64x343 184x187x47 Max qty per Box 5,000 1,000 Weight per unit (gm) 0.1246 0.1246 Weight per Reel (kg) 0.7250 0.1532 343mm x 342mm x 64mm Intermediate box for Standard F63TNR Label Note/Comments F63TNR Label F63TNR Label sample 184mm x 184mm x 47mm Pizza Box for D84Z Option SOT-223 Tape Leader and Trailer Configuration: Figure 2.0 LOT: CBVK741B019 QTY: 3000 FSID: PN2222A SPEC: D/C1: D9842 D/C2: QTY1: QTY2: SPEC REV: CPN: N/F: F (F63TNR)3 Carrier Tape Cover Tape Components Trailer Tape 300mm minimum or 38 empty pockets Leader Tape 500mm minimum or 62 empty pockets September 1999, Rev. B SOT-223 Tape and Reel Data and Package Dimensions, continued SOT-223 Embossed Carrier Tape Configuration: Figure 3.0 P0 D0 T E1 F K0 Wc W E2 B0 Tc A0 D1 P1 User Direction of Feed Dimensions are in millimeter Pkg type SOT-223 (12mm) A0 6.83 +/-0.10 B0 7.42 +/-0.10 W 12.0 +/-0.3 D0 D1 1.55 +/-0.05 1.50 +/-0.10 E1 E2 1.75 +/-0.10 F 10.25 min P1 5.50 +/-0.05 P0 8.0 +/-0.1 4.0 +/-0.1 K0 1.88 +/-0.10 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). T Wc 0.292 +/0.0130 9.5 +/-0.025 0.06 +/-0.02 0.5mm maximum 20 deg maximum Typical component cavity center line B0 Tc 0.5mm maximum 20 deg maximum component rotation Typical component center line Sketch A (Side or Front Sectional View) A0 Component Rotation Sketch C (Top View) Component lateral movement Sketch B (Top View) SOT-223 Reel Configuration: Figure 4.0 Component Rotation W1 Measured at Hub Dim A Max Dim A max See detail AA Dim N 7" Diameter Option B Min Dim C See detail AA W3 13" Diameter Option Dim D min W2 max Measured at Hub DETAIL AA Dimensions are in inches and millimeters Tape Size Reel Option Dim A Dim B 0.059 1.5 512 +0.020/-0.008 13 +0.5/-0.2 0.795 20.2 5.906 150 0.488 +0.078/-0.000 12.4 +2/0 0.724 18.4 0.469 - 0.606 11.9 - 15.4 0.059 1.5 512 +0.020/-0.008 13 +0.5/-0.2 0.795 20.2 7.00 178 0.488 +0.078/-0.000 12.4 +2/0 0.724 18.4 0.469 - 0.606 11.9 - 15.4 12mm 7" Dia 7.00 177.8 12mm 13" Dia 13.00 330 Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL) July 1999, Rev. B SOT-223 Tape and Reel Data and Package Dimensions, continued SOT-223 (FS PKG Code 47) 1:1 Scale 1:1 on letter size paper Part Weight per unit (gram): 0.1246 September 1999, Rev. C TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. HiSeCTM ISOPLANARTM MICROWIRETM POPTM PowerTrench QFETTM QSTM Quiet SeriesTM SuperSOTTM-3 SuperSOTTM-6 ACExTM BottomlessTM CoolFETTM CROSSVOLTTM E2CMOSTM FACTTM FACT Quiet SeriesTM FAST FASTrTM GTOTM SuperSOTTM-8 SyncFETTM TinyLogicTM UHCTM VCXTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. E