POSITIVE ADJUSTABLE
VOLTAGE REGULATOR
Semelab Limited
Semelab LimitedSemelab Limited
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com
Document Number 8374
Issue 1
Page 3 of 5
ELECTRICAL CHARACTERISTICS(1)(3)
(TC = 25°C unless otherwise stated)
LM117A, IP117A, LM117AHV, IP117AHV
Symbols Parameters Test Conditions Min.
Typ Max.
Units
IOUT = 10mA
1.238 1.250 1.262
VREF Reference Voltage 10mA ≤ IOUT ≤ IMAX, P ≤ PMAX,
3V ≤ (VIN-VOUT) ≤ VMAX
●
1.225 1.250 1.270
V
0.005 0.010
IN
OUT
V
V
∆
∆
Line Regulation (2)
3V ≤ (VIN-VOUT) ≤ VMAX,
IOUT = 10mA
●
0.010 0.020
%/V
VOUT ≤ 5V
5 15 mV
VOUT ≥ 5V
0.1 0.3 %
VOUT ≤ 5V
●
15 50 mV
OUT
I
OUT
V
∆
∆ Load Regulation (2)(3) 10mA ≤ IOUT ≤ IMAX
VOUT ≥ 5V
●
0.3 1.0 %
Thermal Regulation VIN = 14.58V, IOUT = 1.5A,
PD = 20W, TA = 25°C, 20ms Pulse
0.002 0.020 %/W
VOUT = 10V CADJ = 0
65
Ripple Rejection
f = 120Hz CADJ = 10µF
●
66 80
dB
IADJ Adjust Pin Current
●
50 100
∆IADJ Adjust Pin Current Change 10mA ≤ IOUT ≤ IMAX,
2.5V ≤ (VIN-VOUT) ≤ VMAX
●
0.2 5
µA
(VIN - VOUT) = 40V
●
3.5 5
IMIN Minimum Load Current (VIN - VOUT) = 60V (HV Series)
(HV Series)(HV Series)
(HV Series)
●
3.5 7
mA
(VIN - VOUT) ≤ 15V
●
1.5 2.2
(VIN - VOUT) = 40V
●
0.3 0.5
ICL Current Limit
(VIN - VOUT) = 60V (HV Series)
(HV Series)(HV Series)
(HV Series)
●
0.1
A
TEMP
OUT
V
∆
∆ Temperature Stability
●
1.0 2
TIME
OUT
V
∆
∆ Long Term Stability TA = 125°C, 1000Hrs
0.3 1.0
en RMS Output Noise
(% of VOUT) TA = 25°C, 10Hz ≤ f ≤ 10KHz
0.001
%
No
NoNo
Notes
testes
tes
The ● denotes the specifications which apply over the full operating temperature range.
(1) Test conditions unless otherwise stated: VIN - VOUT = 5V, IOUT = 0.5A, PMAX = 20W, IMAX = 1.5A
(2) Regulation is measured at constant junction temperature, using pulse testing at a low duty cycle. Changes in output voltage due to heating
effects are covered under thermal regulation specifications. Load regulation is measured at
1
/
8
” below the base of the package on the
output pin.
(3) VMAX = 40V for LM117, IP117, LM117A, IP117A
VMAX = 60V for LM117HV, IP117HV, LM117AHV, IP117AHV