GBPC5002H thru GBPC5010H Glass Passivated Single Phase Bridge Rectifiers Reverse Voltage 200 to 1000V Forward Current 50 Amp Features y y y y Circuit ~ Mechanical Data Case: Molded plastic case Terminals: Plated leads solderable per + - y Glass passivated die construction Integrally molded heatsink provides Very low thermal resistance for Maximum heat dissipation The plastic material used carries UL flammability recognition 94V-0 High surge current capability High temperature soldering guaranteed: 260 /10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3kg) tension MIL-STD-750, Method 2026 Polarity: Marked on Body Mounting Position: Any ~ Module Type TYPE VRRM VRSM GBPC5002H GBPC5004H GBPC5006H GBPC5008H GBPC5010H 200V 400V 600V 800V 1000V 300V 500V 700V 900V 1100V Maximum Ratings and Thermal Characteristics (TA = 25 unless otherwise noted) Symbol IF(AV) Conditions Maximum average forward output rectified current Tc =70 Peak forward surge current single half sine-wave superimposed on rated load (JEDEC Method) IFSM i2t Visol RJC Tj, TSTG Weight Rating for fusing (t<8.3ms) a.c.50HZ;r.m.s.;1min Maximum thermal resistance (1) Operating Junction and storage temperature range Approximate Weight Values Units 50 A 450 A 840 A2s 2500 0.7 -55 to +150 15 V /W g Values Units 1.1 V 5.0 500 A Electrical Characteristics (TA = 25 unless otherwise noted) Symbol VF IR Notes: Conditions Maximum Instantaneous Forward Voltage per leg Maximum DC reverse current at rated DC blocking voltage per leg IFM =25A TA = 25 TA = 125 (1) Unit case mounted on Al plate heatsink (2) Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with M5 screw Document Number: GBPC5002H thru GBPC5010H Mar.02, 2016 www.smsemi.com 1 GBPC5002H thru GBPC5010H I F, AVERAGE FORWARD CURRENT (A) 100 Mounted on a 220x220x50 mm AL plate heatsink 80 60 40 20 Resistive or Inductive load 0 0 50 100 TC, CASE TEMPERATURE (C) Fig.1 Forward Current Derating Curve 500 100 10 1.0 0.1 Tj=25C Pulse Width=300s 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig.2 Typical Forward Characteristics (per element) 150 1000 Single Half-Sine Wave (JEDEC Method) 400 Cj, CAPACITANCE (pF) IFSM, PEAK FWD SURGE CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (A) Performance Curves 300 200 100 100 Tj=25C f =1MHZ Tj=150C 1 10 10 NUMBER OF CYCLES AT 60Hz Fig.3 Max Non-Repetitive Surge Current IR, INSTANTANEOUS REVERSE CURRENT (A) 0 100 0.1 1 10 100 VR, REVERSE VOLTAGE (V) Fig.4 Typical Junction Capacitance (per element) 10 Tj=125C 1.0 0.1 Tj=25C 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig.5 Typical Reverse Characteristics (per element) Document Number: GBPC5002H thru GBPC5010H Mar.02, 2016 www.smsemi.com 2 GBPC5002H thru GBPC5010H Package Outline Information 1.135(28.8) 1.115(28.3) CASE: GBPC-H 0.200(5.1) DIA. 0.185(4.7) 0.673(17.1) 0.633(16.1) ~ 1.135(28.8) 0.732(18.6) 1.115(28.3) 0.692(17.6) 0.673(17.1) 0.633(16.1) ~ 0.582(14.8) 0.542(13.8) 0.256(6.5) 0.240(6.1) 0.034(0.86) 0.030(0.76) 0.976(24.8) 0.839(21.3) 0.307(7.8) 0.236(6.0) Dimensions in (inches) mm Document Number: GBPC5002H thru GBPC5010H Mar.02, 2016 www.smsemi.com 3