- 586 -
.062(1.58)
.050(1.27)
.012(.31)
.006(.15)
.008(.20)
.004(.10)
.056(1.41)
.035(0.90)
.187(4.75)
.160(4.06)
.210(5.33)
.195(4.95)
.111(2.83)
.090(2.29)
.091(2.30)
.078(1.99)
EGF1A THRU EGF1M
1.0 AMP. Surface Mount Glass Passivated Junction High Efficient Rectifier
Voltage Range
50 to 1000 Volts
Current
1.0 Ampere
eatures
Ideal for surface mount automotive applications
Glass passivated cavity-free junction
Easy pick and place
Capable of meeting enviromental standard of
MIL-S-19500
Plastic material used carries Underwriters
Laboratory Classification 94V-O
Compete device submersible temperature of 265O
for 10 sec in solder bath.
echanical Data
Case: Molded pla s tic
Terminals: Solder plated
Polarity: Indicated by cathode band
Packaging: 12mm tape per EIA STD RS-481
Weight: 0.120 gram
SMA/DO-214AC
Dimen s io n s in inches a n d (millimeter s )
aximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number Symbol
EGF
1A
EGF
1B
EGF
1C
EGF
1D
EGF
1G
EGF
1J
EGF
1K
EGF
1M
Unit
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
150
200
400
600
800
1000
V
Maximum RMS Voltage VRMS
35
70
105
140
280
420
560
700
V
Maximum DC Blocking Voltage VDC 50
100
150
200
400
600
800
1000
V
Maximum Average Forward Rectified
Current @TL =125℃ I(AV) 1.0 A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
Load (JEDEC method ) IFSM 30 A
Maximum Instantaneous Forward Voltage
@ 1.0A VF 1.0 1.3
1.7 V
Maximum DC Reverse Current
@TA =25℃ at Rated DC Blocking Voltage
@ TA=125℃ IR 5
100 uA
uA
Maximum R e verse R e covery Tim e
(Note 1 ) Trr 50 75 nS
Typical Junction Capacitance ( Note 2 ) Cj 15 pF
Typical Thermal Resistance (Note 3)
R
θ
JA
R
θ
JL 85.0
30.0 ℃/W
Operating Temperature Range TJ -65 to +175 ℃
Storage Temperature Range TSTG
-65 to +175 ℃
Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1 MHz and Applied VR=4.0 Volts
3. Thermal Resistance from Junction to Ambient and from Junction to Lead P.C.B. Mounted on
0.2 x 0.2” (5.0 x 5.0mm) Copper Pad Areas.