SMD Power Inductor ASPI-0403 Pb RoHS 4.5 x 4.0 x 3.2mm Compliant APPLICATIONS: FEATURES: * OA equipments * PC and notebook * LCD TV set * Power supply * Suitable for RoHS reflow profile * High current rating and low DCR * Special lead wire design to prevent open circuit failure * Excellent terminal strength to mechanical stress ELECTRICAL SPECIFICATIONS: Abracon P/N: Operating Temperature: Storage Temperature: PART NUMBER ASPI-0403-1R0 ASPI-0403-1R4 ASPI-0403-1R8 ASPI-0403-2R2 ASPI-0403-2R7 ASPI-0403-3R3 ASPI-0403-3R9 ASPI-0403-4R7 ASPI-0403-5R6 ASPI-0403-6R8 ASPI-0403-8R2 ASPI-0403-100 ASPI-0403-120 ASPI-0403-150 ASPI-0403-180 ASPI-0403-220 ASPI-0403-270 ASPI-0403-330 ASPI-0403-390 ASPI-0403-470 ASPI-0403-560 ASPI-0403-680 ASPI-0403 Series -40C to +85C +5C to +40C INDUCTANCE (uH) 1.0 1.4 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 Tolerance M M M M M M M M M M M K K K K K K K K K K K DCR () max 0.0487 0.0562 0.0637 0.0712 0.0787 0.0862 0.0937 0.1087 0.1257 0.1312 0.1462 0.1820 0.2100 0.2350 0.3380 0.3780 0.5220 0.5400 0.5870 0.8440 0.9370 1.1170 IDC (A) max 2.56 2.52 1.95 1.75 1.58 1.44 1.33 1.15 0.99 0.95 0.84 1.04 0.97 0.85 0.74 0.68 0.62 0.56 0.52 0.44 0.42 0.37 Inductance Code 1R0 1R4 1R8 2R2 2R7 3R3 3R9 4R7 5R6 6R8 8R2 100 120 150 180 220 270 330 390 470 560 680 Test Conditions Inductance: Test Frequency is 7.96MHz (1.0H ~ 8.2H); 2.52MHz(10H ~ 68H) Isat: L/L (initial) -10% or T=40C (Ta=20C), whichever is lower. OPTIONS AND PART IDENTIFICATION ASPI-0403Inductance Code Please refer to the table above ABRACON IS ISO9001:2008 CE RTIFIED Tolerance % Packaging K: 10% M: 20% T: Tape and Reel (1.5kpcs / reel) Visit www.abracon.com for Terms & Conditions of Sale Revised: 03.08.12 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com SMD Power Inductor ASPI-0403 Pb RoHS Compliant 4.5 x 4.0 x 3.2mm OUTLINE DRAWING: Recommended Land Pattern A 4.50.3 B 4.00.3 C 3.20.30 D 1.80 E 1.50 F 4.50 Dimension: mm REFLOW PROFILE: Temperature( C) Item Tpeak t3 Heating time t1 Heating temperature 25 C Tsoak Time 25 C to peak ABRACON IS ISO9001:2008 CE RTIFIED mark Temperature rise gradient t3 3/sec (max) Tsoak 50s 150s 120180 Time over 217 t1 70 sec Time within 5 of actual peak temperature t3 1030 sec Peak temperature Tpeak 250 ( +0 / -5 ) Time 25 to peak Temperature 6 minutes max. Time (sec) t1 Visit www.abracon.com for Terms & Conditions of Sale Revised: 03.08.12 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com SMD Power Inductor ASPI-0403 Pb RoHS 4.5 x 4.0 x 3.2mm Compliant TAPE & REEL: T: 1,500pcs / reel CARRIER TAPE / SIZE (mm) REEL 13"x24mm A0 B0 K0 F E W P Po P2 t A B C D 4.2 0.1 4.8 0.1 3.3 0.1 5.5 0.1 1.75 0.1 12 0.3 8 0.1 4 0.1 2 0.1 0.4 0.05 12.5 0.5 100 0.5 13.2 0.3 330 1.0 Dimension: mm ATTENTION:Abracon Corporation's products are COTS - Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon's products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 03.08.12 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com