SUNON
MODEL NO ：SA000-13007
DESCRIPTION ：Thermal Module
DIMENSIONS ：43.5X43.3X10 mm
SUNON SPEC. NO. ：C01001450F-02
CUSTOMER
APPROVAL NO. ：
APPROVED BY
CUSTOMER
(AUTHORIZED) ：
DRAWN CHECKED APPROVED SPEC. NO C01001450F-02
ISSUED DATE 07. 29. 2013
EDITION 0
Qian
07/29 Amy
Cloud
REVISION DATE
建準電機工業股份有限公司
SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD.
No. 30, LN. 296, XINYA RD., QIANZHEN DIST
KAOHSIUNG CITY 80673, TAIWAN(R. O. C)
URL:http://www.SUNON.com
TEL:886-7-8135888
FAX:886-7-8230505/8230606/8231010
E-mail:
SUNON@email.SUNON.com.tw
SPECIFICATION FOR APPROVAL
SUNON
1. SPECIFICATIONS ------------------------------------- Page 2
2. DIMENSION ---------------------------------------------- Page 3~4
3. FAI & CPK TEST -------------------------------------- Page 5~7
4. NOTES ------------------------------------------------------ Page 8
5. Declaration of RoHS ------------------------------------- Page 9
PAGE 1 OF 9
SPEC. NO. C01001450F-02
ISSUED DATE 07. 29. 2013
EDITION 0
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LTD.
建準電機工業股份有限公司
REVISION DATE
CHECK LIST
SPECIFICATION FOR APPROVAL
2013.07.29
D.C.C.
SUNON
MODEL : SA000-13007
1. Application N/A
2. Heat Sink Dimension 43.5X43.3X10 HF
3. Heat Sink Material AL6063-T5 (洗白）
4. Cooling Method N/A
5. Thermal Grease / PAD BP410
6. Fan Dimension N/A
7. Fan Speed (with Heat Sink) N/A
8. Fan Airflow ( with Heat Sink ) N/A
9. Fan Rating Voltage N/A
10. Fan Rating Current ( with Heat Sink ) N/A
11. Fan Power Consumption
( with Heat Sink ) N/A
12. Fan Bearing Type N/A
13. Fan Connector N/A
14. Cooling Module Noise N/A
15. Fan Operating Voltage Range N/A
16. Operating Temperature -10 to+70 deg .C
17. Storage Temperature -40 to+70 deg .C
18. Weight 20.4 g
19. Life Expectance N/A
PAGE 2 OF 9
SPEC. NO. C01001450F-02
ISSUED DATE 07. 29. 2013
EDITION 0
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LTD.
建準電機工業股份有限公司
REVISION DATE
1.SPECIFICATIONS
2013.07.29
D.C.C.
SUNON
UNIT：mm
PAGE 3 OF 9
SPEC. NO. C01001450F-02
ISSUED DATE 07. 29. 2013
EDITION 0
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LTD.
建準電機工業股份有限公司
REVISION DATE
2.DIMENSION
2013.07.29
D.C.C.
SUNON
PAGE 4 OF 9
SPEC. NO. C01001450F-02
ISSUED DATE 07. 29. 2013
EDITION 0
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LTD.
建準電機工業股份有限公司
REVISION DATE
2.DIMENSION
2013.07.29
D.C.C.
SUNON
1.FAI TEST
PAGE 5 OF 9
SPEC. NO. C01001450F-02
ISSUED DATE 07. 29. 2013
EDITION 0
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LTD.
建準電機工業股份有限公司
REVISION DATE
3.FAI & CPK TEST
2013.07.29
D.C.C.
SUNON
2.CPK TEST
PAGE 6 OF 9
SPEC. NO. C01001450F-02
ISSUED DATE 07. 29. 2013
EDITION 0
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LTD.
建準電機工業股份有限公司
REVISION DATE
3.FAI & CPK TEST
2013.07.29
D.C.C.
SUNON
2.CPK TEST
PAGE 7 OF 9
SPEC. NO. C01001450F-02
ISSUED DATE 07. 29. 2013
EDITION 0
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LTD.
建準電機工業股份有限公司
REVISION DATE
3.FAI & CPK TEST
2013.07.29
D.C.C.
SUNON
Notes
I. SPECIFICATION MODIFICATION
1. SUNON offers engineering assistance on module installation and cooling
system design.
2. All changes, modifications and/or revisions to the specifications, if any, are
incorporated in the attached specifications.
3. No changes, modifications and/or revisions to these specifications are effective
absent agreement, by both SUNON and the customer, in writing.
4. This module will be shipped in accordance with the attached specification
unless SUNON and the customer have agreed otherwise, in writing, as
specified in Paragraph 3, above.
II. OTHER
1. DO NOT operate this module in proximity to hazardous materials such as
organic silicon, cyanogens, formalin, phenol, or corrosive gas environments
including, but not limited to, H2S, SO2, NO2, or Cl2.
2. Unless otherwise noted, all testing of this module is conducted at 25°C ambient
temperature and sixty-five percent (65%) relative humidity.
3. DO NOT store this module in an environment with high humidity. This
module must be stored in accordance with the attached specifications
regarding storage temperature. If this module is stored for more than 6
months, SUNON recommends functional testing before using.
4. SUNON reserves the right to use components from multiple sources at its
discretion. The use of components from other sources will not affect the
specifications as described herein.
III. WARRANTY
This module is warranted against all defects which are proved to be fault in
our workmanship and material for one year from the date of our delivery.
The sole responsibility under the warranty shall be limited to the repair of
the module or the replacement thereof, at SUNON’s sole discretion. SUNON
will not be responsible for the failures of its module due to improper
handing, misuse or the failure to follow specifications or instructions for use.
In the event of warranty claim, the customer shall immediately notify
SUNON for verification. SUNON will not be responsible for any
consequential damage to the customer’s equipment as a result of any module
proven to be defective.
PAGE 8 OF 9
SPEC. NO. C01001450F-02
ISSUED DATE 07. 29. 2013
EDITION 0
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LTD.
建準電機工業股份有限公司
REVISION DATE
2013.07.29
D.C.C.
SUNON
Control declaration of environment- related substances/ materials
1. In accordance with the Restriction of Hazardous Substances (RoHS) Directive
2011/65/EU and specific market requirements, SUNON Halogen-Free Product have
complied with law and discipline not to employ the forbidden substances, and restrict
the allowable concentration of some lim ited substances deliberately in our
components.
No Substance Criteria
1 CFCs & HCFCs (ozone depleting substances) Forbidden
2 Chlorinated Organic Solvent Forbidden
Plastic (Frame, Impeller, wire harness, etc.) <100ppm
Solder <1000ppm
Steel alloy <3500ppm
Aluminium alloy <4000ppm
3 Lead and its compounds
Copper alloy <4wt%
Solder <20ppm
Parts composed of metals containing zinc
(e.g. brass, zinc for die casting) <100ppm
4 Cadmium and its
compounds
Plastic <5ppm
5 PBBs and PBDEs Forbidden
6 PCB and PCT Forbidden
7 CP, Short-chain Chlorinated paraffins C10-13, Cl ≥48 wt% Forbidden
8 Mirex Forbidden
9 PCN Forbidden
10 Hexavalent Chromium compounds <100ppm
11 Mercury and its compounds Forbidden
12 Asbestos Forbidden
13 Organic Tin compounds Forbidden
14 Azo compounds Forbidden
15 TBBP-A in external case plastic parts of products (PCB is exempted) <1000ppm
16 Nickel in external case parts, which are likely to result in prolonged skin exposure <1000ppm
17 Hexabromocyclododecane (HBCDD) <1000ppm
18 Di-butyl Phthalate (DBP) <1000ppm
19 Benzyl butyl Phthalate (BBP) <1000ppm
20 Di-ethylhexyl Phthalate (DEHP) <1000ppm
21 Di-isobutyl Phthalate (DIBP) <1000ppm
22
Brominated/chlorinated flame retardants (other than PBBs or PBDEs),
applicatable item: frame, bobbin, impeller, lear wire, connector, mylar
insulator.
Br<900ppm
Cl<900ppm
Br+Cl<1500ppm
23 PAHs and its 16 compounds in unusual contact material BaP < 20ppm
Total <200ppm
24 PCB and electroplating material, PFOS content complianced with
2006/122/EC
PFOS <1000ppm;
coating material
PFOS < 1µg/m 2
PAGE 9 OF 9
SPEC. NO. C01001450F-02
ISSUED DATE 07. 29. 2013
EDITION 0
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LTD.
建準電機工業股份有限公司
REVISION DATE
Declaration of Restricted Materials
2013.07.29
D.C.C.
