03-Serie TP-A_03-Serie TP-A 31/10/14 09:12 Page6 TP series Tiny washable momentary pushbutton switches Distinctive features and specifications UG1410A Process sealed * Single piece case * O-ring seal between actuator and bushing * Epoxy sealed terminals Wide variety of contact materials Same PCB layout as TL, TR and TG tiny switches B2 MATERIALS ELECTRICAL SPECIFICATIONS * Max. current/voltage rating with resistive load : - gold plated contacts : 0,4VA 20V max. AC or DC - silver plated contacts : 0,5A 48V max. AC or DC * Minimum load : 10mA 50mV - 10A 5VDC * Contact resistance : 50 m max. * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 1.000 Vrms 50 Hz min. between terminals and frame 500 Vrms 50 Hz min. between terminals * Electrical life at full load : - gold plated contacts : 60.000 cycles - silver plated contacts : 20.000 cycles * Case : PBT * Actuator : polyamide, glass filled * Contacts and terminals : 0 : brass, gold plated 1 : brass, silver plated 3 : brass, gold plated (1,27 micron gold) 8 : contact brass, gold plated + tin plated terminals 9 : contact brass, gold plated (1,27 micron gold) + tin plated terminals * Terminal seal : epoxy GENERAL SPECIFICATIONS * Total travel : - function 2 : 1 mm (.039) - function 3 : 0,8 mm (.031) * Strength of terminals : pull-out force - 10N max. * Operating temperature : -30C to +85C * Moisture : 21 days 95 % (NFC 20-603 - IEC 68-2-3) * Cleaning : solvents or water + detergent * Wave soldering : 260C - 5 sec. The company reserves the right to change specifications without notice. B2-6 www.apem.com APEM 03-Serie TP-A_03-Serie TP-A 04/11/14 14:33 Page7 TP series Tiny washable momentary pushbutton switches Overview TP SERIES Number of poles 3 4 Single pole Double pole Electrical functions 2 3 ON OFF - Terminals MOM MOM P0 Y0 W0 WW MW Straight PC Bracket mounting Right angle, horizontal mounting Right angle, vertical mounting Wire-wrap B2 Contacts and terminal materials 0 1 3 8 9 Brass, gold plated Brass, silver plated Brass, gold plated (1,27 micron gold) Contact brass, gold plated + tin plated terminals Contact brass, gold plated (1,27 micron gold) + tin plated terminals (SP only) Plungers * Short - standard * Long * Flush Codes : see "Options" pages. Special options 00 07 08 18 20 25 30 40 50 No special requirement Trimmed terminals 3,2 (.125) Extended terminals Switch without ground plate Ground plate with 2 pins Trimmed terminals 5 (.196) Wire-wrap on bracket mounting models With protection cap U3500 Crimped ground plate pins Caps For long plunger 30 O 6,5 (.255) (P/N U4310) 40 O 5 (.196) (P/N U4320) ABOUT THIS SERIES On the following pages, you will find successively : - model structure of switches - options in the same order as in above chart Dimensions : first dimensions are in mm while inches are shown as bracketed numbers. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. Packaging unit : 100 pieces, except for models with WW terminals (50 pieces). APEM www.apem.com B2-7 03-Serie TP-A_03-Serie TP-A 31/10/14 09:12 Page8 TP series Tiny washable momentary pushbutton switches * Straight PC, right angle or wire-wrap terminals * 1 and 2 pole configurations Fonction 3 (NO) (OFF - MOM) 0.70 (.027) 0.70 (.027) MODEL STRUCTURE Shown in function 2, with standard plunger 3.55 (.139) O2.50 (.098 DIA) O4.60 (.181 DIA) 4.20 (.165) ON MOM TP33P0 TP43P0 OFF MOM 1.00 (.039) TP42P0 6.10 (.240) TP32P0 3.30 (.129) Double pole 8.10 (.318) O5.00 (.196 DIA) Single pole 2.54 1 2 3 (.100) 4 5 6 0.70 (.027) 8.10 (.318) 5.00 (.196) O1.10 (.043 DIA) 3.80 (.149) 1 2.54 (.100) O1.10 (.043 DIA) 4 0.50 (.019) 5.08 (.200) 9.10 (.358) 5.08 (.200) Straight PC terminals : TP..P0 2.54 (.100) Function 3 has two terminals only (3 and 1) per pole 3.55 (.139) O4.60 (.181 DIA) Double pole TP42Y0 ON MOM TP33Y0 TP43Y0 OFF MOM 5.70 (.224) TP32Y0 0.70 (.027) 5.00 (.196) 0.40 (.015) 1 2 3 4 5 6 10.16 (.400) 0.50 (.019) 10.16 (.400) 2.54 (.100) 4.20 (.165) 1.00 (.039) O5.00 (.196 DIA) 8.60 (.338) Single pole O2.50 (.098 DIA) O1.10 (.043 DIA) 3.80 (.149) 1 O1.10 (.043 DIA) 4 0.70 (.027) 10.16 (.400) 5.08 (.200) Straight terminals - bracket mounting : TP..Y0 3.30 (.129) 9.10 (.358) 2.54 (.100) Function 3 has two terminals only (3 and 1) per pole TP42W0 ON MOM TP33W0 TP43W0 OFF MOM 3.30 (.129) 5.55 (.218) 0.50 (.019) 3 2 1 6 5 4 8.10 (.318) 5.08 (.200) 2.54 (.100) 3 6 2.54 (.100) 9.60 (.377) 5.08 (.200) 2.54 (.100) TP32W0 o5.00 (.196 DIA) 5.08 (.200) Double pole 9.20 (.362) Single pole o1.10 (.043 DIA) 5.08 (.200) o4.60 (.181 DIA) 4.20 (.165) 3.80 (.149) 3.50 (.137) o2.50 (.098 DIA) 0.70 (.027) Right angle terminals - horizontal mounting : TP..W0 3.55 (.139) B2 3 15.20 (.598) Fonction 2 (ON - MOM) 1 3.30 (.129) 3 2 1 3.30 (.129) 2.54 (.100) o1.10 (.043 DIA) Function 3 has two terminals only (3 and 1) per pole B2-8 www.apem.com APEM 03-Serie TP-A_03-Serie TP-A 31/10/14 09:12 Page9 TP series Tiny washable momentary pushbutton switches Shown in function 2, with standard plunger ON MOM TP33WW TP43WW OFF MOM 3.30 (.129) 0.70 (.027) 8.65 (.340) 5.00 (.196) 3 6 2.54 (.100) 5.08 (.200) 6 1 4 2 5 5.08 (.200) 3 5.08 (.200) 5.08 (.200) 9.10 (.358) 5.08 (.200) 5.08 (.200) TP42WW O1.10 (.043 DIA) 5.08 (.200) TP32WW 0.50 (.019) Double pole 2.54 (.100) O5.00 (.196 DIA) 4.20 (.165) Single pole 3.80 (.149) 3.55 (.139) O4.60 (.181 DIA) 9.20 (.362) O2.50 (.098 DIA) 3.50 (.137) Right angle terminals - vertical mounting : TP..WW O1.10 (.043 DIA) Function 3 has two terminals only (3 and 1) per pole 3.55 (.139) O2.50 (.098 DIA) O4.60 (.181 DIA) TP32MW TP42MW ON MOM TP33MW TP43MW OFF MOM 5.00 (.196) 0.70 (.027) 8.10 (.318) 2.54 (.100) 1 2 3 4 5 6 O1.10 (.043 DIA) 4.20 (.165) 1.00 (.039) Double pole 15.20 (.598) Single pole 6.10 (.240) O5.00 (.196 DIA) 3.80 (.149) 1 4 9.10 (.358) 0.50 (.019) 2.54 (.100) O1.10 (.043 DIA) 5.08 (.200) 5.08 (.200) Wire-wrap terminals : TP..MW 2.54 (.100) Function 3 has two terminals only (3 and 1) per pole 8.65 (.340) 4.60 (.181) 9.60 (.377) 5.00 (.196) 5.55 (.218) 3.05 (.120) 14.30 (.562) 14.20 (.559) PCB MOUNTING CAP FOR PCB PROCESSING 17.45 (.687) Provide additional protection during PCB processing. Supplied separately. For cap mounted on the switch, see special option 40. Material : vinyl U3502 APEM O3.96 (.155 DIA) www.apem.com B2-9 B2 03-Serie TP-A_03-Serie TP-A 31/10/14 09:12 Page10 TP series Tiny washable momentary pushbutton switches CONTACT AND TERMINAL MATERIALS Brass, gold plated Brass, silver plated Brass, gold plated (1,27 micron gold) Contact brass, gold plated + tin plated terminals Contact brass, gold plated (1,27 micron gold) + tin plated terminals (single pole only) 0 1 3 8 9 PLUNGERS 4.20 (.165) O4.60 (.181 DIA) O5.00 (.196 DIA) Short - standard With blue case 30 3.80 (.149) 4.20 (.165) O4.60 (.181 DIA) O5.00 (.196 DIA) Long With black case 80 With blue case 35 3.80 (.149) 4.20 (.165) O4.60 (.181 DIA) 6.10 (.240) 3.80 (.149) O2.50 (.098 DIA) 6.10 (.240) 3.55 (.139) O2.50 (.098 DIA) 4.50 (.177) Standard plunger colour is black. 6.10 (.240) B2 O5.00 (.196 DIA) Flush With black case 85 With black case 82 SPECIAL OPTIONS 00 No special requirement 3.20 (.125) 07 Trimmed terminals - length 3,2 mm (.125) for TP..WW models only 12.50 (.492) 07 08 Extended terminals for TP..W0 models only 08 B2-10 www.apem.com APEM 03-Serie TP-A_03-Serie TP-A 31/10/14 09:12 Page11 TP series Tiny washable momentary pushbutton switches SPECIAL OPTIONS 18 (continued) Switch without ground plate for TP..WW models only 2.70 (.106) 20 Ground plate with 2 pins for TP..WW models only 25 Trimmed terminals - length 5 mm (.196) for all models, except TP..WW 10.16 (.400) 18 5.00 (.196) 20 B2 Wire-wrap terminals on models with mounting bracket 40 With cap U3500 mounted over plunger and bushing Further protects the switch during PCB processing 50 Crimping of ground plate pins. Retains switch on PC during handling and wave soldering. For models TP..W0, TP..WW and TP..Y0 single and double pole. 25 15.20 (.598) 30 30 40 50 CAPS Blank Without cap Cap colours O5.00 (.196 DIA) 30 P/N U4310 - for long plunger only 3.00 (.118) 3.00 (.118) 4.00 (.157) 3.90 (.153) O6.50 (.255) 40 P/N U4320 - for long plunger only To order caps separately, use their part number (U...). APEM www.apem.com Replace "0" by number 1 1/4 2 3 4 5 6 7 7/1 9 blue dark blue black green grey yellow red ivory white orange B2-11 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Apem: TP33W003050 TP32P008000 TP32P00850042 TP32W003000 TP32W003500 TP32W003550 TP32W008000 TP32W008200 TP32WW03300 TP32WW08000 TP32WW08500 TP33P008000 TP33P008500 TP33P018000 TP33W00850036 TP33W013000 TP33W083025 TP33W088000 TP33WW08000 TP33WW08050 TP33WW0850036 TP33Y003000 TP42P008000 TP42W008000 TP42WW08000 TP32MW03000 TP32MW08000 TP32P003000 TP32W003050 TP32WS83500 TP32WS83565 TP32WW03050 TP32Y003050 TP33MW03000 TP33P003000 TP33P003500 TP33W003000 TP33W008000 TP33W008250 TP33WS83500 TP33WS83565 TP33WW03000 TP33WW03050 TP33Y003050 TP33Y008000 TP42MW03000 TP42P003000 TP42W003050 TP42WW03050 TP42Y003050 TP43P003000 TP43W003050 TP43WW03050 TP43WW03550 TP43Y003050 TP33W018000