This product complies with the RoHS Directive (EU 2002/95/EC). DMC506E2 Silicon NPN epitaxial planar type For high-frequency amplification DMC206E2 in SMini6 type package Features Package High transition frequency fT Contributes to miniaturization of sets, reduction of component count. Eco-friendly Halogen-free package Code SMini6-F3-B Basic Part Number Pin Name 1: Emitter (Tr1) 2: Emitter (Tr2) 3: Base (Tr2) Package dimension clicks here. Dual DSC2G02 (Individual) Packaging DMC506E20R Embossed type (Thermo-compression sealing): 3000 pcs / reel (standard) Absolute Maximum Ratings Ta = 25C Parameter Symbol Rating Unit Collector-base voltage (Emitter open) VCBO 30 V Collector-emitter voltage (Base open) VCEO 20 V Emitter-base voltage (Collector open) VEBO 3 V Collector current IC 15 mA Total power dissipation PT 150 mW Junction temperature Tj 150 C Storage temperature Tstg -55 to +150 C Click! 4: Collector (Tr2) 5: Base (Tr1) 6: Collector (Tr1) Marking Symbol: D2 Internal Connection (C1) 6 (B1) 5 (C2) 4 Tr2 Tr1 1 (E1) 2 (E2) 3 (B2) Electrical Characteristics Ta = 25C3C Parameter Symbol Conditions Min Typ Max Unit Collector-base voltage (Emitter open) VCBO IC = 10 A, IE = 0 30 V Collector-emitter voltage (Base open) VEBO IE = 10 A, IC = 0 3 V Base-emitter voltage VBE VCE = 6 V, IC = 1 mA Forward current transfer ratio hFE VCE = 6 V, IC = 1 mA 65 Transition frequency fT VCE = 6 V, IC = 1 mA 450 Reverse transfer capacitance(Common emitter) Cre Power gain Noise figure 0.72 V 260 650 MHz VCE = 6 V, IC = 1 mA, f = 10.7 MHz 0.6 pF PG VCE = 6 V, IC = 1 mA, f = 100 MHz 24 dB NF VCE = 6 V, IC = 1 mA, f = 100 MHz 3.3 dB Note) Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors. Publication date: February 2012 Ver. CED 1 This product complies with the RoHS Directive (EU 2002/95/EC). DMC506E2 DMC506E2_IC-VCE DMC506E2_PT-Ta PT Ta 200 300 50 40 80 120 160 90 A 80 A 60 A 50 A 40 A 4 0 200 70 A 8 Ambient temperature Ta (C) 30 A 0 4 Ta = 85C 10-1 -30C 102 VCE = 6 V 25C 16 Ta = 85C -30C 12 8 4 0 0 0.2 0.4 0.6 DMC506E2_fT-IC fT IC Transition frequency fT (MHz) VCE = 6 V Ta = 25C 1 200 800 400 1 10 0.8 102 Collector current IC (mA) Ver. CED 1 10 102 Collector current IC (mA) Cob VCB 1.0 Base-emitter voltage VBE (V) Collector current IC (mA) 0 10-1 50 DMC506E2_Cob-VCB 25C 1 600 -30C 0 10-1 12 20 Collector current IC (mA) 1 10 25C 100 IC VBE IC / IB = 10 1 Ta = 85C 150 DMC506E2_IC-VBE VCE(sat) IC 10-2 10-1 200 Collector-emitter voltage VCE (V) DMC506E2_VCEsat-IC 10 8 250 1.2 Collector output capacitance (Common base, input open circuited) Cob (pF) 0 100 A 12 Forward current transfer ratio hFE Collector current IC (mA) Total power dissipation PT (mW) 100 VCE = 6 V IB = 120 A 110 A 150 0 Collector-emitter saturation voltage VCE(sat) (V) hFE IC 16 Ta = 25C 2 DMC506E2_hFE-IC IC VCE 2.0 IE = 0 f = 1 MHz Ta = 25C 1.6 1.2 0.8 0.4 0 1 10 102 Collector-base voltage VCB (V) Request for your special attention and precautions in using the technical information and semiconductors described in this book (1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) The technical information described in this book is intended only to show the main characteristics and application circuit examples of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) The products described in this book are intended to be used for general applications (such as office equipment, communications equipment, measuring instruments and household appliances), or for specific applications as expressly stated in this book. Consult our sales staff in advance for information on the following applications: - Special applications (such as for airplanes, aerospace, automotive equipment, traffic signaling equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. It is to be understood that our company shall not be held responsible for any damage incurred as a result of or in connection with your using the products described in this book for any special application, unless our company agrees to your using the products in this book for any special application. (4) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company. 20100202