Specification Control Drawing R Identification, colors & marks B Cross section A 9/0-9 -1-Black A 9/0-9 -3-Green EPD52957A 6 conductor cable Issue F - 11/28/2011 B A 9/0-9 -2-White B Components ID Quantity A B 3 3 Part number 44A1121-22 FIL-40-0.060 Description Twisted pair, shielded, jacketed Solid Thermorad Filler 0.060 OD Cable Outer Core Description Wrap Shield Wrap Shield Jacket Thickness Inches mm Polyester tape .001" Round tinned copper 34 awg optimized Polyester tape .003" Round tinned copper 34 awg optimized FDR-25 black 0.002 0.013 0.006 0.013 0.041 0.05 0.33 0.15 0.33 1.05 Cable OD tolerance Specification Raychem WCD 3304 Weight 136.36 lb/kft OD Inches 0.270 0.274 0.300 0.312 0.338 0.421 mm 6.86 6.97 7.63 7.93 8.59 10.68 + 0.021 + 0.53 203.30 Kg/Km OBSOLETE Page 1 of 2 Tyco Electronics Corporation Raychem Wire and Cable 501 Oakside Avenue Redwood City, CA 94063-3800 1-800-227-8816 (c) 2006-2011 Tyco Electronics Corporation. All rights reserved. NOT the LATEST REVISION This specification sheet takes precedence over documents referenced herein. Referenced documents shall be of the issue in effect on date of invitation to bid. Proposed specification control drawings may be altered prior to final issue. RCD Version 1.2 Level 1 Ser #5 RWC 8/7/95 R Specification Control Drawing EPD52957A 6 conductor cable Issue F - 11/28/2011 Continued Physical properties Component Sequence Shield AWG Shield Wrap(Between Shields) The placing of the components in the cross sectional view of the cable is for reference only and is not a requirement Shield AWG is nominal to allow for changes to meet the surface transfer impedance. Shield design shall be tinel lock compatible. 40% (nominal) overlap Electrical properties Optimized shield Maximum surface transfer impedance of 5 milli ohms / meter at 30 Mhz. Notes Colors Dimensions Export License Note Identification, Colors & Marks Minimum length Part Number Note Specification Information Trademarks Nesting Marking Jacket identification Color code designators shall be in accordance with MIL-STD-681. Dimensions are in inches, and unless otherwise designated, are nominal. The information contained on this drawing may be subject to International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR) controls and may not be disclosed to any foreign person or firm, including foreign persons employed by or associated with your firm, without first complying with all requirements for obtaining an export license if applicable. The following is the key to the descriptions in the left hand view of the cable on Page 1. Line 1: Identifies the component per the components' ID list. Line 2: Color codes. Line 3: Mark on component "-" mark on component jacket. Cable will be supplied in 50 ft. minimum lengths unless otherwise specified. Other codes and suffixes may be added to the Part Number as necessary, to capture any additional requirements imposed by the purchase order This drawing is the property of Tyco Electronics Corporation and may not be used for any purpose other than for that which it is supplied without the express written authority of Tyco Electronics Corporation. Raychem, Thermorad , TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Some components are nested. Their size on the drawing may be altered to reflect the effect of nesting. Jacket marked at 4 inch (nom) intevals between the marks. Mark: 3EBPBBF 22-RAYCHEM-06090-Year of Manufacture. Page 2 of 2 Tyco Electronics Corporation Raychem Wire and Cable 501 Oakside Avenue Redwood City, CA 94063-3800 1-800-227-8816 This specification sheet takes precedence over documents referenced herein. Referenced documents shall be of the issue in effect on date of invitation to bid. Proposed specification control drawings may be altered prior to final issue. RCD Version 1.2 Level 1 Ser #5 RWC 8/7/95