© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3038_PHE448 • 4/4/2013 1
One world. One KEMET
Benets
• Rated voltage: 1,600 – 2,000 VDC
• Rated voltage: 650 – 700 VAC
• Capacitance range: 0.0001 – 0.022 µF
• Lead spacing: 15 mm
• Capacitance tolerance: ±5%, other tolerances on request
• Climatic category: 55/105/56, IEC 60068–1
• Tape and reel packaging in accordance with IEC 60286–2
• RoHS Compliant and lead-free terminations
• Category temperature range of -55˚C to +105˚C
Overview
The PHE448 Series is a capacitor with polypropylene lm
dielectric and metal foil electrodes, encapsulated in self-
extinguishing resin in a box of material meeting the requirements
of UL 94 V–0.
Applications
Typical applications include high frequency and high voltage
applications requiring capacitors with extremely high current
handling capability, i.e., high dV/dt values.
General Purpose, Pulse and DC Transient Suppression
PHE448 Series Polypropylene Film/Foil, Radial
Legacy Part Number System
PHE448 RB4150 JR06
Series Rated Voltage (VDC) Lead Spacing (mm) Capacitance Code (pF) Capacitance
Tolerance Lead and
Packaging Code
Polypropylene Film/Foil R = 1,600
S = 2,000
B = 15.0 Digits 2 – 4 indicate the rst three
digits of the cap value.
First digit indicates the total number
of digits in the cap value.
J = ±5%
Other tolerances on
request
See Ordering
Options Table
New KEMET Part Number System
F448 B D 152 J1K6 C
Capacitor
Class Series Lead Spacing (mm) Size Code Capacitance Code (pF) Capacitance
Tolerance Rated Voltage
(VDC)
Lead and
Packaging Code
F = Film Polypropylene
Film/Foil
B = 15.0 See Dimension
Table
First two digits indicate the
two most signicant digits
of the capacitance value in
picofarads. The third digit
is the number of following
zeros.
J = ±5%,
Other tolerances
on request
1K6 = 1,600
2K0 = 2,000
See Ordering
Options Table
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3038_PHE448 • 4/4/2013 2
Film Capacitors
General Purpose, Pulse and DC Transient Suppression – PHE448 Series Polypropylene Film/Foil, Radial
Ordering Options Table
Lead
Spacing
Nominal
(mm)
Type of Leads and Packaging Lead Length
(mm)
KEMET
Lead and
Packaging
Code
Legacy
Lead and
Packaging
Code
15
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads 6 +0/-1 CR06
Bulk (Bag) – Long Leads 17 +0/-1 A R17
Other Lead and Packaging Options
Bulk (Bag) – Max Length Leads 30 +5/-0 ALW0L R30
Tape & Reel (Standard Reel) H
0
= 18.5 +/-0.5 L R17T0
Tape & Reel (Large Reel) H
0
= 18.5 +/-0.5 P R17T1
Native 15
formed to 7.5
Ammo Pack H0= 16.5 +/-0.5 XLAF1 R25XA
Tape & Reel (Standard Reel) H0= 16.5 +/-0.5 XLTF1 R25X2
Dimensions – Millimeters
B
L
H
LL
d
p
0.5
KEMET Size
Code Legacy Size
Code p B H L d
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
BD B04 15 +/-0.4 5.5 Maximum 10.5 Maximum 18 Maximum 0.8 +/-0.05
BL B06 15 +/-0.4 7.5 Maximum 14.5 Maximum 18 Maximum 0.8 +/-0.05
BJ B10 15 +/-0.4 6.5 Maximum 12.5 Maximum 18 Maximum 0.8 +/-0.05
BQ B11 15 +/-0.4 8.5 Maximum 16 Maximum 18 Maximum 0.8 +/-0.05
BV B14 15 +/-0.4 9.5 Maximum 17.5 Maximum 18 Maximum 0.8 +/-0.05
BY B16 15 +/-0.4 11 Maximum 19 Maximum 18 Maximum 0.8 +/-0.05
Note: See Ordering Options Table for lead length (LL) options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3038_PHE448 • 4/4/2013 3
Film Capacitors
General Purpose, Pulse and DC Transient Suppression – PHE448 Series Polypropylene Film/Foil, Radial
Performance Characteristics
Voltage Range (VDC) 1,600 2,000
Voltage Range (VAC) 650 700
Capacitance Range (µF) 0.0015 – 0.022 0.0001 – 0.0033
Capacitance Values In accordance with IEC E12 series
Capacitance Tolerance ±5%, other tolerances on request
Category Temperature Range -55°C to +105°C
Rated Temperature +85°C
Voltage Derating The rated voltage is decreased with 1.3%/°C between +85°C and +105°C
Climatic Category IEC 60068–1, 55/105/56
Dissipation Factor tanδ
Maximum Values at +23°C
1 kHz 0.0003
10 kHz 0.0005
100 kHz 0.001
Insulation Resistance
Measured at +23°C, 100 VDC 60 seconds for VR < 500 VDC and at 500 VDC
for VR ≥ 500 VDC
Minimum Values Between Terminals
≥ 100,000 MΩ
Minimum Values Between Terminals and Case
≥ 100,000 MΩ
Derating of Vrms vs. Frequency, +85ºC Ambient Temperature and 10ºC Internal Heating, Typical Values
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3038_PHE448 • 4/4/2013 4
Film Capacitors
General Purpose, Pulse and DC Transient Suppression – PHE448 Series Polypropylene Film/Foil, Radial
Environmental Test Data
Test IEC Publication Procedure Requirements
Voltage Proof
60384–1 Clause 4.6 1.6 x VR after 60 seconds
breakdowns or ashovers and without decreased
insulation resistance below the value in each detail
Clause 4.6 2.3
2 x V
R
(minimum 400 VDC to case) after 60
seconds
As above
Vibration 60068–2–6 Test Fc
6 hours with 10 – 500 Hz and 0.75 mm
amplitude or 98 m/s2 depending on
frequency
tanδ ≤ 1.2 x stated value at 100 kHz
Bump 60068–2–29 Test Eb 4,000 bumps with 390 m/s2 mounted on
PCB
Δ C/C ≤ ±0.5%
tanδ ≤ 1.2 x stated value at 100 kHz
Insulation resistance:
≥ 100,000 MΩ for CR ≤ 0.33 µF
≥ 30,000 MΩ • µF for C
> 0.33 µF
Resistance to
Soldering Heat
60068–2–20
Method 1A Solder bath at + 260°C ±5°C with screening
be completed in a time not exceeding 1 second and the
terminations shall remain immersed to the specied
depth for 10 + 1 second and then be withdrawn.
∆ C/C ≤ ±1.0%
tanδ increase < 0.001
Climatic Sequence 60384–1
Paragraph 4:21
60068–2.2 dry heat 16 hours
60068–2–34 damp heat, one cycle
60068–2–1 Test Aa 2 hours
≥ 100,000 MΩ for CR ≤ 0.33 µF
≥ 30,000 MΩ • µF for CR > 0.33 µF
Δ C/C ≤ ±0.5%
Damp Heat
Steady State 60068–2–3 Test Ca +40°C and 90 – 95% RH
Insulation resistance:
≥ 50,000 MΩ for CR ≤ 0.33 µF
≥ 15,000 MΩ • µF for CR > 0.33 µF
Δ C/C ≤ ±1%
Endurance, AC 1,000 hours at +85°C and 1.25 x VR AC
No visible damage
Δ C/C ≤ ±3%
tanδ ≤ 1.5 x stated value at 100 kHz
Insulation resistance:
≥ 100,000 MΩ for CR ≤ 0.33 µF
≥ 30,000 MΩ • µF for CR > 0.33 µF
Charge and Discharge 60384–17
Paragraph 4.13
10,000 pulses and with (2 x) dV/dt according
to detail specication
tanδ (100 kHz) ≤ 2 x stated value (100 kHz)
Δ C/C ≤ ±0.5%
Insulation resistance:
≥ 50,000 MΩ for CR ≤ 0.33 µF
≥ 15,000 MΩ • µF for C
> 0.33 µF
Environmental Compliance
All KEMET pulse capacitors are RoHS Compliant.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3038_PHE448 • 4/4/2013 5
Film Capacitors
General Purpose, Pulse and DC Transient Suppression – PHE448 Series Polypropylene Film/Foil, Radial
Table 1 – Ratings & Part Number Reference
VDC VAC
Cap
Value
(µF)
Dimensions in mm Lead
Spacing
(p)
dV/dt
(V/µs)
Size Code
(New/Legacy)
Rthha ºC/W
85ºC
0.2m/s
New KEMET
Part Number
Legacy Part
Number
B H L
1600 650 0.0015 5.5 10.5 18.0 15 15000 BD/B04 87 F448BD152J1K6(1) PHE448RB4150J(1)
1600 650 0.0018 5.5 10.5 18.0 15 15000 BD/B04 86 F448BD182J1K6(1) PHE448RB4180J(1)
1600 650 0.0022 5.5 10.5 18.0 15 15000 BD/B04 84 F448BD222J1K6(1) PHE448RB4220J(1)
1600 650 0.0027 6.5 12.5 18.0 15 15000 BJ/B10 82 F448BJ272J1K6(1) PHE448RB4270J(1)
1600 650 0.0033 6.5 12.5 18.0 15 15000 BJ/B10 82 F448BJ332J1K6(1) PHE448RB4330J(1)
1600 650 0.0039 6.5 12.5 18.0 15 15000 BJ/B10 82 F448BJ392J1K6(1) PHE448RB4390J(1)
1600 650 0.0047 6.5 12.5 18.0 15 15000 BJ/B10 82 F448BJ472J1K6(1) PHE448RB4470J(1)
1600 650 0.0056 7.5 14.5 18.0 15 15000 BL/B06 78 F448BL562J1K6(1) PHE448RB4560J(1)
1600 650 0.0068 7.5 14.5 18.0 15 15000 BL/B06 78 F448BL682J1K6(1) PHE448RB4680J(1)
1600 650 0.0082 8.5 16.0 18.0 15 15000 BQ/B11 70 F448BQ822J1K6(1) PHE448RB4820J(1)
1600 650 0.01 8.5 16.0 18.0 15 15000 BQ/B11 70 F448BQ103J1K6(1) PHE448RB5100J(1)
1600 650 0.012 9.5 17.5 18.0 15 15000 BV/B14 60 F448BV123J1K6(1) PHE448RB5120J(1)
1600 650 0.015 9.5 17.5 18.0 15 15000 BV/B14 60 F448BV153J1K6(1) PHE448RB5150J(1)
1600 650 0.018 11.0 19.0 18.0 15 15000 BY/B16 55 F448BY183J1K6(1) PHE448RB5180J(1)
1600 650 0.022 11.0 19.0 18.0 15 15000 BY/B16 55 F448BY223K1K6(2) PHE448RB5220K(2)
2000 700 0.0001 5.5 10.5 18.0 15 25000 BD/B04 87 F448BD101J2K0(1) PHE448SB3100J(1)
2000 700 0.00012 5.5 10.5 18.0 15 25000 BD/B04 87 F448BD121J2K0(1) PHE448SB3120J(1)
2000 700 0.00015 5.5 10.5 18.0 15 25000 BD/B04 87 F448BD151J2K0(1) PHE448SB3150J(1)
2000 700 0.00018 5.5 10.5 18.0 15 25000 BD/B04 87 F448BD181J2K0(1) PHE448SB3180J(1)
2000 700 0.00022 5.5 10.5 18.0 15 25000 BD/B04 87 F448BD221J2K0(1) PHE448SB3220J(1)
2000 700 0.00027 5.5 10.5 18.0 15 25000 BD/B04 87 F448BD271J2K0(1) PHE448SB3270J(1)
2000 700 0.00033 5.5 10.5 18.0 15 25000 BD/B04 86 F448BD331J2K0(1) PHE448SB3330J(1)
2000 700 0.00039 5.5 10.5 18.0 15 25000 BD/B04 86 F448BD391J2K0(1) PHE448SB3390J(1)
2000 700 0.00047 5.5 10.5 18.0 15 25000 BD/B04 86 F448BD471J2K0(1) PHE448SB3470J(1)
2000 700 0.00056 5.5 10.5 18.0 15 25000 BD/B04 85 F448BD561J2K0(1) PHE448SB3560J(1)
2000 700 0.00068 5.5 10.5 18.0 15 25000 BD/B04 85 F448BD681J2K0(1) PHE448SB3680J(1)
2000 700 0.00082 5.5 10.5 18.0 15 25000 BD/B04 85 F448BD821J2K0(1) PHE448SB3820J(1)
2000 700 0.001 5.5 10.5 18.0 15 25000 BD/B04 84 F448BD102J2K0(1) PHE448SB4100J(1)
2000 700 0.0012 6.5 12.5 18.0 15 25000 BJ/B10 82 F448BJ122J2K0(1) PHE448SB4120J(1)
2000 700 0.0015 6.5 12.5 18.0 15 25000 BJ/B10 82 F448BJ152J2K0(1) PHE448SB4150J(1)
2000 700 0.0018 7.5 14.5 18.0 15 25000 BL/B06 78 F448BL182J2K0(1) PHE448SB4180J(1)
2000 700 0.0022 8.5 16.0 18.0 15 25000 BQ/B11 70 F448BQ222J2K0(1) PHE448SB4220J(1)
2000 700 0.0027 8.5 16.0 18.0 15 25000 BQ/B11 70 F448BQ272J2K0(1) PHE448SB4270J(1)
2000 700 0.0033 9.5 17.5 18.0 15 25000 BV/B14 60 F448BV332J2K0(1) PHE448SB4330J(1)
VDC VAC Cap Value
(µF) B
(mm) H
(mm) L
(mm) Lead
Spacing (p)
dV/dt (V/
µs) Size Code
(New/Legacy)
Rthha ºC/W 85ºC
0.2m/s
New KEMET
Part Number
Legacy Part
Number
(1) Insert lead and packaging code. See Order Options Table for available options.
(2) K = ±10% (only available tolerance).
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3038_PHE448 • 4/4/2013 6
Film Capacitors
General Purpose, Pulse and DC Transient Suppression – PHE448 Series Polypropylene Film/Foil, Radial
Soldering Process
The implementation of the RoHS Directive has required the selection
SnAuCu (SAC) alloys or SnCu alloys as primary solder. This has
increased the liquidus temperature from that of 183ºC for SnPb
eutectic alloy to 217ºC – 221ºC for the new alloys. As a result, the
heat stress to components, even in wave soldering, has increased
considerably due to higher pre-heat and wave temperatures.
Polypropylene capacitors are especially sensitive to heat (melting
point of polypropylene is 160ºC – 170ºC). Wave soldering can
be destructive especially for mechanically small polypropylene
capacitors and great care must be taken during soldering. The solder
proles from KEMET are highly recommended. You may also refer
to the wave soldering curve from IEC Publication 61760–1 Edition 2.
Please consult KEMET with any questions.
Marking
• KEMET’s logo
• Series
• Capacitance
• Capacitance tolerance
• Rated DC voltage
• Manufacturing date code
Packaging Quantities
KEMET
Size
Code
Legacy
Size
Code
Lead
Spacing Thickness
(mm)
Height
(mm)
Length
(mm)
Bulk
Short
Leads
Bulk
Long
Leads
Standard
Reel
ø 360 mm
Large Reel
ø 500 mm
Standard
Reel
Formed
Ammo
Formed
BD
B04
15
5.5
10.5
18
1000
800
600
1200
550
570
BE B05 5.5 12.5 18 1000 800 600 1200 550 570
BL B06 7.5 14.5 18 800 400 400 800 350 378
BJ B10 6.5 12.5 18 1000 600 500 1000 450 480
BQ B11 8.5 16 18 600 400 400 800 350 324
BM B12 815 18 600 400 400 800 350 351
BV B14 9.5 17.5 18 500 300 350 700 250 297
BG B15 612 18 1000 800 500 1000 450 520
BY B16 11 19 18 450 250 300 600 250 252
BU B17 13 12.5 18 400 300 250 500 200 216
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3038_PHE448 • 4/4/2013 7
Film Capacitors
General Purpose, Pulse and DC Transient Suppression – PHE448 Series Polypropylene Film/Foil, Radial
Lead Taping & Packaging (IEC 60286–2)
Taping Speci cation
Dimensions in mm Standard IEC
60286–2
Lead spacing +6/-0.1 F 5 7.5 Formed 7.5 10 15 22.5 27.5 F
Carrier tape width +/-0.5 W 18 18 18 18 18 18 18 18+1/-0.5
Hold-down tape width +/-0.3 W
0
9 9 9 12 12 12 12
Position of sprocket hole +/-0.5 W19 9 9 9 9 9 9 9+0.75/-0.5
Distance between tapes Maximum W23 3 3 3 3 3 3 3
Sprocket hole diameter +/-0.2 D04 4 4 4 4 4 4 4
Feed hole lead spacing +/-0.3 P0
(1) 12.7 12.7 12.7(4) 12.7 12.7 12.7 12.7 12.7
Distance lead – feed hole +/-0.7 P
1
3.85 3.75 3.75 7.7 5.2 5.3 5.3 P1
Deviation tape – plane Maximum ∆p 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3
Lateral deviation Maximum ∆h 2 2 2 2 2 2 2 2
Total thickness +/-0.2 t0.7 0.7 0.7 0.7 0.7 0.9MAX 0.9MAX 0.9MAX
Sprocket hole/cap body Nominal H
0
(2) 18.5+/-0.5 18.5+/-0.5 18.5+/-0.5 18.5+/-0.5 18.5+/-0.5 18.5+/-0.5 18.5+/-0.5 18+2/-0
Sprocket hole/top of cap body Maximum H1
(3) 32 31 43 43 43 58 58 58MAX
(1) Maximum cumulative feed hole error, 1 mm per 20 parts.
(2) 16.5 mm available on request. (3) Depending on case size.
(4) 15 mm available on request.
Lead Spacing 5 mm
Lead Spacing 7.5 mm
Lead Spacing 10 – 15mm
Lead Spacing 22.5 – 27.5 mm
Formed Leads from 10 and 15 mm to 7.5 mm
0
0
0
0
0
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3038_PHE448 • 4/4/2013 8
Film Capacitors
General Purpose, Pulse and DC Transient Suppression – PHE448 Series Polypropylene Film/Foil, Radial
H
T
W
Lead Taping & Packaging (IEC 60286–2) cont'd
Ammo Speci cations
Series Dimensions (mm)
HWT
R4x, R4x+R, R7x, RSB
360 340 59F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx,
SMR & PFR
330 330 50
Reel Speci cations
Series Dimensions (mm)
D H W
R4x, R4x+R, R7x, RSB 355
500
30
25 55 (Max)F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx,
SMR & PFR
360
500
30 46 (Max)
Manufacturing Date Code (IEC–60062)
Y = Year, Z = Month
Year Code Month Code
2000
M
January
1
2001
N
February
2
2002
P
March
3
2003
R
April
4
2004
S
May
5
2005
T
June
6
2006 UJuly 7
2007 VAugust 8
2008
W
September
9
2009
X
October
O
2010
A
November
N
2011
B
December
D
2012
C
2013
D
2014
E
2015 F
2016
H
2017
J
2018
K
2019
L
2020
M
D
W
H
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3038_PHE448 • 4/4/2013 9
Film Capacitors
General Purpose, Pulse and DC Transient Suppression – PHE448 Series Polypropylene Film/Foil, Radial
KEMET Corporation
World Headquarters
2835 KEMET Way
Simpsonville, SC 29681
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Corporate Of ces
Fort Lauderdale, FL
Tel: 954-766-2800
North America
Southeast
Lake Mary, FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
Central
Novi, MI
Tel: 248-994-1030
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Europe
Southern Europe
Paris, France
Tel: 33-1-4646-1006
Sasso Marconi, Italy
Tel: 39-051-939111
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Kamen, Germany
Tel: 49-2307-438110
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-460122
Espoo, Finland
Tel: 358-9-5406-5000
Asia
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Shenzhen, China
Tel: 86-755-2518-1306
Beijing, China
Tel: 86-10-5829-1711
Shanghai, China
Tel: 86-21-6447-0707
Taipei, Taiwan
Tel: 886-2-27528585
Southeast Asia
Singapore
Tel: 65-6586-1900
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3038_PHE448 • 4/4/2013 10
Film Capacitors
General Purpose, Pulse and DC Transient Suppression – PHE448 Series Polypropylene Film/Foil, Radial
Other KEMET Resources
Tools
Resource Location
Con gure A Part: CapEdge http://capacitoredge.kemet.com
SPICE & FIT Software http://www.kemet.com/spice
Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask
Electrolytic LifeCalculator http://www.kemet.com:8080/elc
Product Information
Resource Location
Products http://www.kemet.com/products
Technical Resources (Including Soldering Techniques) http://www.kemet.com/technicalpapers
RoHS Statement http://www.kemet.com/rohs
Quality Documents http://www.kemet.com/qualitydocuments
Product Request
Resource Location
Sample Request http://www.kemet.com/sample
Engineering Kit Request http://www.kemet.com/kits
Contact
Resource Location
Website www.kemet.com
Contact Us http://www.kemet.com/contact
Investor Relations http://www.kemet.com/ir
Call Us 1-877-MyKEMET
Twitter http://twitter.com/kemetcapacitors
Disclaimer
All product speci cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are
not intended to constitute – and KEMET speci cally disclaims – any warranty concerning suitability for a speci c customer application or use. The Information is intended for use only
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3038_PHE448 • 4/4/2013 11
Film Capacitors
General Purpose, Pulse and DC Transient Suppression – PHE448 Series Polypropylene Film/Foil, Radial
Digitally signed by Jeannette Calvo
DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corp., ou=Marketing Communications,
cn=Jeannette Calvo, email=jeannettecalvo@kemet.com
Date: 2013.04.05 16:01:34 -04'00'