M00486-00 - HONEYWELL - Datasheet.Live

FEATURES

• Pressure range of 6 bar to 550 bar | 50 psi to 8,000 psi

• ±0.25% full scale accuracy Best Fit Straight Line (BFSL)

• Total Error Band (TEB) as low as 2 %FSS

• Compensated and operating temperature range of -40°C to

125°C [-40°F to 257°F] (see Table 4)

• Less than 2 ms response time

• Fully temperature compensated, calibrated and amplified

• Rated IP65 or better for protection from most harsh

environments

• RoHS, CE, UL Component Recognition for USA and Canada:

File No. E258956

POTENTIAL APPLICATIONS

• Industrial: Compressors, cylinder tank pressure, HVAC,

hydraulics, oil and gas, refrigeration, water distribution

• Transportation: Multiple applications including braking and

alternative fuels

• Medical: Anesthesia delivery machines, blood analyzers,

chemistry analyzers, gas chromatography, oxygen

concentrators, and ventilators

PORTFOLIO

The MLH Series joins the PX3 Series, PX2 Series, SPT Series

heavy duty pressure transducers and the 13 mm Series and

19 mm Series heavy duty pressure transducers.

Sensing and Internet of ThingsSensing and Internet of Things

DESCRIPTION

The MLH Series Heavy Duty Pressure Transducers combine

Application Speciﬁc Integrated Circuit (ASIC) technology

with a media-isolated, metal diaphragm design. This digitally

compensated transducer offers value and performance,

making it a suitable pressure sensing solution for demanding

applications. Industry standard electrical connectors and

pressure ports are offered for enhanced reliability and user

ﬂexibility.

The MLH Series has six standard output options:

• Ratiometric: 0.5 Vdc to 4.5 Vdc from 5 Vdc excitation

• Current: 4 mA to 20 mA

• Regulated: 1 Vdc to 6 Vdc

• Regulated: 0.25 Vdc to 10.25 Vdc

• Regulated: 0.5 Vdc to 4.5 Vdc

• Regulated: 1 Vdc to 5 Vdc

VALUE TO CUSTOMERS

• Total Error Band (TEB) as low as 2 %FSS from -40°C

to 125°C: Provides indication of the transducer’s true

measurement performance over a specified temperature

range; small error promotes system uptime and efficiency. (See

Figure 1.)

• All metal wetted parts allow for potential use in a wide variety

of fluid applications.

• No internal elastomeric seals eliminate O-ring compatibility

issues.

• Amplified outputs reduce the need to purchase external

amplifiers.

• Input reverse voltage protection guards against mis-wiring.

• Less than 2 ms response time provides more accurate, high

speed measurement.

Datasheet

Heavy Duty Pressure Transducers

MLH Series, 6 bar to 550 bar | 50 psi to 8000 psi

32328895

Issue B

Figure 1. Total Error Band (TEB) Definition

Total

Error

Band

Accuracy

BFSL

Sources of Error

Thermal Hysteresis

Thermal Effect on Offset

Thermal Effect on Span

Pressure Non-Linearity

Pressure Hysteresis

Full Scale Span

Offset

Pressure Non-Repeatability

2Sensing and Internet of Things

Heavy Duty Pressure Transducers

MLH Series, 6 bar to 550 bar | 50 psi to 8000 psi

Table 2. Electrical Specifications (At 25°C [77°F] unless otherwise noted.)

Characteristic

Output Signal

Ratiometric

Current

Regulated

Zero output 0.5 Vdc 4 mA 1 Vdc 0.25 Vdc 0.5 Vdc 1 Vdc

Full scale

span (FSS)

4 Vdc

(0.5 Vdc to 4.5 Vdc)

16 mA

(4 mA to 20 mA)

5 Vdc

(1 Vdc to 6 Vdc)

10 Vdc

(0.25 Vdc to 10.25 Vdc)

4 Vdc

(0.5 Vdc to 4.5

Vdc)

4 Vdc

(1 Vdc to 5 Vdc)

Excitation 5 Vdc

(6 Vdc max.)1

9.5 Vdc to

30 Vdc2

8 Vdc to

30 Vdc2

14 Vdc to

30 Vdc2

7 Vdc to

30 Vdc2

8 Vdc to

30 Vdc2

Supply

current

4 mA typ.,

8 mA max. N/A 5 mA typ.,

17 mA max.

5 mA typ.,

17 mA max.

5 mA typ.,

17 mA max.

5 mA typ.,

17 mA max.

Source

(nominal) 1 mA N/A 1 mA 1 mA 1 mA 1 mA

Sink

(nominal

1 mA

at zero output N/A A1 mA

at zero output

1 mA

at zero output

1 mA

at zero output

1 mA

at zero output

Supply

rejection ratio 90 dB 90 dB 90 dB 90 dB 90 dB 90 dB

Output

impedance 25 Ohm max. N/A 25 Ohm max. 25 Ohm max. 25 Ohm max. 25 Ohm max.

1 Maintains ratiometricity at 5 ±0.25 Vdc excitation. Product can tolerate 6 Vdc excitation without damage.

2 See Figures 2 and 3 for more information regarding maximum excitation voltage vs. operating temperature.

Table 1. Pressure Range Specifications1 (At 25°C [77°F] and at rated excitation unless otherwise specified.)

bar psi

Operating

Pressure

Proof

Pressure

Burst

Pressure

Operating

Pressure

Proof

Pressure

Burst

Pressure2

618 60 50 150 500

10 30 100 100 300 1000

16 48 160 150 450 1500

25 75 250 200 600 2000

40 80 400 250 750 2500

60 120 600 300 900 3000

100 200 1000 500 1500 5000

160 320 1600 1000 2000 10000

250 500 2068 2000 4000 20000

350 700 2068 3000 6000 30000

500 750 2068 5000 7500 30000

550 825 2068 8000 12000 30000

1 Comparable metric units follow same proof and burst specifications.

2 Bonded washer seal used on G 1/8 (DIN 3852-2) port is limited to 25000 psi burst.

Table 3. Pressure Reference Types

Pressure Reference Description

Sealed gage1Output is proportional to the difference between applied pressure and a built-in fixed reference to

1 atmA, where the minimum operating pressure is set to 14.7 psiA (1 atmA).

Vented gage (relative) 2

Transducer measures pressure relative to ambient pressure. Output is proportional to the difference

between applied pressure and atmospheric (ambient) pressure, where the minimum operating

pressure is set to atmospheric pressure.

Sensing and Internet of Things

Heavy Duty Pressure Transducers

MLH Series, 6 bar to 550 bar | 50 psi to 8000 psi

Table 5. Performance Specifications (At 25°C [77°F] unless otherwise noted.)

Characteristic Parameter

Response time <2 ms

Accuracy1:

>100 psi

<100 psi

±0.25 %FSS

±0.50 %FSS

Total Error Band2:

Vented gage (relative):

<300 psig

>300 psig

Sealed gage:

without L, M, P electrical connector types:

100 psis to 299 psis (-40°C to 85°C [-40°F to 185°F])

100 psis to 299 psis (>85°C to 125°C [>185°F to 257°F])

>300 psis (-40°C to 125°C [-40°F to 257°F])

with L, M, P electrical connector types:

100 psis to 299 psis (-40°C to 65°C [-40°F to 149°F])

100 psis to 299 psis (>65°C to 125°C [>149°F to 257°F])

>300 psis (-40°C to 65°C [-40°F to 149°F])

>300 psis (>65°C to 125°C [>149°F to 257°F])

±3 %FSS

±2 %FSS

±3 %FSS

±10 %FSS

±2 %FSS

±10 %FSS

±15 %FSS

±5 %FSS

±15 %FSS

1Includes pressure non-linearity (BFSL), pressure hysteresis and pressure non-repeatability. Thermal errors are not included. (See

Figure 1.)

2 Includes offset error, full scale span error, pressure non-linearity (BFSL), pressure hysteresis, pressure non-repeatability, thermal

effect on offset, thermal effect on span, and thermal hysteresis. (See Figure 1.)

Table 4. Environmental and Mechanical Specifications (At 25°C [77°F] unless otherwise noted.)

Characteristic Parameter

Material in contact with media:

port

diaphragm

stainless steel 304L

Haynes 214 alloy

Housing material black plastic – Amodel AS-4133 HS – PPA

Weight (typical for Metri-Pack 150 and 1/8 NPT

pressure port types) 57.0 g [2.0 oz]

Shock 100 g peak [11 ms]

Vibration MIL-STD-810C, Figure 514.2-5, Curve AK, Table 514.2-V,

Random Vibration Test (overall g rms = 20.7 min.)

Compensated and operating temperature range:

0.5 Vdc to 4.5 Vdc ratiometric output

all regulated and 4 mA to 20 mA outputs

-40°C to 125°C [-40°F to 257°F]

-40°C to 125°C [-40°F to 257°F] (See Figures 2 and 3 for operating area details.)

Storage temperature range -40°C to 125°C [-40°F to 257°F]

Approvals RoHS, CE, UL Component Recognition for USA and Canada: File No. E258956

4Sensing and Internet of Things

Heavy Duty Pressure Transducers

MLH Series, 6 bar to 550 bar | 50 psi to 8000 psi

Figure 3. Current Output Operating and Temperature Compensation

Note: The operating area is extended with a 250 Ohm resistor. Higher loads extend the operating area. The dot indicates the

maximum operating temperature when using a 24 V supply and a 250 Ohm resistor.

Figure 2. Regulated Output Operating and Temperature Compensation

Note: The dot indicates the maximum operating temperature of 125°C [257°F] with a 24 V supply.

Supply Voltage (Vdc)

10 12 14 16 18 20 22 24 26 28 3068

116

121

122

123

124

125

117

118

119

120

Operating Temperature (°C)

Operating and temperature

compensated area

for regulated output

100

105

110

115

120

125

Supply Voltage (Vdc)

Operating Temperature (°C)

Operating and temperature

compensated area

for current output

10 Ohm

load

250 Ohm

load

10 12 14 16 18 20 22 24 26 28 3068

CAUTION

PRODUCT DAMAGE DUE TO MECHANICAL ISSUES

• Ensure torque speciﬁcations are determined for the speciﬁc application. Values provided are for reference only. (Mating

materials and thread sealants can result in signiﬁcantly different torque values from one application to the next.)

• When using mating parts made of stainless steel, use a thread sealant with anti-seize properties to prevent thread galling.

Ensure the sealant is rated for the application.

• Use appropriate tools (such as an open ended wrench or deep well socket) to install transducers.

• Always hand-start transducers into the hole to prevent cross threading and damage.

• Ensure that torque is not applied to the electrical connector.

• Ensure that the proper mating electrical connector with a seal is used to connect the transducer. Improper or damaged

seals can compromise ingress protection, leading to short circuits.

Failure to comply with these instructions may result in product damage.

CAUTION

PRODUCT DAMAGE DUE TO PARTICULATES

• Ensure that a ﬁlter is used upstream of the transducer to keep media ﬂow free of larger particulates and increased humidity.

All MLH Series transducers are dead-ended devices; particulate accumulation and condensing moisture may affect

transducer output.

• It is recommend that the transducer be positioned with the port facing downwards; any particulates in the system are less

likely to enter and settle within the pressure transducer if it is in this position.

• Ensure that the media does not create a residue when dried. Build-up inside the transducer may affect transducer output;

rinsing of a dead-ended transducer is potentially difﬁcult and has limited effectiveness in removing residue.

Failure to comply with these instructions may result in product damage.

Sensing and Internet of Things

Heavy Duty Pressure Transducers

MLH Series, 6 bar to 550 bar | 50 psi to 8000 psi

Figure 4. Nomenclature and Order GuideE

MLH 150 P S B 01 B

Output Transfer Function

For example, MLH150PSB01B deﬁnes an MLH Series Heavy Duty Pressure Transducer, 150 psi pressure range, sealed

gage pressure reference, Metri-Pack 150 electrical connector type, 1/4-18 NPT pressure port type, 4 mA to 20 mA output

Unit

B bar

psi

Pressure Reference

G Vented gage (relative)

Sealed gage2

Heavy

Duty

Pressure

Transducer1

Series

Pressure Port Type

Electrical Connector Type

MLH

DIN 43650-C, 8 mm male

Cable harness,

1 meter cable

length3

Pressure Range

M12x1

(Brad Harrison micro)

Cable harness,

3 meter cable

length33

Metri-Pack 1503

psi bar

050

100

150

200

250

300

500

01K

02K

03K

05K

08K

100

150

200

250

300

500

1000

2000

3000

5000

8000

AMP Superseal 1.54

Deutsch DTM04-3P

(integral)

Flying leads

Hirschmann

006

010

016

025

040

060

100

160

250

350

500

550

100

160

250

350

500

550

Not all catalog listing combinations are available. Custom products are available. Please contact Honeywell.

Sealed gage option is only available in pressure ranges at or above 8 bar | 100 psi.

Metri-Pack 150 mating connectors with shielded cable and 22 AWG wire are available from Honeywell. Order part no. 3685301 for 1 m [3.2 ft] cable length and part no. 3685302 for 3 m

[9.8 ft] cable length.

Available with Output Transfer Function A only.

Seal accessory is included with the sensor. Seal accessory materials and speciﬁcations are: O-ring (nitrile, durometer 90, temperature range -30°C to 125°C), bonded washer (steel outer

ring with nitrile inner ring, temperature range -30°C to 125°C), elastomeric seal (nitrile, temperature range -30°C to 125°C).

When using the bonded washer accessory supplied by Honeywell, the customer’s female port connection design should follow DIN 3852-1: 2000-11 size large. If compliance to

DIN 3852-1:2014-05 is required, contact Honeywell for alternate options.

1/4-18 NPT

(ANSI B1.20.1)

3/8-24 UNF with O-ring seal

(SAE J1926-2)

7/16-20 UNF with O-ring seal

(SAE J1926-2)

1/2-20 UNF with O-ring seal

(SAE J1926-2)

9/16-18 UNF with O-ring seal

(SAE J1926-2)

7/16-20 UNF

1/4 in 45º

Flare Female

Schrader with

depressor

R 1/8-28 BSPT

(ISO 7-1)

1/2-14 NPT

(ANSI B1.20.1)

R 1/4-19 BSPT

(ISO 7-1)

1/8-27 NPT

(ANSI B1.20.1)

M10x1 with O-ring seal

(ISO 6149-2)5

M12x1.5 with O-ring seal

(ISO 6149-2)5

M14x1.5 with O-ring seal

(ISO 6149-2)5

M16x1.5 with O-ring seal

(ISO 6149-2)5

M20x1.5 with O-ring seal

(ISO 6149-2)

18x1.5 with O-ring seal

(ISO 6149-2)

G1/8-28 BSPP

with bonded washer

(DIN 3852-2)

G1/4-19 BSPP

with bonded washer

(DIN 3852-2)

G1/8-28 BSPP

with elastomeric seal

(ISO 1179-2)

G1/4-19 BSPP

with elastomeric seal

(ISO 1179-2)

Ratiometric: 0.5 Vdc to 4.5 Vdc

from 5 Vdc excitation

Current: 4 mA to 20 mA

Regulated: 1 Vdc to 6 Vdc

Regulated: 0.25 Vdc to 10.25 Vdc

Regulated: 0.5 Vdc to 4.5 Vdc

Regulated: 1 Vdc to 5 Vdc

Metri-Pack 150 mating connector

6Sensing and Internet of Things

Heavy Duty Pressure Transducers

MLH Series, 6 bar to 550 bar | 50 psi to 8000 psi

Figure 5. Electrical Connector Type Mounting Dimensions (For reference only. mm/[in].)

Metri-Pack 150

Hirschmann

M12x1 (Brad Harrison micro)

DIN 43650-C, 8 mm male

Connector: Delphi 12078088

Mating connector: Delphi

12110192

IP rating1: IP65 (all versions)

Connector: Hirschmann G

series, 4-pole (small cubic

connector)

Mating connector: Hirschman

G4WF or equivalent

IP rating1: IP65 (all versions)

Connector: DS/EN 61076-2-

101 (IEC 61076-2-101)

Mating connector: 4 POS

Type D

IP rating1: IP65, IP67 (sealed

gage versions), IP65 (vented

gage versions)

Connector: DIN 43650C, 8 mm

Mating connector: DIN

43650C, 8 mm

IP rating1: IP65 (all versions)

Voltage

Output

(3-wire)

Current

Output

(2-wire)

Voltage

Output

(3-wire)

Current

Output

(2-wire)

Voltage

Output

(3-wire)

Current

Output

(2-wire)

Voltage

Output

(3-wire)

Current

Output

(2-wire)

A+excitation +excitation 1no

connection

connection 1+excitation +excitation 1+excitation +excitation

Bcommon no

connection 2output no

connection 2common -excitation

(return) 2common -excitation

(return)

Coutput -excitation

(return) 3common -excitation

(return) 3output no

connection 3no

connenction

connection

4+excitation +excitation 4no

connection

connection 4output no

connection

“P”

Hex ﬂat to ﬂat

27,0

[1.06]

“H”

“H” = 41,7

[1.64]

ø16,51

[0.46]

Pin A

Pin C

Pin B

No connection

Hole

(Vented

gage

versions

only)

“H” = 32,6

[1.28]

ø16,0

[0.63]

Pin 1

Pin 3

Pin 2

Pin 4

Hole

(Vented

gage

version

only)

“H” = 33,5

[1.32]

ø10,0

[0.39]

Pin 1

Pin 3

Pin 2

Pin 4

Hole

(Vented

gage

versions

only)

“H” = 30,1

[1.19]

17,0

[0.67]

Pin 1

Pin 3

Pin 2

Pin 4

Hole

(Vented

gage

versions

only)

“H” + “P” = total nominal product length General product marking

Catalog listing

Date code

Sensing and Internet of Things

Heavy Duty Pressure Transducers

MLH Series, 6 bar to 550 bar | 50 psi to 8000 psi

Figure 5. Electrical Connector Type Mounting Dimensions (continued)

AMP Superseal 1.5

Cable Harness, 1 Meter

Cable Harness, 3 Meter

Flying Leads

Deutsch DTM04-3P

(integral)

Connector: Amp 282087

Mating connector: Amp

282087

IP rating1: IP65 (all versions)

Connector: 24 AWG with TPE

jacket

Mating connector: Flying

leads

IP rating1: IP65, IP67, IP69K

(sealed gage versions), IP65

(vented gage versions)

Connector: 6 in flying leads

with 20 AWG wire and PE

insulation

IP rating1: IP65, IP67, IP69K

(sealed gage versions), IP65

(vented gage versions)

Connector: DTM04-3P

Mating connector: DTM06-

3S with wedgelock WM-3S

IP rating1: IP65, IP67, IP69K

(sealed gage versions), IP65

(vented gage versions)

Voltage

Output

(3-wire)

Wire

Color

Voltage

Output

(3-wire)

Current

Output

(2-wire)

Wire

Color

Voltage

Output

(3-wire)

Current

Output

(2-wire)

Voltage

Output

(3-wire)

Current

Output

(2-wire)

1common red +excitation +excitation red +excitation +excitation 1+excitation +excitation

2output white output -excitation

(return) white common -excitation

(return) 2common -excitation

(return)

3+excitation black common

connection

(black wire

removed)

black output

connection

(black wire

removed)

3output no

connection

1 IP rating is determined by the electrical connector type chosen.

2 Three-wire cable is required for ratiometric and regulated voltage outputs; two wire cable is required for current output.

“H” = 41,0

[1.61]

13,8

[0.54]

Pin 1

Pin 3

Pin 2

Hole

(Vented

gage

versions

only)

“H” = 35,3

[1.39]

ø10,8

[0.43]

White

Red

Black

Hole

(Vented

gage

versions

only)

(Used for voltage

ouptut only)

“H” = 42,6

[1.68]

13,4

[0.53]

Pin 3

Pin 2 Pin 1

Hole

(Vented

gage

versions

only)

“H” = 35,3

[1.39]

Black

Hole

(Vented

gage

versions

only)

Red

White

ø10,8

[0.43]

(Used for voltage

ouptut only)

8Sensing and Internet of Things

Heavy Duty Pressure Transducers

MLH Series, 6 bar to 550 bar | 50 psi to 8000 psi

Figure 6. Pressure Port Type Mounting Dimensions (For reference only: mm/[in].)1

1/4-18 NPT

1/8-27 NPT

7/16-20 UNF 1/4 in 45º

Flare Female Schrader with depressor

Seal: Pipe thread

Mating geometry: ANSI B1.20.1-2013

Installation torque: 2 to 3 turns from

finger tight

Seal: Pipe thread

Mating geometry: ANSI B1.20.1-2013

Installation torque: 2 to 3 turns from

finger tight

Seal: 45º cone

Mating geometry: SAE J512

Installation torque: 20 Nm [14.8 ft-lb]

1/2-14 NPT

R1/4-19 (BSPT)

R1/8-28 (BSPT)

Seal: Pipe thread

Mating geometry: ANSI B1.20.1-2013

Installation Torque: 2 to 3 turns from

finger tight

Seal: Pipe thread

Mating geometry: ISO 7-1

Installation Torque: 2 to 3 turns from

finger tight

Seal: Pipe thread

Mating geometry: ISO 7-1

Installation Torque: 2 to 3 turns from

finger tight

3/8-24 UNF (SAE J1926-2)

7/16 -20 UNF (SAE J1926-2)

1/2-20 UNF (SAE J1926-2)

Seal1: O-ring

Mating geometry: SAE J1926-1

Installation torque: 10 N m [7.4 ft-lb]

Seal1: O-ring

Mating geometry: SAE J1926-1

Installation torque: 20 N m [14.8 ft-lb]

Seal1: O-ring

Mating geometry: SAE J1926-1

Installation torque: 40 N m [29.5 ft-lb]

9/16-18 UNF (SAE J1926-2)

M10x1.0 (ISO 6149-2)

M12x1.5 (ISO 6149-2)

Seal1: O-ring

Mating geometry: SAE J1926-1

Installation torque: 45 N m [33.2 ft-lb]

Seal1: O-ring

Mating geometry: ISO 6149-2

Installation torque: 20 N m [14.8 ft-lb]

Seal1: O-ring

Mating geometry: ISO 6149-2

Installation torque: 45 N m [33.2 ft-lb]

15,2

[0.60]

“P” = 20,1

[0.79] 10,2

[0.40]

“P” = 15,0

[0.59] 12,7

[0.50]

“P” = 17,5

[0.69]

20,1

[0.79]

“P” = 24,9

[0.98] 14,7

[0.58]

“P

” = 19,6

[0.77]

“P” = 15,0

[0.59] 10,2

[0.40]

13,5

[0.53]

“P” = 18,3

[0.72] 15,0

[0.59]

“P” = 19,8

[0.78] 15,0

[0.59]

“P” = 19,8

[0.78]

16,0

[0.63]

“P” = 20,8

[0.82] “P” = 15,9

[0.63] 11,1

[0.44]

“P” = 18,3

[0.72] 13,5

[0.53]

“P”

Hex ﬂat to ﬂat

27,0

[1.06]

“H”

“H” + “P” = total nominal product length General product marking

Date code

Catalog listing

Sensing and Internet of Things

Heavy Duty Pressure Transducers

MLH Series, 6 bar to 550 bar | 50 psi to 8000 psi

Figure 6. Pressure Port Type Mounting Dimensions (continued)

M14x1.5 (ISO 6149-2)

M16x1.5 (ISO 6149-2)

M18x1.5 (ISO 6149-2)

Seal1: O-ring

Mating geometry: ISO 6149-1

Installation torque: 45 N m [33.2 ft-lb]

Seal1: O-ring

Mating geometry: ISO 6149-1

Installation torque: 55 N m [40.6 ft-lb]

Seal1: O-ring

Mating geometry: ISO 6149-1

Installation torque: 70 N m [51.6 ft-lb]

M20x1.5 (ISO 6149-2)

G1/8-28 (BSPP) DIN 3852-2

G1/4-19 (BSPP) DIN 3852-2

Seal1: O-ring

Mating geometry: ISO 6149-1

Installation torque: 80 N m [59.0 ft-lb]

Seal1: Bonded washer

Mating geometry with bonded washer:

DIN3852-1; 200 0 -11, large

Installation torque: 20 N m [14.8 ft-lb]

Seal1: Bonded washer

Mating geometry with bonded washer:

DIN 3852-1:2000-11, large

Installation torque: 50 N m [36.9 ft-lb]

G1/8-28 (BSPP) ISO 1179-2

G1/4-19 (BSPP) ISO 1179-2

Seal1: Elastomeric

Mating geometry: ISO 1179-1

Installation torque: 20 N m [14.8 ft-lb]

Seal1: Elastomeric

Mating geometry: ISO 1179-1

Installation torque: 50 N m [36.9 ft-lb]

1 Seal accessory included with transducer. Seal accessory material and specifications: O-ring (nitrile, durometer 90, temperature range -30°C

to 125°C), bonded washer (steel outer ring with nitrile inner ring, temperature range -30°C to 125°C), elastomeric seal (nitrile, temperature

range -30°C to 125°C).

“P” = 18,3

[0.72] 13,5

[0.53]

“P” = 19,8

[0.78]

15,0

[0.59]

“P” = 21,3

[0.84] 16,5

[0.65]

“P” = 21,3

[0.84]

16,5

[0.65]

“P” = 14,6

[0.57] 9,7

[0.38]

2,0

[0.08]

ø10,4

[0.41]

ø15,9

[0.63]

Bonded washer

Bonded

washer

“P” = 19,0

[0.75] 14,1

[0.56]

2,0

[0.08]

ø13,7

[0.54]

ø20,6

[0.81]

Bonded washer

Bonded

washer

9,5

[0.37]

“P” =14,3

[0.56]

0,5

[0.02]

1,0

[0.04]

120°

ø8,4

[0.33]

ø11,9

[0.47]

Proper assembly o

seal to stud end

Elastomeric

seal

“P” = 18,8

[0.74] 14,0

[0.55]

0,8

[0.03]

1,5

[0.06]

120°

ø11,6

[0.46]

ø16,5

[0.65]

Proper assembly o

seal to stud end

Elastomeric

seal

Honeywell Sensing and Internet of Things

9680 Old Bailes Road

Fort Mill, SC 29707

www.honeywell.com

For more information

Honeywell Sensing and Internet of

Things services its customers through a

worldwide network of sales offices and

distributors. For application assistance,

current specifications, pricing or the

nearest Authorized Distributor, visit

sensing.honeywell.com or call:

Asia Pacific +65 6355-2828

Europe +44 (0) 1698 481481

USA/Canada +1-800-537-6945

WARNING

PERSONAL INJURY

DO NOT USE these products as safety or emergency stop

devices or in any other application where failure of the

product could result in personal injury.

Failure to comply with these instructions could result in

death or serious injury.

WARNING

MISUSE OF DOCUMENTATION

• The information presented in this datasheet is for

reference only. Do not use this document as a product

installation guide.

• Complete installation, operation, and maintenance

information is provided in the instructions supplied with

each product.

Failure to comply with these instructions could result in

death or serious injury.

32328895-B-EN | B | 03/18

ADDITIONAL INFORMATION

The following associated literature is available on the

Honeywell web site at sensing.honeywell.com:

• Product line guide

• Product range guide

• Product installation instructions

• Product CAD models

Warranty/Remedy

Honeywell warrants goods of its manufacture as being free

of defective materials and faulty workmanship during the

applicable warranty period. Honeywell’s standard product

warranty applies unless agreed to otherwise by Honeywell in

writing; please refer to your order acknowledgement or consult

your local sales office for specific warranty details. If warranted

goods are returned to Honeywell during the period of

coverage, Honeywell will repair or replace, at its option, without

charge those items that Honeywell, in its sole discretion, finds

defective. The foregoing is buyer’s sole remedy and is in lieu

of all other warranties, expressed or implied, including those

of merchantability and fitness for a particular purpose. In no

event shall Honeywell be liable for consequential, special, or

indirect damages.

While Honeywell may provide application assistance

personally, through our literature and the Honeywell web site, it

is buyer’s sole responsibility to determine the suitability of the

product in the application.

Specifications may change without notice. The information we

supply is believed to be accurate and reliable as of this writing.

However, Honeywell assumes no responsibility for its use.