https://www.phoenixcontact.com/us/produkte/2839363
05.10.2012Page1/5
Surge protection base element-PT 4X1-BE-2839363
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Base element for protective plug PT with protective circuit for 4 conductors of signal circuits grounded
on one side, with bridge between the connections 3-4 (GND) and 9-10, for mounting on NS 35/7.5
and NS 35/15, housing width: 17.5 mm
Why buy this product
Plugs can be checked with CHECKMASTER
Installed in conjunction with the PT 4x1…-BE base element
Maximum ease of maintenance thanks to the two-piece design
Base element remains an integral part of the installation
Consistent plug-in signal circuit protection
Protection for four conductors with common reference potential
Impedance-neutral disconnection of plug for test and maintenance purposes
Key commercial data
Packing unit 1
Minimum order quantity 10
Catalog page Page 93 (TT-2011)
GTIN
Custom tariff number 85363010
Country of origin GERMANY
Technical data
General
Inflammability class according to UL 94 V0
Color black
Ambient temperature (operation) -40 °C ... 85 °C
Mounting type DIN rail: 35 mm
Design DIN rail module, two-section, divisible
Degree of protection IP20
Width 17.7 mm
Height 89.8 mm
Depth 52 mm
https://www.phoenixcontact.com/us/produkte/2839363
05.10.2012Page2/5
Surge protection base element-PT 4X1-BE-2839363
Technical data
General
Pitch unit 1 Div.
Protective circuit
Nominal current IN 300 mA (45°C)
Resistance in series 4.7 Ω 10 %
Message: Surge protection fault None
Connection data
Connection method Screw connection
Connection type IN Screw terminal blocks
Connection type OUT Screw terminal blocks
Screw thread M3
Tightening torque 0.5 Nm
Stripping length 8 mm
Conductor cross section stranded min. 0.2 mm²
Conductor cross section stranded max. 2.5 mm²
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 4 mm²
Conductor cross section AWG/kcmil min. 24
Conductor cross section AWG/kcmil max 12
Classifications
eclass
eCl@ss 4.0 27140201
eCl@ss 4.1 27130801
eCl@ss 5.0 27130801
eCl@ss 5.1 27130801
eCl@ss 6.0 27130803
eCl@ss 7.0 27130803
etim
ETIM 2.0 EC000472
ETIM 3.0 EC000472
ETIM 4.0 EC000472
ETIM 5.0 EC000472
unspsc
UNSPSC 6.01 30212010
UNSPSC 7.0901 39121610
UNSPSC 11 39121610
UNSPSC 12.01 39121610
UNSPSC 13.2 39121620
https://www.phoenixcontact.com/us/produkte/2839363
05.10.2012Page3/5
Surge protection base element-PT 4X1-BE-2839363
Approvals
Approvals
Approvals
UL Listed / GOST / GL
Ex Approvals
UL Listed / cUL Listed / cULus Recognized
Approvals submitted
Approval details
UL Listed
GOST
GL
Accessories
Accessories
Assembly
Shield connection-SSA 5-10-2839512
Shield fast connection for conductor diameters 5 - 10 mm. Potential connection cable: 200 mm, black
Shield connection-SSA 3-6-2839295
shield fast connections for conductor diameter 3 - 6 mm. Potential connection cable: 200 mm, black
https://www.phoenixcontact.com/us/produkte/2839363
05.10.2012Page4/5
Surge protection base element-PT 4X1-BE-2839363
Accessories
Marking
Zack marker strip-ZB 5 :UNBEDRUCKT-1050004
Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker
groove, For terminal block width: 5.2 mm, Lettering field: 5.1 x 10.5 mm
Zack Marker strip, flat-ZBF 5:UNBEDRUCKT-0808642
Zack Marker strip, flat, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into flat
marker groove, For terminal block width: 5 mm, Lettering field: 5.1 x 5.2 mm
Zack marker strip-ZB 5,8:UNBEDRUCKT-2715209
Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker
groove, For terminal block width: 5.8 mm, Lettering field: 5.75 x 10.5 mm
Marker pen-X-PEN 0,35-0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line
thickness 0.35 mm
Marker pen-B-STIFT-1051993
Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm
Drawings
https://www.phoenixcontact.com/us/produkte/2839363
05.10.2012Page5/5
Surge protection base element-PT 4X1-BE-2839363
Dimensioned drawing
44,8
90
51,5
65,5
The figure shows the complete module consisting of a base element
and connector
© Phoenix Contact 2012 - all rights reserved
http://www.phoenixcontact.com