DF2B7AE ESD Protection Diodes Silicon Epitaxial Planar DF2B7AE 1. General The DF2B7AE is a TVS diode (ESD protection diode) protects semiconductor devices used in mobile device interfaces and other applications to protect against static electricity and noise. Utilizing snapback characteristics, the DF2B7AE provides low dynamic resistance and superior protective performance. Furthermore, the DF2B7AE is housed in an ultra-compact package (0.8 x 1.2 mm) to meet applications that require a small footprint. 2. Applications Mobile Equipment Smartphones Tablets Notebook PCs Desktop PCs Note: This product is designed for protection against electrostatic discharge (ESD) and is not intended for any other purpose, including, but not limited to, voltage regulation. 3. Features (1) Suitable for use with a 5 V signal line. (VRWM 5.5 V) (2) Protects devices with its high ESD performance. (VESD = 30 kV (Contact / Air) @IEC61000-4-2) (3) Low dynamic resistance protects semiconductor devices from static electricity and noise. (RDYN = 0.2 (typ.)) (4) Snapback characteristics realizing low clamping voltage protects semiconductor devices. (VC = 11 V@IPP = 4 A (typ.)) (5) Compact package is suitable for use in high density board layouts such as in mobile devices. SOD-523: 0.8 x 1.2 mm size (Toshiba package name: ESC) 4. Example of Circuit Diagram Start of commercial production (c)2016 Toshiba Corporation 1 2016-10 2016-11-01 Rev.1.0 DF2B7AE 5. Quick Reference Data Characteristics Working peak reverse voltage Total capacitance Symbol Note VRWM (Note 1) Ct Test Condition Min Typ. Max Unit 5.5 V VR = 0 V, f = 1 MHz 8.5 10 pF Dynamic resistance RDYN (Note 2) 0.2 Electrostatic discharge voltage (IEC61000-4-2) (Contact) VESD (Note 3) 30 kV Note 1: Recommended operating condition. Note 2: TLP parameters: Z0 = 50 , tp = 100 ns, tr = 300 ps, averaging window: t1 = 30 ns to t2 = 60 ns, extraction of dynamic resistance using least squares fit of TLP characteristics between IPP1 = 8 A and IPP2 = 16 A. Note 3: Criterion: No damage to devices. 5.1. ESD Clamp Waveform (Note) Fig. 5.1.1 +8 kV Fig. 5.1.2 -8 kV Fig. 5.1.3 IEC61000-4-2 (Contact) Note: The above characteristics curves are presented for reference only and not guaranteed by production test, unless otherwise noted. (c)2016 Toshiba Corporation 2 2016-11-01 Rev.1.0 DF2B7AE 5.2. TLP Characteristics (Note) Note: The above characteristics curves are presented for reference only and not guaranteed by production test, unless otherwise noted. 5.3. Clamp Voltage VC - Peak Pulse Current (IPP) (Note) Fig. 5.3.1 VC - IPP Note: Fig. 5.3.2 Based on IEC61000-4-5 8/20 s pulse. The above characteristics curves are presented for reference only and not guaranteed by production test, unless otherwise noted. (c)2016 Toshiba Corporation 3 2016-11-01 Rev.1.0 DF2B7AE 6. Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25 ) Characteristics Symbol Note Rating Unit Electrostatic discharge voltage (IEC61000-4-2) (Contact) VESD (Note 1) 30 kV 30 kV 80 W 4 A Electrostatic discharge voltage (IEC61000-4-2) (Air) Peak pulse power (tp = 8/20 s) PPK Peak pulse current (tp = 8/20 s) IPP (Note 2) Junction temperature Tj 150 Storage temperature Tstg -55 to 150 Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: According to IEC61000-4-2. Note 2: According to IEC61000-4-5. 7. Electrical Characteristics (Unless otherwise specified, Ta = 25 ) VRWM: Working peak reverse voltage VBR: Reverse breakdown voltage IBR: Reverse breakdown current IR: Reverse current VC: Clamp voltage IPP: Peak pulse current RDYN: Dynamic resistance Fig. 7.1 Definitions of Electrical Characteristics Characteristics Working peak reverse voltage Total capacitance Symbol Note VRWM (Note 1) Ct Dynamic resistance RDYN Reverse breakdown voltage VBR Reverse current IR Clamp voltage VC Test Condition Min VR = 0 V, f = 1 MHz (Note 2) (Note 3) (Note 2) Typ. Max Unit 5.5 V 8.5 10 pF 0.2 IBR = 1 mA 5.8 6.8 7.8 V VRWM = 5.5 V 100 nA IPP = 1 A 8 V IPP = 4 A 11 20 ITLP = 16 A 12 ITLP = 30 A 15 Note 1: Recommended operating condition. Note 2: TLP parameters: Z0 = 50 , tp = 100 ns, tr = 300 ps, averaging window: t1 = 30 ns to t2 = 60 ns, extraction of dynamic resistance using least squares fit of TLP characteristics between IPP1 = 8 A and IPP2 = 16 A. Note 3: Based on IEC61000-4-5 8/20 s pulse. (c)2016 Toshiba Corporation 4 2016-11-01 Rev.1.0 DF2B7AE 8. Characteristics Curves (Note) Fig. 8.1 I - V Fig. 8.2 IR - VR Fig. 8.3 Ct - VR Fig. 8.4 Ct - f Fig. 8.5 S21 - f Note: The above characteristics curves are presented for reference only and not guaranteed by production test, unless otherwise noted. (c)2016 Toshiba Corporation 5 2016-11-01 Rev.1.0 DF2B7AE 9. Packaging and Internal Circuit (Note) 1: Pin 1 2: Pin 2 ESC Note: Connect Pin 2 to GND when using Pin 1 for I/O. Connect Pin 1 to GND when using Pin 2 for I/O. 10. Marking (Top view) 11. Land Pattern Dimensions (for reference only) Unit: mm (c)2016 Toshiba Corporation 6 2016-11-01 Rev.1.0 DF2B7AE Package Dimensions Unit: mm Weight: 1.4 mg (typ.) Package Name(s) JEDEC: SOD-523 Nickname: ESC (c)2016 Toshiba Corporation 7 2016-11-01 Rev.1.0 DF2B7AE RESTRICTIONS ON PRODUCT USE * Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice. * This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. * Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. * PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT ("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales representative. * Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. * Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. * The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. * ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. * Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. * Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS. (c)2016 Toshiba Corporation 8 2016-11-01 Rev.1.0