SIOV metal oxide varistors Taping, packaging and lead configuration (for leaded varistors) Date: December 2007 Data Sheet EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Taping, packaging and lead configuration For leaded varistors 1 EPCOS ordering code system B722 10 S 2 271 K 1 0 1 Digit 1 2 3 4 ... ... ... ... 12 13 14 15 Monolithic varistor Nominal disc diameter Design: S = Leaded varistor T = ThermoFuse F = Fail-safe varistor Q = EnergetiQ Series: 0 = StandarD 1 = Automotive 2 = AdvanceD 3 = SuperioR 4 = SuperioR Max. AC operating voltage: 271 = 27 * 101 = 275 VAC 140 = 14 * 100 = 14 VAC 141 = 14 * 101 = 140 VAC Tolerance of varistor voltage: K = 10% J = 5% S = Special tolerance Lead configuration: 1 = Straight leads, 2 thru 5 = Kinked form Packaging: 0 = Bulk, 1 thru 6 = Taping style Internal coding: 1 = Standard Please read Important notes and Cautions and warnings. 2 11/07 Taping, packaging and lead configuration For leaded varistors 2 Taping and packaging of leaded varistors Tape packaging for lead spacing = 5 fully conforms to IEC 60286-2, while for lead spacings = 7.5 and 10 the taping mode is based on this standard. The overview of delivery mode on pages 11 ff lists disk types available on tape in detail, i.e. with complete ordering code and type designation. Taping mode and, if relevant, crimp style and lead spacing are coded in the type designation. For types not listed please contact EPCOS. Upon request parts with lead spacing = 5 mm are also available in Ammo pack too. 2.1 Taping in accordance with IEC 60286-2 for lead spacing 5.0 mm s h h p b p D0 H H1 W W1 B W0 L A H0 H1 W2 F d P0 P1 Direction of unreeling t Section A-B < F = e = 5.0 mm (except S ... R5) 2.2 VAR0410-X Taping based on IEC 60286-2 for lead spacing 7.5 and 10 mm s h h p b p D0 d Section A-B H1 P1 t P0 W B W0 A H H0 W1 L W2 H1 F Direction of unreeling < < F = e = 7.5 mm (including S ... R5) F = e = 10 mm (including S ... R5) Please read Important notes and Cautions and warnings. VAR0395-J 3 11/07 Taping, packaging and lead configuration For leaded varistors 2.3 Tape dimensions (in mm) Sym= 5.0 bol b s d 0.6 12.7 P0 Tolerance max. max. 0.05 0.3 0.8 12.7 1) P1 F h p 3.85 5.0 0 0 0.7 +0.6/-0.1 2.0 1.3 8.95 0.8 7.5 0.8 depends on s 0 2.0 W W0 18.0 5.5 0.5 min. 18.0 11.0 0.5 min. 18.0 11.0 0.5 min. W1 W2 H H0 9.0 3.0 18.0 16.0 (18.0) 32.2 4.0 0.9 11.0 4.0 0.5 max. +2.0/-0 0.5 9.0 3.0 18.0 16.0 (18.0) 45.0 4.0 0.9 11.0 +0.75/-0.5 max. +2.0/-0 0.5 9.0 3.0 18.0 16.0 +0.75/-0.5 max. +2.0/-0 0.5 max. 0.2 max. max. 45.0 4.0 0.9 11.0 max. 0.2 max. max. H1 D0 t L l max. 0.2 max. max. max. = 7.5 Tolerance = 10.0 Tolerance max. max. 0.05 0.3 1.0 12.7 7.7 0.8 10.0 0.8 depends on s 0 2.0 1) Taping with P0 = 15.0 mm upon request 2) Applies only to uncrimped types 3) Applies only to crimped types (H0 = 18 upon request) Please read Important notes and Cautions and warnings. max. max. 0.05 0.3 4 11/07 Remarks see tables on pages 110 ff 1 mm/20 sprocket holes measured at top of component body Peel-off force 5 N 2) 3) without lead Taping, packaging and lead configuration For leaded varistors 2.4 Taping mode Example: B72210S0271K1 5 1 Digit 14 Digit 14 Taping Reel type mode 1 2 3 4 5 6 7 G G2 G3 G4 G5 GA G2A Seating plane height H0 for crimped types mm I 16 I 18 II 16 II 18 III 16 Ammo pack 16 Ammo pack 18 Internal coding for special taping G6 III 18 G10 II 16 G11 II 18 G10A Ammo pack 16 G11A Ammo pack 18 Please read Important notes and Cautions and warnings. 5 Seating plane height H for uncrimped types mm 18 - 18 - 18 18 - mm 12.7 12.7 12.7 12.7 12.7 12.7 12.7 - 18 - 18 - 12.7 15.0 15.0 15.0 15.0 11/07 Pitch distance P0 Taping, packaging and lead configuration For leaded varistors 2.5 Reel dimensions Direction of unreeling Reel Tape VAR0078-8-E Dimensions (in mm) Reel type I II III d 360 max. 360 max. 500 max. f 31 1 31 1 23 1 n approx. 45 approx. 55 approx. 59 w 54 max. 64 max. 72 max. If reel type III is not compatible with insertion equipment because of its large diameter, nominal disk diameter 10 mm and 14 mm can be supplied on reel II upon request (taping mode G3). 2.6 Ammo pack dimensions Bamboo sticks Cardboard folding carton 340 x 226 x 55 mm 226 55 340 Paper adhesive tape, width 50 mm Label Paper adhesive tape, width 50 mm VAR0402-G Please read Important notes and Cautions and warnings. 6 11/07 Taping, packaging and lead configuration For leaded varistors 3 Lead configuration Both crimped and straight leads are standard for taped disk varistors. The leads are differently crimped for technical reasons; the individual crimp styles are denoted by consecutive numbers (S, S2 through S5) as shown in the dimensional drawings on page 7. The crimp styles of the individual types can be seen from the type designation in the ordering tables. 3.1 Crimp style mode Example: B72210S0271K 5 01 Digit 13 Digit 13 of ordering code 1 2 3 4 5 Available upon request Internal coding Internal coding Internal coding Figure 1 2 3 4 5 S9 S11 -- 6 7 8 Standard crimp styles Standard, straight leads s Crimp style S3 b s b s h h b Crimp style S2 h 3.2 Crimp style Standard, straight leads S2 S3 S4 S5 1) 1) e od a a e od e VAR0586-W Figure 1 Crimp style S4 VAR0411-F Figure 2 1)Figure Seating3plane to IECVAR0396-R 717 Crimp style S5 b s h s h b 1) 1) e od od a e 1) Seating Figure 4 plane to IECVAR0404-W 60717 Please read Important notes and Cautions and warnings. VAR0412-N Figure 5 7 11/07 1) Seating plane to IEC 60717 Taping, packaging and lead configuration For leaded varistors 3.3 Component height (hmax) for crimped versions Due to technical reasons the component height (hmax) increases if a crimp is added. The maximum height of the crimped component can be found in the table below. VRMS V Crimp style mm hmax mm 5 5 11 ... 175 210 ... 460 S2 S3 5.0 5.0 10.0 10.0 7 7 11 ... 175 210 ... 460 S2 S3 5.0 5.0 12.0 12.0 10 10 10 10 10 10 10 11 ... 300 320 ... 460 510 Automotive Automotive (D1 types) 11 ... 175 210 ... 460 S5 S3/S5 S3/S5 S5 S5 S4 S3 7.5 7.5 7.5 7.5 7.5 5.0 5.0 15.5 16.5 17.5 17.0 16.0 16.5 16.5 14 14 14 14 14 11 ... 300 320 ... 460 510 Automotive Automotive (D1 types) S5 S3/S5 S3/S5 S5 S5 7.5 7.5 7.5 7.5 7.5 20.0 20.0 21.5 21.0 20.0 20 20 11 ... 320 385 ... 510 S5 S5 10.0 10.0 27.0 27.5 Nominal diameter mm Please read Important notes and Cautions and warnings. 8 11/07 Taping, packaging and lead configuration For leaded varistors 3.4 Crimp style S9, lock-in crimps (for lead spacing = 5 mm) These crimp styles provide automatic lock-in function on the printed circuit board for simplified assembly. 3.10.5 Layout recommendation o1.00.02 1) a*) e 1) Seating plane to IEC 60717 VAR0413-V 5.00.2 mm Figure 6 *) Set-off "a" depending on voltage ratings VAR0421-M-E Recommended PCB thickness: 1.5 +0.2 mm Example: SIOV-S07K275S9 3.5 Crimp style S11, lock-in crimps (for lead spacing = 7.5 mm) Layout recommendation 1) e 7.5 nom. VAR0414-D 1) Seating plane to IEC 60717 VAR0429-Y Recommended PCB thickness: 1.6 0.14 mm Figure 7 Copper _0 1.20 +0.10 1.350.05 0.40.15 1.600.14 1.500.10 VAR0549-S Recommended hole pattern Example: SIOV-S14K275S11 Please read Important notes and Cautions and warnings. 9 11/07 Taping, packaging and lead configuration For leaded varistors 3.6 Trimmed leads Varistors with cut leads available upon request. Lead length tolerances: 3 max. Straight leads Crimped leads Minimum lead length +/-1.0 mm +/-0.8 mm +/-3.5 mm 1) e 1) Seating plane to IEC 60717 VAR0642-U-E Figure 8 Please read Important notes and Cautions and warnings. 10 11/07 Taping, packaging and lead configuration For leaded varistors Overview of standard varistors Ordering code Crimp style Taping mode Pieces/reel I Nominal disk diameter 5 mm, straight leads, B72205S0110K111 S05K11G B72205S0140K111 S05K14G B72205S0170K111 S05K17G B72205S0200K111 S05K20G B72205S0250K111 S05K25G B72205S0300K111 S05K30G B72205S0350K111 S05K35G B72205S0400K111 S05K40G B72205S0500K111 S05K50G B72205S0600K111 S05K60G B72205S0750K111 S05K75G B72205S0950K111 S05K95G B72205S0111K111 S05K115G B72205S0131K111 S05K130G B72205S0141K111 S05K140G B72205S0151K111 S05K150G B72205S0171K111 S05K175G B72205S0231K111 S05K230G B72205S0251K111 S05K250G B72205S0271K111 S05K275G B72205S0301K111 S05K300G = 5 mm - - - - - - - - - - - - - - - - - - - - - G G G G G G G G G G G G G G G G G G G G G 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1000 Nominal disk diameter 5 mm, crimped leads, B72205S0110K211 S05K11GS2 B72205S0140K211 S05K14GS2 B72205S0170K211 S05K17GS2 B72205S0200K211 S05K20GS2 B72205S0250K211 S05K25GS2 B72205S0300K211 S05K30GS2 B72205S0350K211 S05K35GS2 B72205S0400K211 S05K40GS2 B72205S0500K211 S05K50GS2 B72205S0600K211 S05K60GS2 B72205S0750K211 S05K75GS2 B72205S0950K211 S05K95GS2 = 5 mm S2 S2 S2 S2 S2 S2 S2 S2 S2 S2 S2 S2 G G G G G G G G G G G G 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 Please read Important notes and Cautions and warnings. Type SIOV- 11 11/07 Taping, packaging and lead configuration For leaded varistors Ordering code Type SIOV- Crimp style Taping mode Pieces/reel I Nominal disk diameter 5 mm, crimped leads, B72205S0111K211 S05K115GS2 B72205S0131K211 S05K130GS2 B72205S0141K211 S05K140GS2 B72205S0151K211 S05K150GS2 B72205S0171K211 S05K175GS2 B72205S0231K311 S05K230GS3 B72205S0251K311 S05K250GS3 B72205S0271K311 S05K275GS3 B72205S0301K311 S05K300GS3 B72205S0381K311 S05K385GS3 B72205S0421K311 S05K420GS3 B72205S0441K311 S05K440GS3 B72205S0461K311 S05K460GS3 = 5 mm (continued) S2 G S2 G S2 G S2 G S2 G S3 G S3 G S3 G S3 G S3 G S3 G S3 G S3 G 1500 1500 1500 1500 1500 1500 1500 1500 1000 1000 1000 1000 1000 Nominal disk diameter 7 mm, straight leads, B72207S0110K111 S07K11G B72207S0140K111 S07K14G B72207S0170K111 S07K17G B72207S0200K111 S07K20G B72207S0250K111 S07K25G B72207S0300K111 S07K30G B72207S0350K111 S07K35G B72207S0400K111 S07K40G B72207S0500K111 S07K50G B72207S0600K111 S07K60G B72207S0750K111 S07K75G B72207S0950K111 S07K95G B72207S0111K111 S07K115G B72207S0131K111 S07K130G B72207S0141K111 S07K140G B72207S0151K111 S07K150G B72207S0171K111 S07K175G B72207S0231K111 S07K230G B72207S0251K111 S07K250G B72207S0271K111 S07K275G B72207S0301K111 S07K300G = 5 mm - - - - - - - - - - - - - - - - - - - - - 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1000 1000 Please read Important notes and Cautions and warnings. 12 11/07 G G G G G G G G G G G G G G G G G G G G G Taping, packaging and lead configuration For leaded varistors Ordering code Type SIOV- Nominal disk diameter 7 mm, crimped leads, B72207S0110K211 S07K11GS2 B72207S0140K211 S07K14GS2 B72207S0170K211 S07K17GS2 B72207S0200K211 S07K20GS2 B72207S0250K211 S07K25GS2 B72207S0300K211 S07K30GS2 B72207S0350K211 S07K35GS2 B72207S0400K211 S07K40GS2 B72207S0500K211 S07K50GS2 B72207S0600K211 S07K60GS2 B72207S0600S212 S07S60AGS2 B72207S0750K211 S07K75GS2 B72207S0950K211 S07K95GS2 B72207S0950S212 S07S95AGS2 B72207S0111K211 S07K115GS2 B72207S0131K211 S07K130GS2 B72207S0141K211 S07K140GS2 B72207S0151K211 S07K150GS2 B72207S0171K211 S07K175GS2 B72207S0231K311 S07K230GS3 B72207S0251K311 S07K250GS3 B72207S0271K311 S07K275GS3 B72207S0301K311 S07K300GS3 B72207S0381K311 S07K385GS3 B72207S0421K311 S07K420GS3 B72207S0441K311 S07K440GS3 B72207S0461K311 S07K460GS3 Please read Important notes and Cautions and warnings. 13 Crimp style Taping mode Pieces/reel I = 5 mm S2 S2 S2 S2 S2 S2 S2 S2 S2 S2 S2 S2 S2 S2 S2 S2 S2 S2 S2 S3 S3 S3 S3 S3 S3 S3 S3 G G G G G G G G G G G G G G G G G G G G G G G G G G G 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1000 1000 1000 1000 1000 1000 1000 1000 11/07 Taping, packaging and lead configuration For leaded varistors Ordering code Type SIOV- Crimp style Nominal disk diameter 10 mm, straight leads, B72210S0110K151 S10K11G5 B72210S0140K151 S10K14G5 B72210S0170K151 S10K17G5 B72210S0200K151 S10K20G5 B72210S0250K151 S10K25G5 B72210S0300K151 S10K30G5 B72210S0350K151 S10K35G5 B72210S0400K151 S10K40G5 B72210S0500K151 S10K50G5 B72210S0600K151 S10K60G5 B72210S0750K151 S10K75G5 B72210S0950K151 S10K95G5 B72210S0111K151 S10K115G5 B72210S0131K151 S10K130G5 B72210S0141K151 S10K140G5 B72210S0151K151 S10K150G5 B72210S0171K151 S10K175G5 B72210S0231K151 S10K230G5 B72210S0251K151 S10K250G5 B72210S0271K151 S10K275G5 B72210S0301K151 S10K300G5 Nominal disk diameter 10 mm, crimped leads, B72210S0110K551 S10K11G5S5 B72210S0140K551 S10K14G5S5 B72210S0170K551 S10K17G5S5 B72210S0200K551 S10K20G5S5 B72210S0250K551 S10K25G5S5 B72210S0300K551 S10K30G5S5 B72210S0350K551 S10K35G5S5 B72210S0400K551 S10K40G5S5 B72210S0500K551 S10K50G5S5 B72210S0600K551 S10K60G5S5 B72210S0750K551 S10K75G5S5 B72210S0950K551 S10K95G5S5 B72210S0111K551 S10K115G5S5 B72210S0131K551 S10K130G5S5 B72210S0141K551 S10K140G5S5 Please read Important notes and Cautions and warnings. 14 Taping mode Pieces/reel III G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1000 1000 1000 1000 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 = 7.5 mm - - - - - - - - - - - - - - - - - - - - - = 7.5 mm S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 11/07 Taping, packaging and lead configuration For leaded varistors Ordering code Type SIOV- Crimp style Nominal disk diameter 10 mm, crimped leads, B72210S0151K551 S10K150G5S5 B72210S0171K551 S10K175G5S5 B72210S0231K551 S10K230G5S5 B72210S0251K551 S10K250G5S5 B72210S0271K551 S10K275G5S5 B72210S0301K551 S10K300G5S5 Taping mode = 7.5 mm (continued) S5 G5 S5 G5 S5 G5 S5 G5 S5 G5 S5 G5 Pieces/reel III 1500 1500 1000 1000 1000 1000 S10K320 ... 460G.S. upon request Nominal disk diameter 14 mm, straight leads, B72214S0110K151 S14K11G5 B72214S0140K151 S14K14G5 B72214S0170K151 S14K17G5 B72214S0200K151 S14K20G5 B72214S0250K151 S14K25G5 B72214S0300K151 S14K30G5 B72214S0350K151 S14K35G5 B72214S0400K151 S14K40G5 B72214S0500K151 S14K50G5 B72214S0600K151 S14K60G5 B72214S0750K151 S14K75G5 B72214S0950K151 S14K95G5 B72214S0111K151 S14K115G5 B72214S0131K151 S14K130G5 B72214S0141K151 S14K140G5 B72214S0151K151 S14K150G5 B72214S0171K151 S14K175G5 B72214S0231K151 S14K230G5 B72214S0251K151 S14K250G5 B72214S0271K151 S14K275G5 B72214S0301K151 S14K300G5 Please read Important notes and Cautions and warnings. 15 = 7.5 mm - - - - - - - - - - - - - - - - - - - - - 11/07 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1000 1000 1000 1000 Taping, packaging and lead configuration For leaded varistors Ordering code Type SIOV- Crimp style Nominal disk diameter 14 mm, crimped leads, B72214S0110K551 S14K11G5S5 B72214S0140K551 S14K14G5S5 B72214S0170K551 S14K17G5S5 B72214S0200K551 S14K20G5S5 B72214S0250K551 S14K25G5S5 B72214S0300K551 S14K30G5S5 B72214S0350K551 S14K35G5S5 B72214S0400K551 S14K40G5S5 B72214S0500K551 S14K50G5S5 B72214S0600K551 S14K60G5S5 B72214S0750K551 S14K75G5S5 B72214S0950K551 S14K95G5S5 B72214S0111K551 S14K115G5S5 B72214S0131K551 S14K130G5S5 B72214S0141K551 S14K140G5S5 B72214S0151K551 S14K150G5S5 B72214S0171K551 S14K175G5S5 B72214S0231K551 S14K230G5S5 B72214S0251K551 S14K250G5S5 B72214S0271K551 S14K275G5S5 B72214S0301K551 S14K300G5S5 Please read Important notes and Cautions and warnings. 16 Taping mode Pieces/reel III G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 G5 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1000 1000 1000 1000 = 7.5 mm S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 11/07