HMC902LP3E v01.0310 Amplifiers - Low Noise - SMT 7 GaAs pHEMT MMIC LOW NOISE AMPLIFIER, 5 - 10 GHz Typical Applications Features This HMC902LP3E is ideal for: Low Noise Figure: 1.8 dB * Point-to-Point Radios High Gain: 19 dB * Point-to-Multi-Point Radios High P1dB Output Power: 16 dBm * Military & Space Single Supply: +3.5 V @ 80 mA * Test Instrumentation Output IP3: +28 dBm 50 Ohm matched Input/Output 16 Lead 3x3mm SMT Package: 9mm Functional Diagram General Description The HMC902LP3E is a GaAs MMIC Low Noise Amplifier housed in a leadless 3x3 mm plastic surface mount package. The amplifier operates between 5 and 10 GHz, providing 19 dB of small signal gain, 1.8 dB noise figure, and output IP3 of +28 dBm, while requiring only 80 mA from a +3.5V supply. The P1dB output power of +16 dBm enables the LNA to function as a LO driver for balanced, I/Q or image reject mixers. The HMC902LP3E also features I/Os that are DC blocked and internally matched to 50 Ohms, making it ideal for high capacity microwave radios and C-Band VSAT applications. Electrical Specifications, TA = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 80 mA [2] Parameter Min. Frequency Range Gain [1] Typ. Max. 5 - 10 17 Units GHz 19.5 dB Gain Variation over Temperature 0.01 dB / C Noise Figure [1] 1.8 2.2 dB Input Return Loss 12 dB Output Return Loss 15 dB Output Power for 1 dB Compression [1] 16 dBm Saturated Output Power (Psat) [1] 17.5 dBm Output Third Order Intercept (IP3) 28 dBm Supply Current (Idd) (Vdd = 3.5V, set Vgg2 = 0V, Vgg1 = 0V Typ.) 80 110 mA [1] Board loss removed from gain, power and noise figure measurement. [2] Vgg1 = Vgg2 = open for normal, self-biased operation. 7-1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC902LP3E v01.0310 GaAs pHEMT MMIC LOW NOISE AMPLIFIER, 5 - 10 GHz 15 23 S21 S11 S22 -5 -15 +25C +85C -40C 21 19 17 -25 15 3 5 7 9 11 13 4 5 6 FREQUENCY (GHz) 0 -10 -10 -20 +25C +85C -40C -40 9 10 11 -20 +25C +85C -40C -30 -40 -50 -50 4 5 6 7 8 9 10 11 4 5 6 FREQUENCY (GHz) 7 8 9 10 11 9 10 11 FREQUENCY (GHz) Output IP3 vs. Temperature Noise Figure vs. Temperature [1] 35 6 5 30 +25C +85C -40C 4 IP3 (dBm) NOISE FIGURE (dB) 8 Output Return Loss vs. Temperature 0 RETURN LOSS (dB) RETURN LOSS (dB) Input Return Loss vs. Temperature -30 7 FREQUENCY (GHz) Amplifiers - Low Noise - SMT 25 GAIN (dB) RESPONSE (dB) 25 5 7 Gain vs. Temperature [1] Broadband Gain & Return Loss [1] 3 25 +25C +85C -40C 20 2 15 1 10 0 4 5 6 7 8 9 10 11 FREQUENCY (GHz) 4 5 6 7 8 FREQUENCY (GHz) [1] Board loss removed from gain, power and noise figure measurement. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 7-2 HMC902LP3E v01.0310 Psat vs. Temperature [1] 25 25 20 20 Psat (dBm) P1dB (dBm) P1dB vs. Temperature [1] 15 +25C +85C -40C 10 5 15 +25C +85C -40C 10 5 0 0 4 5 6 7 8 9 10 11 4 5 6 FREQUENCY (GHz) 8 9 10 11 0 3 Power Compression @ 7 GHz [1] 24 Pout (dBm), GAIN (dB), PAE (%) 0 +25C +85C -40C -10 -20 -30 -40 -50 -60 4 5 6 7 8 9 10 20 16 12 8 4 0 -4 -21 11 Pout Gain PAE -18 -15 -12 FREQUENCY (GHz) -3 20 6 18 5 16 4 14 3 12 2 10 1 5 0 0 Gain IP3 4 Vdd (V) GAIN (dB), IP3 (dBm) 25 NOISE FIGURE (dB) 8 120 30 100 20 80 15 60 10 40 -0.7 Idd (mA) 7 3.5 -6 Gain, Output IP3 & Idd vs. Gate Voltage @ 7 GHz [2][3] 22 3 -9 INPUT POWER (dBm) Gain, Noise Figure & Power vs. Supply Voltage @ 7 GHz [1] GAIN (dB), P1dB (dBm) 7 FREQUENCY (GHz) Reverse Isolation vs. Temperature ISOLATION (dB) Amplifiers - Low Noise - SMT 7 GaAs pHEMT MMIC LOW NOISE AMPLIFIER, 5 - 10 GHz 20 Idd 0 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0 Vgg1, Vgg2 Gate Volltage (Vdc) [1] Board loss removed from gain, power and noise figure measurement. [2] Board loss removed from gain measurement [3] Data taken at Vdd1 = Vdd2 = 3V 7-3 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC902LP3E v01.0310 GaAs pHEMT MMIC LOW NOISE AMPLIFIER, 5 - 10 GHz Drain Bias Voltage +4.5V RF Input Power +10 dBm Gate Bias Voltage, Vgg1 -0.8V to +0.2V Gate Bias Voltage, Vgg2 -0.8V to +0.2V Channel Temperature 150 C 82 Continuous Pdiss (T = 85 C) (derate 7 mW/C above 85 C) 0.45 W 80 Thermal Resistance (Channel to ground paddle) 143.8 C/W Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C 86 84 78 -30 -27 -24 -21 -18 -15 -12 -9 -6 -3 0 3 INPUT POWER (dBm) ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing Amplifiers - Low Noise - SMT 88 Idd (mA) 7 Absolute Maximum Ratings Current vs. Input Power @ 7 GHz NOTES: 1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED. 2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY. 3. LEAD AND GROUND PADDLE PLATING: 100% MATTE TIN 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 6. PAD BURR LENGTH SHALL BE 0.15mm MAX. PAD BURR HEIGHT SHALL BE 0.05mm MAX. 7. PACKAGE WARP SHALL NOT EXCEED 0.05mm 8. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 9. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN. Package Information Part Number Package Body Material HMC902LP3E RoHS-compliant Low Stress Injection Molded Plastic Package Marking [1] Lead Finish 100% matte Sn [2] 902 XXXX [1] 4-Digit lot number XXXX [2] Max peak reflow temperature of 260 C Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 7-4 HMC902LP3E v01.0310 Amplifiers - Low Noise - SMT 7 7-5 GaAs pHEMT MMIC LOW NOISE AMPLIFIER, 5 - 10 GHz Pin Descriptions Pin Number Function Description 1, 2, 5, 8, 11 - 13, 16 N/C The pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/ DC ground externally. 3 RFIN This pin is AC coupled and matched to 50 Ohms 4, 9 GND Package bottom has exposed metal ground paddle that must be connected to RF/DC ground. 6, 7 Vgg1, Vgg2 Optional gate control for amplifier. If left open, the amplifier will run self-biased at standard current. Negative voltage applied will reduce drain current. External capacitors required, see application circuits herein. 10 RFOUT This pin is AC coupled and matched to 50 Ohms 14, 15 Vdd2, Vdd1 Power supply voltage for the amplifier. See assembly for required external components. Interface Schematic Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC902LP3E v01.0310 GaAs pHEMT MMIC LOW NOISE AMPLIFIER, 5 - 10 GHz 7 Amplifiers - Low Noise - SMT Evaluation PCB List of Material for Evaluation PCB 129787 Item Description J1, J2 SMA Connector J3, J4, J6 - J8 DC Pins C1, C4, C7, C10 100 pF Capacitor, 0402 Pkg. C2, C5, C8, C11 10 KpF Capacitor, 0402 Pkg. C3, C6, C9, C12 4.7 F Capacitor, Tantalum U1 HMC902LP3E Amplifier PCB [2] 128395 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 or Arlon 25FR [1] The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 7-6 HMC902LP3E v00.0210 Application Circuit - Standard (Self-Biased) Operation Amplifiers - Low Noise - SMT 7 GaAs pHEMT MMIC LOW NOISE AMPLIFIER, 5 - 10 GHz Application Circuit - Gate Control, Reduced Current Operation 7-7 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC902LP3E v00.0210 GaAs pHEMT MMIC LOW NOISE AMPLIFIER, 5 - 10 GHz 7 Amplifiers - Low Noise - SMT Notes: Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 7-8 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: HMC902LP3E 129787-HMC902LP3E HMC902LP3ETR