FMBB RAIL 1-Phase Line Filters www.schurter.com/pg06_1 AC Filter 2-Stage, DIN Rail Mounting, Very Broad Band Attenuation Description Characteristics - Chassis: DIN rail mounting - Line filter in standard or industrial version, 2 positions, very high attenuation, broadband - High symmetrical and asymmetrical attenuation in the frequency range from 10kHz up to 30MHz - Protection against interference voltage from the mains Possible interferences generated in the equipment are strongly attenuated - Especially designed for electric switch and control cabinets - Qualified for use in equipment according IEC/EN 60950 Approvals pdf, html, General Product Information, Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Shop, SCHURTER-Stock-Check, DistributorStock-Check, Accessories - VDE Certificate Number: 40030734 - UL File Number: E72928 Weblinks Technical Data Ratings IEC Ratings UL/CSA Leakage Current Dielectric Strength Allowable Operation Temp. Climatic Category Degree of Protection Protection Class Terminal Material: Housing 1 - 10 A @ Ta 40 C / 250 VAC; 50 Hz 1 - 10 A @ Ta 40 C / 125/250 VAC; 60 Hz standard < 0.25 mA (250 V / 50 Hz) 1.7 kVDC between L-N 2.7 kVDC between L/N-PE Test voltage (2 sec) -25 C to 100 C 25/100/21 acc. to IEC 60068-1 IP 20 IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 Bolts and nuts M4, Quick connect terminal for PE Metal Line Filter MTBF Connectors Standard and Industrial Version, IEC 60939, IEC 606011, UL 1283, UL 544, EN 133 200, CSA C22.2 no. 8 Technical Details > 200'000 h acc. to MIL-HB-217 F FMBB RAIL 1-Phase Line Filters www.schurter.com/pg06_1 Dimensions max. 61 (6.5) 4) L 1) N (75) 3) 2) N' 27 max. 48 16 L' max. 102 EN 60715 35x7.5 24.5 11.5 max. 61 1) Line 2) Load 3) Tightening torque 0.6-0.8 Nm, Screw 4mm 4) Quick connect terminal 6.3x0.8mm Diagrams S1 S2 1) 1) 2) 1) Line 2) Load Attenuation Loss Standard version 2) 1) Line 2) Load . . . . . 0.1/100 differential mode ........... 100/0.1 differential mode - - - - differential mode _____ common mode 1 A (S1) 2 A (S1) 6 A (S2) 10 A (S2) 3 A (S1) Connectors 3 A (S2) FMBB RAIL 1-Phase Line Filters www.schurter.com/pg06_1 Industrial Version 4 A (S1) 6 A (S1) Variants Rated Current [A] Filter-Type Leakage Current [mA] 1) L [mH] C1 (X2) [nF] C2 (Y2) [nF] C3 (Y2) [nF] C4 (Y2) [nF] R [M] Diagram Weight [g] Screw clamps [mm2] 2) 1 Standard Version 0.25 2 x 15 100 1.5 1 2 Standard Version 0.25 2 x 10 100 1.5 3 Standard Version 0.25 2x2 100 1.5 3 Industrial Version 0.25 2 x 12 100 4 Industrial Version 1.5 2 x 10 6 Standard Version 0.25 6 Industrial Version 10 Standard Version Order Number 470 1 S1 - 4 5500.2263 1 470 1 S1 - 4 5500.2264 1 100 1 S2 - 4 5500.2268 1.5 1 680 1 S1 - 4 5500.2265 100 10 4.7 680 1 S1 - 4 5500.2266 2 x 0.8 100 1.5 1 100 1 S2 - 4 5500.2269 1.5 2x6 100 10 4.7 680 1 S1 - 4 5500.2267 0.25 2 x 0.4 100 1.5 1 100 1 S2 - 4 5500.2270 1) Leakage current acc. IEC60950 - 5.2.3 - Annex D (situation when neutral is interrupted) 2) Maximum conductor cross section (wire gauge) to be used; a comparative table for AWG and mm values can be found in the general product information www.schurter. com/emc_info 5 Pcs 16.06.2012 Packaging unit The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.