1
1-Phase Line Filters FMBB RAIL
www.schurter.com/pg06_1
Connectors
AC Filter 2-Stage, DIN Rail Mounting, Very Broad Band Attenuation
Description
- Chassis:
DIN rail mounting
- Line filter in standard or industrial version, 2 positions, very high
attenuation, broadband
- High symmetrical and asymmetrical attenuation in the frequency range
from 10kHz up to 30MHz
Approvals
- VDE Certificate Number: 40030734
- UL File Number: E72928
Characteristics
- Protection against interference voltage from the mains
Possible interferences generated in the equipment are strongly attenu-
ated
- Especially designed for electric switch and control cabinets
- Qualified for use in equipment according IEC/EN 60950
Weblinks
pdf, html, General Product Information, Approvals, RoHS, CHINA-RoHS,
Mating Connectors, e-Shop, SCHURTER-Stock-Check, Distributor-
Stock-Check, Accessories
Technical Data
Ratings IEC 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz
Ratings UL/CSA 1 - 10 A @ Ta 40 °C / 125/250 VAC;
60 Hz
Leakage Current standard < 0.25 mA (250 V / 50 Hz)
Dielectric Strength 1.7 kVDC between L-N
2.7 kVDC between L/N-PE
Test voltage (2 sec)
Allowable Operation Temp. -25 °C to 100 °C
Climatic Category 25/100/21 acc. to IEC 60068-1
Degree of Protection IP 20 IEC 60529
Protection Class Suitable for appliances with protection
class 1 acc. to IEC 61140
Terminal Bolts and nuts M4, Quick connect ter-
minal for PE
Material: Housing Metal
Line Filter Standard and Industrial Version, IEC
60939, IEC 60601-1, UL 1283, UL 544,
EN 133 200, CSA C22.2 no. 8
Technical Details
MTBF > 200'000 h acc. to MIL-HB-217 F
2
1-Phase Line Filters
FMBB RAIL
www.schurter.com/pg06_1
Connectors
Dimensions
(6.5)
max. 61
L
1)
N
L N'
'
(75)
max. 102
EN 60715
35x7.5
2)
11.524.5
max. 61
27 16
max. 48
3)
4)
1) Line
2) Load
3) Tightening torque 0.6-0.8 Nm, Screw 4mm²
4) Quick connect terminal 6.3x0.8mm
Diagrams
S1
1)
2)
1) Line
2) Load
S2
1)
2)
1) Line
2) Load
Attenuation Loss . . . . . 0.1/100Ω differential mode ........... 100/0.1Ω differential mode - - - - differential mode _____ common mode
Standard version
1 A (S1) 2 A (S1) 3 A (S1) 3 A (S2)
6 A (S2) 10 A (S2)
3
1-Phase Line Filters FMBB RAIL
www.schurter.com/pg06_1
Connectors
Industrial Version
4 A (S1) 6 A (S1)
Variants
Rated Cur-
rent [A]
Filter-Type Leakage Cur-
rent [mA] 1)
L [mH] C1 (X2)
[nF]
C2 (Y2)
[nF]
C3 (Y2)
[nF]
C4 (Y2)
[nF]
R [MΩ] Diagram Weight
[g]
Screw clamps
[mm2] 2)
Order Number
1 Standard Version 0.25 2 x 15 100 1.5 1 470 1 S1 - 4 5500.2263
2 Standard Version 0.25 2 x 10 100 1.5 1 470 1 S1 - 4 5500.2264
3 Standard Version 0.25 2 x 2 100 1.5 1 100 1 S2 - 4 5500.2268
3 Industrial Version 0.25 2 x 12 100 1.5 1 680 1 S1 - 4 5500.2265
4 Industrial Version 1.5 2 x 10 100 10 4.7 680 1 S1 - 4 5500.2266
6 Standard Version 0.25 2 x 0.8 100 1.5 1 100 1 S2 - 4 5500.2269
6 Industrial Version 1.5 2 x 6 100 10 4.7 680 1 S1 - 4 5500.2267
10 Standard Version 0.25 2 x 0.4 100 1.5 1 100 1 S2 - 4 5500.2270
1) Leakage current acc. IEC60950 - 5.2.3 - Annex D (situation when neutral is interrupted)
2) Maximum conductor cross section (wire gauge) to be used; a comparative table for AWG and mm² values can be found in the general product information www.schurter.
com/emc_info
Packaging unit 5 Pcs
The specifications, descriptions and illustrations indicated in this document are based on
current information. All content is subject to modifications and amendments.
16.06.2012
