DESCRIPTION
The Accutek AK584096 high density memory module is CMOS
DRAM organized in 4 Meg x 8 bit words. The assembly consists of
eight standard 4 Meg x 1 DRAMs in plastic SOJ packages mounted
on the front side of a printed circuit board. The module can be con-
figured as a leadless 30 pad SIM or a leaded 30 pin SIP. The mod-
ule is only 0.800 inch high (same height as a standard 1 Meg
module) making it ideally suited for applications with low height
restrictions.
The operation of the AK584096 is identical to eight 4 Meg x 1
DRAMs. The data input is tied to the data output and brought out
separately for each device, with common RAS, CAS and WE con-
trol. This common I/O feature dictates the use of early-write cycles
to prevent contention of D and Q. Since the Write-Enable (WE) sig-
nal must always go low before CAS in a write cycle, Read-Write and
Read-Modify-Write operation is not possible.
FEATURES
·4,194,304 x 8 bit organization
·Optional 30 Pad leadless SIM (Single In-Line Module) or 30
Pin leaded SIP (Single In-Line Package)
·JEDEC standard pinout
·Each device has common D and Q lines with common RAS,
CAS and WE control
·CAS-before-RAS refresh
·Power
4.40 Watt Max Active (80 nSEC)
3.75 Watt Max Active (100 nSEC)
44 mW Max Standby
·Operating free air temperature 00Cto70
0C
·Upward compatible with AK5816384
·Downward compatible with AK58256 and AK581024
Accutek
Microcircuit
Corporation
AK584096AS / AK584096AG
4,194,304 x 8 Bit CMOS
Dynamic Random Access Memory
130
1
Front View
30-Pin SIM
30-Pin SIP
PIN NOMENCLATURE
DQ1-DQ
8Data In / Data Out
A0-A
10 Address Inputs
CAS Column Address Strobe
RAS Row Address Strobe
WE Write Enable
Vcc 5v Supply
Vss Ground
NC No Connect
MODULE OPTIONS
Leadless SIM: AK584096AS
Leaded SIP: AK584096AG
PIN ASSIGNMENT
PIN # SYMBOL PIN # SYMBOL
1 Vcc 16 DQ5
2 CAS 17 A8
3 DQ1 18 A9
4 A0 19 A10
5 A1 20 DQ6
6 DQ2 21 WE
7 A2 22 Vss
8 A3 23 DQ7
9 Vss 24 NC
10 DQ3 25 DQ8
11 A4 26 NC
12 A5 27 RAS
13 DQ4 28 NC
14 A6 29 NC
15 A7 30 Vcc
FUNCTIONAL DIAGRAM
ORDERING INFORMATION
PART NUMBER CODING INTERPRETATION
Position 12345678
1 Product
AK = Accutek Memory
2 Type
4 = Dynamic RAM
5 = CMOS Dynamic RAM
6 = Static RAM
3 Organization/Word Width
1 = by 1 16 = by 16
4 = by 4 32 = by 32
8 = by 8 36 = by 36
9 = by 9
4 Size/Bits Depth
64 = 64K 4096 = 4 MEG
256 = 256K 8192 = 8 MEG
1024 = 1 MEG 16384 = 16 MEG
5 Package Type
G = Single In-Line Package (SIP)
S = Single In-Line Module (SIM)
D = Dual In-Line Package (DIP)
W = .050 inch Pitch Edge Connect
Z = Zig-Zag In-Line Package (ZIP)
6 Special Designation
P = Page Mode
N = Nibble Mode
K = Static Column Mode
W = Write Per Bit Mode
V = Video Ram
7 Separator
- = Commercial 00Cto+70
0C
M = Military Equivalent Screened
(-550C to +1250C)
I = Industrial Temperature Tested
(-450Cto+85
0C)
X = Burned In
8 Speed (first two significant digits)
DRAMS SRAMS
50 = 50 nS 8 = 8 nS
60 = 60 nS 10 = 10 nS
70 = 70 nS 12 = 12 nS
80 = 80 nS 15 = 15 nS
1
3.525
3.475
3.100
3.090
0.024
0.016
0.325
0.275
0.425
0.375
.100
.060
0.815
0.785
0.815
0.785
0.100
TYP
0.100
TYP
130
0.100
TYP
0.053
0.047
0.200
MAX
ACCUTEK MICROCIRCUIT CORPORATION
BUSINESS CENTER at NEWBURYPORT
2 NEW PASTURE ROAD, SUITE 1
NEWBURYPORT, MA 01950-4054
VOICE: 978-465-6200 FAX: 978-462-3396
Email: sales@accutekmicro.com
Internet: www.accutekmicro.com
Accutek reserves the right to make changes in specifications at any
time and without notice. Accutek does not assume any responsibil-
ity for the use of any circuitry described; no circuit patent licenses
are implied. Preliminary data sheets contain minimum and maxi-
mum limits based upon design objectives, which are subject to
change upon full characterization over the specific operating condi-
tions.
MECHANICAL DIMENSIONS
Inches
The numbers and coding on this page do not include all variations
available but are show as examples of the most widely used variations.
Contact Accutek if other information is required.
EXAMPLES:
AK584096ASP-80
4 Meg x 8, 80 nSEC DRAM 30 pin SIM Configuration, Page Mode
AK584096AGN-70
4 Meg x 8, 70 nSEC Dram 30 pin SIP Configuration, Nibble Mode
