TC www.vishay.com Vishay Dale Through Hole Transformers Converter FEATURES * Designed especially for low-power solid state circuits * Designed for mounting on printed circuit boards * Miniature size for minimum space * High conversion efficiency from DC input to filtered DC output * Compliant to RoHS Directive 2011/65/EU APPLICATIONS Power supply for gas discharge display, battery-operated portable instruments, operational amplifier power supplies MECHANICAL SPECIFICATIONS Coil: Secured to bottom of case with epoxy ELECTRICAL SPECIFICATIONS Terminals: 0.025" [0.635 mm] square, solder plated Transformer Power Rating: 3 W OPERATING TEMPERATURE RANGE Isolation, Primary-Secondary: 500 V, 60 Hz. Operating characteristics may be varied to suit specific applications by appropriate selection of circuit components - 20 C to + 80 C. Intended for use in enclosed commercial and industrial applications STANDARD ELECTRICAL SPECIFICATIONS MODEL INPUT (VDC) TC-10-01B 3.6 TC-10-02B 5 OUTPUT + 7.2 0.2 VDC at 150 MW - 7.2 0.2 VDC at 150 MW 200 10 VDC at 250 MW FREQUENCY REFERENCE (kHz) CIRCUIT EFFECTIVE TEST CIRCUIT SCHEMATIC NUMBER 7.5 50 % 1 1 11 50 % 2 (1) 4 11 60 % 2 2 8 75 % 3 1 11 75 % 4 5 200 10 VDC at 250 MW TC-10-03B 5 + 15 0.4 VDC at 125 MW - 15 0.4 VDC at 125 MW + 15 0.4 VDC at 500 MW TC-10-04B 5 TC-10-05B 5 TC-10-06B 5 + 35 1.0 VDC at 610 MW 11 70 % 4 (1) 5 (1) TC-10-07B 7.5 16.3 0.4 VDC at 330 MW 7 65 % 5 1 TC-10-08B 12 15 0.4 VDC at 1 W 7.5 72 % 3 1 - 15 0.4 VDC at 500 MW + 170 5.1 VDC at 850 MW + 32 1.0 VDC at 510 MW TC-10-09B 12 160 5 VDC at 1.5 W 10 75 % 6 3 TC-10-10B 12 14.2 0.7 VDC at 3 W 10 70 % 5 1 TC-10-11B 12 + 24 0.5 VDC at 2 W 10 80 % 5 1 TC-10-12B 24 11 70 % 4 5 170 5.1 VDC at 850 MW 32 1.0 VDC at 510 MW Note (1) Specifications relate to transformer when operated in applicable test circuit and at specified load power. Revision: 02-Mar-12 Document Number: 34077 1 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TC www.vishay.com Vishay Dale TEST CIRCUITS TEST CIRCUIT NUMBER 1 TEST CIRCUIT NUMBER 2 + 200 V 1 470 7 2N4400 4.7 F 1N4148 (4) + - 2 3 9 5 3.3 F 0.1 F - 1 k 9 + 4 INPUT2 1 k + 7.2 V 3.3 F 1 k 1 k 2N4401 0.1 F 1N4150 (4) 3 6 0.003 F - 15 V + 15 V 470 6 10 F TEST CIRCUIT NUMBER 3 10 F RL RL TEST CIRCUIT NUMBER 4 7 1 7 1 RL 0.22 F 5 - 7.2 V 4 1N4148 10 10 8 2N4401 10 F 8 INPUT 3.9 k 2N4400 1 1N4004 (4) 1N4004 (4) 1N4150 (4) Q (1) 2.2 F RL 2 - + - + INPUT 8 INPUT RS RF 4 1N4150 5 RF 8 RS Q 3 2 1N4150 (4) + 15 V - 15 V 4 F 4 F RL 4 RL 0.47 F RF TEST CIRCUIT NUMBER 5 TEST CIRCUIT NUMBER 6 1 1 D 2N2102 (2) - + - 2 INPUT Q 4 C1 5 9 (3) + 8 1N4004 (4) 2 INPUT 8 RS RL 2.2 k 2N2102 3 RF 10 6 7 RL 5 6 Q 9 3 9 D 0.003 F 0.2 F RL 3 4 9 5 180 6 6 Notes * Omit winding 4, 5, 6 and associated circuit to test TC-10-028. * Omit winding 7, 8 and associated circuit to test TC-10-068. (1) RC network may be required to suppress spurious oscillations. R = 100 , C = 0.001 F. (2) RC network may be required to suppress spurious oscillations. (3) RC network may be required to suppress spurious oscillations. R = 10 , C = 0.004 F. Revision: 02-Mar-12 Document Number: 34077 2 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TC www.vishay.com Vishay Dale SCHEMATICS 1. 1 2. 7 8 Secondary Primary 2 9 Primary 2 3 3. 8 1 1 High Voltage Secondary Primary 2 3 Low Voltage 5 Secondary 3 Feedback 5 9 4 Feedback 5 6 6 6 4. Secondary 4 9 4 8 1 5. 8 Primary 2 7 High Voltage (1) Primary 2 Secondary 8 9 3 9 3 1 4 Low Voltage Secondary Feedback 5 6 10 Note (1) Omit high voltage winding for TC-10-06. DIMENSIONS in inches [millimeters] 0.660 [16.76] 6 0.750 [19.05] Max. Dia. 7 5 4 18 2 8 0.430 [10.92] Max. 3 9 0.130 [3.30] Min. 0.025 [0.635] (1) Sqare Pin 2 10 1 36 2 Typ. 72 2 Bottom View Note (1) Shows typical pin spacing, pin 10 is omitted on all models except -05, -06, -12. PART MARKING - Model - Date code ORDERING INFORMATION TC-10 -01B EB e2 MODEL DASH NUMBER PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER T C 1 MODEL Revision: 02-Mar-12 0 E B PACKAGE CODE 0 1 B INDUCTANCE VALUE Document Number: 34077 3 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000