nsk09_04_3sb3.fm Seite 49 Mittwoch, 20. Marz 2002 8:52 08 Pushbutton Units and Indicator Lights SIGNUM 3SB3, Round and Square Programme Contact blocks and lampholders Selection and ordering data Version Symbols/ LED colour Contact travel contact closed contact open DT Order No. Price } Preferred type 1 unit } 3SB34 00-0B } PG Weight approx. Packs kg Unit 102 0.01 20 3SB34 00-0C 102 0.01 20 } 3SB34 00-0A 102 0.019 10 B 3SB34 00-0H 102 0.016 10 B 3SB34 00-0D 102 0.019 10 B 3SB34 00-0E 102 0.019 10 with screw terminals, for front plate mounting 3 1 NO 1 NO 1 Nsd0092g 2 2 3 4 2,3 NSD00017 1-2 0 1 mm 2 3 4 1,6 Contact blocks with 2 contacts mounting depth 65 mm (incl. device identification label) 31 3-4 1-2 7-8 5-6 42 1 NO leading + 1 NC lagging 75 86 2 NO NSD00038 NSD00033 1 NO + 1 NC Nsd0093g 0 1 mm NSD00034 Contact block with 2 contacts NSD00015 3-4 NSD00007 4 NSD00006 Contact block with one contact mounting depth 50 mm 3 3 4 4 NSD00035 Contact block with 1 contact 0 1 2 3 mm 1,6 2,3 4 NSD00037b 0 1 2 3 mm 1,3 2,2 4 NSD00039 3-4 3-4 0 1 mm 2 3 4 1 1 2 2 NSD00036 2,3 2 NC NSD00040 1-2 1-2 0 1 mm 2 3 4 1,6 Lampholder with integrated LED Lampholder with integrated LED UC 24 V yellow red green blue white B } } B } 3SB34 3SB34 3SB34 3SB34 3SB34 00-1PA 00-1PB 00-1PC 00-1PD 00-1PE 102 102 102 102 102 0.01 10 AC 110 V yellow red green blue white B B B B B 3SB34 3SB34 3SB34 3SB34 3SB34 00-1QA 00-1QB 00-1QC 00-1QD 00-1QE 102 102 102 102 102 0.01 10 AC 230 V yellow red green blue white B } } B } 3SB34 3SB34 3SB34 3SB34 3SB34 00-1RA 00-1RB 00-1RC 00-1RD 00-1RE 102 102 102 102 102 0.01 10 nsd0575g Positive opening to IEC 60 947-5-1, Appendix K, and DIN VDE 0660 Part 200. Siemens NS K * 2002 Only supplied in packings 9/49 nsk09_04_3sb3.fm Seite 50 Mittwoch, 20. Marz 2002 8:52 08 Pushbutton Units and Indicator Lights SIGNUM 3SB3, Round and Square Programme Contact blocks and lampholders Selection and ordering data Version Symbols DT Order No. Price } Preferred type 1 unit } 3SB34 00-1A B PG Weight approx. Packs kg Unit 102 0.013 20 3SB34 00-1D 102 0.018 10 B 3SB34 00-1B 102 0.025 10 B 3SB34 00-1C 102 0.025 10 B 3SB34 00-1F 102 0.025 1 B 3SB34 00-1G 102 0.025 1 B 3SB34 00-1L 102 0.025 1 B 3SB34 00-1H 102 0.025 1 B B B 3SB34 00-3A 3SB34 00-3C 3SB34 00-3F 102 102 102 0.09 B B B 3SB34 00-3M 3SB34 00-3P 3SB34 00-3S 102 102 102 with screw terminals, for front plate mounting Lampholder Lampholders, BA9s mounting depth 50 mm without lamp X1 (L+) X2 (L-) NSD00003 Operational voltage 24 V AC/DC X1 with 24 V incandescent lamp (3SX1 (L+) 344) 1) X2 (L-) NSD00003 Lampholders BA9s Nsd0094g 10 Operational voltage 110/130 V AC X1 with built-in resistor for longer (L+) endurance and 130 V lamp (3SX1 731) 1) Operational voltage AC 230/240 V with built-in voltage reducer and 130 V lamp (3SX1 731) 1) X1 X2 (L-) NSD00041 X2 NSD00042 Lampholders, BA9s with separate lamp test function 2 ) incl. 130 V lamp (3SX1 731) 1) Operational voltage AC 230/240 V X5 X1 X2 NSD00043 for incandescent lamps, max. 2.6 W and for LED lamps, AC/DC UC-LED Operational voltage depending on X5 X1 lamp (L+) X2 (L-) NSD00044 for incandescent lamps, max. X5 2.6 W and for LED lamps, DC X2 Operational voltage depending on (L-) lamp for incandescent lamps, max. 2.6 W, for LED lamps, AC/DC and UC-LED for neon bulbs, AC X5 Operational voltage depending on X1 lamp (L+) Transformer X1 (L+) NSD00045 X2 (L-) NSD00046 Nsd0095g Transformer for snap-on mounting on 3SB34 00-1A lampholder (lampholder not included) Operational voltage (50/60 Hz): 127/24 V 240/24 V 400/24 V 127/6 V 240/6 V 400/6 V X1 X2 NSD00047 1 For example of circuits, see page 9/113. 1) The lamp is included. 9/50 2) The lampholder with separate lamp test function can not be installed in an enclosure. Only supplied in packings Siemens NS K * 2002 nsk09_04_3sb3.fm Seite 51 Mittwoch, 20. Marz 2002 8:52 08 Pushbutton Units and Indicator Lights SIGNUM 3SB3, Round and Square Programme Contact blocks and lampholders Selection and ordering data Version Symbols Contact travel contact closed contact open DT Order No. Price } 1 unit Preferred type PG Weight approx. Packs kg Unit with cage clamp terminal connection, for front plate mounting 3 1 NO 1 1 NC nsd0405g 2 NSD00015 3-4 0 1 mm 2 3 B 3SB34 03-0B 102 0.008 20 B 3SB34 03-0C 102 0.008 20 B 3SB34 03-1A 102 0.011 20 B 3SB34 03-1C 102 0.023 10 4 2,3 NSD00017 NSD00007 4 NSD00006 Contact block with cage Contact block with 1 contact, clamp terminal connection mounting depth 50 mm, grid 30 mm x 30 mm 1-2 0 1 mm 2 3 4 1,6 Lampholder with cage Lampholders clamp terminal connection mounting depth 50 mm, grid 30 mm x 30 mm without lamp X1 (L+) Operational voltage AC 230/240 V, with built-in voltage reducer and 130 V lamp (3SX1 731) 1) X1 X2 - (L-) NSD00003 nsd0576g X2 - NSD00042 with screw or cage clamp terminal connection, for front panel mounting Adapters for pushbutton units Adapters for push- buttons 2) for snap-on fitting of 3 elements - } 3SB39 01-0AB 102 0.001 20 - } 3SB39 01-0AC 102 0.001 10 0.002 20 Nsd0096g Adapters for selector switches, key-operated switches and double pushbuttons - Adapters for selector switches, key-operated switches and double pushbuttons with pressure plates for actuating the central contact block Nsd0097g with solder pins, for use on printed-circuit boards, mounting depth 44 mm Contact blocks with 1 contact 3 1 NO 1 NC 1 Nsd0098g 2 Lampholder w. solder pins Lampholders wedge base W2 x 4.6 d, without lamp X1 (L+) NSD00015 3-4 0 1 mm 2 3 B 3SB34 11-0B 102 B 3SB34 11-0C 102 B 3SB34 11-1A 102 0.002 20 4 2,3 NSD00017 NSD00007 4 NSD00006 Contact block w. solder pins 1-2 0 1 mm 2 3 4 1,6 X2 - (L-) NSD00003 Nsd0099g Thrust pad Nsd0082g PCB holder - Thrust pad for selector switches and key-op. switches for actuating the central contact block (also for contact blocks with base mounting) - B 3SB39 01-0AW 102 0.001 10 - - B 3SB39 01-0AA 102 0.001 10 PCB holder for mounting the command devices with the printedcircuit board (screw supplied) nsd0132g Positive opening to IEC 60 947-5-1, Appendix K, and DIN VDE 0660 Part 200. Siemens NS K * 2002 1) The lamp is included Only supplied in packings 2) Holders also available for pushbutton switches, 9/51 nsk09_04_3sb3.fm Seite 52 Mittwoch, 20. Marz 2002 8:52 08 Pushbutton Units and Indicator Lights SIGNUM 3SB3, Round and Square Programme Laser inscription of actuators and indicator elements Design The actuators of the the pushbuttons, illuminated pushbuttons, mushroom pushbuttons, illuminated mushroom pushbuttons and the lens assemblies of the indicator lights of the round and square range can be inscribed by laser. Also the front ring of selector switches can be inscribed. Order requirements Append the order number of the actuator or the indicator light with "-Z" and the required code (Y10, Y11, Y12, Y13 or Y19): Examples Y10 Y11 Nsd0101g Nsd0102g Y12 Y13 Y19 for lower-/upper-case lettering for all upper-case lettering for all lower-case lettering for graphic symbols with number according to order form Ordering example 3SB31 10-0AA31-Z Y13 Z = 1800 Please observe ordering notes on page 9/53. Insert labels Design Pushbuttons (clear) and illuminated pushbuttons with a flat button can be fitted with insert labels for identification purposes. These labels are made of clear transparent moulded plastic with black lettering and can be mounted in any 90 position. Inscription The insert labels without lettering are suitable for user marking with permanent pen. The inscription (and the special inscription) has capital initial letters. The symbols, also non-catalog, are in accordance with DIN Report 4. Selection and ordering data Inscription Insert labels for pushbuttons (clear) and illuminated pushbuttons (flat) Round programme DT Order No. Insert labels for pushbuttons (clear) and illuminated pushbuttons (flat) Square programme nsd0055g Price 1 unit DT Order No. PG Price 1 unit Unit Without inscription B 3SB19 01-4AS B 3SB39 40-4AA 102 Ein On Aus Off Auf Up Ab Down B B B B B B B B 3SB19 01-4AB 3SB19 01-4EB 3SB19 01-4AC 3SB19 01-4EC 3SB19 01-4AD 3SB19 01-4ED 3SB19 01-4AE 3SB19 01-4EE B B B B B B B B 3SB39 40-4AB 3SB39 40-4EB 3SB39 40-4AC 3SB39 40-4EC 3SB39 40-4AD 3SB39 40-4ED 3SB39 40-4AE 3SB39 40-4EE 102 102 102 102 102 102 102 102 Vor Forward Zuruck Reverse Rechts Right Links Left B B B B B B B B 3SB19 01-4AF 3SB19 01-4EF 3SB19 01-4AG 3SB19 01-4EG 3SB19 01-4AH 3SB19 01-4EH 3SB19 01-4AJ 3SB19 01-4EJ - 3SB39 40-4EF - 3SB39 40-4EG 3SB39 40-4AH - 3SB39 40-4AJ - 102 102 102 102 102 102 102 102 Auf Open Zu Close Schnell Fast Langsam Slow B B B B B B B B 3SB19 01-4AD 3SB19 01-4EP 3SB19 01-4AL 3SB19 01-4EQ 3SB19 01-4AM 3SB19 01-4ER 3SB19 01-4AN 3SB19 01-4ES 3SB39 40-4AD - 3SB39 40-4AL - 3SB39 40-4AM - 3SB39 40-4AN - 102 102 102 102 102 102 102 102 Betrieb Running Storung Fault Einrichten Reset Test Start Halt Stop B B B B B B B B B B 3SB19 01-4AP 3SB19 01-4EV 3SB19 01-4AQ 3SB19 01-4EW 3SB19 01-4AR 3SB19 01-4EM 3SB19 01-4EN 3SB19 01-4EK 3SB19 01-4AK 3SB19 01-4EL - 3SB39 40-4EV 3SB39 40-4AQ 3SB39 40-4EW - 3SB39 40-4EM - 3SB39 40-4EK 3SB39 40-4AK 3SB39 40-4EL 102 102 102 102 102 102 102 102 102 102 9/52 Only supplied in packings B B B B B B B B B B B B B B B Packs Nsd0083g 10 Siemens NS K * 2002 nsk09_04_3sb3.fm Seite 53 Mittwoch, 20. Marz 2002 8:52 08 Pushbutton Units and Indicator Lights SIGNUM 3SB3, Round and Square Programme Insert labels Selection and ordering data Inscription Insert labels for pushbuttons (clear) and illuminated pushbuttons (flat) Round programme DT Order No. Symbol Insert labels for pushbuttons (clear) and illuminated pushbuttons (flat) Square programme nsd0055g Price 1 unit DT Order No. PG Packs Nsd0083g Price 1 unit Unit Significance Consecutive No. to DIN Report 4 nss 00432g Off 15 B 3SB19 01-4MB B 3SB39 40-4MB 102 nss 00433g On 16 B 3SB19 01-4MC B 3SB39 40-4MC 102 - B 3SB19 01-4MD B 3SB39 40-4MD 102 42 B 3SB19 01-4PA B 3SB39 40-4PA 102 10 Motion in direc- 28 tion of arrow B 3SB19 01-4NA B 3SB39 40-4NA 102 10 Increase, plus 40 B 3SB19 01-4NG B 3SB39 40-4NG 102 Decrease, minus 41 B 3SB19 01-4MC B 3SB39 40-4MC 102 C 3SB19 01-4AZ K0Y, K1Y, K2Y, K3Y or K9Y C 3SB39 40-4AZ K0Y, K1Y, K2Y, K3Y or K9Y 102 nss 00434g 10 Equipment symbols nss 00410g Electric motor Motion symbols Insert labels with custom inscription Insert label with choice of inscription Ordering with supplemental code Append the following codes to the order number: For inscription with * Text in upper-/lower-case lettering K0Y * Text in all upper-case lettering K1Y * Text in all lower-case lettering K2Y * Symbols with number to DIN Report 4 K3Y * Text or symbols according to order form K9Y Notes on ordering When ordering, specify the required inscription in plain text in addition to the order number and order code. In the case of special inscriptions in a foreign language, give the exact spelling and specify the language. By default, a letter height of 4 mm (for a single line of text) or 3 mm (for 2 or 3 lines of text) is used for text inscriptions. The typeface used is Univers. Other letter heights and typefaces are possible, but must be specified when ordering. The DIN Report 4 (ISBN 3-410-14528-1) is available from For round insert labels, the maximum possible number of characters per line are: * 10 characters for one line of text, * 8 characters for 2 lines of text, * 6 characters for 3 lines of text, but 10 characters in the middle line. Beuth Verlag GmbH D-10772 Berlin Germany Tel.: +49 30 26012260 Fax: +49 30 26011260. 10 Square insert labels can always contain 10 characters per line. Ordering example You want a label with image No. 1800 to DIN Report 4: 3SB19 01-4AZ K3Y Z = 1800 Abcdefgh Abcdefgh Two-line inscription in Upper-/lower-case lettering Siemens NS K * 2002 abcdef abcdefghij abcdef Three-line inscription in lower-case letters NSAD01124 ABCDEFGHIJ Single-line inscription in capital letters NSAD01121 Inscription examples NSAD01125 nss 00409g NSAD01123 nss 00427g NSAD01122 nss 00418g Inscription according to order form Inscription with No. 19 to DIN Report 4 Only supplied in packings 9/53 nsk09_04_3sb3.fm Seite 54 Mittwoch, 20. Marz 2002 8:52 08 Pushbutton Units and Indicator Lights SIGNUM 3SB3, Round and Square Programme Backing plates Design The backing plates consist of a black moulded plastic holder and an inscription plate (black with white print)1). Adhesive or snap-on mounting. They are not suitable for EMERGENCY-STOP mushroom pushbuttons. Note insert dimensions! Inscription Self-adhesive plates Snap-on plates The inscription (and the special inscription) has capital initial letters. The inscription plates are selfadhesive. There are 2 sizes available for the round and square range: * 30 mm x 45 mm plate holders with 12.5 mm x 27 mm inscription plate. * 30 mm x 60 mm plate holders with 27 mm x 27 mm inscription plate. The following variants are available for the round range: 29.8 mm x 51 mm plate holders with 17.5 mm x 28 mm inscription plate (17.5 mm x 27 mm inscription field). For non-standard inscriptions with words in languages other than German, give the exact spelling and specify the language. Selection and ordering data Self-adhesive inscription plate 1) Inscription 12.5 mm x 27 mm nsd0108g DT Order No. } Preferred type Price 1 unit nsd0109g 27 mm x 27 mm DT Order No. Price 1 unit PG Inscription plate for snap-on mounting1) 17.5 mm x 28 mm DT Order No. } Preferred type Packs nsd0110g Price 1 unit Unit blank } 3SB39 02-1AA B 3SB39 03-1AA } 3SB39 05-1AA 102 Ein On Aus Off Auf Up Ab Down B B B B B B B B 3SB39 02-1AB 3SB39 02-1EB 3SB39 02-1AC 3SB39 02-1EC 3SB39 02-1AD 3SB39 02-1ED 3SB39 02-1AE 3SB39 02-1EE B B B B B 3SB39 03-1AB 3SB39 03-1EB 3SB39 03-1AC 3SB39 03-1EC 3SB39 03-1AD - 3SB39 03-1AE - B 3SB39 05-1AB - 3SB39 05-1AC - 3SB39 05-1AD - 3SB39 05-1AE - 102 102 102 102 102 102 102 102 Vor Forward Zuruck Reverse Rechts Right Links Left B B B B B B B B 3SB39 02-1AF 3SB39 02-1EF 3SB39 02-1AG 3SB39 02-1EG 3SB39 02-1AH 3SB39 02-1EH 3SB39 02-1AJ 3SB39 02-1EJ B - - 3SB39 05-1AG - - - - - 102 102 102 102 102 102 102 102 Auf Open Zu Close B B B B 3SB39 02-1AD 3SB39 02-1EP 3SB39 02-1AL 3SB39 02-1EQ B 3SB39 05-1AD - 3SB39 05-1AL - 102 102 102 102 Betrieb Storung Fault Test Start Halt Stop B B B B B B B 3SB39 02-1AP 3SB39 02-1AQ 3SB39 02-1EW 3SB39 02-1EN 3SB39 02-1EL 3SB39 02-1AK 3SB39 02-1EK B B 3SB39 05-1AP 3SB39 05-1AQ - - 3SB39 05-1EL 3SB39 05-1AK 3SB39 05-1EK 102 102 102 102 102 102 102 10 Stop Start Hand Auto Man Auto B B B 3SB39 02-1BC 3SB39 02-1BA 3SB39 02-1EU B B 3SB39 05-1BC 3SB39 05-1BA - 102 102 102 10 B B B B B B 3SB39 02-1MB 3SB39 02-1MC 3SB39 02-1MF 3SB39 02-1ML 3SB39 02-1NA 3SB39 02-1NJ - - 3SB39 05-1MF - 3SB39 05-1NA 3SB39 05-1NJ 102 102 102 102 102 102 10 102 10 B B B B B B B B B B 3SB39 03-1AF - 3SB39 03-1AG - 3SB39 03-1AH - 3SB39 03-1AJ - B 3SB39 03-1AD - 3SB39 03-1AL - B 3SB39 03-1AP 3SB39 03-1AQ - - 3SB39 03-1EL 3SB39 03-1AK - B B 3SB39 03-1BC 3SB39 03-1BA - B B B B B B 10 10 10 Symbols O I O-I 1 2 B B - - 3SB39 03-1MF - 3SB39 03-1NA - B B B Inscription plates with custom inscription Plate with choice of inscription Max. number of rows Letter height C 3SB39 02-1XZ K0Y, K1Y, K2Y, K3Y or K9Y C for "K9Y", plus per unit 3 4 mm (one line) 3.5 mm (two lines) 3 mm (three lines) 3SB39 03-1XZ K0Y, K1Y, K2Y, K3Y or K9Y C for "K9Y", plus per unit 5 4 mm (one to five lines) 3SB39 05-1XZ K0Y, K1Y, K2Y, K3Y or K9Y for "K9Y", plus per unit 3 4 mm (one or two lines) 3 mm (three lines) 1) The inscription plates from the 3SB1 range (silver with black lettering) can also be used, see page 9/107. 9/54 Only supplied in packings Siemens NS K * 2002 nsk09_04_3sb3.fm Seite 55 Mittwoch, 20. Marz 2002 8:52 08 Pushbutton Units and Indicator Lights SIGNUM 3SB3, Round and Square Programme Backing plates Selection and ordering data Version nsd0103g nsd0104g nsd0105g nsd0106g Plate holder for self-adhesive inscription plate 12.5 mm x 27 mm 27 mm x 27 mm PG Plate holder for snap-on inscription plate 17.5 mm x 28 mm Packs nsd0107g DT Order No. } Preferred type Price 1 unit DT Order No. } Preferred type Price 1 unit DT Order No. Price 1 unit Unit Round program } 3SB39 22-0AV } 3SB39 23-0AV 3SB39 25-0AX 102 10 Square program B 3SB39 42-0AX B 3SB39 43-0AX - 102 10 for potentiometer drive 3SB10 00-7CH07 B 3SB39 22-0AW - - 102 10 Ordering with supplemental code Append the following codes to the order number: For inscription with * Text in upper-/lower-case lettering K0Y * Text in all upper-case lettering K1Y * Text in all lower-case lettering K2Y * Symbols with number to DIN Report 4 K3Y * Text or symbols according to order form K9Y } Ordering example Notes on ordering You want a label with image No. 1800 to DIN Report 4: When ordering, specify the required inscription in plain text in addition to the order number and order code. In the case of special inscriptions with words in a language other than German, give the exact spelling and specify the language. 3SB39 02-1XZ K3Y Z = 1800 By default, the above letter heights are used for text inscriptions. The typeface used is Univers. Other letter heights and typefaces are possible, but must be specified when ordering. Up to 10 characters per line are possible. The DIN Report 4 (ISBN 3-410-14528-1) is available from Beuth Verlag GmbH D-10772 Berlin Tel. +49 30 26012260 Fax: +49 30 26011260. Inscription examples Single-line inscription in capital letters Inscription with No. 35 to DIN Report 4 nsd0582g nsd0585g Two-line inscription in Upper-/lower-case lettering Inscription according to order form nsd0586g nsd0583g Three-line inscription in lower-case letters nsd0584g Siemens NS K * 2002 Only supplied in packings 9/55 nsk09_04_3sb3.fm Seite 56 Mittwoch, 20. Marz 2002 8:52 08 Pushbutton Units and Indicator Lights SIGNUM 3SB3, Round and Square Programme Accessories and spare parts Selection and ordering data Version Colour DT Order No. } Preferred type Button, flat for round illuminated pushbuttons, plastic red yellow green blue white clear B B B B B B 3SB39 3SB39 3SB39 3SB39 3SB39 3SB39 PG Packs Unit 30-0CA2 30-0CA3 30-0CA4 30-0CA5 30-0CA6 30-0CA7 102 102 102 102 102 102 10 Button, flat for square illuminated pushbuttons, plastic red yellow green blue white clear B B B B B B 3SB39 3SB39 3SB39 3SB39 3SB39 3SB39 50-0CA2 50-0CA3 50-0CA4 50-0CA5 50-0CA6 50-0CA7 102 102 102 102 102 102 10 Button, flat for round pushbuttons, metal black red yellow green blue white clear B B B B B B B 3SB39 3SB39 3SB39 3SB39 3SB39 3SB39 3SB39 30-0EA1 30-0EA2 30-0EA3 30-0EA4 30-0EA5 30-0EA6 30-0EA7 102 102 102 102 102 102 102 10 Button, flat for round illuminated pushbuttons, metal red yellow green blue white clear B B B B B B 3SB39 3SB39 3SB39 3SB39 3SB39 3SB39 30-0GA2 30-0GA3 30-0GA4 30-0GA5 30-0GA6 30-0GA7 102 102 102 102 102 102 10 Lenses, smooth for round indicator lights, plastic or metal red yellow green blue white clear B B B B B B 3SB39 3SB39 3SB39 3SB39 3SB39 3SB39 30-6BA2 30-6BA3 30-6BA4 30-6BA5 30-6BA6 30-6BA7 102 102 102 102 102 102 10 Lenses, concentric rings for round indicator lights, plastic or metal red yellow green blue white clear B B B B B B 3SB39 3SB39 3SB39 3SB39 3SB39 3SB39 30-6CA2 30-6CA3 30-6CA4 30-6CA5 30-6CA6 30-6CA7 102 102 102 102 102 102 10 Lenses for square illuminated pushbuttons, plastic red yellow green blue white clear B B B B B B 3SB39 3SB39 3SB39 3SB39 3SB39 3SB39 50-6AA2 50-6AA3 50-6AA4 50-6AA5 50-6AA6 50-6AA7 102 102 102 102 102 102 10 B 3SB39 21-0BC 102 1 for round design, plastic } 3SB39 31-0AA 102 10 for square design, plastic B 3SB39 51-0AA 102 10 for round design, metal } 3SB39 31-0AC 102 10 Earthing screw for holder, metal B 3SB39 21-0BD 102 50 Nsd0116g Nsd0118g nsd0399g nsd0400g nsd0401g nsd0402g Nsd0119g Mounting tool for pushbuttons and lenses, metal Price 1 unit Holder Nsd0120g Nsd0121g nsd0403g 9/56 Only supplied in packings Siemens NS K * 2002 nsk09_04_3sb3.fm Seite 57 Mittwoch, 20. Marz 2002 8:52 08 Pushbutton Units and Indicator Lights SIGNUM 3SB3, Round and Square Programme Accessories and spare parts Selection and ordering data Version Suitable for Colour/ inscription DT Order No. Price PG } Preferred type 1 unit B 3SB39 10-4A 102 Unit 1 Keys for key-operated switches Ronis key-operated switch, flat Nsd0124g Packs SB 30 BKS key-operated switch S1 B 3SY1 066 102 1 CES key-operated switch LSG 1 SSG 10 SSP 9 B } B 3SB19 10-2F 3SY1 054 3SY1 052 102 102 102 1 IKON key-operated switch 360012 K1 O.M.R. key-operated switch 73038 73037 73034 73033 light blue red black yellow B 3SY1 053 102 1 B B B B 3SB19 10-2L 3SB19 10-2M 3SB19 10-2N 3SB19 10-2P 102 102 102 102 1 Protective cap clear, silicone 1 ) degree of protection IP 67 Nsd0126g for round design, plastic flat button raised button selector switch B B B 3SB39 21-0AH 3SB19 02-0AK 3SB39 21-0BA 102 102 102 for square design, plastic flat button B 3SB39 41-0AH 102 for round design, metal flat button raised button selector switch B B B 3SB19 02-0AK 3SB19 02-0AN 3SB39 21-0BA 102 102 102 for round design, plastic flat button raised button B B 3SB39 21-0AJ 3SB39 21-0AM 102 102 for square design, plastic flat button B 3SB39 41-0AJ 102 for round design, metal flat button B 3SB39 21-0AM 102 for round design Mushroom push-pull button, 40 mm B 3SB19 02-2BH 102 Dust cap for use in dusty environments Key-operated switch B 3SB39 21-0BT 102 Yellow backing plate, round, as backing plate for EMERGENCY-STOP, for round version, self-adhesive Bore 23 mm, external diameter 80 mm EMERGENCY-STOP mushroom pushbutton blank NOT-AUS EMERGENCYSTOP ARRET D'URGENCE EMERGENZA } B B 3SB39 21-0AB 3SB39 21-0AC 3SB39 21-0AD 102 102 102 B 3SB39 21-0AG 102 B 3SB39 21-0AN 102 blank NOT-AUS EMERGENCYSTOP B B B 3SB39 41-0AB 3SB39 41-0AC 3SB39 41-0AD 102 102 102 1 for round version, metal 1 aluminized B 3SB19 02-0AQ 102 10 for round design, plastic black } 3SB39 21-0AA 102 10 for square design, plastic black b 3SB39 41-0AA 102 10 Protective cap clear, Elastolan 1 ) degree of protection IP 67 Nsd0127g Protective cap clear, silicone, degree of protection IP 67 Nsd0128g 1 Nsd0634g Nsd0129g external diameter 60 mm Yellow backing plate, round, as backing plate for EMERGENCY-STOP, for square version, self-adhesive External diameter 80 mm, cut-out 26 mm x 26 mm EMERGENCY-STOP mushroom pushbutton 1 Pack. Blanking plugs Nsd0407g 1 1 unit Nsd0122g Nsd0123g 1) Not to be used with plate holder. Siemens NS K * 2002 Only supplied in packings 9/57 nsk09_04_3sb3.fm Seite 58 Mittwoch, 20. Marz 2002 8:52 08 Pushbutton Units and Indicator Lights SIGNUM 3SB3, Round and Square Programme Accessories and spare parts Selection and ordering data Version Suitable for 1 Nsd0130g Protective collar, yellow ) for frontplate mounting, for round design Colour DT Order No. Price PG Weight approx. kg Packs } Preferred type 1 unit Unit * without lock } 3SB39 21-0AK 102 * with lock B 3SB39 21-0AX 102 0.025 1 black B 3SB39 21-0AS 102 1 1 EMERGENCYSTOP mushroom pushbuttons Sun collar for round design Pushbuttons and indicator lights Sealable cap Pushbuttons with flat button Nsd0131g black B 3SB19 02-0AL 102 transparent B 3SB19 02-2AR 102 black B 3SB39 21-0AU 102 10 B 3TX4 210-0H 102 100 3SB39 21-0AE 102 20 B 3SB39 01-0AA 102 10 Hole drilling template for the 30 mm grid, horizontal, for round and square design B 3SB19 02-2BG 102 Hole punch, 26 mm x 26 mm, for square design B 3SB39 41-0AF 102 Pushbuttons with front plate fixing } 3SB39 01-0AB 102 0.001 20 Adapters for selector switches, key- Selector switches, key-operated operated switches and double switches and double pushbuttons pushbuttons with front panel mounting with pressure plates for operation of the central contact block Nsd0097g } 3SB39 01-0AC 102 0.001 10 Selector switches and key-operated B switches for use on PCB or with base mounting 3SB39 01-0AW 102 0.001 10 3SB19 02-2BN 102 0.003 1 Nsd0265g Pushbuttons and indicator lights Single frame for square design of the round version Nsd0125g Device designation Order No. and price per packet Nsd0133g Adaptor as thrust collars for frontplates of thin B consists of a metal disc with adhesive insulating material layer on one side. Mounting hole 30.5 mm, mounting as for 22 mm range nsd0132g Holder for printed-circuit board for mounting the actuation units with the PCB (screw supplied) Nsd0134g Adapters for pushbutton units 2 ) for snap-on mounting of 3 elements Soldering element 0.01 1 1 Nsd0096g Thrust pad for selector switches and key-operated switches with pressure plates for operation of Nsd0082g the central contact block Audible signal transducer for screw connection Nsd0137g Audible signal transducer, BA 9s base, operational voltage DC 24 - 28 V, operational current 25 mA, 0.6 W, min. sound pressure 80 dB/10 cm 1) The protective collar should be used only to protect against inadvertent operation and must be mounted so that easy operation is possible. 9/58 Audible signal device3) B 2) Holders also available for pushbutton switches, mushroom pushbuttons and push-pull buttons. Only supplied in packings 3) Note: With increased IP 65 protection use the audible signal device (complete units) (see page 9/22). Siemens NS K * 2002 nsk09_04_3sb3.fm Seite 59 Mittwoch, 20. Marz 2002 8:52 08 Pushbutton Units and Indicator Lights SIGNUM 3SB3, Round and Square Programme Accessories and spare parts Selection and ordering data Version Suitable for Lamp voltage Colour DT Order No. Price } Preferred type 1 unit PG Weight approx. kg Packs Unit Lamps with screw connection, BA 9s base Incandescent lamps Nsd0135g 1.2 W, max. length 28 mm, max. bulb diameter 10 mm Illuminated push- 4 V buttons and indicator lights B 3SB19 02-0AY 102 0.005 10 2 W, max. length 28 mm, max. bulb diameter 10 mm 6V 12 V 24 V 30 V 48 V 60 V B B } B B B 3SX1 342 3SX1 343 3SX1 344 3SB19 02-2AF 3SB19 02-1AP 3SR94 24 102 102 102 102 102 102 0.005 10 2.6 W, length 28 mm, bulb diameter 10 mm 110 ... 130 V 1) } 3SX1 731 102 0.005 10 B 3SB19 02-2BU 102 0.005 10 red yellow green blue white } B } B } 3SB39 3SB39 3SB39 3SB39 3SB39 01-1CA 01-1BA 01-1DA 01-1PA 01-1QA 102 102 102 102 102 0.003 10 AC 130 V red yellow green blue white B B B B B 3SB39 3SB39 3SB39 3SB39 3SB39 01-1CD 01-1BD 01-1DD 01-1PD 01-1QD 102 102 102 102 102 0.003 10 AC 230 V red yellow green blue white B B B B B 3SB39 3SB39 3SB39 3SB39 3SB39 01-1CF 01-1BF 01-1DF 01-1PF 01-1QF 102 102 102 102 102 0.003 10 red yellow green B B B 3SB19 02-4AJ 3SB19 02-4BJ 3SB19 02-4CJ 102 102 102 0.005 10 red yellow green B B B 3SB19 02-4LC 3SB19 02-4MC 3SB19 02-4NC 102 102 102 0.005 10 clear clear green B B B 3SX1 703 3SX1 701 3SX1 702 102 102 102 0.005 10 } 3SB19 02-2AD 102 0.002 1 B 3SB19 02-1AU 102 0.005 1 B B } B B B 3SB29 3SB29 3SB29 3SB29 3SB29 3SB29 08-1AA 08-1AB 08-1AC 08-1AD 08-1AE 08-1AF 102 102 102 102 102 102 0.003 10 B B B B B 3SB39 3SB39 3SB39 3SB39 3SB29 01-1SB 01-1RB 01-1TB 01-1UB 08-1BD 102 102 102 102 102 0.003 10 } 3SB29 08-2AB 102 0.002 1 Multi-incandescent lamp endurance 25 000 h, high vibration resistance 1.2 W Max. operat. current 50 mA AC/DC Illuminated push- 24 V buttons and indicator lights LEDs, super-bright Max. length 28 mm, bulb diameter 10 mm, max. operational current 15 mA Illuminated push- UC 24 V buttons and indicator lights LEDs Max. length 28 mm, bulb diameter 10 mm Operational current 15 mA Blinking (1.4 Hz) Nsd0136g Illuminated push- DC 22 ... 32 V buttons and indicator lights 29 mA 27 mA 24 mA DC 24 V Glow lamps2) length 28 mm, bulb diameter 10 mm Illuminated push- AC 110 V buttons and indi- AC 220 V cator lights AC 220 V Lamp extractor Lamps with BA 9s bases - Lamp adapter for fitting a wedge base into a BA 9s holder Lamps for use on PCBs, wedge base Incandescent lamps W2 x 4.6 d base, 1.0 W 6V 12 V 24 V 30 V 48 V 60 V LEDs, super-bright W2 x 4.6 d base, operational current 10 mA DC 24 V Nsd0028g Lamp extractor red yellow green white blue Lamps with base W2 x 4.6 d Nsd0029g 1) Also for use for AC 230 V when used with a 3SB34 00-1C voltage reducer. Siemens NS K * 2002 2) Due to the inherent orange colour of glow lamps and their lower luminance level compared to incandescent lamps, it is recommended that they Only supplied in packings should only be used with clear or red lenses and in areas where ambient light levels are not very high. 9/59