Home Contact Us Advanced Search
Products Motherboards Xeon Boards [ X7DWT ]
• Quad -Core Xeon 5400 (Seaburg) 1U Twin
Key Features
1. Dual Intel® 64-bit Xeon® Quad-Core or
Dual-
Core, with 1600 / 1333 / 1066 MHz
FSB
2. Intel® 5400 (Seaburg) Chipset
3. Up to 64GB DDR2 800* / 667 / 533
SDRAM Fully Buffered DIMM (FB-DIMM)
4. Intel® (ESB2/Gilgal) 82563EB
Dual-port Gigabit Ethernet Controller
5. 4x SATA 3.0Gbps Ports via ESB2
Controller
6. 1 (x16) PCI-Express Generation II
7. ATI ES1000 Graphics with
32 MB video memory
8. SIMSO IPMI 2.0 Slot
Links & Resources
Tested Memory List
Motherboard Manual
Update Your BIOS
Download the Latest
Drivers and Utilities
Product SKUs
MBD-X7DWT-B X7DWT (Bulk Pack)
Physical Stats
Form Factor Proprietary
Dimensions 16.4" x 6.5 " (41.66cm x 16.5cm)
Processor/Cache
CPU
Dual 771-pin LGA Sockets
Supports up to Dual Intel® 64-bit
Xeon®processor(s) of the same type
below: Quad-Core Intel ®
Xeon®Processor
5400/5300LV sequence
(Harpertown
/Clovertown
processor)
up to 3.20 GHz
Dual-Core Intel ®
Xeon®Processor
5200/5100LV sequence
(Wolfdale/Woodcrest
processor) up to 3.40
GHz
System Bus 1600 / 1333 / 1066 MHz system bus
System Memory
Memory
Capacity
Eight 240-pin DIMM sockets
Supports up to 64 GB 800* / 667 /
533MHz DDR2 ECC FB-DIMM memory
Dual branch memory bus
Memory must be populated in pairs
Memory Sparing supported
Memory Type 800* / 667 / 533MHz FB-DIMM (Fully
Buffered DIMM) ECC DDR2 SDRAM 72-
bit, 240-pin gold-plated DIMMs
DIMM Sizes 512 MB, 1GB, 2GB, 4GB, 8GB**
Memory
Voltage 1.8 V or 1.5 V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC
memory)
Supports Intel® x4 and x8 Single
Device Data Correction (SDDC)
On-Board Devices
Chipset Intel® 5400 (Seaburg) chipset
ESB2
SATA
Intel ESB2 SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows
only)
RAID 0, 1, 10 support (Linux)
IPMI
Support for Intelligent Platform
Management Interface v.2.0, v.1.5
200-pin IPMI slot (SIMSO(+))
(Optional: AOC-SIMSO(+))
Network
Controllers
2Intel® (ESB2/Gilgal) 82563EB Dual-
Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and
1000BASE-T, RJ45 output
Intel® I/OAT support for fast,
scaleable, and reliable networking
Graphics ATI ES1000 controller with 32 MB of
video memory
Super I/O Winbond 83627HF chip
Clock Generator CK410B
Input / Output
Serial ATA Four Serial ATA ports
LAN 2x RJ45 LAN ports
USB 2x USB rear ports
2x USB internal headers
Total 4 USB 2.0 Compliant
VGA 1x VGA Port
Serial Port 1 Fast UART 16550 serial port
Chassis ( Optimized for X7DWT )
1U SC808T-980
Expansion Slots
PCI-Express 1 (x16) PCI-e Generation II slots
System BIOS
BIOS Type 8Mb Flash EEPROM with Phoenix®
BIOS
BIOS Features
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0/2.0
USB Keyboard support
SMBIOS 2.3
Management
Software
Optional IPMI (Intelligent Platform
Management Interface) 1.5 / 2.0
Super Doctor III
Watch Dog
NMI
Power
Configurations
ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode for AC power
recovery
Internal / External modem remote ring-
on
PC Health Monitoring
CPU
Monitors for CPU Cores,+1.5V, +3.3V,
+5V, ±12V, +3.3V Stdby, +5 Stdby,
VBAT, HT, Memory, Chipset
6-Phase-switching voltage regulator
with auto-sense from 0.8375V-1.60V
FAN
Total of four proprietary fan headers
supporting up to 8 fans
8x fans with tachometer status
monitoring
Status monitor for speed control
Temperature
Monitoring for CPU and chassis
environment
CPU thermal trip support
Thermal Control for 8x fan connectors
PSU I
2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
LED CPU / System Overheat LED
Other Features Chassis intrusion detection
Chassis intrusion header
Operating Environment / Compliance
RoHS
RoHS Compliant 6/6, Pb Free
Environmental
Spec.
Operating Temperature: 10° to 35°C
(50° to 95°F)
Non-operating Temperature: -40° to 70°
C (-40° to 158°F)
Operating Relative Humidity: 8% to 90%
(non-condensing)
Non-operating Relative Humidity: 5 to
95% (non-condensing)
Parts List (Bulk Package)
Part Number Qty Description
X7DWT MBD-X7DWT-B 1 X7DWT Motherboard
Manual(s) MNL-0979 1Motherboard Manual for X7DWT
I/O Cables CBL-0044L 2 2ft. Amphenol, SATA Cable
Driver Disk CDR-X7 1.23 1 Version 1.23 CD or later
Optional Parts List
Part Number Qty Description
Riser Card RSC-R1U-E16R - 1U - SXB2 Slot TO 1x PCI-E (x16) Slot
Note: Items in a Standard Retail Package may differ from items in a Standard Bulk Package.
* For 1600MHz FSB CPUs only
**This memory modules are not tested yet
Terms & Conditions | Privacy | Investor Relations Copyright © 2009 Super Micro Computer, Inc.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
Page Viewed: Thursday, June 11, 2009: @05:35:14
X7DWT
Search
