MINI DRAWER MINI DRAWER Dimensions 2.99" x .790" (75.85 x 20.07 mm) Contact sequencing Multilevel for power and signal : Size #12/16 x 6 contacts Housing polarization Built in I ft 7 Available contacts Size #20 x 16 contacts Housing variations See chart below. Current Up to 35A per size #12 contact Standard Size #12 Solder cup, crimp and PCB tail Special gald-plated contact Size #16 Solder cup, crimp and PCB tail I 1 oe True Hot Plug support size #12 contacts termination Size #20 Solder cup, crimp and PCB tail @ HOUSING VARIATIONS Pin Contact Housing Socket Contact Housing = mates with Position #1 3@Size#H12 16@Size#20 3 @ Size #12 221-0010-01100 Position #1 3@Size#12 16@Size#20 3 @ Size #12 222-0010-01100 mates with Position #1 3@Size#i6 16@Size#20 3 @ Size #16 221-0011-01100 a ay OCs Position #1 3@Size#H16 16@Size#20 3 @ Size #16 222-0011-01100 Position #1 5 3@SizeHH6 16@Size#20 3 @ Size #12 221-0012-01100 C = mates with> ) OLE ee Position #1 3@Size#2 16@Size#20 3 @ Size #16 222-001 2-01100 C7 A) @ GENERAL DIMENSIONS The dimensions given are identical for the three housing variations available for MIN| DRAWER. Units are in inches (mm). Position |, #1 400 (10.16) TW ppm 790 (20.07) Bn 2.746 (69.75 2.99 (75.85) R.20 (5.08) 2 x Guide socket Pin Side BE prawer Series Tj 500 (12.70) 250 (6.35) 240 (010) .020 (0.51) | 999 (53.31) _-|, ~ rc] Position #A 500 (12.70) 250 (6.35) 150 (3.81) 020 (0.51) .395 (10.03) k- .790 (20.07) 5 2.746 (69.75) 2.99 (75.85) |___ 2.180 (55.37) __-| ( oF R.20 (5.08) 2 x Guide pin Socket Side