Top View White LED
HT-T5301 Series
Official Product
Data Sheet No.
Tentative Product
HT-T5301 Series
Specifications are subject to change without notice. Data and
drawings herein are copyrighted.
June 25, 2013
Version of 1.0
Page 1/21
Harvatek Surface Mount Chip LED Data Sheet
HT-T5301 Series
Top View White LED
HT-T5301 Series
Official Product
Data Sheet No.
Tentative Product
HT-T5301 Series
Specifications are subject to change without notice. Data and
drawings herein are copyrighted.
June 25, 2013
Version of 1.0
Page 2/21
DISCLAIMER ............................................................................................................................ 3!
PRODUCT SPECIFICATIONS ................................................................................................. 4!
ATTENTION: ELECTROSTATIC DISCHARGE (ESD) PROTECTION ............................................... 4!
LABEL SPECIFICATIONS ....................................................................................................... 5!
COLOR TEMPERATURE COORDINATES ............................................................................. 9!
PRODUCT CHARACTERISTICS ........................................................................................... 10!
ABSOLUTE MAXIMUM RATINGS ............................................................................................... 10!
ELECTRO-OPTICAL CHARACTERISTICS .................................................................................... 10!
PACKAGE OUTLINE DIMENSION ............................................................................................... 11!
RECOMMENDED SOLDERING PATTERN FOR REFLOW SOLDERING .............................................. 11!
CHARACTERISTIC CURVES FOR TW @60MA ........................................................................... 13!
CHARACTERISTIC CURVES FOR TW @150MA ......................................................................... 14!
PACKAGING .......................................................................................................................... 15!
TAPE DIMENSION ................................................................................................................... 15!
REEL DIMENSION ................................................................................................................... 16!
PACKING ............................................................................................................................... 16!
CLEANING ............................................................................................................................. 20!
REVISION HISTORY .............................................................................................................. 21!
Top View White LED
HT-T5301 Series
Official Product
Data Sheet No.
Tentative Product
HT-T5301 Series
Specifications are subject to change without notice. Data and
drawings herein are copyrighted.
June 25, 2013
Version of 1.0
Page 3/21
DISCLAIMER
HARVATEK reserves the right to make changes without further notice to any products herein
to improve reliability, function or design. HARVATEK does not assume any liability arising out
of the application or use of any product or circuit described herein; neither does it convey any
license under its patent rights, nor the rights of others.
LIFE SUPPORT POLICY
HARVATEK’s products are not authorized for use as critical components in life support devices
or systems without the express written approval of the President of HARVATEK or HARVATEK
INTERNATIONAL. As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical
implant into the body, or (b) support or sustain life, and (c) whose failure to perform when
properly used in accordance with instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of the user.
2. A critical component in any component of a life support device or system whose failure to
perform can be reasonably expected to cause the failure of the life support device or system,
or to affect its safety or effectiveness.
Top View White LED
HT-T5301 Series
Official Product
Data Sheet No.
Tentative Product
HT-T5301 Series
Specifications are subject to change without notice. Data and
drawings herein are copyrighted.
June 25, 2013
Version of 1.0
Page 4/21
Product Specifications
Specification
Material
Quantity
Iv
HT-T5301DNC:
16 - 23.5 lm @60mA
42 - 55lm @150mA
HT-T5301DND:
16 - 23.5 lm @60mA
42 - 55lm @150mA
/ Ta=25O C, + 10%
XY
Refer to Page 8-9
Ta=25O C, + 0.01
Vf
3.4V max
@30mA / Ta=25℃, + 0.05 V
Resin
White
PPA
Carrier tape
Per EIA 481-1A specs
Conductive black tape
2000pcs per reel
Reel
Per EIA 481-1A specs
Conductive black
Label
HT standard
Paper
Packing bag
220x240mm
Aluminum laminated bag/ no-zipper
One reel per bag
Carton
HT standard
Paper
Others:
Each immediate box consists of 5 reels. The 5 reels may not necessarily have the same lot number or the same
bin combinations of Iv, λD and Vf. Each reel has a label identifying its specification; the immediate box consists
of a product label as well.
ATTENTION: Electrostatic Discharge (ESD) protection
The symbol to the left denotes that ESD precaution is needed. ESD protection for
GaP and AlGaAs based chips is necessary even though they are relatively safe in
the presence of low static-electric discharge. Parts built with AlInGaP, GaN, or/and
InGaN based chips are STATIC SENSITIVE devices. ESD precaution must be taken during
design and assembly.
If manual work or processing is needed, please ensure the device is adequately protected
from ESD during the process.
Top View White LED
HT-T5301 Series
Official Product
Data Sheet No.
Tentative Product
HT-T5301 Series
Specifications are subject to change without notice. Data and
drawings herein are copyrighted.
June 25, 2013
Version of 1.0
Page 5/21
Label Specifications
Harvatek P/N:
H
T
-
T
53
0
1
X
X
X
-
Y
Y
Y
Y
Lot No.:
Series Name
Emitting Color
Customer Code
HT-T5301
HT: Harvatek
T5301:
5.7 (L) x 3.0 (W) x 0.9 (H) mm
DNC-60: CRI>70 @60mA
DND-60: CRI>80 @60mA
DNC-A2: CRI>70 @150mA
DND-A2: CRI>80 @150mA
YYYY
Customer Product Code
(TBD)
Top View White LED
HT-T5301 Series
Official Product
Data Sheet No.
Tentative Product
HT-T5301 Series
Specifications are subject to change without notice. Data and
drawings herein are copyrighted.
June 25, 2013
Version of 1.0
Page 6/21
â–“ Luminous Intensity (Iv) Bin:
Bin
Luminous Intensity Range (lm)
Minimum
Maximum
MD2
16.9
18.1
NA1
18.1
19.3
NB1
19.3
20.6
NC2
20.6
22.0
ND2
22.0
23.5
@60mA / Ta=25O C, Tolerance: + 10%
Bin
Luminous Intensity Range (lm)
Minimum
Maximum
RB1
42.5
45.3
RC2
45.3
48.4
RD2
48.4
51.7
SA3
51.7
55.21
@150mA / Ta=25O C, Tolerance: + 10%
Top View White LED
HT-T5301 Series
Official Product
Data Sheet No.
Tentative Product
HT-T5301 Series
Specifications are subject to change without notice. Data and
drawings herein are copyrighted.
June 25, 2013
Version of 1.0
Page 7/21
â–“ Forward Voltage (VF) Bin:
@60mA / Ta=25℃, Tolerance: + 0.05 V
@150mA / Ta=25℃, Tolerance: + 0.05 V
Color
Bin Code
Spec. Range
White (TW)
G4
2.7 – 2.8V
H1
2.8 – 2.9V
H2
2.9 – 3.0V
H3
3.0 – 3.1V
H4
3.1 – 3.2V
J1
3.2 – 3.3V
J2
3.3 – 3.4V
Color
Bin Code
Spec. Range
White (TW)
H1
2.8 – 2.9V
H2
2.9 – 3.0V
H3
3.0 – 3.1V
H4
3.1 – 3.2V
J1
3.2 – 3.3V
J2
3.3 – 3.4V
J3
3.4 – 3.5V
Top View White LED
HT-T5301 Series
Official Product
Data Sheet No.
Tentative Product
HT-T5301 Series
Specifications are subject to change without notice. Data and
drawings herein are copyrighted.
June 25, 2013
Version of 1.0
Page 8/21
â–“ Chromaticity Bin (for TW only):
Top View White LED
HT-T5301 Series
Official Product
Data Sheet No.
Tentative Product
HT-T5301 Series
Specifications are subject to change without notice. Data and
drawings herein are copyrighted.
June 25, 2013
Version of 1.0
Page 9/21
Color Temperature Coordinates
Top View White LED
HT-T5301 Series
Official Product
Data Sheet No.
Tentative Product
HT-T5301 Series
Specifications are subject to change without notice. Data and
drawings herein are copyrighted.
June 25, 2013
Version of 1.0
Page 10/21
Product Characteristics
Absolute Maximum Ratings
Product
Emission
Color
Pd (mW)
IF (mA)
IFP* (mA)
Ir (µA) @ VR = 5 V
TOP (oC)
TST (oC)
HT-T5301DNC-60
White
585
60
60
<5
-30oC~+80oC
-40oC~+85oC
HT-T5301DND-60
White
HT-T5301DNC-A2
White
585
150
300
<5
-30oC~+80oC
-40oC~+85oC
HT-T5301DND-A2
White
* Condition for IFP is pulse of 1/10 duty and 0.1msec width
**Remarks: This product should be operated in forward bias. If a reverse voltage is continuously applied to the product,
such operation can cause migration resulting in LED damage.
Electro-Optical Characteristics
(Ta 25 oC)
Product
Emission
Color
IF(mA)
VF(V)
CCT
I*V(lm)
typ
max
Correlated Color
Temperature(K)
Typ
HT-T5301DNC-60
White
60
3.1
3.4
2750 - 7500
20
HT-T5301DND-60
White
60
3.1
3.4
20
HT-T5301DNC-A2
White
150
3.1
3.5
2750 - 7500
47
HT-T5301DND-A2
White
150
3.1
3.5
47
* Per NIST standards
Top View White LED
HT-T5301 Series
Official Product
Data Sheet No.
Tentative Product
HT-T5301 Series
Specifications are subject to change without notice. Data and
drawings herein are copyrighted.
June 25, 2013
Version of 1.0
Page 11/21
Package Outline Dimension
Recommended Soldering Pattern for Reflow Soldering
Unit: mm Tolerance: +/-0.1
Outline Dimension
Solder Pattern
Soldering terminals may shift in the x, y direction.
Unit: mm
Top View White LED
HT-T5301 Series
Official Product
Data Sheet No.
Tentative Product
HT-T5301 Series
Specifications are subject to change without notice. Data and
drawings herein are copyrighted.
June 25, 2013
Version of 1.0
Page 12/21
Precaution for Use
1) The chips should not be used directly in any type of fluid such as water, oil, organic solvent, etc.
2) When the LEDs are illuminating, the maximum ambient temperature should be first considered
before operation.
3) LEDs must be stored in a clean environment. A sealed container with a nitrogen atmosphere is
necessary if the storage period is over 3 months after shipping.
4) The LEDs must be used within seven days after unpacked. Unused products must be repacked
in an anti-electrostatic package, folded to close any opening and then stored in a dry and cool
space.
5) The appearance and specifications of the products may be modified for improvement without
further notice.
6) The LEDs are sensitive to the static electricity and surge. It is strongly recommended to use a
grounded wrist band and anti-electrostatic glove when handling the LEDs. If a voltage over the
absolute maximum rating is applied to LEDs, it will damage LEDs. Damaged LEDs will show
some abnormal characteristics such as remarkable increase of leak current, lower turn-on
voltage and getting unlit at low current.
Top View White LED
HT-T5301 Series
Official Product
Data Sheet No.
Tentative Product
HT-T5301 Series
Specifications are subject to change without notice. Data and
drawings herein are copyrighted.
June 25, 2013
Version of 1.0
Page 13/21
Characteristic Curves for TW @60mA
Top View White LED
HT-T5301 Series
Official Product
Data Sheet No.
Tentative Product
HT-T5301 Series
Specifications are subject to change without notice. Data and
drawings herein are copyrighted.
June 25, 2013
Version of 1.0
Page 14/21
Characteristic Curves for TW @150mA
Top View White LED
HT-T5301 Series
Official Product
Data Sheet No.
Tentative Product
HT-T5301 Series
Specifications are subject to change without notice. Data and
drawings herein are copyrighted.
June 25, 2013
Version of 1.0
Page 15/21
Packaging
Tape Dimension
Top View White LED
HT-T5301 Series
Official Product
Data Sheet No.
Tentative Product
HT-T5301 Series
Specifications are subject to change without notice. Data and
drawings herein are copyrighted.
June 25, 2013
Version of 1.0
Page 16/21
Reel Dimension
Packing
5 boxes per carton is available depending on shipment quantity.
Top View White LED
HT-T5301 Series
Official Product
Data Sheet No.
Tentative Product
HT-T5301 Series
Specifications are subject to change without notice. Data and
drawings herein are copyrighted.
June 25, 2013
Version of 1.0
Page 17/21
Precaution of Application
Designing 1: Soldering pattern
The dimensions of the recommended soldering pattern may not meet every user. Please
confirm and study first before designing the soldering pattern in order to obtain the best
performance of soldering.
Designing 2: Circuit layout
Due to the circuit design is not available, assuming the circuit is in parallel and a resistor that is
put in series in the circuit, it cannot provide an effective current-limiting function to the LEDs
due to each LED had a different inherent resistance. In general, the LEDs usually have a
different inherent resistance. Different inherent resistance will cause different current, the LED
on the different path would be driven at different power, and the result was the LED with a
higher resistance would be dimmer than the other. To solve this situation, a suitable resistor is
put in series with each LED to limit the current disparity through the LED will be very useful.
Designing 3: Max Rating
Any application should refer to the specifications of absolute maximum ratings.
Dry Pack
Any SMD optical device, like this chip LED, is MOISTURE SENSITIVE device. Avoid
absorbing moisture at any time during transportation or storage. Every reel will be packaged in
the moisture barrier anti-static bag (Specific bag material will depend upon customers’
requirement or option). And the bag is well sealed before shipment. By customer’s requirement,
we will put a humidity indicator in each moisture barrier anti-static bag before shipment.
Top View White LED
HT-T5301 Series
Official Product
Data Sheet No.
Tentative Product
HT-T5301 Series
Specifications are subject to change without notice. Data and
drawings herein are copyrighted.
June 25, 2013
Version of 1.0
Page 18/21
The packaging sequence is as follows:
Storage
It’s recommended to store the products in the following conditions: Humidity: 60 %RH Max.
Temperature: 5°C ~30°C (41°F~86°F)
1. Shelf life in sealed bag: 12 month at<40°C and <90%RH. (Base on aluminum laminated
moisture barrier bag.)
2. After the bag is opened, devices that will be subjected to infrared reflow, vapor-phase reflow, or
equivalent processing must be:
2.1 Mounted within 72 hours at factory conditions of≦ 30°C /60% RH, or
2.2 Stored at ≦ 20% RH with zip-lock sealed.
Baking
It’s recommended to bake before soldering once the pack is unsealed open & re-sealed after 72 hours.
The conditions are as followings:
60 ±3°C×(12~24hrs) and < 5% RH, taped reel type
100±3°C×(45min~1hr), bulk type
130±3°C×(15~30min), bulk type
Soldering
Manual soldering (We do not recommend this method strongly.)
Soldering wire: 63/37 Sn/Pb, flux contained.
To prevent cracking, please bake before manual soldering, if the device is subject to moisture.
Temperature at tip of soldering tool: 300°C±5°C Max.(25W)
It’s banned to load any stress on the resin during soldering.
Soldering time: 3±1sec
Top View White LED
HT-T5301 Series
Official Product
Data Sheet No.
Tentative Product
HT-T5301 Series
Specifications are subject to change without notice. Data and
drawings herein are copyrighted.
June 25, 2013
Version of 1.0
Page 19/21
Handling of Silicone Resin LEDs
Handling Indications
During processing, mechanical stress on the surface should be minimized as much as possible.
Sharp objects of all types should not be used to pierce the sealing compound.
Figure 1
In general, LEDs should only be handled from the side. By the way, this also applies to LEDs
without a silicone sealant, since the surface can also become scratched.
Figure 2
When populating boards in SMT production, there are basically no restrictions regarding the
form of the pick and place nozzle, except that mechanical pressure on the surface of the resin
must be prevented.
This is assured by choosing a pick and place nozzle which is large than LEDs reflector area.
Top View White LED
HT-T5301 Series
Official Product
Data Sheet No.
Tentative Product
HT-T5301 Series
Specifications are subject to change without notice. Data and
drawings herein are copyrighted.
June 25, 2013
Version of 1.0
Page 20/21
Reflow Soldering
Recommend soldering paste specifications:
1. Operating temp.: Above 220°C, 60 sec.
2. Peak temp.:260°C Max., 10sec Max.
3. Reflow soldering should not be done more than two times.
4. Never attempt next process until the component is cooled down to room temperature
after reflow.
5. The recommended reflow soldering profile (measured on the surface of the LED
terminal) is as following:
Lead-free Solder Profile
Cleaning
Following are cleaning procedures after soldering:
• An alcohol-based solvent such as isopropyl alcohol (IPA) is recommended.
• Temperature x Time should be 50oC x 30sec. or <30oC x 3min
• Ultra sonic cleaning: < 15W/ bath; bath volume ≤ 1liter
• Curing: 100 OC max, <3min
Cautions of Pick and Place
• Avoid stress on the resin at elevated temperature.
• Avoid rubbing or scraping the resin by any object.
• Electro-static may cause damage to the component. Please ensure that the equipment
is properly grounded. Use of an ionizer fan is recommended.
Top View White LED
HT-T5301 Series
Official Product
Data Sheet No.
Tentative Product
HT-T5301 Series
Specifications are subject to change without notice. Data and
drawings herein are copyrighted.
June 25, 2013
Version of 1.0
Page 21/21
Revision History
Changes since last revision
Page
Version No.
Revision Date
Initial release
1.0
06-25-2013
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Harvatek:
HT-T5301DND-A2-M1003 HT-T5301DND-A2-M1001 HT-T5301DND-A2-M1002