1. Scope of Application
This data sheet is applied to the LED package, model CLL130-0101C1-42GV1J7.
2. Part code
[1] Part Code
[2] Dies in series quantity 1
[3] Dies in parallel quantity 1
[4] Correlated color temperature White
[5] Chromaticity range Vivid
[6] CRI Ra 94typ
<　Features　>
- External Dimensions:
2.0 x 1.6 x 0.75
- Internal Structure: Chip LED Type
-Luminous Flux: 22.6 lm @ 65 mA
-CCT: White (Vivid)
-CRI: Ra 94typ
-Thermal Resistance: 40 C/W
- RoHS Compliant
CITIZEN ELECTRONICS CO.,LTD. JAPAN
1/14
DATA SHEET
Symbol
CITILED
Name
CLL130-0101C1-42GV1J7
[1]
[2]
[3]
[4]
[5]
[6]
Ref.CE-P3778 11/16
3. Outline drawing
4. Performance
(1) Absolute Maximum Rating
*1
*1
*3
*1 Input power and forward current are the values when the LED is used within the range of
the derating curve in this data sheet.
*2 Refer to 3. Outline drawing for Tc measurement point
*3 D.C. Current : Tj = Ts + Rj-s X Pi
*Ts:Solder terminal(Anode) temperature.
Symbol
CITILED
Name
CLL130-0101C1-42GV1J7
CITIZEN ELECTRONICS CO.,LTD. JAPAN
5
V
0.289
W
Mnimum current
IF min
5
mA
Forward Current
IF
85
mA
Input Power
Pi
Parameter
Reverse Voltage
VR
Tj
Junction Temperature
Storage Temperature
Tst
Operating Temperature
Top
Symbol
120
C
C
2/14
-40 ~ +100
C
-30 ~ +85
DATA SHEET
Rating Value
Unit
Unit : mm
Tolerances unless otherwise specified : +/-0.1
Ref.CE-P3778 11/16
4. Performance
(2) Electro-optical Characteristics
Ts=25C
*1　Thermal Resistance : Junction-Solder terminal
(3) Ranking (Condition : IF=65mA, Ts=25C)
*1 The tolerance of measurement at our tester is VF±3% , φv±7%
*For an order, products within the rank listed above will be delivered.
Except designation of a delivery proportion of each rank.
Name
CLL130-0101C1-42GV1J7
22.6
26.0
lm
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Symbol
CITILED
94
-
-
90
40.0
-
C/W
Thermal Resistance
Rj-ｓ　*1
Junction-Solder
-
Luminous Flux
CRI
Φv
IF=65mA
Ra
IF=65mA
3.16
V
Max.
Unit
-
100
μA
19.2
Min.
Typ.
Reverse Current
IR
VR=5V
-
DATA SHEET
3/14
Forward Voltage
Symbol
IF=65mA
2.58
VF
2.87
Parameter
Condition
Ref.CE-P3778 11/16
Chromaticity coordinates ( Condition : IF=65mA, Tc = 25C）
*1 The tolerance of measurement at our tester is Chromaticity(x,y)±0.01
*For an order, products within the rank listed above will be delivered.
Except designation of a delivery proportion of each rank.
CLL130-0101C1-42GV1J7
CITIZEN ELECTRONICS CO.,LTD. JAPAN
DATA SHEET
4/14
Symbol
CITILED
Name
0.335
0.340
0.345
0.350
0.355
0.360
0.365
0.370
0.375
0.350 0.355 0.360 0.365 0.370 0.375 0.380 0.385
y
x
x-y chart-CIE1931
1
2
3
4
5
6
1
3
5
7
2
4
6
8
Ref.CE-P3778 11/16
5. Characteristics
Forward Current vs. Forward Voltage
Forward Current vs. Relative Luminous Flux
Ts=25C Ts=25C
Forward Current vs. Chromaticity Coordinate Solder Temperature vs. Chromaticity Coordinate
Ts=25C IF=65mA
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Symbol
5/14
DATA SHEET
CITILED
Name
CLL130-0101C1-42GV1J7
2.55
2.65
2.75
2.85
2.95
3.05
3.15
020 40 60 80 100
VF [V]
IF [mA]
0%
20%
40%
60%
80%
100%
120%
140%
020 40 60 80 100
Relative Luminous Flux [a.u.]
IF [mA]
-0.025
-0.020
-0.015
-0.010
-0.005
0.000
0.005
0.010
0.015
0.020
0.025
020 40 60 80 100
△x, △y
IF [mA]
Δｘ
Δｙ
-0.025
-0.020
-0.015
-0.010
-0.005
0.000
0.005
0.010
0.015
0.020
0.025
025 50 75 100
△x, △y
Ts [C]
Δｘ
Δｙ
Ref.CE-P3778 11/16
Solder Temperature vs. Forward Voltage Solder Temperature vs. Relative Luminous Flux
IF=65mA IF=65mA
Case Temperature vs. Allowable Forward Current
Directive Characteristic
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Symbol
DATA SHEET
6/14
CITILED
Name
CLL130-0101C1-42GV1J7
2.7
2.8
2.9
3.0
025 50 75 100
VF [V]
Tｓ [C]
0%
20%
40%
60%
80%
100%
120%
025 50 75 100
Relative Luminous Flux [a.u.]
Ts [C]
X direction
Y direction
X
Y
0.0
0.2
0.4
0.6
0.8
1.0
80°
70°
60°
50°
40° 30° 20° 10°
-80°
-70°
-60°
-50°
-20° -30° -40° -10° 0°
80°
70°
60°
50°
40° 30° 20° 10°
-80°
-70°
-60°
-50°
-20° -30° -40° -10° 0°
80°
70°
60°
50°
40° 30° 20° 10°
-80°
-70°
-60°
-50°
-20° -30° -40° -10° 0°
80°
70°
60°
50°
40° 30° 20° 10°
-80°
-70°
-60°
-50°
-20° -30° -40° -10° 0°
0
10
20
30
40
50
60
70
80
90
025 50 75 100
IF [mA]
Ts [C]
Ref.CE-P3778 11/16
6. Reliability
(1) Datails of the tests
(2) Judgement Criteria of Failure for Reliability Test
(Ta=25C)
U defines the upper limit of the specified characteristics. S defines the initial value.
Note : Measurement shall be taken between 2 hours and 24 hours, and the test pieces should be
return to the normal ambient conditions after the completion of each test.
DATA SHEET
>U X 1.1
<S X 0.7
IF=65mA
Forward Voltage
Test Condition
Symbol
Measuring Condition
Judgement Criteria for Failure
High Temperature Storage Test
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Name
CLL130-0101C1-42GV1J7
Symbol
CITILED
100 C × 1000 hours
85 C, 85 %RH for 500 hours
VF
Total Luminous Flux
Φv
7/14
-40 C × 30 minutes – 100 C × 30 minutes, 100 cycle
Thermal Shock Test
IF=65mA
Test Item
Continuous Operation Test
Low Temperature Storage Test
IF=65mA　Ta=25C × 1000 hours
-40 C × 1000 hours
Reverse Current
IR
VF=5V
>　U×2
Measuring Item
Moisture-proof Test
Ref.CE-P3778 11/16
7. Taping Specifications (in accordance with JIS standard)
(1) Shape and Dimensions of Reel
(Unit:mm)
(2) Dimensions of Tape (Unit:mm)
(3) Configuration of Tape
(4) Quantity : 3000pcs/reel
A standard quantity is 3000 pieces/reel and a minimum quantity is 1000 pcs/reel
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Symbol
DATA SHEET
8/14
CITILED
Name
CLL130-0101C1-42GV1J7
Ref.CE-P3778 11/16
8.Soldering
8-1, Lead free soldering
　(1) Following soldering paste is recommended
Melting temperature : 216 ~ 220C.
Composition : Sn 3.5Ag 0.75Cu
　(2) The temperature profile at the top surface of the parts is recommended as shown below.
　(3) It is requested that products should be handled after their temperature has dropped
down to the normal room temperature
8-2 Recommended soldering pattern
Mountability and solderability need to be
optimized with actual conditions such as
amount of solder, reflow temperature
applied in the process.
8-3. Recommended pickup nozzle
Shape : Circular
Dimension
: Diameter more than 1.5mm
8-4. Washing
(1) When washing after soldering is needed, following conditions are requested.
　a) Washing solvent: Pure Water
　b) Temperature, time: 50C or less × 30 seconds max or 30C or less × 3 minutes max.
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Symbol
DATA SHEET
9/14
CITILED
Name
CLL130-0101C1-42GV1J7
Outline
Center
Anode Pad
Cathode Pad
Ref.CE-P3778 11/16
9. Packing Specifications
9-1. Moisture-proof Packing
To prevent moisture absorption during transportation and storage, reels are packed in
aluminum envelopes
9-2. Storage
To prevent moisture absorption, it is strongly recommended that reels (in bulk or
taped) should be stored in the dry box (or the desiccator) with a desiccant as the
appropriate storage place. If not, the following is recommended.
Temperature : 5~30C
Humidity : 60%RH max.
The devices should be mounted as soon as possible after unpacking. If you store the
unpacked reels, please store them in the dry box or seal them into the envelop again.
Moisture Sensitive Level 1. (IPC/JEDEC J-STD-020C)
Storage limitation : Before Unpacked Alminium envelop : 1 year from delivered day.
After Unpacked Alminium envelop : 168H
DATA SHEET
10/14
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Symbol
CITILED
Name
CLL130-0101C1-42GV1J7
A l u m i
n
u m e
n v e l o
p
L a b e l
R e e l
P o l y e s t e r Z i p f a s t e n e r
Ref.CE-P3778 11/16
10．Precautions
CITILED
Symbol
Name
CLL130-0101C1-42GV1J7
CITIZEN ELECTRONICS CO.,LTD. JAPAN
DATA SHEET
11/14
(1) Handling with care for this product
-When assembling the circuit board into the finished products, care must be taken to avoid
the component parts from touching other parts.
-Please avoid the resin area from being pressed, stressed, rubbed, come into contact with sharp metal nail
(e.g. edge of reflector part) because the function, performance and reliability of this product
are negatively impacted.
(2) Countermeasure against static electricity
-Handling of this product needs countermeasures against static electricity
because this is a semiconductor product.
-Please take adequate measures to prevent any static electricity being produced
such as the wearing of a wristband or anti-static gloves when handling this product.
-Every manufacturing facility in regard to the product (plant, equipment, machine, carrier machine
and conveyance unit) should be connected to ground and please avoid the product to be electric-charged.
-After assembling the LEDs into your final product(s), it is recommended to check
whether the assembled LEDs are damaged by static electricity (electrical leak phenomenon) or not.
-It is easy to find static damaged LED dies by a light-on test with the minimum current value.
(3) Thermal Design
-The thermal design to draw heat away from the LED junction is most critical parameter
for an LED illumination system. High operating temperatures at the LED junction adversely affect
the performance of LED’s light output and lifetime. Therefore the LED junction temperature should
not exceed the absolute maximum rating in LED illumination system.
-The LED junction temperature while operation of LED illumination system depends upon
thermal resistance of internal LED package (Rj-c), outer thermal resistances of LED package,
power loss and ambient temperature. Please take both of the thermal design specifications
and ambient temperature conditions into consideration for the setting of driving conditions.
-For more information, please refer to application note "Thermal Management".
(4) Driving Current
-A constant current is recommended as an applying driving current to this product.
In the case of constant voltage driving, please connect current-limiting resistor to each products in series
and control the driving current to keep under the absolute maximum rating forward current value.
-Electrical transient might apply excess voltage, excess current and reverse voltage to the product(s).
They also affect negative impact on the product(s) therefore please make sure that no excess voltage,
excess current and reverse voltage is applied to the product(s)
when the LED driver is turn-on and/or turn-off.
-For more information, please refer to application note "Driving".
Ref.CE-P3778 11/16
10. Precautions (continued)
Symbol
CITILED
DATA SHEET
12/14
Name
CLL130-0101C1-42GV1J7
CITIZEN ELECTRONICS CO.,LTD. JAPAN
(5) Lighting at a minimum current value
-In a case where the minimum current(IF min) is applied to the product,
some of LED dice in the product might look different in their brightness
due to the individual difference of the LED dice, and they are not failed.
(6) Eye Safety
-The International Electrical Commission (IEC) published in 2006 IEC 62471
”2006 Photobiological safety of lamps and lamp systems ” which includes LEDs within its scope.
-When sorting single LEDs according to IEC 62471, almost all white LEDs can be classified
as belonging to either Exempt Group (no hazard) or Risk Group 1 (low risk).
-However, Optical characteristics of LEDs such as radiant flux,
spectrum and light distribution are factors that affect the risk group determination of the LED,
and especially a high-power LED, that emits light containing blue wavelengths,
might have properties equivalent to those of Risk Group 2 (moderate risk).
-Great care should be taken when directly viewing an LED that is driven at high current,
has multiple uses as a module or when focusing the light with optical instruments,
as these actions might greatly increase the hazard to your eyes.
-It is recommended to regard the evaluation of stand-alone LED packages as a reference
and to evaluate your final product.
(7) Usage Condition
-This product is not designed for usage under the following conditions.
If the product might be used under the following conditions, you shall evaluate its effect
and appropriate them. In places where the product might:
-directly and indirectly get wet due to rain and/or at place with the fear.
-be damage by seawater and/or at place with the fear
-be exposed to corrosive gas (such as Cl2, H2S, NH3, SOx, NOx and so on) and/or at place with the fear.
-be exposed to dust, fluid or oil and/or at place with the fear.
-It is requested to avoid applying any stress to the resin portion of this product.
Ref.CE-P3778 11/16
11. Precautions with regard to product use
(1) This document is provided for reference purposes only so that CITIZEN ELECTRONICS'
products are used as intended. CITIZEN ELECTRONICS neither makes warranties or
representations with respect to the accuracy or completeness of the information contained
in this document nor grants any license to any intellectual property rights or any any other
rights of CITIZEN ELECTRONICS or any third party with respect to the information
in this document.
(2) All information included in this document such as product data, diagrams, charts,
is current as of the date this document is issued.
Such information, however, is subject to change without any prior notice.
Before purchasing or using any CITIZEN ELECTRONICS' products listed in this document,
please confirm the latest product information with a CITIZEN ELECTRONICS' sales office,
and formal specifications must be exchanged and signed by both parties prior to mass production.
(3) CITIZEN ELECTRONICS has used reasonable care in compiling the information
included in this document,
but CITIZEN ELECTRONICS assumes no liability whatsoever for any damages incurred as
a result of errors or omissions in the information included in this document.
(4) Absent ａ written signed agreement, except as provided in the relevant terms and conditions of
sale for product, and to the maximum extent allowable by law, CITIZEN ELECTRONICS
assumes no liability whatsoever, including without limitation, indirect, consequential, special,
or incidental damages or loss, including without limitation, loss of profits, loss of opportunities,
business interruption and loss of data, and disclaims any and all express or implied warranties
and conditions related to sale, use of product, or information, including warranties
or conditions of merchantability, fitness for a particular purpose, accuracy of information,
or no infringement.
(5) Though CITIZEN ELECTRONICS works continually to improve products' quality and reliability,
products can malfunction or fail. Customers are responsible for complying with safety standards
and for providing adequate designs and safeguards to minimize risk and avoid situations
in which a malfunction or failure of a product could cause loss of human life,
bodily injury or damage to property, including data loss or corruption.
In addition, customers are also responsible for determining the appropriateness of
use of any information contained in this document such as application cases not only with
evaluating by their own but also by the entire system.
CITIZEN ELECTRONICS assumes no liability for customers' product design or applications.
(6) Please contact CITIZEN ELECTRONICS' sales office if you have any questions regarding
the information contained in this document, or if you have any other inquiries.
CITIZEN Micro HumanTech is a registered trademark of Citizen Holding Co., Japan.
CITILED is a registered trademark of CITIZEN ELECTRONICS CO., LTD. Japan
DATA SHEET
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Symbol
CITILED
Name
CLL130-0101C1-42GV1J7
13/14
Ref.CE-P3778 11/16
12. Delivery Style
This product is delivered with the following combinations (Opposing corner 1:1).
(1) Combinations
※Please be aware that we are unable to specify the delivery combination and ratio.
製品仕様書
14/14
Combination
Chromaticity Rank
a
1
8
b
2
7
c
3
6
d
4
5
Symbol
CITILED
Name
CLL130-0101C1-42GV1J7
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P3778 11/16