Part Number 856815 1650.75 MHz SAW Filter Data Sheet Features For SATCOM applications Usable bandwidth 48.5 MHz Low loss High Attenuation Single-ended operation Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pb-free Pb Package Pin Configuration Surface Mount 3.00 x 3.00 x 1.22 mm Bottom View SMP-12 1 2 3 6 5 4 1.22 NOM. 1.32 MAX. 0.69 3.00 0.75 Pin No. 2 5 1,3,4,6 1.50 3.00 0.75 Description Input Output Case Ground 0.60 Dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2 - 6m Ni plating Subject to change or obsolescence without notice Rev - 06/09 (c) TriQuint Semiconductor Page 1 of 5 Part Number 856815 1650.75 MHz SAW Filter Data Sheet Electrical Specifications (1) Specified Temperature Range: (2) -20 to +85 C Parameter (3) Minimum Typical (4) Maximum Unit - 1650.75 - MHz - 2.5 3.0 dB 35.0 30.5 24.5 45.0 50 50 48 48 - dB dB dB dB - 0.3 1.0 dB 9.0 - 11 50 50 - dB Center Frequency Maximum Insertion Loss 1626.5 - 1675 MHz Absolute Attenuation 0.1 - 1559.0 MHz 1576.5 MHz 1751.0 MHz 2400 - 2500.0 MHz Passband Ripple (5) 1626.5 - 1675 MHz Input/Output Return Loss 1626.5 - 1675 MHz Source Impedance (single-ended) (6) Load Impedance (single-ended) (6) Notes: 1. All specifications are based on the TriQuint test circuit shown below 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Evaluated as peak-to-adjacent valley ripple and does not include amplitude variation due to pass-band roll-off at band edges 6. This is the optimum impedance in order to achieve the performance shown Test Circuit: 2 50 Single-ended Input Subject to change or obsolescence without notice 50 5 50 1,3,4,6 Rev - 06/09 (c) TriQuint Semiconductor 50 Single-ended Output Page 2 of 5 Part Number 856815 1650.75 MHz SAW Filter Data Sheet Typical Performance (at room temperature) Subject to change or obsolescence without notice Rev - 06/09 (c) TriQuint Semiconductor Page 3 of 5 Part Number 856815 1650.75 MHz SAW Filter Data Sheet Matching Schematics Actual matching values may vary due to PCB layout and parasitics 2 50 Single-ended Input 5 50 50 Single-ended Output 50 1,3,4,6 Marking PCB Footprint 3.20 SQ TriQuint logo .96 Marking code EF 1.70 JJJYM 1.27 .81 ID dot .38 Date code The date code consists of: day of the current year (Julian, 3 digits), last digit of the year (1 digit) M = manufacturing site code This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel 12.8 2.7 ID dot TriQuint logo O330 4.0 0.21 2.0 O1.5 A 1.75 5.5 12.0 3.25 O102 O20.2 O13.0 2.0 1.4 Direction of travel 3.25 4.0 A O1.5 Section A-A Dimensions shown are nominal in millimeters Packaging quantity: 5000 units/reel Subject to change or obsolescence without notice Rev - 06/09 (c) TriQuint Semiconductor Page 4 of 5 Part Number 856815 1650.75 MHz SAW Filter Data Sheet Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Input Power Symbol Minimum Maximum T Tstg Pin -20 -40 - +85 +85 +10 Unit o C C dBm o Important Notes Warnings Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure RoHS Compliance This product complies with EU directive 2002/95/EC (RoHS) Pb Solderability Compatible with JESD22-B102, Pb-free process, 260C peak reflow temperature (see soldering profile) Links to Additional Technical Information PCB Layout Tips Qualification Flowchart Soldering Profile RoHS Information S-Parameters Other Technical Information TriQuint's liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any TriQuint component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: info-product@tqs.com Web: www.triquint.com Rev - 06/09 Or contact one of our worldwide Network of sales offices, Representatives or distributors (c) TriQuint Semiconductor Page 5 of 5