T01121 001229 Ground terminal blocks electrically connected to the mounting rail D 4/6.P.T1 M 4/6.4A.P Spacing 6 mm + 0,05 .238" M 6/8.P Spacing 6 mm + 0,05 .238" Spacing 8 mm - 0,05 .315" Compression clamp DIN 1 - 3 2 R 1 Type Part number Type Green-yellow - UL 94 V0 M 4/6.4A.P.V0 Part number Type Part number 0199 220.00 Green-yellow M 6/8.P 0165 114.17 Green-yellow - UL 94 V0 0195 638.23 D 4/6.P.T1 DIN 3 only Terminal block for ground wire, same size as M 4/6.4A terminal block. IEC UL CSA NFC-DIN Characteristics Wire size Compression clamp Solid wire Stranded wire Short circuit current Rated wire size / Gauge Other characteristics 0,2-4 mm 0,22-4 mm 480A/1s 22-10 AWG 22-10 AWG 12 AWG max. 12 AWG max. 4 mm/A4 10 AWG 12 AWG Wire stripping length Recomm. screwdriver Recomm. torque Protection 9,5 mm .37" 4 mm .16" 0,5-0,8 Nm 4.4-7 lb.in Terminal block for ground wire, same size as D 4/6.T... terminal block. IEC UL CSA NFC-DIN 0,2-4 mm 0,22-4 mm 480A/1s 24-10 AWG 24-10 AWG 24-10 AWG 24-10 AWG 4 mm/A4 10 AWG 10 AWG M 6/8.P.V0 0195 114.06 Terminal block for ground wire, same size as M 6/8 terminal block. IEC UL CSA NFC-DIN 0,5-10 mm 0,5-6 mm 720A/1s 24-8 AWG 24-8 AWG 24-8 AWG 24-8 AWG 6 mm/A5 8 AWG 8 AWG Wire stripping length Recomm. screwdriver Recomm. torque Protection Wire stripping length 9,5 mm .37" 4 mm .16" 0,5-0,8 Nm 4.4-7 lb.in IP 20 NEMA 1 12 mm .47" Recomm. screwdriver Recomm. torque Protection 4-5 mm 0,8-1 Nm .16" - .20" 7.1-8.9 lb.in Approvals Accessories 1 Type End sectionyellow Part number Type Part number Type closed block FEM4AP V0 green th. 3 mm 0199 879.01 yellow 2 Separator end section grey On rail : Recomm.screwdriver/Recomm.torque R See markers marking method Ground terminal blocks electrically connected to the mounting rail 4 mm .16" / 0,8 Nm 7.0 lb.in 11 RC65 12 5 M 10/10.P Part number FEM6 th. 2,8 mm 0103 062.21 FEM6 V0 th. 2,8 mm 0199 305.02 SCF6 th. 3 mm 0118 707.03 4 mm .16" / 0,8 Nm 7.0 lb.in 11 12 M 16/12.P Spacing 10 mm - 0,05 .394" M 35/16.P Spacing 12 mm - 0.1 .473" Spacing 16 mm - 0.1 .630" Compression clamp DIN 1 - 3 2 R 1 Type Green-yellow M 10/10.P M 10/10.P.V0 Compression clamp Type 0165 115.10 Green-yellow M 16/12.P 0195 115.07 Terminal block for ground wire, same size as M 10/10 terminal block. IEC UL CSA NFC-DIN Characteristics Wire size Part number Solid wire Stranded wire Short circuit current Rated wire size / Gauge Other characteristics 0,5-16 mm 0,5-10 mm 1200A/1s 10 mm/B6 Wire stripping length 12 mm .47" 22-6 AWG 22-6 AWG 22-6 AWG 22-6 AWG 6 AWG 6 AWG Recomm. screwdriver Recomm. torque Protection 5,5-6 mm 1,2-1,4 Nm .22" - 24" 10.6-12.3 lb.in Part number Type 0165 130.23 M 16/12.P.V0 0195 130.12 Terminal block for ground wire, same size as M 16/12 terminal block. IEC UL CSA NFC-DIN 4-25 mm 4-16 mm 1920A/1s 16 mm/B7 Wire stripping length 14 mm .55" 18-4 AWG 18-4 AWG 18-4 AWG 18-4 AWG 4 AWG 4 AWG Recomm. screwdriver 5,5 mm .22" Recomm. torque Protection 1,2-1,4 Nm 10.6-12.3 lb.in Part number Green-yellow M 35/16.P 0165 111.14 M 35/16.P.V0 0195 111.03 Terminal block for ground wire, same size as M 35/16 terminal block UL CSA IEC NFC-DIN 4-50 mm 4-35 mm 4200A/1s 35 mm/B9 Wire stripping length 17 mm .67" 10-0 AWG 10-0 AWG 10-0 AWG 10-0 AWG 0 AWG 0 AWG Recomm. screwdriver 8 mm .32" Recomm. torque Protection 2,8-3 Nm 24.3-26.1 lb.in Approvals Accessories 1 Type Part number End sectionyellow 2 Separator end section grey On rail : Recomm.screwdriver/Recomm.torque R See markers marking method Type Part number Type SCFM6 12 17 th. 3 mm 0114 825.05 4 mm .16 / 0,8 Nm 7.0 lb.in 26 Part number closed block closed block closed block th. 3 mm SCFM6 0114 825.05 5,5 mm .22" / 1,0 Nm 9.0 lb.in 12 17 26 5,5 mm .22" / 1,0 Nm 9.0 lb.in 13 17 26 79