www.Amprobe.com
Amprobe® Test Tools
Data Sheet
No hassle
warranty
No waiting.
No shipping
charges.
Our commitment to
high-quality products
and customer service
is demonstrated by
our industry exclusive
“No Hassle” warranty.
In the unlikely event
that an Amprobe Test
Tool requires warranty
service, any of our
local dealers are
authorized to replace
it, on the spot.
(note: $500 MSLP limit)
AT-4000 CON Series
Advanced Wire Tracer
Extremely easy to use ■
One universal transmitter - automatically switches to work ■
with either energized or non-energized systems
Receiver not position sensitive - does not need to be rotated
■
in order to provide accurate readings
Precise sensitivity adjustment
■
Traces live wires buried or hidden behind walls ■
Traces energized and non-energized (open, broken) wires ■
Performs tests without having to interrupt power ■
Locates breakers, neutrals, and ground lines ■
Locates & traces wires in ■
walls, floors, conduit,
computer cables, etc.
Pinpoints shorts, ground
■
faults and broken wires
Does not interfere with
■
sensitive electronic
equipment
Battery Booster
■
strengthens signal for
open tracing
Clamp-on attachment injects
■
signal for non-contact operation
No hassle one-year warranty
■
AT-4001 CON Advanced Wire Tracer with Soft Case
AT-4003 CON Advanced Wire Tracer
AT-4004 CON Advanced Wire Tracer
w/Clamp-On Attachment
AT-4005 CON Advanced Wire Tracer w/Clamp-On
Attachment, Battery Booster & Charger
Amprobe’s reputation for out-performing circuit tracers has
just gotten better. These new and improved advanced trac-
ers combine features and functions to make your job easier.
Patent #6,940,289
Amprobe® Test Tools www.Amprobe.com
Data Sheet
General Specifications
Transmitter Operating Voltage: 9-600 VAC
Operating Frequency: 32.786 kHz
Receiver Range Short Mode (in air): 20’ in air from the traced wire under test conditions
Receiver Range Open Mode (in air): 12’ in air from the traced wire under test conditions
Operating Temperature: -18°C to 49°C (0 to 120°F)
Storage temperature: -40° to 66°C (-40° to 150°F)
Case Material: ABS
Case Size: 14x6.7mm) 0.55” x 0.26”)
Weight (AT-4005 CON): 8.20 lbs.
R-4000 CON Receiver
Detectors: Electromagnetic Coil Array pick up for short mode. Electrostatic plate pick up
for open mode.
Sensitivity: Low, Mid, High gain with precise sensitivity adjustment (thumbwheel).
Short Mode performance: Over 20’ in air from the traced wire under test conditions.
Open Mode performance: Over 12’ from the traced wire in air under test conditions.
50HZ, 60HZ, and 400HZ Rejection: 120db
Power Source: 9V alkaline battery
Display: 10 LEDs
Case: Flame retardant ABS
Weight: 0.5 Lb. (113g)
T-4000 Transmitter
Operating voltage: 9-600 volts
Operating frequency: 32.768 KHZ
Duty Cycle: Transmit 2 pulses with a duration of 0.0625S each, every 0.5 seconds
Case: Flame retardant ABS
Display: LCD (Liquid Crystal Display)
Weight: 0.32 LB (143.5g)
Current Output of the Signal: Low Mode: 11 mA average, 30 mA peak
Medium Mode: 12 mA average, 36 mA peak
High Mode: 13 mA average, 63 mA peak
Fuse: Fast acting 250 mA @ 1000V (6X46mm) P/N: FA6X46MM
Signal Output (9V supply): High setting: 0.74 VAC
Medium setting: 0.61 VAC
Low setting: 0.53 VAC
Battery: 9V alkaline- 24V jack will accept battery pack accessory (B2024 or B2025)
A2202 Clamp-on Transmitter Accessory
Operating Frequency: 32.768KHZ as supplied by T-4000
Case Breakdown Voltage: 3000 volts
Maximum Wire size: 2000 MCM or 2” dia. Cable
Battery: None, power is supplied by T-4000 B2024 Battery Pack
T-4000 B2024 Battery Pack
Type: Nickel-Cadmium rechargeable (20 AA cells)
Capacity: 24-Volt, 600 mah
Rechargeable Time: 14 hours
Fuse: internal self-resetting
B2025 Recharger/Converter
Input: 115VAC
Output: 24 VDC @350 mah
AT-4000 CON Series Advanced Wire Tracer
www.Amprobe.com
Data Sheet
AT-4000 CON Series Advanced Wire Tracer
Optional Accessories
ATGC-1 Ground Coil Accessory
MTL-90B, MTL-500,
MTL-501 and TL36A Test Lead Accessories
Included Accessories Model
AT-4001 CON
Model
AT-4003 CON
Model
AT-4004 CON
Model
AT-4005 CON
Carrying Case Soft SV-1000 Hard CC-AT-4000 Hard CC-AT-4000 Hard CC-AT-4000
Receiver R-4000 CON ■ ■ ■ ■
Transmitter T-4000 ■ ■ ■ ■
Carrying Case CC-AT-4000 ■ ■ ■ ■
110V Pigtail - Banana Plug Cord Set C2901 ■ ■ ■ ■
Alligator Clip - Banana Plug Cord Set C902 ■ ■ ■ ■
Ground Test Lead 25-ft. MTL-G ■ ■ ■ ■
Alligator Clip for Ground Lead TL36A ■ ■ ■ ■
Clamp-On Transmitter Accessory A2202 ■ ■
Rechargeable Battery Pack B2024 ■
Battery Pack Recharger B2025 ■
www.Amprobe.comwww.Amprobe.com
Amprobe® Test Tools
Data Sheet
Amprobe® Test Tools
website: www.Amprobe.com
email: info@amprobe.com
Everett, WA 98203
tel: 877-AMPROBE
Amprobe® Test Tools Europe
In den Engematten 14
79286 Glottertal, Germany
Tel.: +49 (0) 7684 8009 - 0
AT-4000 CON Series Advanced Wire Tracer
©2007 Amprobe Test Tools. All rights reserved.
9/2007 3128839 Rev A
