LM3402MMNOPB - TEXAS INSTRUMENTS

http://www.samsungled.com 1/20

Rev :006

Introduction

Features

·13WCOB LED : 17.0 x 17.0 x t 1.5 (mm)

·InGaN/GaN MQW LED with long-time reliability

·Lead (Pd) free product -RoHS compliant

Applications

·Spot /Downlighting

·LED Retrofit Bulbs

·Outdoor illumination

·Other applications

Product Family Data Sheet

LC013B -COB(Chip on Board) LED

SAMSUNG ELECTRONICS

95, Samsung2-Ro, Giheung-Gu,

Yongin-City, Gyeonggi-Do 446-711, KOREA

change without notice. SAMSUNG, is aregistered trademark of SAMSUNG ELECTRONICS.

http://www.samsungled.com 2/20

Contents

1. Absolute Maximum Rating ----------------- 3

2. Characteristics ----------------- 3

3. Binning Structure ----------------- 4

4. Chromaticity Coordinates ----------------- 6

5. Typical Characteristics Graph ----------------- 8

6. Outline Drawing &Dimension ----------------- 10

7. Reliability Test Items and Conditions ----------------- 11

8. Label Structure ----------------- 12

9. Lot Number ----------------- 13

10. Tray Dimension ----------------- 14

11. Aluminum Bag Dimension ----------------- 14

12. Box &Pad Dimension ----------------- 15

13. Packing Structure ----------------- 16

14. Precaution for use ----------------- 18

15. Revision History ----------------- 20

http://www.samsungled.com 3/20

1. Absolute Maximum Rating

1) Operation Forward Current (Ta=25°

C) ..................................................... 660mA

2) LED Junction Temperature (T

J) ............................................................... 150°C

3) Operating Temperature Range (T

opr ) ............................................... -40°C ∼105°C

4) Storage Temperature Range (T

stg ) ................................................. -40°C ∼120°C

5) Power Dissipation (P

D) ................................................................................. 25W

2. Characteristics

1) Electro-Optical characteristics (Ta:25°C)

Item Unit Condition Rank Min Typ Max

Luminous Flux1) lm2) IF=360mA

2700K 1F

13 1300 -1400

14 1400 -1500

15 1500 -1600

16 1600 -1700

3000K 1F

13 1350 -1450

14 1450 -1560

15 1560 -1670

16 1670 -1780

4000K 1F

15 1430 -1540

16 1540 -1660

17 1660 -1780

18 1780 -1900

5000K 1F

15 1430 -1560

16 1560 -1680

17 1680 -1800

18 1800 -1920

Forward Voltage V3) IF=360mA YH 32.5 35.5 38.5

CRI4) IF=360mA -80 - -

Thermal

Resistance (Rth,j-c)℃/W - - 1.6

View Angle ° IF=360mA - - 115° -

Note :

1) Samsung LED tested in pulsed condition. TJ=25°C, pulse width is 10ms at rated test current.

2) Samsung LED has ±7% tolerance of flux measurements.

3) Samsung LED has ±5% tolerance of forward voltage measurements.

4) Samsung LED has ±1 tolerance of CRI measurements.

http://www.samsungled.com 4/20

3. Binning Structure

(Condition :I

F=360mA, Ta:25°

1) VF Binning

CCT Product Code VF

Rank

VF (V)

Min Typ Max

2700K SPHWW1HDNA25YHW31F YH 32.5 35.5 38.5

3000K SPHWW1HDNA25YHV31F YH 32.5 35.5 38.5

4000K SPHWW1HDNA25YHT31F YH 32.5 35.5 38.5

5000K SPHCW1HDNA25YHRT1F YH 32.5 35.5 38.5

2) Color Binning

CCT Product Code Color Rank Chromaticity Bins

2700K SPHWW1HDNA25YHW31F W3 WA

3000K SPHWW1HDNA25YHV31F V3 VA

4000K SPHWW1HDNA25YHT31F T3 TA

5000K SPHCW1HDNA25YHRT1F RT RW, RX, RY, RZ

http://www.samsungled.com 5/20

3) Luminous Flux Binning

CCT Product Code Flux

Rank

Flux

Bin

Range (lm)

Min Typ Max

2700K SPHWW1HDNA25YHW31F 1F

13 1300 -1400

14 1400 -1500

15 1500 -1600

16 1600 -1700

3000K SPHWW1HDNA25YHV31F 1F

13 1350 - 1450

14 1450 - 1560

15 1560 -1670

16 1670 -1780

4000K SPHWW1HDNA25YHT31F 1F

15 1430 - 1540

16 1540 - 1660

17 1660 -1780

18 1780 -1900

5000K SPHCW1HDNA25YHRT1F 1F

15 1430 - 1560

16 1560 - 1680

17 1680 -1800

18 1800 -1920

http://www.samsungled.com 6/20

4. Chromaticity Coordinates

(Condition :I

F= 360 mA, Ta: 25°C)

1) 2700K

Macadam Ellipse

3step (WA)

xyθab

0.4578 0.4101 53.7 0.0081 0.0042

2) 3000K

Macadam Ellipse

3step (VA)

xyθab

0.4338 0.4030 53.22 0.0083 0.0041

http://www.samsungled.com 7/20

3) 4000K

Macadam Ellipse

3step (TA)

xyθab

0.3818 0.3797 53.72 0.0094 0.0040

4) 5000K

Table CIE XCIE Y

0.3376 0.3616

0.3463 0.3687

0.3451 0.3554

0.3371 0.3490

0.3451 0.3554

0.3440 0.3428

0.3366 0.3369

0.3463 0.3687

0.3551 0.3760

0.3533 0.3620

0.3451 0.3554

0.3533 0.3620

0.3515 0.3487

0.3440 0.3428

Note :

1) The Chromaticity Coordinates refers to ANSI C78.377-2008

2) Samsung LED has ±0.005 tolerance of chromaticity(x,y).

http://www.samsungled.com 8/20

5. Typical Characteristics Graph

*These graphs show typical values. (Ta :25°

Relative Luminuous Flux vs. Forward Current Forward Voltage vs. Forward Current

Chromaticity vs. Forward Current Chromaticity vs. Temperature

Forward Voltage vs. Temperature Relative Luminuous Flux vs. Temperature

http://www.samsungled.com 9/20

Relative Spectral Emission

<2700K> <3000K>

<4000K> <5000K>

Radiation Pattern Derating Curve

http://www.samsungled.com 10 / 20

6. Outline Drawing &Dimension

unit :mm

Tolerance :±0.15

+WFsrlqw,

http://www.samsungled.com 11 / 20

7. Reliability Test Items and Conditions

1) Test Items

Test ItemsTest Conditions Test

Hours/Cycles

Room Temperature life

test 25°C, IF=Max 1,000 h

High Temperature humidity

life test 85°C, 85% RH, DC Derating IF=Max 1,000 h

High Temperature life test 105°C, DC Derating IF=Max 1,000 h

Low Temperature life test -40°C, DC 660 mA 1,000 h

High Temperature Storage 120°C 1,000 h

Low Temperature Storage -40°C 1,000 h

Thermal Shock -45°C/15min →125°C/15min

Temperature changes in 5min. 200 cycles

Temperature Cycle

On/Off test

-40 / 85°C, each 20min, 100min transfer

Power On/off each 5min, DC 360 mA 100 cycles

Temperature humidity

Cycle Storage -10°C↔25°C, 95%RH ↔85°C, 95%RH [24h/1Cycle] 100 cycles

ESD(HBM) R1 :10㏁,R2 :1.5㏀,C:100㎊5times

(± 5 ㎸)

ESD(MM) R1 :10㏁,R2 :0㏀,C:200㎊5times

(± 0.5 ㎸)

Vibration

20~80㎐(Displacement:0.06inch, Max 20G)

80~2㎑(Max 20G)

Min. Frequency ↔Max. Frequency 4min transfer

4times

Shock 1500G, 0.5ms, Every 6faces (3axis X2

faces) 5times

Salt Spray 35°C, salt water 5% 8h spray →16h leaving alone 2cycles

2) Criteria for Failure

*U.S.L.:Upper Standard Level L.S.L. : Lower Standard Level

Item Symbol Test Condition

[Ta=25°

Limit

Min.Max.

Forward Voltage VF660 mA L.S.L. ×0.9 U.S.L. ×1.1

Luminous flux lm 660 mA L.S.L. ×0.7 U.S.L. ×1.3

http://www.samsungled.com 12 / 20

8. Label Structure

*Bag &Inner box *Box

[Box Label]

N.B) Denoted rank is the only example.

Rank Code

ⓐⓑ :Forward Voltage (VF)Rank (refer to page. 4)

ⓒⓓ :Chromaticity Coordinate Rank (refer to page. 4)

ⓔⓕ :Luminous Flux (ΦV)Rank (refer to page. 5)

SPHCW1HDNA25YHRT1F YHRT1F 01

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

●◎◇◆□■△△△ /I

▲▲▲ /XXX PCS

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

OEB1906001/40

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

OEB1906002/40

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

OEB1906003/40

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

OEB1906004/40

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

OEB1906005/40

SPHCW1HDNA25YHRT1F YHRT1F 01

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

●◎◇◆□■△△△ /I

▲▲▲ /XXX PCS

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

OEB1906001/40

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

OEB1906011/40

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

OEB1906002/40

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

OEB1906012/40

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

OEB1906003/40

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

OEB1906013/40

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

OEB1906004/40

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

OEB1906005/40

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

OEB1906006/40

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

OEB1906007/40

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

OEB1906008/40

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

OEB1906009/40

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

OEB1906010/40

Rank

Code

Rank

Code

YHRT1F

Lot

number

Tray

number

/Q'ty

http://www.samsungled.com 13 / 20

9. Lot Number

The Lot number is composed of the following characters

●◎◇◆□■△△△ /I

▲▲▲ /xxx PCS

●:Production Site (S:SAMSUNG ELECTRONICS, G:Gosin China,A:Aprosystems)

◎:L(

LED)

◇:Product State (A:Normality, B: Bulk, C:First Production, R:reproduction, S:Sample)

◆:Year (U:2010, V:2011, W:2012, X:2013...)

□:Month (1 ~ 9, A~C)

■:Day (1 ~ 9, A, B~V)

△:S

AMSUNG LED Product number (1 ~ 999)

▲:Tray Number (1 ~ 999)

http://www.samsungled.com 14 / 20

10. Tray Dimension

11. Aluminum Bag Dimension

Silica gel &Humidity Indicator Card in Aluminum Bag

http://www.samsungled.com 15 / 20

12. Box &Pad Dimension

1) Out BOX

2) Inner BOX

3) Pe-foam PAD

http://www.samsungled.com 16 / 20

13. Packing Structure

1-1). Tray Packing (When 5Trays)

Max Amount(pcs)

Tray Al Bag Box

90 450 1800

http://www.samsungled.com 17 / 20

1-2). Tray Packing (When Less than 5Trays)

EX) Module tray 2pcs :Pe-foam(10t) *3

pcs

Module tray 3pcs :Pe-foam(10t) *2

pcs

Module tray 4pcs :Pe-foam(10t) *1

pcs

http://www.samsungled.com 18 / 20

14. Precaution for use

1) Shelf life in sealed bag :12months at <40

°Cand <90%relative humidity(RH)

2) Peak package body temperature :240

°C.

3) After this bag is opened, devices that will be subjected to reflow solder

or other high temperature processes must be :

a. Mounted within 672 hours at factory conditions of equal to or

less than 30°C / 60% RH, or

b. Stored at <10%RH

4) Devices require bake, before mounting, if :

a. Humidity Indicator Card is >65%when read at 23 ± 5°C, or

b. 2a is not met.

5) If baking is required, devices must be baked for 1hours at 60 ± 5°C

Note :If device containers cannot be subjected to high temperature or

shorter bake times are desired, reference IPC /JEDEC J-STD-033

for bake procedure.

6) TheLEDs are sensitive to the static electricity and surge current.

It is recommended to use awrist band or anti-electrostatic glove when handling

the LEDs. If voltage exceeding the absolute maximum rating is applied to LEDs,

it may cause damage or even destruction to LED devices.

Damaged LEDs may show some unusual characteristics such as increase in

leakage current, lowered turn-on voltage, or abnormal lighting of LEDs at low

current.

http://www.samsungled.com 19 / 20

7) Please do not following behavior in resin area.

(Handling, Pressing, Touching, Rubbing, Contacting tweezers, Cleaning)

Butit'sokinhandlingarea.

8) VOCs (volatile organic compounds) may be occurred by adhesives, flux, hardener or

organic additives which is used in luminaires (fixture) and LED silicone bags are

permeable to it. It may lead adiscoloration when LED expose to heat or light.

This phenomenon can give asignificant loss of light emitted(output) from the luminaires

(fixtures).

In order to prevent these problems, we recommend you to know the physical properties

for the materials used in luminaires, It requires to select carefully.

http://www.samsungled.com 20 / 20

Date Revision History Writer

Drawn Approved

2013.10.07 1st Version SH.AN HK.KIM

2013.10.21 2nd Version SH.AN HK.KIM

2013.10.31 3rd Version SH.AN HK.KIM

2014.01.08 4th Version SH.AN MY.SON

2014.02.19 5th Version SH.AN MY.SON

2014.04.28 6th Version SH.AN MY.SON

Revision History

(LC013B)