SMT flyback transformers
EFD series
Series/Type: B82802A
Ordering code:
Date: 2016-04-28
EPCOS AG 2016. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then
change the color to "white". This ensures that the table disappears (invisible) for the customer PDF.
Don't change formatting when entering or pasting text in the table and don't add any cell or line in and to it!
Identification/Classification 1
(header 1 + top left bar):
SMT flyback transformers
Identification/Classification 2
(header 2 + bottom left header bar):
EFD series
Ordering code: (top right header bar)
Series/Type: (bottom right header bar) B82802A
Preliminary data (optional):
Department: EPCOS Ho PD
Date: 2016-04-28
SMT flyback transformers
EFD series B82802A
EPCOS Ho PD 2016-04-28
Please read Cautions and warnings and Page 2 of 7
Important notes at the end of this document.
Construction
EFD type ferrite core
10 gull wing terminals
Features
Low profile SMT package with high through-
put power capability
Industry standard footprints
Compliant with JEDEC J-STD-020D
MSL level 1
RoHS compatible
Custom variations available (on request)
Applications
General purpose isolated DC/DC converters
(up to 55 W)
Power over Ethernet ( PoE/12 W and
PoE +/30 W), Powered Devices(PD) and
Power Sourcing Equipment (PSD)
Marking
Manufacturer, middle block of ordering code ,
date code, pin1 marker
Delivery mode and packing unit
44/56-mm blister tape, 330-mm Ø reel
Packing unit: 300 pcs./ reel (EFD15)
Packing unit: 160 pcs./ reel (EFD20)
Packing unit: 80 pcs./ reel (EFD25)
Dimensional drawing
EFD15
EFD20
EFD25
SMT flyback transformers
EFD series B82802A
EPCOS Ho PD 2016-04-28
Please read Cautions and warnings and Page 3 of 7
Important notes at the end of this document.
Schematic :
Figure 1 Figure 2
Figure 3 Figure 4
Figure 5 Figure 6
SMT flyback transformers
EFD series B82802A
EPCOS Ho PD 2016-04-28
Please read Cautions and warnings and Page 4 of 7
Important notes at the end of this document.
Technical data and measuring conditions
Input voltage Vin 36 V DC … 60 V DC
Test voltage Vtest Measured at 50 Hz, 1 s
Main inductance L 100 kHz, 100 mV, +25 °C
Inductance tolerance ±10% at +25 °C
DC current IDC With IDC bias Ldrop approx. 20%
Operating frequency f 100 kHz
DC resistance Rmax Measured at +25 °C, maximum values (specified per winding)
Solderability ≥99.9 Sn or Sn96.5Ag3.0Cu0.5: +(245± 5) °C, (3±0.3) s
Wetting of soldering area: ≥95% (to IEC 60068-2-58)
Operating temperature range –40 °C … +125 °C
Characteristics and ordering codes
Ordering code Core Schematic L Lstray,max Turns ratio DC resistance Rmax (Ω)
Pri Sec
μH μH Vout1 V
out2 V
out3
B82802A0012A215 EFD15 Fig 1 100 3.0 (1-10):(2-9):(5-4) 1:2.25:6.5 0.03 0.19 0.45 -
B82802A0012A315 EFD15 Fig 2 100 3.0 (1-10):(2-9):(3-8):(5-4) 1:2.5:0.75:7.5 0.05 0.37 0.43 0.03
B82802A0030A220 EFD20 Fig 3 40 1.5 (1-10):(2-9):(5-4) 1:2.25:6.5 0.015 0.04 0.1 -
B82802A0030A320 EFD20 Fig 4 40 1.8 (1-10):(2-9):(3-8):(5-4) 1:2.25:0.75:6.5 0.018 0.04 0.1 0.01
B82802A0055A225 EFD25 Fig 5 22 1.5 (1-10):(2-9):(5,4-7) 1:2.5:7.5 0.0032 0.04 0.034 -
B82802A0055A325 EFD25 Fig 6 22 1.2 (1-10):(2-9):(3-8):(5.4-7)1:2.33:0.66:6.67 0.015 0.04 0.05 0.0033
Ordering code Core Schematic Vtest Power Vout1 V
out2 V
out3
V AC W V/A V/A V/A
B82802A0012A215 EFD15 Fig 1 1000 12 12/0.5 5.0/1.2 -
B82802A0012A315 EFD15 Fig 2 800 12 5.0/0.8 3.3/1.2 12/0.33
B82802A0030A220 EFD20 Fig 3 1000 30 12/1.25 5.0/3.0 -
B82802A0030A320 EFD20 Fig 4 1000 30 5.0/2.0 3.3/3.0 12/0.83
B82802A0055A225 EFD25 Fig 5 1000 55 12/2.3 5.0/5.5 -
B82802A0055A325 EFD25 Fig 6 1000 55 5.0/3.7 3.3/5.5 12/1.5
SMT flyback transformers
EFD series B82802A
EPCOS Ho PD 2016-04-28
Please read Cautions and warnings and Page 5 of 7
Important notes at the end of this document.
Taping and Packing
Item Core Blister tape Reel
W T A0 B0 P K0 K1 F Ø W1 W2
DIM. EFD15 44.0 0.5 16.6 22.3 24.0 8.6 8.1 40.4 330.0 44.0 48.0
(mm) EFD20 44.0 0.6 21.7 26.6 32.0 11.6 10.6 40.4 330.0 44.0 48.0
EFD25 56.0 0.6 26.2 33.0 44.0 14.6 13.8 52.4 330.0 56.0 60.0
Tolerance
±0.3 ±0.05 ±0.1 ±0.1 ±0.1 ±0.1 ±0.1 ±0.1 ±0.5 ±2.0 ±0.15
Blister tape
Reel
SMT flyback transformers
EFD series B82802A
EPCOS Ho PD 2016-04-28
Please read Cautions and warnings and Page 6 of 7
Important notes at the end of this document.
Cautions and warnings
■ Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■ If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation
Washing processes may damage the product due to the possible static or cyclic mechanical
loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts,
which might lead to reduced reliability or lifetime.
■ The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■ Even for customer-specific products, conclusive validation of the component in the circuit can only
be carried out by the customer.
Display of ordering codes for EPCOS products
The ordering code for one and the same EPCOS product can be represented differently in data
sheets, data books, other publications, on the EPCOS website, or in order-related documents such as
shipping notes, order confirmations and product labels. The varying representations of the
ordering codes are due to different processes employed and do not affect the specifications of
the respective products. Detailed information can be found on the Internet under
www.epcos.com/orderingcodes
Page 7 of 7
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for certain areas
of application. These statements are based on our knowledge of typical requirements that are often placed
on our products in the areas of application concerned. We nevertheless expressly point out that such
statements cannot be regarded as binding statements about the suitability of our products for a
particular customer application. As a rule we are either unfamiliar with individual customer applications or
less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent
on the customer to check and decide whether a product with the properties described in the product
specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure before
the end of their usual service life cannot be completely ruled out in the current state of the art, even
if they are operated as specified. In customer applications requiring a very high level of operational safety
and especially in customer applications in which the malfunction or failure of an electronic component could
endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be
ensured by means of suitable design of the customer application or other action taken by the customer (e.g.
installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the
event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this publication
may contain substances subject to restrictions in certain jurisdictions (e.g. because they are
classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet
(www.tdk-electronics.tdk.com/material). Should you have any more detailed questions, please contact our
sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this publication
may change from time to time. The same is true of the corresponding product specifications. Please
check therefore to what extent product descriptions and specifications contained in this publication are still
applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The aforementioned
does not apply in the case of individual agreements deviating from the foregoing for customer-specific
products.
6. Unless otherwise agreed in individual contracts, all orders are subject to our General Terms and
Conditions of Supply.
7. Our manufacturing sites serving the automotive business apply the IATF 16949 standard. The IATF
certifications confirm our compliance with requirements regarding the quality management system in the
automotive industry. Referring to customer requirements and customer specific requirements (“CSR”) TDK
always has and will continue to have the policy of respecting individual agreements. Even if IATF 16949
may appear to support the acceptance of unilateral requirements, we hereby like to emphasize that only
requirements mutually agreed upon can and will be implemented in our Quality Management
System. For clarification purposes we like to point out that obligations from IATF 16949 shall only become
legally binding if individually agreed upon.
8. The trade names EPCOS, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CTVS,
DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MotorCap,
PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine, PQvar, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, ThermoFuse, WindCap are trademarks registered
or pending in Europe and in other countries. Further information will be found on the Internet at www.tdk-
electronics.tdk.com/trademarks.
Release 2018-10
