SPECIFICATION CONTROL DRAWING
Tyco Electronics Corporation
300 Constitution Drive,
Menlo Park, CA. 94025, U.S.A.
Raychem TITLE:
DURASEAL BLADE TERMINAL
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets] DOCUMENT NO.: B-106-4XXX
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Tyco Electronics reserves the right to amend
this drawing at any time. Users should
evaluate the suitability of the product for their
application.
PROD. REV.:
SEE TABLE DOC. ISSUE:
8 DATE: 8-Jul-03
PREPARED BY:
mforonda REPLACES:
D030190 . DCR NUMBER:
D030372 CAGE CODE :
06090 SCALE:
None SIZE:
A SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check the latest revision
Product Revision Product Dimensions Wire Dimensions
øG Product
Name øA
min B
nom C
nom L
max Color (1) Size Range
mm2 (AWG) min max
B-106-4631 B 4.0
(0.155) 6.35
(0.250) 0.8
(0.030) 32.0
(1.260) Red 0.5 - 1.0
(AWG 22-18) 1.4
(0.055) 4.0
(0.155)
B-106-4632 B 4.6
(0.180) 6.35
(0.250) 0.8
(0.030) 33.0
(1.300) Blue 1.5 - 2.5
(AWG 16-14) 2.0
(0.080) 4.6
(0.180)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent color (1), radiation cross-linked modified polyamide with
thermoplastic adhesive coating inside.
2. BLADE TERMINAL: Tin-plated brass.
BASE METAL: C260 Brass.
PLATING: Tin-plated per ASTM B545, Class A.
APPLICATION
1. These controlled crimp devices are designed to terminate a tin-plated or bare copper stranded wire having an insulation rated
for at least 75°C to a blade terminal. It will provide a splash proof and strain relief connection.
UL listed wire connector 3Z11.
2. Temperature range: -55°C to +125°C.
3. For application tooling and installation, see RPIP-684-00.
For best results, prepare the wire as shown:
