APPLICATIONS - Environments subject to high vibration
- Cryogenics
- Accurate temperature measurements in high temperature gradients
- Limited mounting space required
- F ood industry
- H.V.A.C.
SPECIAL FEATURES - No hysteresis
- Small dimensions
- High temperature stability
- Short response time
- High vibration resistance
DESIGN One or two plat inum bands are wound on a glass tu be and are
protected from environment by a glass layer. The lead wire connection
has high pull strength.
NOMINAL VALUE - 100 Ωat 0°C
- Temperature coefficient α= 3850 ppm/K
TOLERANCE CLASS -IEC 751 : class B, A and B/3
- Closer tolerances in restricted temperature range
TEMPERATURE RANGE - From -200°C to +400°C
CONNECTION WIRES - Platinum coated nickel wires
HOUSING ADVICE - For use in dry environments only
RESISTANCE AND STABILITY - No hysteresis
- High vibration resistance
- Resistant to external forces and pressure
OPTIONS - Lead wires length
- Extension cable
Glass Wire-Wound
Resistance Element
Type GX
(-200°C to +400°C)
Temperature Sensor
Attention :All technic al da ta an d rec om m en dat io n s con c ern i n g the pro du ct s and ser vices of our firm are for informa ti on pur po s es on ly. No data given in our technical datasheets guarantee particular proper ties to any products. They
represent values obtained by experience and are intended as guidelines only. Seller reserves the right to make alterations in illustrations and technical data printed, resulting from further development.
Rev. 02-07
Glass wire-wound
suitable for high
vibration applications
HSTUSA 10/09
1901 Route 130
North Brunswick, NJ 08902
Phone 732-940-4400 Fax 732-940-4445
Email info.hst-us@heraeus.com
www.hst-us.com
Heraeus Sensor Technology USA
Standard Product
Type GX
Type Desi-
gnation Reference Nominal
reference LWLDAL1AL2A
Self-heating
in air
t0,5 t0,9 t0,5 t0,9
(Ohm at 0°C) (K/mW)
1Pt100 GX 518 32 205 108 100 5 3 1,8 10 - 0,20 0,36 0,14 0,35 8 30
1Pt100 GX 1013 32 205 113 100 10 6 1,3 10 - 0,20 0,39 0,4 1,30 4 12
1Pt100 GX 1018 32 205 118 100 10 6 1,8 10 - 0,20 0,36 0,14 0,35 8 30
1Pt100 GX 1218 34 015 120 100 12 3 1,8 6 - 0,20 0,36 0,14 0,35 8 30
1Pt100 GX 1513 SB0921 100 15 6 1,3 10 - 0,20 0,39 0,4 1,3 4 12
2Pt100 GX 1528 32 205 228 100 15 7 2,8 10 12 0,25 0,20 0,3 1,0 12 45
1Pt100 GX 518 32 205 074 100 5 3 1,8 10 - 0,20 0,36 0,14 0,35 8 30
1Pt100 GX 1013 32 205 458 100 10 6 1,3 10 - 0,20 0,39 0,4 1,30 4 12
1Pt100 GX 1218 34 015 121 100 12 3 1,8 6 - 0,20 0,36 0,14 0,35 8 30
1Pt100 GX 1513 SB0920 100 15 6 1,3 10 - 0,20 0,39 0,4 1,3 4 12
2Pt100 GX 1528 32 205 241 100 15 7 2,8 10 12 0,25 0,20 0,3 1,0 12 45
1Pt100 GX 518 32 205 101 100 5 3 1,8 10 - 0,20 0,36 0,14 0,35 8 30
1Pt100 GX 1013 32 205 463 100 10 6 1,3 10 - 0,20 0,39 0,4 1,30 4 12
1Pt100 GX 1513 SB0919 100 15 6 1,3 10 - 0,20 0,39 0,4 1,3 4 12
(Dimensions in mm)
Class B
Class A
Class B/3
(s)
Response time
Water Air
v = 0,4 m/s v = 1 m/s
Attention :All technic al da ta an d rec om m en dat io n s con c ern i n g the pro du ct s and ser vices of our firm are for informa ti on pur po s es on ly. No data given in our technical datasheets guarantee particular properties to any products. They represent values obtained by experience and are
intended as guidelines only. Seller reserves the right to make alterations in illustrations and technical data printed, resulting from further development.
Rev. 02-07
DIMENSIONAL TOLERANCES : L
D
AL
A
(length of body)
(diameter of body)
(connection wire length)
(connection wire diameter)
= ±1mm
= +0,1-0,3mm
= ±2mm
= ±0,02 mm
HSTUSA 10/09
