Product Data Sheet
3M™ Moisture Barrier Bag Dri-Shield 2000
3M™ Static Shielding Bag 1900 and 1910
Product Data Sheet
This transparent metal-in static shielding bag is designed to provide a static safe
environment for sensitive electronic devices. Bags are printed with an ESD warning
symbol and a lot code for traceability. Open top (1900) and ZipTop (1910) styles are
available. The bags are heat sealable.
3M Static Shielding Bags 1900 are manufactured from a polyester, metal,
polyethylene laminate. The polyester dielectric in concert with the metal layer is
intended to provide shielding of Electrostatic Discharge (ESD) and to help minimize
the penetration of electric field.
These bags are tested to meet or exceed certain electrical and physical requirements
of Static Shielding Bags, ANSI/ESD S541, and to be ANSI/ESD S20.20 program
compliant. Bags are RoHS Compliant* and lead-free**.
3M
™
Static Shielding Bag
1900 and 1910
Physical Typical Value Testing Method
Tensile Strength
5100 PSI, 35 MPa
ASTM D882
Puncture Resistance
12 lbs, 53 N
MIL-STD-3010C Method 2065
Seal Strength
9 lbs, 40 N
ASTM D882
Thickness
2.8 mils, .071 mm +/-15%
MIL-STD-3010C Method 1003
Marking Adhesion
Pass
IPC-TM-650 2.4.1
Transparency 40% Tobias
Electrical Typical Value Testing Method
ESD Shielding <10 nJ ANSI/ESD STM11.31
Surface Resistance -
Interior
<1x10
11
ohms
ANSI/ESD STM11.11
Surface Resistance -
Exterior
<1x10
11
ohms
ANSI/ESD STM11.11
Static Decay
< 2 seconds
ETS 406D
Cleanliness Typical Value Testing Method
Silicone Not Detected FTIR
Heat Sealing Conditions Typical Value
Temperature 375°F, 190°C
Time
0.5 – 3.5 seconds
Pressure
30 – 70 PSI, 206 – 482 KPa
This product is intended for commercial use only. This product is not on the Qualified
Product Listing under the Defense Standardization Program.
Product Data Sheet
3M™ Moisture Barrier Bag Dri-Shield 2000
3M™ Static Shielding Bag 1900 and 1910
3M
™
Static Shielding Bags, Open Top 1900
3M
™
Static Shielding Bags, ZipTop 1910
Product Data Sheet
3
Electronic Solutions Division
Static Control Products
926 JR Industrial Drive
Sanford, NC 27332-9733
Toll-Free: 866-722-3736
International: 919-718-0000
Email: 3mstaticinfo@mmm.com
www.3Mstatic.com
Please recycle. Printed in USA.
© 3M 2013. All rights reserved.
98-0799-1128-9 JHA
Important Notice
All statements, technical information, and recommendations related to 3M’s products
are based on information believed to be reliable, but the accuracy or completeness is not
guaranteed. Before using this product, you must evaluate it and determine if it is suitable for
your intended application. You assume all risks and liability associated with such use. Any
statements related to the product which are not contained in 3M’s current publications, or
any contrary statements contained on your purchase order shall have no force or effect unless
expressly agreed upon, in writing, by an authorized ofcer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for one year from the
time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT
LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period
stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M
product or refund the purchase price of the 3M product. Except where prohibited by law, 3M
will not be liable for any indirect, special, incidental or consequential loss or damage arising
from this 3M product, regardless of the legal theory asserted.
3M is a trademark of 3M Company. All other trademarks are owned by their respective companies.
* RoHS 2011/65/EU Compliant means that the product or part does not contain any of the substances in excess of the maximum
concentration values (“MCVs”) in EU RoHS Directive 2011/65/EU. The MCVs are by weight in homogeneous materials. This
information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party
suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information, then 3M’s entire liability and Buyer’s exclusive
remedy will be in accordance with the Warranty section.
**Lead-free means that the product has less than 2 ppm of lead when tested by ICP-AES, with reference to EPA method 3051A/3052.
• Standard sizes for prompt shipment (usually same day).
• Width is measured from inside seam to inside seam.
• Length is measured from the top edge to the bottom fold.
• Opening is in the “width” dimension.
• Custom bag sizes are available.
Open Top BagZipTop Bag
Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Oset 0 to 0.250
Seal width +/- 0.125
Tolerance (inches): Width -0, +0.250
Length +/- 0.125 Offset 0 to 0.250
Seal width +/- 0.125
Dimensions
(W x L in.)
Part No. Dimensions
(W x L in.)
Part No. Dimensions
(W x L in.)
Part No.
3 x 5 19035
7 x 15 190715 12 x 16 1901216
4 x 4
19044
8x 8 19088 12 x 18 1901218
4 x 6
19046
8 x 10 190810 14 x 18 1901418
5 x 8
19058
8 x 12 190812 15 x 18 1901518
6 x 8 19068 10 x 12 1901012 16 x 24 1901624
6 x 10 190610 10 x 14 1901014 18 x 18 1901818
11 x 15 1901115 18 x 24 1901824
Custom Sizes Available
Dimensions
(W x L in.)
Part No. Dimensions
(W x L in.)
Part No. Dimensions
(W x L in.)
Part No.
3 x 5 19135
6 x 10 191610 11 x 15 1911115
4 x 6 19146 8 x 8 191810 12 x 16 1911216
5 x 8
19158
8 x 12 191812 12 x 18 1911218
6 x 8 19168 10 x 12 1911012 18 x 18 1911818
Custom Sizes Available
Open Top Bag ZipTop Bag
