Vectron International 267 Lowell Road, Hudson NH 03051 Tel: 1-88-VECTRON-1 e-mail: vectron@vectron.com
VVC1 VVC2
Voltage Controlled Crystal Oscillator
The VVC1 Voltage Controlled Crystal Oscillator
Features
• VCXO with a CMOS output
• Small 5.0 X 7.0 X 1.9 mm package
• Output frequencies to 66 MHz
• 5.0 or 3.3 V operation
• Low Jitter < 6 pS rms, fo>12MHz
• Tri-State Output for test and board debug
• 0/70 or –40/85 °C operating temperature
• Hermetically sealed ceramic SMD package
• Lead free construction
• Product is compliant to RoHS directive
and fully compatible with lead free assembly
Applications
• SONET/SDH/DWDM
• Ethernet, Gigabit Ethernet
• xDSL/PCMCIA cards
• Digital Video
• Broadband Access
Description
Vectron’s VVC1/VVC2 Voltage Controlled
Crystal Oscillator (VCXO) is a quartz stabilized
square wave generator with a CMOS output and
is tested at CMOS and TTL (5.0 volt operation)
logic levels.
The VVC1/VVC2 uses fundamental crystals
resulting in low jitter performance and a
monolithic IC which improves reliability and
reduces cost.
Vc fO
Output
Buffer /
Tri-state
Input
Buffer
ESD Diodes
VVC1, VVC2 Voltage Controlled Crystal Oscillator
Vectron International 267 Lowell Rd, Hudson NH 03051 Tel: 1-88-VECTRON-1 e-mail: vectron@vectron.com
Performance Characteristics
Table 1. Electrical Performance
Parameter Symbol Min Typical Maximum Units
Frequency fO 1.544 65.536 MHz
Supply Voltage 1 (+5.0 V ± 5%)
(+3.3 V ± 5%)
(+2.7 V + 5%)4
VDD
4.750
3.135
2.7
5.0
3.3
2.7
5.250
3.465
2.835
V
Supply Current (+5.0 V)
(+2.7 or +3.3 V) IDD
55
40 mA
Output Logic Levels
Output Logic High2
Output Logic Low2
VOH
VOL
0.9*VDD
0.1VDD
V
V
Transition Times
Rise Time2
Fall Time2
tR
tF
5
5
ns
ns
Symmetry or Duty Cycle3 SYM 45 50 55 %
Operating temperature (ordering option) 0/70 or –40/85 °C
Total Pull Range (ordering option)
Or
Absolute Pull Range
±50, ±100 or ±150
±50, ±80 or ±100
ppm
Test Conditions for APR (+5V option) VC 0.5 4.5 V
Test Conditions for APR (+3.3V option) VC 0.3 3.0 V
Gain Transfer Positive ppm/V
Control Voltage Impedance 90 Kohm
Control Voltage Bandwidth (-3dB) BW 10 kHz
Package Size 5.0 x 7.0 x 1.9 mm
1. A 0.01uF and a 0.1uF capacitor should be located as close to the supply as possible (to ground) is recommended.
2. Figure 1 defines these parameters. Figure 2 illustrates the equivalent five gate TTL load and operating conditions under which
these parameters are tested and specified.
3. Symmetry is defined as (ON TIME/PERIOD with Vs= 1.4 V for TTL and Vs=2.5 V for CMOS, 5 volt operation, and Vs=1.65V
for 3.3 Volt operation.
4. Only available as 50 ppm APR.
Figure 1. Output Waveform Figure 2. Typical Output Test Conditions (25±5°C)
80%
Vs
20%
tF
tR
Period
On Time +
-
+
-IC
VC
4
3
.1µF.01µF
15pF
25
6
1
IDD 650Ω
VDD
1.8k
VVC1, VVC2 Voltage Controlled Crystal Oscillator
Vectron International 267 Lowell Rd, Hudson NH 03051 Tel: 1-88-VECTRON-1 e-mail: vectron@vectron.com
Outline Diagram, Pad Layout and Pin Out
Pin # Symbol Function
1 VC Control Voltage
2 NC or Tri-state No Connect or Tri-state
3 GND Ground
4 fO Output Frequency
5 Tri-state or NC Logic low disables output
Logic high or no connection enables output waveform
6 VDD Supply Voltage
VVC1, VVC2 Voltage Controlled Crystal Oscillator
Vectron International 267 Lowell Rd, Hudson NH 03051 Tel: 1-88-VECTRON-1 e-mail: vectron@vectron.com
A
E
C
D
B
GFJ
LI
KH
Tape and Reel
Table 2. Tape and Reel Dimensions (mm)
Tape Dimensions Reel Dimensions # Per
Product A B C D E F G H I J K L Reel
VVC1/2 16 7.5 1.5 4 8 2 21 13 60 2 17 180 1000
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can permanently damage the device. Functional
operation is not implied at these or any other conditions in excess of conditions represented in the
operational sections of this data sheet. Exposure to absolute maximum ratings for extended periods may
adversely affect device reliability.
Table 3. Absolute Maximum Ratings
Parameter Symbol Ratings Unit
Power Supply VDD 6 Vdc
Storage Temperature Tstorage -55/125 °C
Voltage Control Range VC Gnd to VDD V
VVC1, VVC2 Voltage Controlled Crystal Oscillator
Vectron International 267 Lowell Rd, Hudson NH 03051 Tel: 1-88-VECTRON-1 e-mail: vectron@vectron.com
Reliability
The VVC1/VVC2 is capable of meeting the following qualification tests.
Table 4. Environnemental Compliance
Parameter Conditions
Mechanical Shock MIL-STD-883 Method 2002
Mechanical Vibration MIL-STD-883 Method 2007
Solderability MIL-STD-883 Method 2003
Gross and Fine Leak MIL-STD-883 Method 1014
Resistance to Solvents MIL-STD-883 Method 2016
Moisture Sensitivity Level 1
Handling Precautions
Although ESD protection circuitry has been designed into the the VVC1/VVC2, proper precautions should
be taken when handling and mounting. VI employs a Human Body Model and a Charged-Device Model
(CDM) for ESD susceptibility testing and design protection evaluation. ESD thresholds are dependent on
the circuit parameters used to define the model. Although no industry wide standard has been adopted
for the CDM, a standard HBM of resistance = 1.5kohms and capacitance = 100pF is widely used and
therefore can be used for comparison purposes.
Table 5. ESD Ratings
Model Minimum Conditions
Human Body Model 1500 MIL-STD-883 Method 3115
Charged Device Model 1000 JESD 22-C101
Suggested IR profile
Devices are built using lead free epoxy and can also be subjected to standard lead free IR reflow
conditions.
Table 6. Reflow Profile (IPC/JEDEC J-STD-020)
Parameter Symbol Value
PreHeat Time t S 60 sec Min, 200 sec Max
Ramp Up R UP 3
oC/sec Max
Time Above 217 oC t L 60 sec Min, 150 sec Max
Time To Peak Temperature t AMB-P 480 sec Max
Time At 260 oC (max) t P 20 sec Min, 40 sec Max
Time At 240°C (max) tp2 60 sec MAX
Ramp Down R DN 6
oC/sec Max
VVC1, VVC2 Voltage Controlled Crystal Oscillator
Vectron International 267 Lowell Rd, Hudson NH 03051 Tel: 1-88-VECTRON-1 e-mail: vectron@vectron.com
Table 7. Standard Frequencies (MHz)
1.544 2.048 4.096 8.192 10.000
12.000 12.288 12.352 13.000 14.318
15.440 16.000 16.384 18.432 19.440
20.000 20.480 24.576 24.704 27.000
30.000 32.000 32.768 34.368 35.328
38.880 40.000 40.960 44.736 51.840
52.000 62.208 65.536
Other frequencies may be available upon request. Standard frequencies are frequencies which the crystal has been designed and
does not imply a stock position.
Ordering Information
Product Family
VV = VCXO
Package
5x7x1.9
Tristate
1= Pin 5
2= Pin 2
Power Supply, Linearity
A= 5.0V, 20% Linearity
B= 3.3V, 20% Linearity
C= 5.0V, 10% Linearity
D= 2.7V, 20% Linearity*
F= 3.3V, 10% Lineari ty
Frequency
ex.: 44M736 = 44.736MHz
Temperature Range,
Stability (for TPR)
B= 0/70°C, ±50 ppm
D= -40/85°C, ±50 ppm
E= 0/70°C, ±25 ppm
F= -40/85°C, ±25 ppm
Absolute Pull Range
G= ±50 ppm APR
N= ±80 ppm APR
H= ±100 ppm APR
or Total Pull Range
1= ±50 ppm
2= ±100 ppm
3= ±150 ppm
NOTE: Not all combinations of options are available. Higher frequencies have less pull capability, especially at +3.3 volts supply,
and higher pull can result in 20% linearity instead of 10%. Consult factory or your local sales representative with application
requirements.
* Only 50 ppm APR is available with this power supply
www.vectron.com
Vectron International reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed
as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. VVC1 (October 2007)
For Additional Information, Please Contact:
USA: Vectron International • 267 Lowell Road, Hudson, NH 03051
• Tel: 1-88-VECTRON-1 • Fax: 1-888-FAX-VECTRON
EUROPE: Landstrasse, D-74924, Neckarbischofsheim, Germany •
Tel: 49 (0) 7268 8010 • Fax: 49 (0) 7268 801281
ASIA: Vectron Asia Pacific Sales 1F~2F. No.8 Workshop No.308 Fenju Rd.,
WaiGaoQiao Free Trade Zone, Pudong New Area Shanghai, China 200131
•Tel: 8621 50480777 • Fax: 8621 50481881
