Film Capacitors Metallized Polypropylene Film Capacitors (MKP) Series/Type: Date: B32620 ... B32621 August 2004 (c) EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Association), unless otherwise agreed. Metallized polypropylene film capacitors (MKP) B32620 ... B32621 High pulse (stacked) Typical applications Compact fluorescent lamps (CFL) SMPS Dimensional drawing Climatic Max. operating temperature: 105 C Climatic category (IEC 60068-1): 55/100/56 Construction Dielectric: polypropylene (PP) Stacked-film technology Plastic case (UL 94 V-0) Epoxy resin sealing Dimensions in mm Features Very high pulse strength Very good self-healing properties Smallest possible dimensions High contact reliability Lead spacing 0.4 Lead diameter Type d1 7.5 10.0 0.5 0.61) 1) 0.5 mm for capacitor width w = 4 mm Terminals Parallel wire leads, lead-free tinned Special lead lengths available on request Marking Manufacturer's logo, rated capacitance (coded), cap. tolerance (code letter), rated voltage, date of manufacture (coded), for lead spacing 7.5 mm: style (MKP), for lead spacing 10 mm: lot number, series number (621) Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For notes on taping, refer to chapter "Taping and packing". 2 B32620 B32621 B32620 ... B32621 High pulse (stacked) Overview of available types Lead spacing 7.5 mm 10.0 mm Type B32620 B32621 Page 4 VR (VDC) 160 250 400 630 1000 1000 160 250 400 630 1000 Vrms (VAC) 90 140 200 400 500 600 90 140 200 400 500 6 CR (nF) 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 3 B32620 High pulse (stacked) Ordering codes and packing units (lead spacing 7.5 mm) VR Vrms CR f 1 kHz VDC VAC nF 160 90 250 140 400 200 630 400 1000 500 33 47 68 100 150 22 33 47 68 100 6.8 10 15 22 33 1.5 2.2 3.3 4.7 6.8 10 15 1.5 2.2 3.3 4.7 6.8 Max. dimensions wxhxl mm 4.0 x 8.5 x 10.0 4.0 x 8.5 x 10.0 5.0 x 10.5 x 10.0 5.0 x 10.5 x 10.0 6.0 x 12.0 x 10.3 4.0 x 8.5 x 10.0 4.0 x 8.5 x 10.0 5.0 x 10.5 x 10.0 5.0 x 10.5 x 10.0 6.0 x 12.0 x 10.3 4.0 x 8.5 x 10.0 4.0 x 8.5 x 10.0 5.0 x 10.5 x 10.0 5.0 x 10.5 x 10.0 6.0 x 12.0 x 10.3 4.0 x 8.5 x 10.0 4.0 x 8.5 x 10.0 4.0 x 8.5 x 10.0 4.0 x 8.5 x 10.0 5.0 x 10.5 x 10.0 5.0 x 10.5 x 10.0 6.0 x 12.0 x 10.3 4.0 x 8.5 x 10.0 4.0 x 8.5 x 10.0 5.0 x 10.5 x 10.0 5.0 x 10.5 x 10.0 6.0 x 12.0 x 10.3 Ordering code (composition see below) B32620A5333+*** B32620A5473+*** B32620A5683+*** B32620A5104+*** B32620A5154+*** B32620A3223+*** B32620A3333+*** B32620A3473+*** B32620A3683+*** B32620A3104+*** B32620A4682+*** B32620A4103+*** B32620A4153+*** B32620A4223+*** B32620A4333+*** B32620A6152+*** B32620A6222+*** B32620A6332+*** B32620A6472+*** B32620A6682+*** B32620A6103+*** B32620A6153+*** B32620A0152+*** B32620A0222+*** B32620A0332+*** B32620A0472+*** B32620A0682+*** Ammo Reel Untaped pack pcs./unit pcs./unit pcs./unit 2000 2000 1600 1600 1300 2000 2000 1600 1600 1300 2000 2000 1600 1600 1300 2000 2000 2000 2000 1600 1600 1300 2000 2000 1600 1600 1300 1800 1800 1400 1400 1100 1800 1800 1400 1400 1100 1800 1800 1400 1400 1100 1800 1800 1800 1800 1400 1400 1100 1800 1800 1400 1400 1100 Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = 20% K = 10% J = 5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 4 1500 1500 1000 1000 750 1500 1500 1000 1000 750 1500 1500 1000 1000 750 1500 1500 1500 1500 1000 1000 750 1500 1500 1000 1000 750 B32620 High pulse (stacked) Ordering codes and packing units (lead spacing 7.5 mm) VR Vrms CR f 1 kHz VDC VAC nF 0.47 1000 600 0.68 1.0 1.5 2.2 3.3 4.7 Max. dimensions wxhxl mm 4.0 x 8.5 x 10.0 5.0 x 10.5 x 10.0 5.0 x 10.5 x 10.0 5.0 x 10.5 x 10.0 5.0 x 10.5 x 10.0 5.0 x 10.5 x 10.0 6.0 x 12.0 x 10.3 Ordering code (composition see below) B32620J0471+*** B32620J0681+*** B32620J0102+*** B32620J0152+*** B32620J0222+*** B32620J0332+*** B32620J0472+*** Ammo pack pcs./unit 2000 1600 1600 1600 1600 1600 1300 Reel Untaped pcs./unit 1800 1400 1400 1400 1400 1400 1100 pcs./unit 1500 1000 1000 1000 1000 1000 750 Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = 20% K = 10% J = 5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 5 B32621 High pulse (stacked) Ordering codes and packing units (lead spacing 10 mm) VR Vrms CR f 1 kHz VDC VAC nF 160 90 250 140 400 200 630 400 47 68 100 150 220 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 10 15 22 33 47 2.2 3.3 4.7 6.8 10 15 22 33 Max. dimensions wxhxl mm 4.0 x 7.0 x 13.0 4.0 x 9.0 x 13.0 5.0 x 11.0 x 13.0 5.0 x 11.0 x 13.0 6.0 x 12.0 x 13.0 4.0 x 7.0 x 13.0 4.0 x 9.0 x 13.0 4.0 x 9.0 x 13.0 4.0 x 9.0 x 13.0 4.0 x 9.0 x 13.0 4.0 x 9.0 x 13.0 4.0 x 9.0 x 13.0 4.0 x 9.0 x 13.0 4.0 x 9.0 x 13.0 5.0 x 11.0 x 13.0 6.0 x 12.0 x 13.0 4.0 x 9.0 x 13.0 4.0 x 9.0 x 13.0 5.0 x 11.0 x 13.0 5.0 x 11.0 x 13.0 6.0 x 12.0 x 13.0 4.0 x 7.0 x 13.0 4.0 x 9.0 x 13.0 4.0 x 9.0 x 13.0 4.0 x 9.0 x 13.0 4.0 x 9.0 x 13.0 5.0 x 11.0 x 13.0 6.0 x 12.0 x 13.0 6.0 x 12.0 x 13.0 Ordering code (composition see below) B32621A5473+*** B32621A5683+*** B32621A5104+*** B32621A5154+*** B32621A5224+*** B32621A3222+*** B32621A3332+*** B32621A3472+*** B32621A3682+*** B32621A3103+*** B32621A3153+*** B32621A3223+*** B32621A3333+*** B32621A3473+*** B32621A3683+*** B32621A3104+*** B32621A4103+*** B32621A4153+*** B32621A4223+*** B32621A4333+*** B32621A4473+*** B32621A6222+*** B32621A6332+*** B32621A6472+*** B32621A6682+*** B32621A6103+*** B32621A6153+*** B32621A6223+*** B32621A6333+*** Ammo Reel Untaped pack pcs./unit pcs./unit pcs./unit 1000 1000 830 830 680 1000 1000 1000 1000 1000 1000 1000 1000 1000 830 680 1000 1000 830 830 680 1000 1000 1000 1000 1000 830 680 680 1700 1700 1300 1300 1100 1700 1700 1700 1700 1700 1700 1700 1700 1700 1300 1100 1700 1700 1300 1300 1100 1700 1700 1700 1700 1700 1300 1100 1100 Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = 20% K = 10% J = 5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 6 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 B32621 High pulse (stacked) Ordering codes and packing units (lead spacing 10 mm) VR Vrms CR f 1 kHz VDC VAC nF 2.2 1000 500 3.3 4.7 6.8 10 Max. dimensions wxhxl mm 4.0 x 7.0 x 13.0 4.0 x 9.0 x 13.0 4.0 x 9.0 x 13.0 5.0 x 11.0 x 13.0 6.0 x 12.0 x 13.0 Ordering code (composition see below) B32621A0222+*** B32621A0332+*** B32621A0472+*** B32621A0682+*** B32621A0103+*** Ammo pack pcs./unit 1000 1000 1000 830 680 Reel Untaped pcs./unit 1700 1700 1700 1300 1100 pcs./unit 1000 1000 1000 1000 1000 Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = 20% K = 10% J = 5% *** = Packaging code: 289 = Ammo pack 189 = Reel 000 = Untaped (lead length 6 1 mm) 7 B32620 ... B32621 High pulse (stacked) Technical data Operating temperature range Max. operating temperature Top,max Upper category temperature Tmax Lower category temperature Tmin Rated temperature TR Dissipation factor tan (in 10-3) at at 20 C (upper limit values) Insulation resistance Rins or time constant = CR Rins at 20 C, rel. humidity 65% (minimum as-delivered values) DC test voltage Category voltage VC (continuous operation with VDC or VAC at f 1 kHz) Operating voltage V op for short operating periods VDC or VAC at f 1 kHz) Damp heat test Limit values after damp heat test 1 kHz 10 kHz 100 kHz 100 G CR 0.1 F 0.1 F < CR 0.22 F 4.0 1.0 1.5 1.6 VR, 2 s TA (C) DC voltage derating TA 85 VC = VR 85<TA100 VC = VR (165TA)/80 TA (C) DC voltage (max. hours) TA 85 Vop = 1.25 VC (2000 h) 85<TA100 Vop = 1.25 VC (1000 h) 56 days/40 C/93% relative humidity Capacitance change C/C Dissipation factor change tan Insulation resistance Rins Reliability: Failure rate Service life tSL Failure criteria: Total failure Failure due to variation of parameters +105 C +100 C 55 C +85 C AC voltage derating VC,rms = Vrms VC,rms=Vrms (165TA)/80 AC voltage (max. hours) Vop = 1.0 VC,rms (2000 h) Vop = 1.0 VC,rms (1000 h) 3% 0.5 10-3 (at 1 kHz) 1.0 10-3 (at 10 kHz) 50% of minimum as-delivered values 1 fit ( 1 10-9/h) at 0.5 VR, 40 C 200 000 h at 1.0 VR, 40 C For conversion to other operating conditions and temperatures, refer to chapter "Quality assurance", page . Short circuit or open circuit Capacitance change C/C Dissipation factor tan Insulation resistance Rins 8 > 10% > 4 upper limit value < 1500 M B32620 ... B32621 High pulse (stacked) Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/s. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V 2/s. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt values Lead spacing VR Vrms VDC VAC 160 90 250 140 400 200 630 400 1 000 500 1 000 600 7.5 mm 10 mm dV/dt in V/s 750 1 200 1 500 2 700 3 200 4 000 600 900 1 050 1 800 2 400 7.5 mm 10 mm k0 in V2/s 240 000 600 000 1 200 000 3 400 000 6 400 000 8 000 000 190 000 450 000 840 000 2 250 000 4 800 000 k0 values Lead spacing VR Vrms VDC VAC 160 90 250 140 400 200 630 400 1 000 500 1 000 600 9 B32620 ... B32621 High pulse (stacked) Impedance Z versus frequency f (typical values) 10 B32620 High pulse (stacked) Permissible AC voltage Vrms versus frequency f (for sinusoidal waveforms, TA 90 C) For T A >90 C, please refer to "General technical information", section 3.2.3. Lead spacing 7.5 mm 160 VDC/90 VAC 250 VDC/140 VAC 400 VDC/200 VAC 630 VDC/400 VAC 11 B32620 High pulse (stacked) Permissible AC voltage Vrms versus frequency f (for sinusoidal waveforms, TA 90 C) For T A >90 C, please refer to "General technical information", section 3.2.3. Lead spacing 7.5 mm 1000 VDC/500 VAC 1000 VDC/600 VAC 12 B32621 High pulse (stacked) Permissible AC voltage Vrms versus frequency f (for sinusoidal waveforms, TA 90 C) For T A >90 C, please refer to "General technical information", section 3.2.3. Lead spacing 10 mm 160 VDC/90 VAC 250 VDC/140 VAC 400 VDC/200 VAC 630 VDC/400 VAC 13 B32621 High pulse (stacked) Permissible AC voltage Vrms versus frequency f (for sinusoidal waveforms, TA 90 C) For T A >90 C, please refer to "General technical information", section 3.2.3. Lead spacing 10 mm 1000 VDC/500 VAC 14 B32620 ... B32621 High pulse (stacked) Sinus-wave application, lighting Permissible voltage and current / waveform 15 B32620 High pulse (stacked) Sinus-wave application, lighting Permissible current Ipp versus rated capacitance CR Lead spacing 7.5 mm 160 VDC/90 VAC 250 VDC/140 VAC 400 VDC/200 VAC 630 VDC/400 VAC 16 B32620 High pulse (stacked) Sinus-wave application, lighting Permissible current Ipp versus rated capacitance CR Lead spacing 7.5 mm 1000 VDC/500 VAC 1000 VDC/600 VAC 17 B32621 High pulse (stacked) Sinus-wave application, lighting Permissible current Ipp versus rated capacitance CR Lead spacing 10 mm 160 VDC/90 VAC 250 VDC/140 VAC 400 VDC/200 VAC 630 VDC/400 VAC 18 B32621 High pulse (stacked) Sinus-wave application, lighting Permissible current Ipp versus rated capacitance CR Lead spacing 10 mm 1000 VDC/500 VAC 19