NOTES: APH-SMAPSMBu REVISIONS . DRAWING NO. REV DESCRIPTION DATE ECO APPR 1. MATERIALS AND FINISHES: THIRD ANGLE PRO. @ < | A RELEASE TO MFG. 9/12/06 | 46261 | CPM/ B CORRECTED TITLE BLOCK 5/25/11 | 48598 | CPM/ BODY BRASS (ASTMB16 H02, C36000), GOLD PLATING CONTACT PIN BRASS, GOLD PLATING INSULATOR PTFE PER ASTM D 1710 OR EQUIV. 2. ELECTRICAL: A. IMPEDANCE: 50 OHM B. FREQUENCY RANGE: DC 10 GHz 3. MECHANICAL: A. TEMPERATURE RANGE: -65 C TO +165 C 4. PACKAGING: A. QUANTITY: SINGLE PACK B. MARKING: BAG TO BE MARKED "AMPHENOL, APH-SMAPSMBJ, AND DATE CODE / + oO " _ _ _ _ oO o 23.40 [.922] UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES AND TOLERANCES ARE: | MATERIAL DRAWN PATE TLE 2 PLACE DECIMAL 3 PLACE DECIMAL ANGLES C. McGRATH 4/28/05 Amphenol .015 (0,381 mm) +.005 (0,127 mm) +1 ENGINEER DATE SMA MALE TO Ampreno| Corporation 0. BARTHELMES 4/28/05 RF/Microwave Operations NOTICE [hese drawings, sre eatene: or other data (1) are, and, en the REFERENCE APPROVED L 28 / S M B FE MALE Danbury, Conn. U.S.A. 06810 eorrideatial and not to be disclosed to any person other than those to whom they 0. BARTHELMES 9 / 8 / 06 A D A PT F R are given by Amphenol Corp. The furnishing of these drawings, specifications, or other data by Amphenol Corp., or to any other person to anyone for any purpose is SCALE: 2:1 SHEET OF not to be regarded by implication or otherwise in any manner licensing, granting ISSUE rights or permitting such holder or any other person to manufacture, use or sell any CODE ID DWG SIZE DRAWING NO. product. process or deign, patented, or otherwise, thot may In ony way be relied to/ cad LE H:\\DEPT611\ASSY\APH\SMAPSMBJ 74868 B APH-SMAP-SMBJ_| B