Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Revised February 2000 DM74ALS573B Extended Temperature Octal D-Type Transparent Latch with 3-STATE Outputs General Description Features These 8-bit registers feature totem-pole 3-STATE outputs designed specifically for driving highly-capacitive or relatively low-impedance loads. The high-impedance state and increased high-logic-level drive provide these registers with the capability of being connected directly to and driving the bus lines in a bus-organized system without need for interface or pull-up components. They are particularly attractive for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. Switching specifications at 50 pF The eight latches of the DM74ALS573B are transparent Dtype latches. While the enable (G) is HIGH the Q outputs will follow the data (D) inputs. When the enable is taken LOW the output will be latched at the level of the data that was set UP. Switching specifications guaranteed over full temperature and VCC range Advanced oxide-isolated, ion-implanted Schottky TTL process Functionally equivalent with DM74LS373 Improved AC performance over DM74LS373 at approximately half the power 3-STATE buffer-type outputs drive bus lines directly A buffered output control input can be used to place the eight outputs in either a normal logic state (HIGH or LOW logic levels) or a high-impedance state. In the high-impedance state the outputs neither load nor drive the bus lines significantly. The output control does not affect the internal operation of the latches. That is, the old data can be retained or new data can be entered even while the outputs are OFF. Ordering Code: Order Number Package Number DM74ALS573BWM M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide Package Description DM74ALS573BSJ M20D 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide DM74ALS573BN N20A 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Devices also available in Tape and Reel. Specify by appending the suffix letter "X" to the ordering code. Connection Diagram (c) 2000 Fairchild Semiconductor Corporation DS006226 www.fairchildsemi.com DM74ALS573B Extended Temperature Octal D-Type Transparent Latch with 3-STATE Outputs April 1984 DM74ALS573B Function Table Logic Diagram Output Enable Control G D Output L H H L H L L L L X Q0 H X X Z Q H L = LOW State H = HIGH State X = Don't Care Z = High Impedance State Q0 = Previous Condition of Q www.fairchildsemi.com 2 Supply Voltage 7V Input Voltage 7V Voltage Applied to Disabled Output 5.5V Note 1: The "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The "Recommended Operating Conditions" table will define the conditions for actual device operation. 0C to +70C Operating Free Air Temperature Range -65C to +150C Storage Temperature Range Typical JA N Package 56.0C/W M Package 75.0C/W Recommended Operating Conditions Symbol Parameter Min Nom Max Units 4.5 5 5.5 V LOW Level Input Voltage 0.8 V VCC Supply Voltage VIH HIGH Level Input Voltage VIL 2 V IOH HIGH Level Output Current -2.6 mA IOL LOW Level Output Current 24 mA tW Width of Enable Pulse, HIGH 10 ns tSU Data Setup Time (Note 2) 10 ns tH Data Hold Time (Note 2) 7 TA Free Air Operating Temperature ns 0 C 70 Note 2: The () arrow indicates the negative edge of the enable is used for reference. Electrical Characteristics over recommended operating free air temperature range. All typical values are measured at VCC = 5V, TA = 25C. Symbol Parameter Conditions VIK Input Clamp Voltage VCC = 4.5V, II = -18 mA VOH HIGH Level VCC = 4.5V Output Voltage VIL = VIL Max VOL Min IOH = Max 2.4 Typ Max Units -1.2 V 3.2 V VCC = 4.5V to 5.5V IOH = -400 A LOW Level VCC = 4.5V IOL = 12 mA VCC - 2 0.25 0.4 Output Voltage VIH = 2V IOL = 24 mA 0.35 0.5 V 0.1 mA V V II Input Current @ Maximum IIH HIGH Level Input Current VCC = 5.5V, VIH = 2.7V 20 A IIL LOW Level Input Current VCC = 5.5V, VIL = 0.4V -0.1 mA IO Output Drive Current VCC = 5.5V, VO = 2.25V -112 mA IOZH OFF-State Output Current VCC = 5.5V, VIH = 2V HIGH Level Voltage Applied VO = 2.7V 20 A -20 A Input Voltage IOZL ICC VCC = 5.5V, VIH = 7V OFF-State Output Current VCC = 5.5V, VIH = 2V LOW Level Voltage Applied VO = 0.4V Supply Current -30 VCC = 5.5V Outputs HIGH 10 17 mA Outputs OPEN Outputs LOW 15 24 mA 15.5 27 mA Outputs Disabled 3 www.fairchildsemi.com DM74ALS573B Absolute Maximum Ratings(Note 1) DM74ALS573B Switching Characteristics over recommended operating free air temperature range. Symbol tPLH tPHL Parameter Conditions Propagation Delay Time VCC = 4.5V to 5.5V LOW-to-HIGH Level Output RL = 500 Propagation Delay Time CL = 50 pF HIGH-to-LOW Level Output tPLH Propagation Delay Time LOW-to-HIGH Level Output tPHL Propagation Delay Time HIGH-to-LOW Level Output tPZH tPZL tPHZ tPLZ From To Min Max Units Data Any Q 2 14 ns Data Any Q 2 14 ns Enable Any Q 6 20 ns Enable Any Q 6 19 ns Any Q 3 18 ns Any Q 4 18 ns Any Q 1 10 ns Any Q 1 15 ns Output Enable Time Output to HIGH Level Output Control Output Enable Time Output to LOW Level Output Control Output Disable Time Output from HIGH Level Output Control Output Disable Time Output from LOW Level Output Control www.fairchildsemi.com 4 DM74ALS573B Physical Dimensions inches (millimeters) unless otherwise noted 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide Package Number M20B 5 www.fairchildsemi.com DM74ALS573B Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M20D www.fairchildsemi.com 6 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Package Number N20A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 7 www.fairchildsemi.com DM74ALS573B Extended Temperature Octal D-Type Transparent Latch with 3-STATE Outputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued) ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com