flash to reflect light off objects for better color detection.
The 6 channels on the AS7262 are realized by silicon interference filters at 450nm, 500nm,
550nm, 570nm, 600nm, and 650nm. This breakout uses the I2C interface on the chip by
default, but a UART interface that accepts AT commands is also selectable.
We've placed the sensor on a PCB for you and included an SPI flash chip pre-programmed with
the device firmware, a 3.3V regulator, I2C level shifting, and the recommended LED flash. Both
the I2C and UART interfaces are broken out, making this breakout an excellent all-in-one
solution for all your color-sensing needs. The pinout for the UART interface is plug-and-play
compatible with the Adafruit FTDI Friend.
We've also prepared software libraries to get you up and running in Arduino or CircuitPython
with just a few lines of code!
TECHNICAL DETAILS
Check out our full guide for schematics, datasheets, Arduino & CircuitPython code and more!
Product Dimensions: 27.8mm x 25.0mm x 3.9mm / 1.1" x 1.0" x 0.2"
Product Weight: 2.6g / 0.1oz
Proximity, Light, RGB, and