FDS8984-F085 N-Channel PowerTrench(R) MOSFET FDS8984-F085 N-Channel PowerTrench(R) MOSFET 30V, 7A, 23m General Description Features This N-Channel MOSFET has been designed specifically to improve the overall efficiency of DC/DC converters using either synchronous or conventional switching PWM controllers. It has been optimized for low gate charge, low rDS(ON) and fast switching speed. Max rDS(on) = 23m, VGS = 10V, ID = 7A Max rDS(on) = 30m, VGS = 4.5V, ID = 6A Low gate charge 100% RG tested Qualified to AEC Q101 RoHS Compliant DD2 DD2 D1 D 5 DD1 SO-8 Pin 1 SO-8 4 Q2 6 G2 S2 G G1 S S1 S 3 2 7 Q1 8 S 1 MOSFET Maximum Ratings TA = 25C unless otherwise noted Symbol VDS Drain to Source Voltage Parameter VGS Gate to Source Voltage Drain Current Continuous ID Ratings 30 Units V 20 V 7 A (Note 1a) Pulsed EAS PD TJ, TSTG Single Pulse Avalache Energy (Note 2) 30 A 32 mJ Power Dissipation for Single Operation 1.6 W Derate above 25C 13 mW/C -55 to 150 C (Note 1a) 78 C/W (Note 1) 40 C/W Operating and Storage Temperature Thermal Characteristics RJA Thermal Resistance, Junction-to-Ambient RJC Thermal Resistance, Junction-to-Case Package Marking and Ordering Information Device Marking FDS8984 Device FDS8984-F085 (c)2010 Semiconductor Components Industries, LLC. September-2017, Rev. 1 Package SO-8 Reel Size 330mm 1 Tape Width 12mm Quantity 2500 units Publication Order Number: FDS8984-F085/D Symbol Parameter Test Conditions Min Typ Max Units Off Characteristics BVDSS Drain to Source Breakdown Voltage ID = 250A, VGS = 0V BVDSS TJ Breakdown Voltage Temperature Coefficient ID = 250A, referenced to 25C IDSS Zero Gate Voltage Drain Current VDS = 24V VGS = 0V IGSS Gate to Source Leakage Current VGS = 20V,VDS = 0V 30 V 23 mV/C 1 TJ = 125C 250 A 100 nA 2.5 V On Characteristics (Note 3) VGS(th) Gate to Source Threshold Voltage VDS = VGS, ID = 250A VGS(th) TJ Gate to Source Threshold Voltage Temperature Coefficient ID = 250A, referenced to 25C VGS = 10V, ID = 7A 19 23 Drain to Source On Resistance VGS = 4.5V, ID = 6A 24 30 VGS = 10V, ID = 7A, TJ = 125C 26 32 rDS(on) 1.2 1.7 - 4.3 mV/C m Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance RG Gate Resistance VDS = 15V, VGS = 0V, f = 1.0MHz 475 635 pF 100 135 pF 65 100 pF f = 1MHz 0.9 1.6 5 10 ns 9 18 ns 42 68 ns 21 34 ns 9.2 13 nC 5.0 7 nC Switching Characteristics (Note 3) td(on) Turn-On Delay Time tr Rise Time td(off) Turn-Off Delay Time tf Fall Time Qg Total Gate Charge Qg Total Gate Charge Qgs Gate to Source Gate Charge Qgd Gate to Drain "Miller" Charge VDD = 15V, ID = 7A VGS = 10V, RGS = 33 VDS = 15V, VGS = 10V, ID = 7A VDS = 15V, VGS = 5V, ID = 7A 1.5 nC 2.0 nC Drain-Source Diode Characteristics VSD Source to Drain Diode Voltage trr Diode Reverse Recovery Time Qrr Diode Reverse Recovery Charge ISD = 7A 0.9 1.25 V ISD = 2.1A 0.8 1.0 V IF = 7A, di/dt = 100A/s 33 ns 20 nC Notes: 1: RJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the drain pins. RJC is guaranteed by design while RCA is determined by the user's board design. a) 78C/W when mounted on a 0.5in2 pad of 2 oz copper b) 125C/W when mounted on a 0.02 in2 pad of oz copper Scale 1 : 1 on letter size paper 2: Starting TJ = 25C, L = 1mH, IAS = 8A, VDD = 27V, VGS = 10V. 3: Pulse Test:Pulse Width <300s, Duty Cycle <2%. www.onsemi.com 2 c) 135C/W when mounted on a minimun pad FDS8984-F085 N-Channel PowerTrench(R) MOSFET Electrical Characteristics TJ = 25C unless otherwise noted RDS(ON), NORMALIZED ID, DRAIN CURRENT (A) VGS=10V PULSE DURATION =80S DUTY CYCLE =0.5% MAX VGS=5.0V VGS=3.5V 20 VGS=4.5V VGS=4.0V 10 VGS=3.0V 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 ID = 7A VGS = 10V 1.2 1.0 0.8 0 40 80 VGS=3.5V VGS=4.0V 1.5 VGS=5.0V 0.5 5 120 IS, REVERSE DRAIN CURRENT (A) ID, DRAIN CURRENT (A) O TJ = 150 C 15 O TJ = 25 C 5 0 O TJ = - 55 C 1 2 3 VGS, GATE TO SOURCE VOLTAGE (V) Figure 5. Transfer Characteristics 25 30 PULSE DURATION = 80s DUTY CYCLE = 0.5%MAX 50 45 40 TJ = 125oC 35 30 25 20 15 TJ = 25oC 2 30 VDD = 5V 10 20 4 6 8 VGS, GATE TO SOURCE VOLTAGE (V) 10 Figure 4. On-Resistance vs Gate to Source Votlage PULSE DURATION =80S DUTY CYCLE =0.5% MAX 20 15 ID = 7A 55 160 Figure 3. On Resistance vs Temperature 25 10 VGS=10V 60 TJ, JUNCTION TEMPERATURE (oC) 30 VGS=4.5V 1.0 RDS(on), DRAIN TO SOURCE ON-RESISTANCE (mOHM) NORMALIZED DRAIN TO SOURCE ON-RESISTANCE 2.0 Figure 2. On-Resistance vs Drain Current and Gate Voltage 1.6 -40 VGS=3.0V ID, DRAIN CURRENT (A) Figure 1. On Region Characteristics 0.6 -80 PULSE DURATION =80S DUTY CYCLE =0.5% MAX 2.5 4.0 VDS, DRAIN-SOURCE VOLTAGE (V) 1.4 3.0 DRAIN-SOURCE ON-RESISTANCE 30 = 25C unless otherwise noted 4 10 1 VGS = 0V TJ = 150oC TJ = 25oC 0.1 TJ = -55oC 0.01 1E-3 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 VSD, BODY DIODE FORWARD VOLTAGE (V) Figure 6. Source to Drain Diode Forward Voltage vs Source Current www.onsemi.com 3 FDS8984-F085 N-Channel PowerTrench(R) MOSFET Typical Characteristics TJ = 25C unless otherwise noted 700 VGS, GATE TO SOURCE VOLTAGE(V) 10 600 CISS VDD = 15V VDD = 10V 6 4 CAPACITANCE (pF) 8 VDD = 20V 2 500 f = 1MHz VGS = 0V 400 COSS 300 200 100 0 0 2 4 6 Qg, GATE CHARGE(nC) 8 10 CRSS 0.1 Figure 7. Gate Charge Characteristics 10 30 Figure 8. Capacitance vs Drain to Source Voltage 8 ID, DRAIN CURRENT (A) IAS, AVALANCHE CURRENT (A) 20 10 O STARTING TJ = 25 C O STARTING TJ = 125 C 1 0.01 0.1 7 6 VGS=10V 5 4 VGS=4.5V 3 2 1 1 10 0 25 20 10us 0.1 0.01 0.1 100 125 150 100us 1ms OPERATION IN THIS AREA MAY BE LIMITED BY rDS(on) 10ms 100ms 1s SINGLE PULSE TJ = MAX RATED TA = 25oC DC 1 10 VDS, DRAIN TO SOURCE VOLTAGE (V) 100 Figure 11. Forward Bias Safe Operating Area Figure 10. Maximum Continuous Drain Current vs Ambient Temperature P(PK), PEAK TRANSIENT POWER (W) 100 1 75 TA, AMBIENT TEMPERATURE ( C) Figure 9. Unclamped Inductive Switching Capability 10 50 o tAV, TIME IN AVALANCHE (mS) ID, DRAIN CURRENT (A) 1 VDS, DRAIN TO SOURCE VOLTAGE (V) 3000 TA = 25oC 1000 FOR TEMPERATURES ABOVE 25oC DERATE PEAK CURRENT AS FOLLOWS: 100 150 - T A -----------------------125 I = I25 VGS=10V 10 SINGLE PULSE 1 -5 10 -4 10 -3 10 -2 -1 0 1 10 10 10 10 t, PULSE WIDTH (s) 2 10 Figure 12. Single Pulse Maximum Power Dissipation www.onsemi.com 4 3 10 FDS8984-F085 N-Channel PowerTrench(R) MOSFET Typical Characteristics TJ Normalized Thermal Impedance ZJA 2 1 0.1 = 25C unless otherwise noted DUTY CYCLE - DESCENDING ORDER D = 0.5 0.2 0.1 0.05 0.02 0.01 PDM 0.01 t1 1E-3 1E-4 -5 10 t2 SINGLE PULSE -4 10 -3 10 NOTES: DUTY FACTOR: D = t1/t2 PEAK TJ = PDM x ZJA x RJA + TA -2 10 -1 10 0 10 t, RECTANGULAR PULSE DURATION(s) Figure 13. Transient Thermal Response Curve www.onsemi.com 5 1 10 2 10 3 10 FDS8984-F085 N-Channel PowerTrench(R) MOSFET Typical Characteristics TJ ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com