Click on Series name for product info on aimtec.com Series AM1DC-Z 1 Watt | DC-DC Converter FEATURES: * RoHS compliant SIP7 package * Physical clearance of Isolation barrier 2.5mm * High efficiency up to 81% * I/O Isolation 6000 VDC * Low isolation capacitance * * * Safety barrier 100% production tested Rated working voltage of 250 Vrms Continuous Short Circuit Protection Models Single output Model AM1DC-0503SH60Z AM1DC-0505SH60Z AM1DC-0509SH60Z AM1DC-0512SH60Z AM1DC-0515SH60Z AM1DC-0903SH60Z AM1DC-0905SH60Z AM1DC-0909SH60Z AM1DC-0912SH60Z AM1DC-0915SH60Z AM1DC-1203SH60Z AM1DC-1205SH60Z AM1DC-1209SH60Z AM1DC-1212SH60Z AM1DC-1215SH60Z AM1DC-1503SH60Z AM1DC-1505SH60Z AM1DC-1509SH60Z AM1DC-1512SH60Z AM1DC-1515SH60Z AM1DC-2403SH60Z AM1DC-2405SH60Z AM1DC-2409SH60Z AM1DC-2412SH60Z AM1DC-2415SH60Z Input Voltage (V) Output Voltage (V) Output Current Max (mA) Max Capacitive Load (uF) Efficiency (%) 5 5 5 5 5 9 9 9 9 9 12 12 12 12 12 15 15 15 15 15 24 24 24 24 24 3.3 5 9 12 15 3.3 5 9 12 15 3.3 5 9 12 15 3.3 5 9 12 15 3.3 5 9 12 15 303 200 111.1 83.3 66.7 303 200 111.1 83.3 66.7 303 200 111.1 83.3 66.7 303 200 111.1 83.3 66.7 303 200 111.1 83.3 66.7 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 71 75 77 76 77 72 75 77 78 78 70 74 76 76 76 73 77 80 80 79 70 71 70 72 73 Input Voltage (V) Output Voltage (V) Output Current max (mA) Max Capacitive Load (uF) Efficiency (%) 5 5 5 5 5 5 3.3 5 9 12 15 +15/-9 151.5 100 55.6 41.7 33.3 +33/-55 100 100 100 100 100 100 73 75 79 77 77 9 9 9 9 9 9 3.3 5 9 12 15 +15/-9 151.5 100 55.6 41.7 33.3 +33/-55 100 100 100 100 100 100 12 12 12 3.3 5 9 151.5 100 55.6 100 100 100 Models Dual output Model AM1DC-0503DH60Z AM1DC-0505DH60Z AM1DC-0509DH60Z AM1DC-0512DH60Z AM1DC-0515DH60Z AM1DC051509DH60Z AM1DC-0903DH60Z AM1DC-0905DH60Z AM1DC-0909DH60Z AM1DC-0912DH60Z AM1DC-0915DH60Z AM1DC091509DH60Z AM1DC-1203DH60Z AM1DC-1205DH60Z AM1DC-1209DH60Z www.aimtec.com F 051e R6.I Tel: +1 514 620 2722 1 of 5 76 73 77 79 77 79 78 72 73 77 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DC-Z 1 Watt | DC-DC Converter AM1DC-1212DH60Z AM1DC-1215DH60Z 12 12 12 15 41.7 33.3 100 100 74 76 Input Voltage (V) Output Voltage (V) Output Current max (mA) Max Capacitive Load (uF) Efficiency (%) 12 +15/-9 +33/-55 100 15 15 15 15 15 15 3.3 5 9 12 15 +15/-9 151.5 100 55.6 41.7 33.3 +33/-55 100 100 100 100 100 100 24 24 24 24 24 24 3.3 5 9 12 15 +15/-9 151.5 100 55.6 41.7 33.3 +33/-55 100 100 100 100 100 100 Models Dual output (continued) Model AM1DC121509DH60Z AM1DC-1503DH60Z AM1DC-1505DH60Z AM1DC-1509DH60Z AM1DC-1512DH60Z AM1DC-1515DH60Z AM1DC151509DH60Z AM1DC-2403DH60Z AM1DC-2405DH60Z AM1DC-2409DH60Z AM1DC-2412DH60Z AM1DC-2415DH60Z AM1DC241509DH60Z 76 75 79 81 80 80 84 68 69 73 72 75 74 *Output ripple and noise are measured without external connection of filtering capacitors. For reducing these values please refer to the recommended circuit below. Input Specifications Parameters Voltage range Nominal Typical 5 9 12 15 24 4.5-5.5 8.1-9.9 10.8-13.2 13.5-16.5 21.6-26.4 Filter Turn on Transient process time Start up time Absolute Maximum Rating Rise time Input Reflected Ripple current www.aimtec.com F 051e R6.I Units VDC Capacitor 5 Vin 9 Vin 12 Vin 15 Vin 24 Vin 5 Vin 9 Vin 12 Vin 15 Vin 24 Vin 5 Vin 9 Vin 12 Vin 15 Vin 24 Vin 760 530 300 300 280 2.8 2.5 2.3 2.3 2.24 0-7 0-12 0-15 0-18 0-28 5 Vin 9 Vin 12 Vin 15 Vin 24 Vin 5 Vin 9 Vin 12 Vin 15 Vin 24 Vin Thru 12H inductor, 5Hz to 20MHz 40 30 20 15 10 180 190 200 190 180 20 Peak Input Voltage time Quiescent Current Maximum s ms VDC 100 Tel: +1 514 620 2722 2 of 5 ms mA s mA rms Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DC-Z 1 Watt | DC-DC Converter Isolation Specifications Parameters Tested I/O voltage (rated for 1 min) Rated working voltage Resistance Capacitance Conditions Typical Rated Units 6000 VDC V rms MOhm pF Maximum Units Flash tested for 3sec. 250 >1000 10 Output Specifications Parameters Voltage accuracy Voltage balance (Dual output model) Short Circuit protection Short circuit restart Line voltage regulation Load voltage regulation Temperature coefficient Ripple and Noise Conditions Typical 3 1 Continuous Auto recovery 1.2 Balanced Load For 1% change of V in AM1DC-0503DH60Z AM1DC-1203SH60Z From 10 to 100% load Other models, From 10 to 100% load % % % 12 % 10 200 %/oC mV p-p Maximum Units 0.03 20MHz Bandwidth General Specifications Parameters Switching frequency Clearance Distance Operating temperature Storage temperature Maximum case temperature Cooling Humidity Case material Soldering temperature Weight Dimensions (L x W x H) MTBF Conditions Typical 100% load, depending of the model Input to Output Full Load without Derating 20 - 50 2.5 -40 to +85 -40 to +125 100 KHz mm oC oC oC Free air convection 95 Non-conductive black plastic, epoxy encapsulated (UL94V-0 rated) 1.5mm from case for 10 sec. 260 4.3 0.77 x 0.39 x 0.49 inches 19.50 x 9.80 x 12.50 mm >2 390 000 hrs (MIL-HDBK-217 F at +25 oC) % RH oC g NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Safety Specifications Parameters Standards www.aimtec.com F 051e R6.I EN 55032, Class B IEC 61000-4-2: 2008, Criteria A IEC 61000-4-3: 2010, Criteria A IEC 61000-4-4: 2012, Criteria A IEC 61000-4-6: 2008, Criteria A IEC 61000-4-8: 2009, Criteria A Designed to meet IEC 60950-1: 2001 Tel: +1 514 620 2722 3 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DC-Z 1 Watt | DC-DC Converter Pin Out Specifications Pin Dimensions 19.50 (0.77) 6000 VDC Single + V Input - V Input - V Output No pin + V Output 1 2 5 6 7 Dual + V Input - V Input - V Output Common + V Output 9.80 (0.39) PRINTED FACE 12.50 (0.49) 12.00 (0.47) 0.50 (0.02) 3.50 (0.14) 2.54 (0.10) 15.20 (0.60) 0.50 (0.02) 9.80 (0.39) 0.50 (0.02) 0.25 (0.01) 2.40 (0.09) Recommended Application circuit for reducing the output ripple and noises: Recommended Output Capacitor to reduce the converter's ripple and noises for single output models is 4.7F to 100F and for dual output models is 4.7F to 68F connected to both outputs. Li with value of 12H and Ci with value 10F to 100F are recommended to be connected to the input of the converter for EMI improvement. EMI Filter Circuit Example L1 + C1 C2 Vin- Vo+ Aimtec DC-DC Converter - Load Vin+ Vo- C3 Vin C1 5, 9, 12, 15 V 2.2 F / 100V 24 V 2.2 F / 100V * Electrolytic type www.aimtec.com F 051e R6.I L1 C2 C3 18 H 18 H 2.2 F / 100V 470 pF / 2kV Tel: +1 514 620 2722 4 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DC-Z 1 Watt | DC-DC Converter NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec's standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R6.I Tel: +1 514 620 2722 5 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only