3MTM Shielded Controlled Impedance (SCI) .100 Cable Assemblies * .100 inch (2.54 mm) center spacing * Mates with standard 3M two-pin headers * Supplied as a completed assembly Stand-Alone version * Available in right angle and straight configurations with optional polarization feature * Right angle connector has optional two-pin header latch Carrier version * Available only in straight configuration designed for use with the 3M SCI carrier system Date Modified: September 23, 2005 TS-0803-05 Sheet 1 of 3 Physical (Connector Insulation) Material: Thermoplastic Flammability: UL 94V-0 (Connector Contact) Material: Beryllium Copper Plating: 50/50 Au/Ni (1.27/1.27 m Au/Ni) (Connector Shieldbox) Material: Copper Zinc Alloy Plating: Solderable Nickel Electrical Current Rating: 1 A Insulation Resistance: >5 x 109 Withstanding Voltage: 500 V AC Characteristic Impedance: See cable types Mechanical Center Spacing: .100 (2.54 mm) Mating Pin Dimensions: .024 min/.026 max (0.61 mm/0.665 mm) Mating Pin Length 20, 21, 22, 23: .23 nom (5.80 mm); 24: .21 nom (5.02 mm) Contact Mating Point 20, 21, 22, 23: .13 (3.40 mm); 24: .10 (2.60 mm) Connector Insertion Force: 2.3 N max [Pin:0.025 (0.63 mm)] Connector Withdrawel Force: 1.5 N min [Pin:0.025 (0.63 mm)] Cable Retention Force: 50 N min Durability (Insertion/Withdrawal): 500 cycles Environmental Temperature Rating: 22, 23: -55 to +105C; 24: -55 to +125C UL File No.: E86982 (Optional) 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Shielded Controlled Impedance (SCI) .100 Cable Assemblies Connector Types Carrier Version Type 24 Stand Alone Version Type 23 .604 [ 15.35 ] .604 [ 15.35 ] .082 [ 2.08 ] .174 [ 4.43 ] .088 [ 2.25 ] .012 [ 0.30 ] Ground .174 [ 4.43 ] .11 [ 2.80 ] Ground Signal .073 [ 1.85 ] .100 [ 2.54 ] .039 [ 1.0 ] Signal .100 [ 2.54 ] Inch [mm] Tolerance Unless Noted Inch Right Angle Version Type 22 .0 .00 .000 .1 .01 .005 [ ] Dimensions for Reference only .063 [ 1.60 ] .472 [ 12.00 ] Example Assembly .174 [ 4.43 ] .088 [ 2.25 ] .012 [ 0.30 ] .039 [ 1.0 ] Signal Ground Length Assembly Tolerances: <10:1/4 10 to 36: 1/2 36 to 120: 1 >120:2 Minimum Length: 4.3 .100 [ 2.54 ] Ordering Information 98XXXX-XXX-XXX.X-X X X Left Connector Type/Right Connector Type 22 = Right angle, nonpolarized 23 = Straight, nonpolarized 24 = Carrier version, straight Cable Type 017 = 50 027 = 50 Low capacitance 041 = 75 XXX = For other cable options contact 3M (if non standard) 3M Interconnect Solutions http://www.3M.com/interconnects/ Length (inches) USA and Canadian Certification Y = Yes N = No Ground Pattern S = Signals as indicated on connector dwg Z = Customer special ground pattern (Consult Factory) Harness Required A = Multiple Assy's Harnessed 0 = Single Assembly Only TS-0803-05 Sheet 2 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Shielded Controlled Impedance (SCI) .100 Cable Assemblies Cable Specification B A C A C D B D Physical Properties (TYP) Cable Type A Center Conductor B Dielectric Material C Shield D Jacket 017 50 5 30 AWG SCCCS Stranded (7/38) .012 O.D. (0.30 mm O.D.) PTFE .033 O.D. (0.84 mm O.D.) 38 AWG Braid (SPC) 95% nominal coverage .059 O.D. (1.50 mm O.D.) FEP Natural Color .071 O.D. (1.80 mm O.D.) 027 50 2 26 AWG SPC Stranded (7/34) .019 O.D. (0.48 mm O.D.) AIR/FEP Tube .044 O.D. (1.1 mm O.D.) 38 AWG (SPC) Double Serve FEP Blue Color .074 O.D. (1.88 mm O.D.) 041 75 3 30 AWG SPC Stranded (7/38) .012 O.D. (0.30 mm O.D.) FEP (Porous) .045 O.D. (1.14 mm O.D.) 40 AWG Braid (TPC) 90% min coverage .059 O.D. (1.50 mm O.D.) FEP Gray Color .074 O.D. (1.88 mm O.D.) SCCCS = Silver Coated Copper Covered Steel SPC = Silver Plated Copper TPC = Tin Plated Copper Electrical Properties (TYP) Cable Type Capacitance Propagation Delay Attenuation Conductor Resistance 017 50 5 32 pf/ft max (105 pf/m) 1.46 ns/ft nominal (4.8 ns/m ) 33 dB Max/100 ft @ 400 MHz (108 dB/ 100 m) .24 /ft at 68F (0.8 /m at 20C) 027 50 2 23 pf/ft nom (75 pf/m) 1.15 ns/ft nominal (3.77 ns/m ) 20 dB /100ft @ 400 MHz Nom (65 dB/100 m) .041 /ft at 68F (.15 /m at 20C) 041 75 3 16 pf/ft max (52 pf/m) 1.22 ns/ft nominal (4.0 ns/m ) 10 dB Max/100 ft @ 100 MHz (33 dB/100 m) .09 /ft at 68F (0.3 /m at 20C) TS-0803-05 Sheet 3 of 3 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electronics 6801 River Place Blvd. Austin, TX 78726-9000 800/328-1368 www.3M.com/electronics Minimum 10% Post-Consumer Fiber Printed in USA. (c) 3M 2005