3MTM CP2 Press-Fit Socket 2 mm Type A 110 Signal Contacts Right Angle CP2 Series * 25mm basic system unit * 50mm module * Designed according to IEC 61076-4-101 and IEC 60352-5 Standards * 2 mm grid spacing allows for high signal density at low cost * "Eye of the Needle" compliant pin press-fit design reduces manufacturing time and cost * Additional grounding row available for improved ground bounce and EMI immunity * Mates with 5 row 3MTM MetPakTM HM, and CP2 headers * End-to-end stackable with 5 row 3MTM MetPakTM HSHM, HM, and CP2 sockets * See Regulatory Information Appendix (RIA) for chemical compliance information Date Modified: February 15, 2008 TS-2266-A Sheet 1 of 2 Physical Insulation: Material: High Temperature Thermoplastic (LCP) Flammability: UL94V-0 Contact: Material: Copper Alloy Plating: See Ordering Information Mechanical Mating Force: 0.75N/PIN Withdrawl Force: 0.15N/PIN Mating and Un-mating Operations: 50 Electrical Contact Resistance: 20 m Insulation Resistance: 10,000 M Test Voltage: 750 VACRMS Environmental Temperature Ratings: -55C to +125C PCB Data Recommended PCB Plated Through Hole: 0.60.05 mm Drill Hole Diameter: 0.70.02 mm Hole platings: Cu 25~50 m, Sn or SnPb<10 m PCB thickness: 1.4-4.2 mm Press-In Force: 204N/pin on nominal hole diameter Retention Force: 13.5N/pin on nominal hole diameter 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM CP2 Press-Fit Socket 2 mm Type A 110 Signal Contacts Right Angle CP2 Series mm [Inch] Tolerance Unless Noted 0. mm 1 .0 .00 0.3 0.13 [ ] Dimensions for Reference only Recommended PCB Layout Ordering Information CP2-SA110-X1-XXXX Shield Options G= Upper Shield Blank= No Shield Plating Options TG30= 30~40 " Gold Contact Area 100~200 " Bright Tin-Lead 50~80 " Nickel Underplate (RIA E2 & C2 apply) FJ= 10~20 " Gold Contact Area 200~300 " Matte Tin 50~80 " Nickel Underplate (RIA E1 & C1 apply) KR= 30~40 " Gold Contact Area 200~300 " Matte Tin 50~80 " Nickel Underplate (RIA E1 & C1 apply) * This diagram serves only for Part Number descriptive definitions. PLEASE CONTACT YOUR LOCAL SALES REPRESENTATIVE FOR CUSTOMER SPECIFIC PROGUCT CONFIGURATIONS. 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ TS-2266-A Sheet of 2 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373