LITE-ON DCC
RELEASE
BNS-OD-FC001/A4
LITE-ON Technology Corp. / Optoelectronics
No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C.
Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660
http://www.liteon.com/opto
Photocoupler
Product Data Sheet
CNY17-1 THRU CNY17-4
SERIES
Spec No. :DS-70-99-0001
Effective Date: 07/25/2018
Revision: D
1/15
Photocoupler
CNY17-1 THRU CNY17-4 SERIES
Part No: CNY17-1 THRU CNY17-4
SERIES
BNC-OD-C131/A4
Rev.: D
1. DESCRIPTION
1.1 Features
Current transfer ratio (CTR : MIN. 40% at I
F
= 10mA, V
CE
= 5V)
High collector-emitter voltage
V
CEO
= 70V
High input-output isolation voltage
Viso = 5,000Vrms
Response time (tr : TYP. 5µs at VCE = 10V, IC = 2mA, RL = 100Ω)
Dual-in-line package:
CNY17-1, CNY17-2, CNY17-3, CNY17-4
Wide lead spacing package:
CNY17-1M, CNY17-2M, CNY17-3M, CNY17-4M
Surface mounting package:
CNY17-1S, CNY17-2S, CNY17-3S, CNY17-4S
Tape and reel packaging:
CNY17-1S-TA, CNY17-2S-TA, CNY17-3S-TA, CNY17-4S-TA
CNY17-1S-TA1, CNY17-2S-TA1, CNY17-3S-TA1, CNY17-4S-TA1
Safety approval
* UL approved (No. E113898)
* TUV approved (No. R9653630)
* CSA approved (No. CA91533-1)
* FIMKO approved (No. 193422-01)
* VDE approved (No. 40015248)
* BSI approved (No. 9018-9)
* CQC approved (No. CQC11001061921-2)
Creepage distance > 8.0 mm ; Clearance > 8.0 mm
The relevant models are the models Approved by VDE according to DIN EN 60747-5-5
Approved Model No.:
CNY17-1-V, CNY17-2-V, CNY17-3-V, CNY17-4-V
CNY17-1M-V, CNY17-2M-V, CNY17-3M-V, CNY17-4M-V
CNY17-1S-V, CNY17-2S-V, CNY17-3S-V, CNY17-4S-V
CNY17-1S-TA-V, CNY17-2S-TA-V, CNY17-3S-TA-V, CNY17-4S-TA-V
CNY17-1S-TA1-V, CNY17-2S-TA1-V, CNY17-3S-TA1-V, CNY17-4S-TA1-V
VDE approved No.: 40015248 (According to the specification DIN EN 60747-5-5)
Operating isolation voltage VIORM : 850V (Peak)
Transient voltage VTR : 6000V (Peak)
Pollution : 2 (According to VDE 0110-1 : 1997-04)
Clearances distance (Between input and output) : 7.0mm (MIN.)
Creepage distance (Between input and output) : 7.0mm (MIN.)
Isolation thickness between input and output : 0.4mm (MIN.)
2/15
Photocoupler
CNY17-1 THRU CNY17-4 SERIES
Part No: CNY17-1 THRU CNY17-4
SERIES
BNC-OD-C131/A4
Rev.: D
Safety limit values Current (Isi) : 400mA (Diode side)
Power (Psi) : 700mW (Phototransistor side)
Temperature(Tsi) : 175
o
C
In order to keep safety electric isolation of photocoupler, please set the protective
circuit to keep within safety limit values when the actual application equipment troubled.
Indication of VDE approval prints " " on sleeve package.
RoHS Compliance
All materials be used in device are followed EU RoHS directive (No.2002/95/EC).
ESD pass HBM 8000V/MM2000V
MSL class1
1.2 Applications
Power Supply regulators
Digital logic inputs
Microprocessor inputs
Appliance Sensor Systems
Industrial Controls
3/15
Photocoupler
CNY17-1 THRU CNY17-4 SERIES
Part No: CNY17-1 THRU CNY17-4
SERIES
BNC-OD-C131/A4
Rev.: D
2. PACKAGE DIMENSIONS
2.1 CNY17-1, CNY17-2, CNY17-3, CNY17-4 :
2.2 CNY17-1M, CNY17-2M, CNY17-3M, CNY17-4M :
Notes :
1. 2-digit year code, example : 2016 = 16
2. 2-digit work week ranging from ‘01’ to ‘53’
3. Factory identification mark shall be marked (Y: Thailand, W: China-CZ, X: China-TJ).
4. Model No.: CNY17-1, CNY17-2, CNY17-3, CNY17-4
4/15
Photocoupler
CNY17-1 THRU CNY17-4 SERIES
Part No: CNY17-1 THRU CNY17-4
SERIES
BNC-OD-C131/A4
Rev.: D
2.3 CNY17-1S, CNY17-2S, CNY17-3S, CNY17-4S :
Notes :
1. 2-digit year code, example : 2016 = 16
2. 2-digit work week ranging from ‘01’ to ‘53’
3. Factory identification mark shall be marked (Y: Thailand, W: China-CZ, X: China-TJ).
4. Model No.: CNY17-1, CNY17-2, CNY17-3, CNY17-4
5/15
Photocoupler
CNY17-1 THRU CNY17-4 SERIES
Part No: CNY17-1 THRU CNY17-4
SERIES
BNC-OD-C131/A4
Rev.: D
2. TAPING DIMENSIONS
CNY17-1S-TA, CNY17-2S-TA, CNY17-3S-TA, CNY17-4S-TA :
CNY17-1S-TA1, CNY17-2S-TA1, CNY17-3S-TA1, CNY17-4S-TA1 :
Description Symbol Dimension in mm (inch)
Tape wide W 16±0.3 (0.63)
Pitch of sprocket holes P
0
4±0.1 (0.15)
Distance of compartment F 7.5±0.1 (0.295)
P
2
2±0.1 (0.079)
Distance of compartment to compartment P
1
12±0.1 (0.472)
6/15
Photocoupler
CNY17-1 THRU CNY17-4 SERIES
Part No: CNY17-1 THRU CNY17-4
SERIES
BNC-OD-C131/A4
Rev.: D
4. RATING AND CHARACTERISTICS
4.1 Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Rating Unit
Input
Forward Current I
F
60 mA
Reverse Voltage V
R
6 V
Power Dissipation P 100 mW
Junction Temperature T
J
125
°
C
Output
Collector - Emitter Voltage V
CEO
70 V
Emitter - Collector Voltage V
ECO
7 V
Collector - Base Voltage V
CBO
70 V
Collector Current I
C
150 mA
Collector Power Dissipation P
C
150 mW
Total Power Dissipation P
tot
250 mW
*1 Isolation Voltage V
iso
5000 V
rms
Operating Temperature T
opr
-55 ~ +100
°
C
Storage Temperature T
stg
-55 ~ +150
°
C
*2 Soldering Temperature T
sol
260
°
C
*1. AC For 1 Minute, R.H. = 40 ~ 60%
Isolation voltage shall be measured using the following method.
(1) Short between anode and cathode on the primary side and between collector and emitter on the
secondary side.
(2) The isolation voltage tester with zero-cross circuit shall be used.
(3) The waveform of applied voltage shall be a sine wave.
*2. For 10 Seconds
7/15
Photocoupler
CNY17-1 THRU CNY17-4 SERIES
Part No: CNY17-1 THRU CNY17-4
SERIES
BNC-OD-C131/A4
Rev.: D
*
CTR
I
I100%
C
F
= ×
4.2
ELECTRICAL OPTICAL CHARACTERISTICS at Ta=25°C
PARAMETER SYMBOL
MIN.
TYP.
MAX.
UNIT
CONDITIONS
INPUT
Forward Voltage VF — 1.45
1.65
V IF=60mA
Reverse Current IR — — 10 µA
VR=6V
Terminal Capacitance Ct — — 100
pF
V=0, f=1KHz
OUTPUT
Collector Dark Current ICEO — — 50 nA
VCE=10V, IF=0
Collector-
Emitter
Breakdown Voltage BVCEO 70 — — V
IC=0.1mA
IF=0
Emitter-Collector Breakdown
Voltage BVECO 7 — — V IE=10µ
A
IF=0
Collector-
Base
Breakdown Voltage BVCBO 70 — — V
IC=0.1mA
IF=0
TRANSFER
CHARACTERISTICS
Current
*Transfer
Ratio
CNY17-1
CTR
40 — 80
% IF=10mA
VCE=5V
CNY17-2
63 125
CNY17-3
100
200
CNY17-4
160
— 320
Collector-
Emitter
Saturation Voltage VCE(sat)
— — 0.3 V IF=1
0mA
IC=2.5mA
Isolation Resistance Riso 100
— — GΩ
DC500V
40 ~ 60% R.H.
Floating Capacitance Cf — — 2 pF
V=0, f=1MHz
Response Time (Rise) tr — 5 10 µs VCE=10V, IC=2mA
RL=100Ω
Response Time (Fall) tf — 5 10 µs
8/15
Photocoupler
CNY17-1 THRU CNY17-4 SERIES
Part No: CNY17-1 THRU CNY17-4
SERIES
BNC-OD-C131/A4
Rev.: D
4.3 ISOLATION SPECIFICATION ACCORDING TO VDE
Parameter Symbol Conditions Rating Unit Remark
Class of environmental test - DIN IEC68 55/100/21 -
Pollution - DIN VDE0110 2 -
Maximum Operating
Isolation Voltage V
IORM
- 850 V
PEAK
Refer to the Diagram
1, 2
Partial Discharge Test
Voltage (Between Input
and Output)
Diagram 1
Vpr
tp=60s, qc<5pC 1275 V
PEAK
Diagram 2 tp=1s, qc<5pC 1594 V
PEAK
Maximum Over-voltage V
INITIAL
t
INI
= 10s 6000 V
PEAK
Safety Maximum Ratings
Refer to the
Figure 1, 3
1) Case Temperature Tsi I
F
= 0, Pc = 0 175
o
C
2) Input Current Isi Pc=0 400 mA
3) Electric Power (Output or Total
Power Issipation) Psi - 700 mW
Isolation Resistance
(Test Voltage Between
Input and Output : DC500V)
R
ISO
Ta=Tsi MIN.10
9
Ω
Ta=Topr(MAX.) MIN.10
11
Ta=25
o
C MIN.10
12
Precautions in performing isolation test
* Partial discharge test methods shall be the ones according to the specifications of DIN EN 60747-5-5
* Please don't carry out isolation test (Viso) over V
INITIAL
,This product deteriorates
isolation characteristics by partial discharge due to applying high voltage
(ex. V
INITIAL
). And there is possibility that this product occurs partial discharge in
operating isolation voltage (V
IORM
)
9/15
Photocoupler
CNY17-1 THRU CNY17-4 SERIES
Part No: CNY17-1 THRU CNY17-4
SERIES
BNC-OD-C131/A4
Rev.: D
4.4 PARTIAL DISCHARGE TEST METHOD
t2t3
t
ini
t1 tp
tb t4
VV
INTIAL
pr
V
IORM
V
t
t3 tp
tb t4
V
pr
V
IORM
V
t
Method (A) for type testing and random testing.
Method (B) for routine testing.
t1, t2 = 1 to 10s
t3, t4 = 1s
tp (Partial Discharge Measuring Time)= 60s
tb = 62s
tini = 10s
t3, t4 = 0.1s
tp (Partial Discharge Measuring Time)= 1s
tb = 1.2s
The partial discharge level shall not exceed 5 pc during the partial discharge measuring time interval t
p
under the test
conditions shown above.
10/15
Photocoupler
CNY17-1 THRU CNY17-4 SERIES
Part No: CNY17-1 THRU CNY17-4
SERIES
BNC-OD-C131/A4
Rev.: D
5. CHARACTERISTICS CURVES
Fig.1 Forward Current vs. Fig.2 Collector Power Dissipation vs.
Ambient Temperature
Fig.4 Forward Current vs.
Fig.5 Current Transfer Ratio vs.
Forward Current Fig.6 Collector Current vs.
Collector-emitter Voltage
Forward voltage V (V)
Forward current I (mA)
F
FCE
F
Forward current I (mA)
F
-55
Ta= 75 C
50 C 25 C
0 C
-25 C
Ta= 25 C
I = 30mA
Pc(MAX.)
5mA
10mA
20mA
F
80
R =
500k 100k
2mA
Ambient Temperature
Forward current I (mA)
Ambient temperature Ta ( C) Ambient temperature Ta ( C)
Collector power dissipation Pc (mW)
Collector current Ic (mA)
Current transfer ratio CTR (%)
Collector-emitter voltage V (V)
60
40
20
0-25 0 25 50 75 100 125 50-25-55 0 25 12575 100
200
100
50
150
0
0
10.5 1.0 1.5 2.0 2.5 3.0
2
5
10
20
50
100
200
500
00 2 4 6 8 10
5
10
15
20
25
30
35
40
45
0
02 5 10 20 50
20
40
80
100
120
140
160
200
180
60
Forward Voltage
o
oo
o
o
o
o
o
o
Fig.3 Collector-emitter Saturation
Voltage vs. Forward Current
Forward current I (mA)
F
Collector-emitter saturation voltage
V (sat) (V)
2mA
3mA
1mA
5mA
Ic= 0.5mA Ta= 25 C
o
0 2.5 5.0 7.5 10.0 12.5
0
1
2
3
4
5
6
V
CE
= 5V
Ta= 25 C
11/15
Photocoupler
CNY17-1 THRU CNY17-4 SERIES
Part No: CNY17-1 THRU CNY17-4
SERIES
BNC-OD-C131/A4
Rev.: D
Fig.11 Frequency Response
Fig.9 Collector Dark Current vs.
Voltage gain Av (dB)
Frequency f (kHz)
-8
-100.5 1
-4
-2
-6
2 5 10 20
R = 200
50010050 200
150 75
Ambient temperature Ta ( C)
10
Collector dark current I (A)
2
0
10
10 -30
-13
-12
200 40
Ambient Temperature
10
10
10
10
CEO
-11
-10
-9
-8
10
-7
-6
100
Vcc= 5V
I = 10mA
Ta= 25 C
F
o
o
60 80
90%
Test Circuit for Frequency Response
Output
Vcc
td
tr tf
ts
Output
Test Circuit for Response Time
Load resistance R
L
(k )
Load Resistance
Fig.10 Response Time vs.
Response time (s)
1
0.5
0.02
Input
Vcc
0.05
10
5
2
Output
Input
0.1 0.2
10%
0.5
tr
tf
o
Fig.7 Relative Current Transfer Ratio vs.
Ambient temperature Ta ( C)
50
Relative current transfer ratio (%)
-55
0
100
0-25 25
Ambient Temperature
150
100
o
7550
vs. Ambient Temperature
Ambient temperature Ta ( C)
Fig.8 Collector-emitter Saturation Voltage
Collector-emitter saturation voltage
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0-55
V (sat) (V)
-25 0
0.16
7525 50 o100
R
D
R
L
R
D
R
L
I
F
= 10mA
V
CC
= 5V
Ta= 25 C
I
F
= 10mA
V
CE
= 5V I
F
= 10mA
I
C
= 2.5mA
V
CE
= 10V
12/15
Photocoupler
CNY17-1 THRU CNY17-4 SERIES
Part No: CNY17-1 THRU CNY17-4
SERIES
BNC-OD-C131/A4
Rev.: D
6. TEMPERATURE PROFILE OF SOLDERING
6.1 IR Reflow soldering (JEDEC-STD-020C compliant)
One time soldering reflow is recommended within the condition of temperature and time profile shown below. Do not solder more than three times.
Profile item Conditions
Preheat
- Temperature Min (T
Smin
)
- Temperature Max (T
Smax
)
- Time (min to max) (ts)
150˚C
200˚C
90±30 sec
Soldering zone
- Temperature (T
L
)
- Time (t
L
)
217˚C
60 sec
Peak Temperature (T
P
) 260˚C
Ramp-up rate 3˚C / sec max.
Ramp-down rate 3~6˚C / sec
60 ~ 120 sec
25 C
150 C
200 C
260 C
217 C
60 sec
Time (sec)
Temperature ( C)
20 sec
Tsmax
ts (Preheat)
tL (Soldering)
Tsmin
TL
TP
Ramp-down
Ramp-up
35~70 sec
13/15
Photocoupler
CNY17-1 THRU CNY17-4 SERIES
Part No: CNY17-1 THRU CNY17-4
SERIES
BNC-OD-C131/A4
Rev.: D
6.2 Wave soldering (JEDEC22A111 compliant)
One time soldering is recommended within the condition of temperature.
Temperature: 260+0/-5˚C
Time: 10 sec.
Preheat temperature:25 to 140˚C
Preheat time: 30 to 80 sec.
6.3 Hand soldering by soldering iron
Allow single lead soldering in every single process. One time soldering is recommended.
Temperature: 380+0/-5˚C
Time: 3 sec max.
14/15
Photocoupler
CNY17-1 THRU CNY17-4 SERIES
Part No: CNY17-1 THRU CNY17-4
SERIES
BNC-OD-C131/A4
Rev.: D
7. RRECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD)
Unit: mm
8. NAMING RULE
(2) TAPING TYPE (TA, TA1 or none)
Please refer to orientation of taping on Page P5
(1) No suffix = Dual-in-Line package
M = Wide lead spacing package
S = Surface mounting package
(3) VDE Option
FCNY17-X(1)-(2)-V
DEVICE PART NUMBER
(2) TAPING TYPE (TA, TA1 or none)
Please refer to orientation of taping on Page P5
(1) No suffix = Dual-in-Line package
M = Wide lead spacing package
S = Surface mounting package
FCNY17-X(1)-(2)
DEVICE PART NUMBER
15/15
Photocoupler
CNY17-1 THRU CNY17-4 SERIES
Part No: CNY17-1 THRU CNY17-4
SERIES
BNC-OD-C131/A4
Rev.: D
9. NOTES
LiteOn is continually improving the quality, reliability, function or design and Lite
On reserves the right to make changes without
further notices.
The products shown in this publication are designed for the general use in electronic
applications such as office automation
equipment, communications devices, audio/visual equipment, electrical application and instrumentation.
For equipment/devices where high reliability or safety is required, such as space
applications, nuclear power control equipment,
medical equipment, etc, please contact our sales representatives.
When requiring a device for any “specific” application, please contact our sales in advice.
If there are any questions about the contents of this publication, please contact us at your convenience.
The contents described herein are subject to change without prior notice.
Immerge unit’s body in solder paste is not recommended.
