Slim Relay G2RV Test switch type The only truly industrial 6 mm relay No test switch type * Lockable test switch models now available. * Large plug-in terminals for reliable connection. * LED indicator and mechanical flag for status indication. * Input type with gold plated contacts available. * Transparent housing allows inspection of contact condition. * Slim width to save space. * Push-in terminals and accessories for easy wiring. * Lloyd's approval LR PATENTED Features Test switch operation Protection cover: lock Protection cover: unlock Protection cover open Protection cover close Contact normal position Contact operated position (ON state) OMRON Lockable test switch can be used in this way: When the protection cover (located directly over the test switch) is closed, the test switch is retained in normal position (OFF state) by the protection cover. After opening the protection cover, the test switch can be unlocked. The test switch can then be moved to the operated position (ON state). After using the test switch, move it to the normal position (OFF state) and close the protection cover to prevent unwanted operation of the test switch. * Please check Precautions (Page. 17 : Precaution of test switch operation) when using test switch. Application of test switch: Example: Checking operation of Relays and sequence circuits. Slim Relay G2RV 1 Model Number Structure Model Number Legend G2RV-SL @ @ @ - @ - @ 1 2 3 4 5 6 4. Relay Test switch 0: No test switch type 1: Test switch type 5. Contact form AP: Input type Blank: Standard type 6. Input Voltage 1. Auxiliary Type Designation SL: Slim relay and socket combination 2. Wire Connection 7: Screw terminals 5: Push-in terminals 3. Relay LED 0: Without LED Note: LED indicator available on socket. Ordering Information List of Models Classification Enclosure rating Plug-in terminals General-purpose Unsealed Input voltage AC/DC Type of connection Test switch Contact form (SPDT) Standard type G2RV-SL700 Input type Screw terminals No G2RV-SL700-AP Yes G2RV-SL701 --- Push-in terminals No G2RV-SL500 G2RV-SL500-AP Yes G2RV-SL501 --- Relay and Socket Combinations No test switch type Input voltage Contact form (SPDT) Standard type (No test switch type) Screw terminals 12 VDC G2RV-SL700 12 VDC 24 VDC 24 VAC/DC Input type (No test switch type) Push-in terminals Screw terminals Push-in terminals G2RV-SL500 12 VDC G2RV-SL700-AP 12 VDC G2RV-SL500-AP 12 VDC G2RV-SL700 24 VDC G2RV-SL500 24 VDC G2RV-SL700-AP 24 VDC G2RV-SL500-AP 24 VDC G2RV-SL700 24 VAC/DC G2RV-SL500 24 VAC/DC G2RV-SL700-AP 24 VAC/DC G2RV-SL500-AP 24 VAC/DC 48 VAC/DC G2RV-SL700 48 VAC/DC G2RV-SL500 48 VAC/DC G2RV-SL700-AP 48 VAC/DC G2RV-SL500-AP 48 VAC/DC 110 VAC G2RV-SL700 110 VAC G2RV-SL500 110 VAC G2RV-SL700-AP 110 VAC G2RV-SL500-AP 110 VAC 230 VAC G2RV-SL700 230 VAC G2RV-SL500 230 VAC G2RV-SL700-AP 230 VAC G2RV-SL500-AP 230 VAC Test switch type Input voltage Contact form (SPDT) Standard type (Test switch type) Screw terminals Input type (Test switch type) Push-in terminals Screw terminals Push-in terminals 24 VDC G2RV-SL701 24 VDC G2RV-SL501 24 VDC --- --- 24 VAC/DC G2RV-SL701 24 VAC/DC G2RV-SL501 24 VAC/DC --- --- 2 Slim Relay G2RV Specifications Input Ratings Rated current*1 Rated voltage AC 50 Hz Must operate voltage DC Must release voltage Power consumption % of rated voltage AC (VA) Approx. 60 Hz 80% 10% DC (mW) Approx. 12 VDC --- --- 27.2 mA 24 VDC --- --- 13.3 mA --- 300 mW --- 300 mW 24 VAC/DC 21.1 mA 22.5 mA 13.0 mA 0.5 VA 300 mW 48 VAC/DC 8.5 mA 9.0 mA 5.2 mA 0.4 VA 250 mW 110 VAC 7.1 mA 7.5 mA --- 0.8 VA --- 230 VAC 7.3 mA 7.9 mA --- 1.7 VA --- Input voltage % of rated voltage 10% *1) Rated currents are measured at 23 degrees Celsius (ambient) Contact Ratings Item Input type (G2RV-SL700-AP, 500-AP)*2 Standard type (G2RV-SL700, 500, 701, 501) Number of poles 1 pole Load Resistive load (cos = 1) Inductive load (cos = 0.4, L/R = 7 ms) Resistive load (cos = 1) Rated load 6 A at 250 VAC; 6 A at 30 VDC 2.5 A at 250 VAC; 2 A at 30 VDC 50 mA at 30 VAC; 50 mA at 36 VDC Rated carry current 6A 50 mA Max. switching voltage 400 VAC, 125 VDC 30 VAC, 36 VDC Max. switching current 6A Max. switching power 1,500 VA 180 W Failure rate (reference value)*1 50 mA 500 VA 60 W 10 mA at 5 VDC (P level) ---- 1 mA at 100 mVDC (P level) *1) P level: 60 = 0.1 x 10 /operation *2) If a gold layer is destroyed, contact ratings of standard type are applicable. -6 Characteristics Item Standard type (G2RV-SL700, 500, 701, 501) Input type (G2RV-SL700-AP, 500-AP) Contact resistance 100 m max. Operate (set) time 20 ms max. Release time 40 ms max. Max. operating frequency Mechanical: 18,000 operations/hr Electrical: 1,800 operations/hr (under rated load) Insulation resistance 1,000 M min. (at 500 VDC) Dielectric strength 4,000 VAC, 50/60 Hz for 1 min between coil and contacts*; 1,000 VAC, 50/60 Hz for 1 min between contacts of same polarity Vibration resistance Destruction: 10 to 55 to 10 Hz, 0.50 mm single amplitude (1.0 mm double amplitude) Malfunction: 10 to 55 to 10 Hz, 0.50 mm single amplitude (1.0 mm double amplitude) Shock resistance Destruction: 1,000 m/s2 Malfunction: 200 m/s2 when energized; 100 m/s2 when not energized Endurance Mechanical: 5,000,000 operations min. Electrical: 100,000 Typical; NO 70,000 operations min. ; NC 50,000 operations min. Ambient temperature Operating: -40C to 55C (with no icing or condensation) Ambient humidity Operating: 5% to 85% Weight Approx. 35 g Overvoltage category III Pollution degree 2 Contact material AgSnIn Creepage distance 7.0 mm Clearance distance 5.5 mm Mechanical: 5,000,000 operations min. Electrical: 5,000,000 operations min. AgSnIn + Gold Plating Note: Values in the above table are the initial values. Slim Relay G2RV 3 Approved Standards UL 508 (File No. E41643) Model G2RV-SL Series Contact form Coil ratings SPDT Contact ratings 12 to 48 VDC 24 to 230 VAC Operations 250 VAC 6 A (Resistive Load) 30 VDC 6 A (Resistive Load) 400 VAC 2 A (Resistive Load) 6,000 IEC/VDE (EN 61810) Contact form SPDT Coil ratings Contact ratings 12, 24 VDC 24, 48 VAC/DC 110, 230 VAC Operations 250 VAC 6 A (Resistive Load) 30 VDC 6 A (Resistive Load) 400 VAC 2 A (Resistive Load) 50,000 50,000 6,000 Lloyd's (File No. 07/10027 (E2)) Model G2RV-SL Series Contact form Coil ratings SPDT Contact ratings 250 VAC 6 A (Resistive load) 250 VAC 2.5 A (PF0.4) 30 VDC 6 A (Resistive load) 30 VDC 2 A (L/R=7ms) 12, 24 VDC 24, 48 VAC/DC 110, 230 VAC Engineering Data Switching capacity of DC resistive load 10,0 1000 DC Breaking Current (A) Endurance (x 103 operations) Endurance 30VDC resistive load 250VAC resistive load 100 30VDC inductive load (L/R=7ms) 250VAC inductive load (cos = 0.4) 1,0 0,1 10 20 0 2 6 4 60 100 140 180 Switching voltage (VDC) Switching current (A) Typical Operating and Release Time Model number Operating time (typical) Release time (typical) G2RV-SL7@@/5@@ DC12 5 ~ 7 ms G2RV-SL7@@/5@@ DC24 5 ~ 7 ms 6 ~ 9 ms G2RV-SL7@@/5@@ AC/DC24 5 ~ 7 ms 17 ~ 22 ms G2RV-SL7@@/5@@ AC/DC48 5 ~ 8 ms 5 ~ 7 ms 22 ~ 30 ms G2RV-SL7@@/5@@ AC110 12 ~ 15 ms 22 ~ 30 ms G2RV-SL7@@/5@@ AC230 12 ~ 15 ms 22 ~ 30 ms 4 Slim Relay G2RV 220 Accessories PLC Interface P2RVC-8-@-F Contact form Relay PLC Interface Standard type G2RV-SL70@ series P2RVC-8-O-F Input type G2RV-SL700-AP series P2RVC-8-I-F P2RVC-8-O-F (for G2RV-SL70@ series only) List of Models Model number P2RVC-8-O-F Description Connection PLC Output Interface for 8x G2RV-SL70@-series PNP - type Ribbon cable connector 10 Pole, IEC603/1 Specifications Input Electrical schematic P2RVC-8-O-F Rated voltage 30 VAC/VDC max. Current capacity 0.5 A per channel 2.0 A total current, power supply terminal Characteristics Ambient temperature Operating: 0 to 55C Storage: -20 to 85C Overvoltage category III Pollution degree 2 P2RVC-8-I-F (for G2RV-SL700-AP series only) List of Models Model number P2RVC-8-I-F Description Connection PLC Output Interface for 8x G2RV-SL700-series PNP - type Ribbon cable connector 10 Pole, IEC603/1 Specifications Input Electrical schematic P2RVC-8-I-F Rated voltage 30 VAC/VDC max. Current capacity 0.5 A per channel 11 12 2.0 A total current, power supply terminal Characteristics Ambient temperature Operating: 0 to 55C Storage: -20 to 85C Overvoltage category III Pollution degree 2 Slim Relay G2RV 5 Cables for PLC Interface P2RVC-8-@-F Cables selection List Model number P2RV-4-100C Output To be used for (combined with P2RVC-8-O-F) CJ1W-OD232/OD262 P2RV-4-200C CJ1W-OD232/OD262 P2RV-4-300C CJ1W-OD232/OD262 P2RV-4-500C CJ1W-OD232/OD262 P2RV-A100C P2RV-A200C P2RV-A300C P2RV-A500C P2RV-A050C-OMR GRT1 P2RV-A100C-OMR GRT1 P2RV-A050C-OMR NX P2RV-A100C-OMR NX P2RV-200C-SIM S7/300 P2RV-250C-SIM S7/300 P2RV-300C-SIM S7/300 P2RV-500C-SIM S7/300 P2RV-200C-SIM S7/400 P2RV-250C-SIM S7/400 P2RV-300C-SIM S7/400 P2RV-500C-SIM S7/400 Universal (stranded wires) Universal (stranded wires) Universal (stranded wires) Universal (stranded wires) GRT1-OD8(G)-1 GRT1-OD8(G)-1 NX-OD4256 NX-OD4256 6ES7 322-1BL00-0AA0, 32DO 6ES7 322-1BL00-0AA0, 32DO 6ES7 322-1BL00-0AA0, 32DO 6ES7 322-1BL00-0AA0, 32DO 6ES7422-1BL00-0AA0 & 6ES7422-7BL00-0AB0, 32DO 6ES7422-1BL00-0AA0 & 6ES7422-7BL00-0AB0, 32DO 6ES7422-1BL00-0AA0 & 6ES7422-7BL00-0AB0, 32DO 6ES7422-1BL00-0AA0 & 6ES7422-7BL00-0AB0, 32DO Model number P2RV-4-100IFC P2RV-4-100IMC P2RV-4-200IFC P2RV-4-200IMC P2RV-4-300IFC P2RV-4-300IMC P2RV-4-500IFC P2RV-4-500IMC P2RV-A100C P2RV-A200C P2RV-A300C P2RV-A500C P2RV-A050IC-OMR GRT1 P2RV-A100IC-OMR GRT1 P2RV-A050IC-OMR NX P2RV-A100IC-OMR NX P2RV-200C-SIM S7/300 P2RV-250C-SIM S7/300 P2RV-300C-SIM S7/300 P2RV-500C-SIM S7/300 P2RV-200C-SIM S7/400 P2RV-250C-SIM S7/400 P2RV-300C-SIM S7/400 P2RV-500C-SIM S7/400 Input To be used for (combined with P2RVC-8-I-F) CJ1W-ID231/ID233/ID261 CJ1W-ID233/ID262 CJ1W-ID231/ID233/ID261 CJ1W-ID233/ID262 CJ1W-ID231/ID233/ID261 CJ1W-ID233/ID262 CJ1W-ID231/ID233/ID261 CJ1W-ID233/ID262 Universal (stranded wires) Universal (stranded wires) Universal (stranded wires) Universal (stranded wires) GRT1-ID8-1 GRT1-ID8-1 NX-ID4442 NX-ID4442 6ES7 321-1BL00-0AA0, 32DI 6ES7 321-1BL00-0AA0, 32DI 6ES7 321-1BL00-0AA0, 32DI 6ES7 321-1BL00-0AA0, 32DI 6ES7421-1BL00-0AA0 & 6ES7421-1BL01-0AA0, 32DI 6ES7421-1BL00-0AA0 & 6ES7421-1BL01-0AA0, 32DI 6ES7421-1BL00-0AA0 & 6ES7421-1BL01-0AA0, 32DI 6ES7421-1BL00-0AA0 & 6ES7421-1BL01-0AA0, 32DI P2RV-4-@@@C P2RV-4-@@@IMC P2RV-4-@@@IFC Cable to connect CJ1 to 4 x P2RVC-8-@-F List of Models I/O Output Input Input Model number P2RV-4-100C P2RV-4-200C P2RV-4-300C P2RV-4-500C P2RV-4-100IMC P2RV-4-200IMC P2RV-4-300IMC P2RV-4-500IMC P2RV-4-100IFC P2RV-4-200IFC P2RV-4-300IFC P2RV-4-500IFC Cable length 1.0 m 2.0 m 3.0 m 5.0 m 1.0 m 2.0 m 3.0 m 5.0 m 1.0 m 2.0 m 3.0 m 5.0 m Interface unit P2RVC-8-O-F x4 PLC Connection Connectors OMRON PLC MIL40 - MIL10 CJ1 Series: MIL x 4 P2RVC-8-I-F x4 OMRON PLC CJ1 Series: MIL MIL40 - MIL10 x4 P2RVC-8-I-F x4 OMRON PLC CJ1 Series: Fujitsu FCN40 -MIL10 x4 P2RV-4-@@@C/P2RV-4-@@@IMC P2RV-4-@@@IFC 10 9 10 CN1 9 CN2 2 1 10 9 A1 CN3 9 CN2 2 1 10 9 CN3 CN3 B20 1 CN2 B1 2 10 A20 (45) 1 9 2 1 (45) CN4 Cable length as indicated by model number. @@@ = length in centimeters P2RV-4-@@@IFC 2 1 10 9 CN4 (300) P2RV-4-@@@C/P2RV-4-@@@IMC Slim Relay G2RV 2 10 CN4 Cable length as indicated by model number. @@@ = length in centimeters 6 1 CN3 40 2 10 CN2 39 2 CN1 CN1 CN1 1 9 (300) 2 1 CN4 4 x 10 pole IDC mounting to 4 x P2RVC-8-@-F P2RV-4-@@@C CN1 CN1 1 2 3 4 5 6 CN2 7 8 9 10 1 2 3 4 5 CN3 6 7 8 9 10 1 2 3 4 5 6 CN4 7 8 9 10 1 2 3 4 5 6 7 8 9 10 40 Pole Cable length as indictad by model number. @@@ = length in centimeters CN2 CN3 40 38 36 34 32 30 28 26 22 24 39 37 35 33 31 29 27 25 21 23 20 18 16 14 12 10 8 6 2 4 19 17 15 13 11 6 7 8 9 10 1 5 20 18 16 14 12 10 8 6 NC 4 19 17 15 13 11 7 8 9 10 1 9 7 5 1 3 6 7 8 9 10 9 7 5 NC 3 7 8 9 10 Split into 4 sections Length = 30 cm CN4 P2RV-4-@@@IMC CN1 1 2 3 4 5 6 CN2 7 8 9 10 40 38 36 34 32 30 28 26 NC 24 1 2 3 4 5 CN3 6 7 8 9 10 1 39 37 35 33 31 29 27 25 NC 23 2 3 4 5 CN4 2 3 4 P2RV-4-@@@IFC CN1 1 2 3 4 5 6 CN2 7 8 9 10 A1 A2 A3 A4 A5 A6 A7 A8 NC A9 1 2 3 4 5 CN3 6 7 8 9 10 1 A10 A11 A12 A13 A14 A15 A16 A17 NC A18 2 3 4 5 6 CN4 B1 B2 B3 B4 B5 B6 B7 B8 NC B9 2 3 4 5 6 B10 B11 B12 B13 B14 B15 B16 B17 NC B18 40 pole IDC mounting to Omron PLC CJ1-OD232 Technical data Control line Diameter cable Operating voltage Continuous current per signal wire Max. total current, 4 bytes, each Test voltage Operating temperature range AWG28/0.08 mm2, tin-plated copper 10.7 mm (one end splits into 4 sections: A, B, C, D) 60 VDC 0.5 A 1.0 A 0.5 KV, 50 Hz, 1 min -20C to +50C P2RV-A@@@C Cable, single sided 10 pole IDC connector, to connect to P2RVC-8-@-F List of Models Model number Cable length P2RV-A100C 1.0 m P2RV-A200C 2.0 m P2RV-A300C 3.0 m P2RV-A500C 5.0 m Interface unit P2RVC-8-@-F PLC interface - Connectors MIL10 No connector 1 2 1 10 9 ?X ?V ?T ?R ?P I/O Universal (Output/ Input) (45) 10 Cable length as indicated by model number. @@@ = length in centimeters (2) (70) (10) Slim Relay G2RV 7 10 pole IDC mounting to P2RVC-8-@-F GRAY /BLACK GRAY /RED 8 ORANGE/BLACK 7 ORANGE/RED 6 GREEN/BLACK 5 GREEN/RED 4 PINK/BLACK 3 PINK/RED 2 BLUE/BLACK 1 BLUE/RED Cable length as indictad by model number. @@@ = length in centimeters 10 Pole 9 Open end 10 Outer isolation removed Technical data Control line Diameter cable Operating voltage Continuous current per signal wire Max. total current Test voltage Operating temperature range AWG26/0.14 mm2, tin-plated copper 7.6 mm 60 VDC 0.5 A 1.0 A 0.5 KV, 50 Hz, 1 min -20C to +50C P2RV-A@@@C-OMR GRT1 P2RV-A@@@IC-OMR GRT1 List of Models I/O Output Input P2RV-A050C-OMR GRT1 Cable Interface unit length 0.5 m P2RVC-8-O-F P2RV-A100C-OMR GRT1 1.0 m P2RV-A050IC-OMR GRT1 0.5 m P2RV-A100IC-OMR GRT1 1.0 m Model number P2RVC-8-I-F PLC interface Connectors OMRON Smart XW7E 12pole slice I/O module MIL10 GRT1 Series GRT1-OD8(G)-1 OMRON Smart slice I/O module GRT1 Series GRT1-ID9(G)-1 A1 B1 1 10 9 ?X ?V ?T ?R ?P 2 (45) A6 Cable length as indicated by model number. @@@ = length in centimeters 10 pole IDC mounting to P2RVC-8-@-F P2RV-A@@@C-OMR GRT1 P2RV-A@@@IC-OMR GRT1 1 A1 1 B6 2 B1 2 A6 3 A2 3 B4 4 B2 4 A4 5 A4 5 B3 6 B4 6 A3 7 A5 7 B1 8 B5 8 A1 9 NC 9 B2 10 B6 10 NC 8 Slim Relay G2RV B6 (45) P2RV-A@@@C-OMR NX P2RV-A@@@IC-OMR NX List of Models I/O Output Input Cable Interface unit length 0.5 m P2RVC-8-O-F 1.0 m 0.5 m P2RVC-8-I-F 1.0 m Model number P2RV-A050C-OMR GRT1 P2RV-A100C-OMR GRT1 P2RV-A050IC-OMR GRT1 P2RV-A100IC-OMR GRT1 PLC interface OMRON I/O module NX Series Connectors XW7F 16poleMIL10 A1 B1 1 10 9 ?X ?V ?T ?R ?P 2 (45) Cable length as indicated by model number. @@@ = length in centimeters B6 A6 (45) 10 pole IDC mounting to P2RVC-8-@-F P2RV-A@@@C-OMR NX P2RV-A@@@IC-OMR NX 1 A1 1 B7 2 B1 2 A7 3 A3 3 B5 4 B3 4 A5 5 A5 5 B3 6 B5 6 A3 7 A7 7 B1 8 B7 8 A1 9 NC 9 B8 10 B8 10 NC P2RV-@@@C-SIM S7/@00 Cables to connect Siemens S7/300 or S7/400 to 4 x P2RVC-8-@-F List of Models Model number Cable length P2RV-200C-SIM S7/300 2.0 m P2RV-250C-SIM S7/300 2.5 m P2RV-300C-SIM S7/300 3.0 m P2RV-500C-SIM S7/300 5.0 m P2RV-200C-SIM S7/400 2.0 m P2RV-250C-SIM S7/400 2.5 m P2RV-300C-SIM S7/400 3.0 m P2RV-500C-SIM S7/400 5.0 m PLC type Configuration Siemens S7/300 4x1 Byte Siemens S7/400 4x1 Byte Slim Relay G2RV 9 Single Relays for Maintenance Model Number Legend G2RV-@ - @ @ @ - @- @ 1 2 3 4 5 6 4. Relay Test switch Blank: No test switch I: Test switch 5. Contact Material Blank: AgSnIn AP: AgSnIn hard gold-plated 6. Rated Coil Voltage 1. Number of Poles 1: 1 pole 2. Terminals S: Plug-In 3. Relay LED Blank: Without LED 11 VDC, 21 VDC, 48 VDC List of Models G2RV-1-SI G2RV-1-S Model number G2RV-1-S 11 VDC G2RV-1-S 21 VDC Replacement for G2RV-SL700/500 12 VDC G2RV-SL700/500 24 VDC G2RV-SL700/500 24 VAC/DC G2RV-1-S 48 VDC G2RV-SL700/500 48 VAC/DC G2RV-SL700/500 110 VAC G2RV-SL700/500 230 VAC G2RV-1-S-AP 11 VDC G2RV-SL700/500-AP 12 VDC G2RV-1-S-AP 21 VDC G2RV-SL700/500-AP 24 VDC G2RV-SL700/500-AP 24 VAC/DC G2RV-1-S-AP 48 VDC G2RV-SL700/500-AP 48 VAC/DC G2RV-SL700/500-AP 110 VAC G2RV-SL700/500-AP 230 VAC G2RV-1-SI 21 VDC G2RV-SL701/501 24 VDC G2RV-SL701/501 24 VAC/DC Cross bars Model Number Legend P2RVM -@ @ 1 2 1. Number of Poles 020: 2 poles 030: 3 poles 040: 4 poles 100: 10 poles 200: 20 poles 2. Color R: Red S: Blue B: Black Specification List of Models Model number Poles P2RVM-020@ 2 P2RVM-030@ 3 P2RVM-040@ 4 P2RVM-100@ 10 P2RVM-200@ 20 Color Red (R) Blue (S) Black (B) @ select color: R = Red, S=Blue, B=Black Plastic Labels for G2RV Sockets Model number R99-15 for G2RV 10 Box quantity Color 1 piece = 1 sheet = 120 labels White Slim Relay G2RV Max current (EN60947-7-1 section 8.3.3 / 1991) 32 A Max. Voltage 400 VAC Max. Voltage when cutting Cross-bar without using separation plate or end-bracket 250 VAC Labels (Stickers) for G2RV Sockets Model number R99-16 for G2RV Box quantity Color 1 piece = 1 sheet = 484 labels White (stickers) Separating Plates Model number P2RV-S Description Provides isolation between adjacent relays to achieve 400 V isolation. Slim Relay G2RV 11 Dimensions Note: All units are in millimeters unless otherwise indicated. Complete Unit G2RV-SL700 G2RV-SL700-AP Dimensions Terminal Arrangement Input circuit 12 11 14 106.7 max. 12 83 70.9 47.2 6.2 max. A2 11 A1 14 26.1 24 V DC Terminal Arrangement/ Internal Connections (Top View) 12 11 35 92.7 max. 14 A2 A1 Other Coil Voltage Terminal Arrangement/ Internal Connections (Top View) Five, M2.5 x 6 88.9 A2 7.1 99.2 A1 12 V DC Terminal Arrangement/ Internal Connections (Top View) G2RV-SL701 Dimensions Terminal Arrangement Input circuit 12 11 14 109.7 max. 12 83 70.9 47.2 A2 11 A1 14 26.1 6.2 max. 24 V DC Terminal Arrangement/ Internal Connections (Top View) 12 11 35 92.7 max. 14 A2 A1 Other Coil Voltage Terminal Arrangement/ Internal Connections (Top View) Five, M2.5 x 6 88.9 102.2 A2 7.1 A1 12 V DC Terminal Arrangement/ Internal Connections (Top View) 12 Slim Relay G2RV G2RV-SL500 G2RV-SL500-AP Dimensions Terminal Arrangement Input circuit 12 11 14 106.7 max. 12 82.9 69.8 46 6.2 max. 24.6 A2 11 A1 14 24 V DC Terminal Arrangement/ Internal Connections (Top View) 12 A2 11 35 97.4 max. A1 14 Other Coil Voltage Terminal Arrangement/ Internal Connections (Top View) A2 7.1 88.9 A1 99.2 12 V DC Terminal Arrangement/ Internal Connections (Top View) Dimensions G2RV-SL501 Terminal Arrangement Input circuit 12 11 14 109.7 max. 12 82.9 69.8 6.2 max. 46 24.6 A2 11 A1 14 24 V DC Terminal Arrangement/ Internal Connections (Top View) 12 11 35 97.4 max. 14 A2 A1 Other Coil Voltage Terminal Arrangement/ Internal Connections (Top View) 88.9 102.2 A2 7.1 A1 12 V DC Terminal Arrangement/ Internal Connections (Top View) Slim Relay G2RV 13 Single Relay G2RV-1-S G2RV-1-S-AP 30.5 max. 5.2 max. 33 max. 16.2 Input circuit 14 11 12 A1 A2 Terminal Arrangement/ Internal Connections (Bottom View) 1.8 0.5 2.4 3.5 5.04 5.04 22 3 G2RV-1-SI 5.2 max. 30.5 max. Input circuit 36 max. 14 11 12 16.2 1.8 Terminal Arrangement/ Internal Connections (Bottom View) 0.5 2.4 3.5 5.04 5.04 22 14 Slim Relay G2RV 3 A1 A2 Installation Tools G2RV-SL70@ series: Flat-Blade screwdriver should be used for mounting and / or releasing cables. G2RV-SL50@ series: Flat-Blade screwdriver should be used for mounting stranded wires without ferrules and / or releasing cables. Applicable Screwdriver Flat-blade, Parallel-tip, 2.5 mm diameter (3.0 mm max.) Flat-blade, Parallel-tip 2.5 dia. (3.0 mm max.) Flat-blade, Flared-tip Cannot be used. Examples: FACOM AEF.2.5x75E (AEF. 3x75E) VESSEL No. 9900-(-)2.5x75 (No. 9900-(-)3x100) WAGO 210-119 WIHA 260/2.5x40 (260/3x50) *Chamfering the tip of the driver improves insertion when used as an exclusive tool. P2RVC-8-O-F (for G2RV-SL70@ series only) List of Models Model number P2RVC-8-O-F Description Connection PLC Output Interface for 8x G2RV-SL70@-series PNP - type Ribbon cable connector 10 Pole, IEC603/1 Applicable Wires Applicable Wire Sizes G2RV-SL700 Series Box clamp technology Wire type Applicable wire size Stripping length Stranded without ferrules 0.5 - 2.5 mm2 7 mm Stranded with ferrules and plastic collar 0.5 - 2.5 mm2 7 mm 0.5 - 2.5 mm 2 7 mm 0.5 - 2.5 mm 2 7 mm Stranded with ferrules without plastic collar Solid G2RV-SL500 Series Push-in technology Wire type Applicable wire size Stripping length Stranded without ferrules 0.5 - 2.5 mm 2 12 mm Stranded with ferrules and plastic collar 0.5 - 2.5 mm2 12 mm Stranded with ferrules without plastic collar 0.5 - 2.5 mm2 12 mm Solid 0.5 - 2.5 mm2 12 mm Slim Relay G2RV 15 Wiring Use wires of the applicable sizes specified above. The length of the exposed conductor should be 7 mm for a G2RV-SL700 series, 12 mm for a G2RV-SL500 series. G2RV-SL700 7 mm G2RV-SL500 12 mm Fig. 1 Exposed Conductor Length Wiring Procedure for G2RV-SL500 series Screwdriver hole Wire connection hole Wiring Removing Wire Insert the exposed conductor into the connection hole. Insert the specified screwdriver into the release hole. No other tools are required. Removing wire. Note: In case of wiring stranded wires without ferrules screwdriver should be inserted before inserting the wire. Screwdriver should be removed after fully insertion of the wire. Removing screwdriver. 16 Slim Relay G2RV Precautions Precautions for Connection * Do not move the screwdriver up, down, or from side to side while it is inserted in the hole. Doing so may cause damage to internal components (e.g., deformation of the clamp spring or cracks in the housing) or cause deterioration of insulation. * Do not insert the screwdriver at an angle. Doing so may break the side of socket and result in a short-circuit. * Do not pour water or cleansing agents on the product. Doing so may result in electric shock. * Do not use the socket in locations subject to solvents or alkaline chemicals. * Do not use the socket in locations subject to ultraviolet light (e.g., direct sunlight). Doing so may result in markings fading, rust, corrosion, or resin deterioration. * Do not dispose the product in fire. Removing from Mounting Rail To remove the socket from the mounting rail, insert the tip of screwdriver in the fixture rail, and move it in the direction shown below. * Do not insert two or more wires in the hole. Wires may come in contact with the spring causing a temperature rise or be subject to sparks. Precaution for Operation of Test switch Tool: G2RV-SL701/501 series: 2.5 mm width Flat-Blade screwdriver should be used for operation of test switch. * Insert the screwdriver along the hole wall as shown below. Flat-blade, Parallel-tip, 2.5 mm diameter (3.0 mm max.) Flat-blade, Parallel-tip Screwdriver 2.5 dia. (3.0 mm max.) Flat-blade, Flared-tip * If lubricating liquid, such as oil, is present on the tip of screwdriver, the screwdriver may fall out resulting in injury to the operator. * Insert the screwdriver into the bottom of the hole. It may not be possible to connect cables properly if the screwdriver is inserted incorrectly. General Precautions * Do not use the product if it has been dropped on the ground. Dropping the product may adversely affect performance. * Confirm that the socket is securely attached to the mounting track before wiring. If the socket is mounted insecurely it may fall and injure the operator. * Ensure that the socket is not charged during wiring and maintenance. Not doing so may result in electric shock. Cannot be used. Cautions: * When you operate a test switch, please turn off electrical power supply. * After you have finished to operate a test switch, return the test switch to its original state * Do not use test switch as a switch. * Durability of test switch operation is more than 100 times. * Please avoid to use the latching lever by ON state with carry current in long time, more than 24 hours to maintain the initial performance for operation checking. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. J11E-EN-07 In the interest of product improvement, specifications are subject to change without notice. Slim Relay G2RV 17